bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 5 Inch
  4. For 3500 lbs Axles
  5. Hub
  6. Pre-Greased
  7. Standard
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased

Item # AKIHUB-550-35-K
lowest price pledge
Our Price: $34.67
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 9 lbs
Quantity: 
etrailer 13 Inch Wheel,14 Inch Wheel,14-1/2 Inch Wheel,15 Inch Wheel Trailer Hubs and Drums - AKIHUB-550-35-K
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Lowest Prices for the best trailer hubs and drums from etrailer. Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased part number AKIHUB-550-35-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (57)
  • Q & A (0)
  • Photos
  • Why etrailer?

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-550-35-K

  • 5 on 5 Inch
  • For 3500 lbs Axles
  • Hub
  • Pre-Greased
  • Standard
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 1/2 Inch Stud
  • L44649
  • L68149
  • etrailer

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Sturdy iron construction
  • Zinc-enriched paint finish
  • Pre-greased idler hub is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 5"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.988"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KH-550-07-19 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 5 - Pre Greased

Compare to Dexter 84550BX






Customer Reviews

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased - AKIHUB-550-35-K

Average Customer Rating:  4.8 out of 5 stars   (57 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.

by:

I had an extremely hard setup and the customer service was great. However, the outer bearing and race were wrong. Sadly, the only info I had was for the outer bearing and race. Kudos for guessing the correct inner and even the grease seal size. Doesn't really count though as the the info I was able to provide missed the mark badly. Like 1/4" badly.


Comments
I am wondering if the wrong assembly was sent. Are you able to tell me color the dot is on the hub?
-- Etrailer Expert Brooke M - 06/21/2022


by:

So far so good, even with the extra stress of the wide wheels. I even bought an extra hub to keep in the tool box for a road side repair.


Comments
Still working great. It has been across several states, rough highways and dirt roads. Can’t complain.
Zg - 05/22/2021


by:

Perfect fit for my 5x12 trailer! The ordering and shipping process was great. Preston was great in matching my old hubs to the new ones. This was my first hub replacement job and I was done in an hour.
Will be a repeat customer!!!!




by:

Good shipping time, great part, everything as advertised




by:

The part, (5 on 5" hubs), worked perfectly, and were priced well and delivered on time. The only down side to my order is that we first accidentally ordered a complete axle assembly, hub-to-hub with 5 on 4.5" bolt pattern instead of the aforementioned 5 on 5". We called to get the right hubs sent and thought we could return the unused 5 on 4.5" hubs. Since we packed the bearings and mounted the hubs on the axle, we were told they were now used and could not be returned. They had not made one revolution on the spindle or borne any weight/load. I now have two small boat anchors. I'm very disappointed that we could not clean all the parts and return them. All of this occurred while stranded 250 miles from home while towing a tractor on our flatbed trailer. The new axle and hubs were installed while parked on a gravel road and we're traveling home as I write this. Again, the parts are working well, but the customer service part of the deal could have been better by allowing a return of the hubs we could not use.




by:

I ordered a 5 on 5 hub back in August. I got the hub. You sent me a 5 on 4.75. Great customer service...NOT!


Comments
I apologize for the inconvenience. Customer Service will reach out to you.
-- Etrailer Expert Sierra K - 11/29/2021


by:

Excellent value! I can't say enough good things about eTrailer. Awesome and helpful website, great products, best prices, excellent customer service.

This product allowed me to replace the bad bearings on my trailer in about a half hour. No cleaning old grease out of hubs, no trying to get old races out, and all for the price other places will charge for bearings alone!

I had a slightly rare 5 on 5 bolt pattern, which was impossible to find in local stores. No problem at eTrailer! They always have a great selection and get it to me very quickly. I've finally learned not to waste my time shopping around and to just come here first!




by:

Received 5 on 5 hub today and it fit perfectly. I first ordered a 5 on 4 3/4 hub and it was wrong. I had measured the bolt pattern across the hub from center to center stud for 3500 lb axle. That is the way we did it back in the day 30 years ago. Well after talking to Jamie at etrailer she explained I was wrong and had me measure stud to stud beside each other also and explained I needed 5 0n 5.She was very professional and very detailed and had me measure several times to make sure I received the right hub. Well she was right and it fit perfect. I will be buying all my trailer parts from etrailer from here on. Jamie your the the best. Its hard to find people who care or even try to help with anything anymore but Jamie acted like she had all day to help me. Thanks again




by:

Finally found the right part at etrailer!! Thank you! This hub isn't common at the parts stores and I couldn't find it locally. Comes with everything you need. You'll have to grease the bearings yourself so have some packing grease handy. I'd share pics but I already fixed the trailer and put it back outside in the cold :)
Oh, and the part came a day earlier than I expected. Thanks for that too!




by:

I bought these as spares to carry on trips. After having a bearing failure while towing my race car I became a big believer in having spares. I now replace bearings/races every other year as preventive maintenance even if they look ok. Bearings are all made in China so I think quality varies, regular maintenance is a must. The price is awesome compared to the local trailer dealer for the same product. etrailer is awesome great prices and fast shipping.




by:

I have received all four hubs, it was the exact match for our application. Everything came as expected. Service is prompt, nice folks to deal with even on the phone.
I am a repeat customer.
I gave it 5 star, however if I had done a bit more research on the website for whole package with EZ grease part and new axle nut and hardware it would have been great but its my fault I got exactly what I ordered according to the part numbers.
I am pleased with etrailer.




by:

Ended up having to replace axle after ordering hub and spindle. Excellent order help, fast customer service. Everyone sells parts. It's the other elements of service that count. etrailer worked like that for me.




by:

I was taking a gamble at the hub I ordered for my 26 year old flatbed trailer but the description said it was a very common format and to my pleasure it fit perfectly.
The old hub had a loose inner race which I knew couldn't be good so It had to be replaced. Thyanks guys for accurate discriptions and standing by your products.
Sincerely,
James Cassity




by:

i replaced the four hubs and bearings on my trailer. i only took two hours thanks to the instructional videos. everything went smooth.




by:

I Used the hub bearing assembly on my 16ft trailer. It was easy to install and have had no problems to date. I use my trailer 3-4 time a month




by:

Arrived in two days ground. Super easy to install. Took more time packing the bearings by hand than all the rest of the job. I had to replaced the other side because the bearings went out. Wasn't sure which hub I ordered. Called etrailer and the lady was very helpful and was able to look up my last order and confirm the hub I ordered. Great service.




by:

Product is great quality. Spindle is well made and perfect for making the spare tire carrier. “Bridget” in customer service was outstanding!




by:

My trailer parts seemed to be competitively priced and they were delivered promptly. The website was helpful in finding the right parts and had good information for the installation. I would recommend etrailer to a friend.




by:

great product and great service from the etrailer company
thanks to Ms. Courtney '''' for getting my parts to me quick, on the road again.
Brookhaven Mississippi , try etrailer




by:

The product was delivered as scheduled and was exactly what I ordered. I have never had any problems getting any orders or information from etrailer. The people are courteous and very knowledgeable.




by:

As always, my order was exactly what I needed for a long trip to ensure a problem free trip. The quality is good.


Comments
After many thousands of miles, still a good trouble free product. It makes traveling worry free.
Mike B - 08/11/2020


by:

Order process was seamless. Product was shipped right away and arrived on time. Product was replacement hubs for my trailer which were good quality and an exact fit. Would highly recommend etrailer to anyone!




by:

Everything went together just like it should. Very easy and quick to assemble after watching the video. Now I can get the trailer back in use instead of it being a lawn ornament. Thanks.




by:

Could have included the castle nut and washer but cant be at the deal or the ease of ordering.




by:

fast. I did not think it could have been shipped so fast, fantastic. price and shipping. I will buy from you again--no problem here---thank you



25
57
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums



  • Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?
    First things first; you can determine the specs on your current axle by checking for a sticker or plate attached to the axle itself (you'll usually find it close to the center of the axle). But with that being said, in the event that you can't find anything on the axle itself that would specify the capacity, you'll want to use the bolt pattern on your hubs and the bearings to provide you with a matching hub for your axle and spindle. I'll also say that the L68149 and L44649 are two of the...
    view full answer...
  • What Size Trailer Wheel Center Hole Fits Trailer Idler Hub for 3,500lb Axles 5 on 5 AKIHUB-550-35-K
    Basically, 2.62 inches is the smallest wheel pilot hole for Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 Item # AKIHUB-550-35-K. The hub takes wheels as small as 14 inches and the smallest pilot hole diameter on a 14 inch wheel is 2.62 inches. The vast majority of 14 inch wheels will have a 3.19 or 3.27 inch pilot hole though.
    view full answer...
  • Replacement Idler Hub Recommendation for 1999 EZ Loader Trailer
    The hub part # AKIHUB-550-35-K will work for you with it's included grease seal. The outer diameter may be different, but since that is what fits to the hub (what you are replacing) it would not matter. The inner diameter matches up which is the most important.
    view full answer...
  • What Spindle Will Etrailer.com Trailer Idler Hub Assembly # AKIHUB-550-35-K Fit
    The Trailer Idler Hub Assembly for 3,500 Pound Axles - 5 on 5 # AKIHUB-550-35-K referenced in your question are compatible with 3,500 pound axles with #84 spindles like the Redline # R20384EZ. I have attached an image showing the dimensions of this spindle for your review. This hub assembly includes the L68111 inner race and L44610 outer race as well as the inner bearing L68149 and outer bearing L44649.
    view full answer...
    Image 1 for
  • What is Hub Pilot Diameter of Trailer Hub # AKIHUB-550-35-K
    The hub pilot diameter of the hub part # AKIHUB-550-35-K is 2.62 inches. That means that a trailer wheel would need to have a pilot diameter of at least 2.62 inches.
    view full answer...
  • Availability of Pre-Greased 3500 lb Idler Hub With 5 on 5 Wheel Bolt Pattern
    We do indeed offer an idler hub with a 5 on 5 inch wheel bolt pattern for a 3500 lb axle. The # AKIHUB-550-35-K uses the L68149 inner and L44649 outer bearing, you might want to check the reference numbers on your existing bearings to ensure that this replacement hub will be compatible with your spindles. The hub is pre greased, and includes the inner and outer bearing, the races, the grease seal, dust cover and 1/2 inch lug nuts. The bearings are pre-packed so all you'll need to do is...
    view full answer...
  • Availability of Trailer hub with 5 on 5 inch Bolt Pattern
    We have replacement hubs for trailers that have the 5 on 5 inch bolt pattern you have but they'll need to be 3,500 lb axle assemblies as that's only capacity we have that bolt pattern in. For a hub drum you'd want the # AKHD-550-35-EZ-K or for an idler part # AKIHUB-550-35-K. To verify your axle capacity you can check the axle for a plate with ID info and the capacity should be listed there. Or you can measure diameter of axle and if it's 2-3/8 that would indicate it's 2,500 as well.
    view full answer...
  • Timbren 3500 lb Rated Axle-Less Suspension and Compatible Idler Hub for Home Made Trailer
    The 3500 lb Timbren Axle-Less suspension kit # ASR3500S05 would be a good choice. The spindles provided with the # ASR3500S05 would indeed be compatible with the bearing set provided with the # AKIHUB-550-35-K idler hub, but since the Timbren Axle-Less suspension you've chosen features E-Z lube spindles, you'd want to go with # AKIHUB-550-35-EZ-K which provides the E-Z lube compatible dust caps with removable plugs so you can easily access the grease zerk without needing to remove the entire...
    view full answer...
  • Will the Trailer Idler Hub Assembly AKIHUB-550-35-K Work With Vehicle Wheels
    The Trailer Idler Hub Assembly part # AKIHUB-550-35-K is designed to be used with lug piloted trailer wheels with a 5 on 5" bolt pattern like the Dexstar Steel Spoke Trailer Wheel part # AM20428. In regards to compatibility with vehicle wheels; this is usually not possible because of the bolt pattern not aligning, there being an offset, and some being hub-centric. Therefore, I cannot recommend this.
    view full answer...
  • Replacement Hubs and U-Bolt Kit for 3,500 Pound Lippert Axle # LC35212150
    From my research your axle is a 3,500 pound, 2-3/8 inch diameter axle and since you have a 5 on 5 bolt pattern you likely have bearings # L44649 and # L68149. You'll want to verify this is correct with your current bearings. If this is the case for a hub and drum assembly I recommend # AKHD-550-35-EZ-K which is for E-Z Lube axles with a zerk fitting. If you have standard axles use # AKHD-550-35-K instead. If you only need idler hubs use # AKIHUB-550-35-EZ-K with E-Z Lube axles and #...
    view full answer...
  • Replacement Spindle and Hub for my Lippert 3500# Axle
    The #84 Spindle for 3,500-lb Trailer Axles part # TRU84FR and the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-550-35-K for a 5 on 5" wheel bolt pattern or the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K for a 5 on 4.5" bolt pattern will have you set up and ready to go.
    view full answer...
  • Availability Of Trailer Idler Hub With 5 on 5 Bolt Pattern
    Currently the only trailer hubs we offer with a 5 on 5 bolt pattern are the Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-550-35-K, and the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # AKIHUB-550-35-EZ-K which both have an outer diameter of 6-1/4". Both of these hubs are designed for spindles that use inner bearing # L68149 and outer bearing # L44649. To confirm that these hubs will fit your spindles you will want to remove one of your current hubs and verify that...
    view full answer...
    Image 1 for Image 2 for
  • Availability of 3,500 lb Trailer Hub with 5 on 5 inch Bolt Pattern
    For a 3,500 lb axle hub that has a 5 on 5 inch bolt pattern the part # AKIHUB-550-35-K would be what you'd want.
    view full answer...
  • Recommended Trailer Hubs With 5 on 5 Inch Bolt Pattern
    We have a few 5 on 5 inch hubs. They are all for 3,500 lb axles and have # L68149 inner bearing with 1.378 inch inner diameter and # L44649 outer bearings with 1.063 inner diameter. I've attached the link to the page of all your options which has both idler hubs like # AKIHUB-550-35-K and electric drum hubs like # AKHD-550-35-K.
    view full answer...
  • Timbren Axle Less Setup for Off Road Camper that Uses Jeep Wheel Bolt Pattern
    For a Timbren Axle Less kit that can have a hub installed on it that uses the Jeep bolt pattern of 5 on 5 inch you'd want the part # ASR1THDS03 which also has a 4 inch lift built into it and a wider spindle setup that allows for wider tires as well. For an idler hub with the right bolt pattern that fits this you'd need the part # AKIHUB-550-35-K. For a hub drum we have the # AKHD-550-35-EZ-K.
    view full answer...
  • Trailer Hub Replacement for Dexter 8-248 With 5 on 5 inch Bolt Pattern
    Make sure you are measuring from wheel stud center to wheel stud center when trying to determine the bolt pattern. The measurement you mentioned doesn't really match but it's very close to 3 inch which would be 5 on 5 inch. The correct idler hub to replace your Dexter 8-248 and has a 5 on 5 inch bolt pattern is # AKIHUB-550-35-K. I attached a help article on determining wheel bolt patterns for you to check out as well.
    view full answer...
  • Dexter 008-256-07 Trailer Hub Replacement
    The hub you have is a 3,500 lb idler hub that has a 5 on 5 inch bolt pattern so you'd want the part # AKIHUB-550-35-K and you'd be set! This comes with bearings, lug nuts, a grease seal, and a grease cap/dust cover. Or, we have the part # 84550UC1-EZ which is already pre-greased and ready to install.
    view full answer...
    Image 1 for
  • Axle and Hub Solution for Home Made Trailer Using Jeep Wheels with 5 on 5 Bolt Pattern
    I have a solution for you, but without having an axle already, I wouldn't have a spindle and conversely the hubs to match it up to. With that being said, I would recommend going with the Timbren Heavy Duty Axle-less Trailer Suspension # ASR2KHDS03 and the etrailer Idler Hub # AKIHUB-550-35-K. I've seen a lot of Jeep-ers built their off-road trailers using the Timbren Axle-less suspension system and they really do a great job. This system has a completely independent suspension system...
    view full answer...
  • Does 3,500 lb Trailer Hub # AKIHUB-550-35-K Fit Timbren Axle Less Kit # ASR2KHDS03
    Yes, the Trailer Idler Hub Assembly # AKIHUB-550-35-K that you referenced does fit on the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03 that you referenced. This hub is designed for trailer wheels with diameters between 13 inch and 17 inch. It sounds like you may be wanting to install vehicle wheels on this trailer (this question comes up a lot with off road trailers) so you should note we cannot recommend this.
    view full answer...
  • Hub Recommendation for Timbren Axle-Less System ASR1THDS03 with Jeep Bolt Pattern
    Typically the Jeep wheel bolt pattern is 5 on 5 inch. For an idler hub that will fit the spindles of the part # ASR1THDS03 and have the correct bolt pattern we have the # AKIHUB-550-35-K. This is a 3,500 lb trailer hub. The # ASR1THDS03 has a 4 inch lift built into it so it would work well for you since your Jeep is also lifted.
    view full answer...
  • 2k Rated Axle System for Off Road Trailer and Hubs with 5 on 5 inch Bolt Pattern
    From the research I did the 2015 Jeep Wrangler with 17-18 inch wheels would have a 5 on 5 inch bolt pattern. For a 2k rated Timbren Axle Less system that has a 4 inch lift built into it and is setup for wider tires we have the part # ASR2KHDS03 and then for an idler hub that will fit the spindle that has the correct bolt pattern you would want the part # AKIHUB-550-35-K.
    view full answer...
  • Timbren Axle Less System for Trailer with Jeep 5 on 5 inch Bolt Pattern
    The Jeep wheel bolt pattern is 5 on 5 inch which we do have a way to accomplish what you are wanting. For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR2KHDS03 you would want the Trailer Hub part # AKIHUB-550-35-K. This hub includes the bearings that the Timbren is designed to fit. This setup has a 4 inch lift and the hubs have the 5 on 5 inch Jeep bolt pattern.
    view full answer...
  • Timbren Axle Less System with 5 on 5 inch Bolt Pattern
    For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR2KHDS03 you would want the Trailer Hub part # AKIHUB-550-35-K. This hub includes the bearings that the Timbren is designed to fit. This setup has a 4 inch lift and the hubs have the 5 on 5 inch Jeep bolt pattern.
    view full answer...
    Image 1 for
  • Timbren Axle-Less Trailer Suspension for Tear Trailer w/ Jeep Wheels
    Yes, you are correct the axle-less Timbren's are a great option. I recommend the Timbren Axle-Less Trailer Suspension System item # ASR1THDS03. These have a capacity of 2,200 lbs and are made specifically for off-road tires. The 4" Lift will provide greater ground clearance for your Jeep wheels. You will also need the etrailer Trailer Idler Hub Assembly for 3,500-lb Axles item # AKIHUB-550-35-K. These come pre-greased and have a 5 on 5 Inch bolt pattern. I have linked review videos for...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924