bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 6 on 5-1/2 Inch
  4. For 6000 lbs Axles
  5. Hub
  6. 14-1/2 Inch Wheel
  7. 15 Inch Wheel
  8. 16 Inch Wheel
  9. 16-1/2 Inch Wheel
Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased

Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased

Item # AKIHUB-655-6-EZ-K
Our Price: $70.55
Trailer Hubs and Drums
Shipping Weight: 14 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 6,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included. Great Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased part number AKIHUB-655-6-EZ-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (42)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-655-6-EZ-K

  • 6 on 5-1/2 Inch
  • For 6000 lbs Axles
  • Hub
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • Easy Grease
  • EZ Lube
  • Pre-Greased
  • 1/2 Inch Stud
  • 15123
  • 25580
  • etrailer

Hub is designed for use on trailer idler axles. Fits 6,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Zinc-enriched paint finish
  • Pre-greased idler hub is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • QAI and CSA certified


Specs:

  • Application: 6,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 14-1/2" to 16-1/2"
  • Bolt pattern: 6 on 5-1/2"
  • Wheel stud dimensions: 1/2" diameter x 1-1/4" long
  • Grease cap flange diameter: 2.45"
  • Weight capacity: 3,000 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 15123 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 15245
  • Grease seal (included): GS2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KH-655-07-19 AxleTek Trailer Idler Hub Assembly for 6K Axle with Hardware - 6 on 5-1/2 - EZ Lube - Pre Greased






Customer Reviews

Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased - AKIHUB-655-6-EZ-K

Average Customer Rating:  4.9 out of 5 stars   (42 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 6,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.

by:

Very professional from beginning and hanging phone.up.
Definitely I will do business again. Have a Nice day and Merry Christmas!!!

Dennis

12/13/2023

Great no problems.



by:

Good pricing and fast shipping. Great p roducts.



by:

I have been very happy of the prompt service and dedication etrailer has given me. I have bought several things from them over the years and will continue.
Thanks Again etrailer,



by:

Easy ordering and received quick. Already put on trailer and works great. Exact duplicate to what I had



by:

I have an old homemade trailer I use for hauling my tractor. The seals and bearings seemed to be failing on the front axle so after watching your video I decided to replace the hubs. I did order the wrong hub,the bearings were slightly larger than the ones on the old hub but after trying it anyway it looks like they are going to work just fine! Fast delivery. Pre-Greased hubs work great!



by:

Doesn’t fit inside the brake rotor on my dexter 6k hubs.

Etrailer Expert

Heather A.

9/2/2022

Hey Chris, it sounds like you have slip on disc brakes. Can you be more specific about why the idler hub does not fit inside? Is the bolt pattern different? This particular idler hub has a 6 on 5 and a half bolt pattern. If you let me know what you have on your trailer I can assist you further. A photo will help as well.



by:

These hubs arrived greased, assembled and ready for installation. Can't ask for more than that!



by:

Fit right and the hud doesn't brake like other hubs .we used on are equipment.



by:

got them a head of time. shipping was fast. didn't have any problem installing them.



by:

I ordered hub kit to replace the house trailer hubs on my trailer. This was the right fit and a great price.. The kit came with all the bearings, seals, dust caps, lug studs, and lug nuts.. Great place to pick up all your trailer needs!



by:


Greetings Nickey;
I received
the 4 hubs Yesterday and am glad to say, they are very Heavy Duty. My plans are to replace the Mobile Home hubs on my 18' trailer to have a modern trailer with heavy Duty hubs that use the more easily available 6 bolt wheels. The old style Mobile Home wheels W/ tires are no longer available in this area, and very expensive when you do locate any.
Many thanks for your follow-up, as this shows your concern for your products and most importantly,,,your customers.



by:

Shipping was extremely fast and great prices. The hubs arrived and were a perfect fit. Will definitely shop here again for any trailer needs! The wife's reaction when she grabbed the box from the UPS driver was priceless, she had no idea that 4 hubs would way so much lol.



by:

"I will give your company the highest rating I can. Service was good ,no problems. Parts came in quick. I had no trouble installing them."



by:

Excellent customer service which I find to be a dieing art, quick turnaround and I received exactly what they advertised. Quality parts and attention to detail. I’ll be ordering again and again.



by:

Worked well for the many miles we’ve put on them! Etrailer also has the best customer service! I had to call and ask a few questions before placing an order and they answered everything without hesitation.



by:

Great product and price.

Bruce H.

6/12/2018

The parts worked out great. You are a great source for trailer parts and you are well regarded.



by:

Hubs worked great on my old axle. Went right on and axle appears and works like new. Cost effective fix.



by:

Lightning fast shipping, great product!



by:

Everything I have purchased from you has been good quality and shipping is fast !! I would definitely recommend you to anyone. Thanks



by:

Fits the axle it said it would... working great one year later.



by:



by:

service could not have been any better product was received quicker than expected Thank you very much .



by:

Perfect fit ! Great service from Odelia! Package arrived 2 days early. Put the hubs on today, no problems! Will come back again as needed. Thanks



by:



by:

The only place for all your trailer needs, they have it all! Fast shipping too.


25
42
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • Locating Replacement Hubs for 2004 Four Winns Trailer
    In order to determine the correct replacement hubs for your 2004 Four Winns Trailer you will need to pull one of the assemblies. Once you have the hub removed take out the inner and outer bearings and look for a number that should be stamped right inside of each of them. If you can't read the numbers you can also take a few measurements along the spindle with a digital caliper. I have attached an image to assist. If you can tell me the numbers you found, or the measurements you took,...
    view full answer...
  • Solution for Trailer Hub Replacement for Dexter 8-233a
    I have an alternative solution for you to consider but based on the info you listed we don't have a standard trailer hub that will fit in place of what you have now. This is not uncommon as mobile home axles are generally considered to be one-time-use. Most likely you'll need new axles. We do have axles available if you need a replacement. Using the capacity, overall length, and spring center length you can find the right axle for your needs. I attached a page that has all of the trailer...
    view full answer...
  • Will 15 Inch Trailer Wheels Fit etrailer Idler Hub AKIHUB-655-6-EZ-K
    A 15 inch wheel may not fit idler hub # AKIHUB-655-6-EZ-K. It was designed for the larger pilot holes on 16 to 18-1/2 inch wheels. But both 15 and 16 inch wheels have a 4.25 inch diameter pilot hole so provided the wheels you have now have a pilot hole that is 4.25 inches or larger it will fit the hub.
    view full answer...
  • Can Dexter 6 Lug Hub/Drum be Replaced with Standard Hub
    Yes, there are hubs that can replace your Dexter hub/drums that you have currently. If the axle is rated for 6,000 or 5,200 lb you would want the hub part # AKIHUB-655-6-EZ-K or if it's rated for 3,500 lb you'd want the # AKIHUB-655-35-EZ-K.
    view full answer...
  • Replacement 6-on-5-1/2 Idler Hub Kit to Replace Hub 82655
    You can use 6-on-5-1/2 idler hub assembly # AKIHUB-655-6-EZ-K for your application. This hub kit includes bearings 25580 and 15123 along with races and a grease seal.
    view full answer...
  • Trailer Lights Do Not Work and Brakes Lock Up in Reverse
    If none of the lights on your boat trailer are working then it most likely the fuse on the tow vehicle. I know you said you have checked them but it is imperative to look in your owner's manual to be sure you have the correct locations for each circuit. Once you do find the correct circuits you will need to remove each fuse and inspect the element to make sure there is not a break. The break can be faint so be sure to pay special attention. If you are absolutely certain the fuses are good...
    view full answer...
  • Replacement Boat Trailer Hubs for #82655
    If you are looking for replacement hubs for your boat trailer, we offer lots of great solutions. The Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K is a great kit that includes everything you need to replace your 82655 hub. The bearings ( # 25580 for the inner bearing, # 15123 for the outer bearing), races, and grease seal included in this kit can also be purchased separately if needed. Check out the video linked below for details on assembly and installation.
    view full answer...
  • Replacement Trailer Hub Assembly That Uses Bearing Sizes 15123, and 25580
    The CE Smith Trailer Idler Hub Assembly # CE13611 will not fit your trailer with the hub bearings 15123 and 25580. Your hub bearings are most commonly found in 6,000lb axles and will require one of the following hubs. etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K for an EZ Lube axle etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-K for a standard spindle Both of these hub assembly's will include new inner and outer bearings and races, lug nuts, grease caps, and a 2.25"...
    view full answer...
  • How To Find Correct Hub/Drum Replacements for Four Winns Trailer
    In order to choose the correct replacement hub/drum for a trailer you'll need to know the axle capacity which is usually found on an tag in the center of the beam. Once this is obtained you'll also need to know the bolt pattern. The etrailer Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K for example is for 3,500 lbs axles and has a 5 on 4-1/2" bolt pattern. This is one of the most common hub/drum replacements.
    view full answer...
  • Replacement Hub for #42 Spindle on Homemade Trailer
    Although we do have hubs that will fit your #42 spindle, nobody makes one with a 5 on 4-1/2 or 4 on 4 bolt pattern. The only option would be to use something like the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K. This hub and drum assembly has a 6 on 5-1/2 bolt pattern and is designed for 5,200 lb and 6,000 lb axles. If you need brakes as well then you could use the # AKEBRK-6 along with the # BRKH12 mounting hardware. If you only need an idler hub the # AKIHUB-655-6-EZ-K...
    view full answer...
  • How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
    To determine what the correct replacement hubs are for your Magic Tilt trailer there is a little bit of information that we will need. We will need to find out inner diameter of both the Inner and Outer Bearings as well as the inner diameter of the Grease Seal. To ensure that your current wheels are compatible with the hub that you get you will need to make sure that you also have the appropriate bolt pattern on your hub. If you remove one of your current hubs you should be able to see...
    view full answer...
    Image 1 for
  • Replacement for 826555 Idler Hub on Boat Trailer
    It sounds like you have 6K axle, if that's the case we do offer a hub that should work for you. Part # AKIHUB-655-6-EZ-K is an idler hub assembly for a 6K axle with a 6 on 5-1/2 inch bolt pattern. The hub uses a 25580 inner and 15123 outer bearing along with a GS2250DL grease seal. To confirm that this is correct, please check the reference numbers on your inner and outer wheel bearings, or you can use a digital caliper like # PTW80157 to measure the surface of the spindle where the inner...
    view full answer...
  • Solution for 5,200 Lb Replacement Axle With 73" Hub Face Measurement
    I do have a solution, but we do not have a replacement axle that matches that capacity and hub face measurement. What I can offer instead is the universal Timbren Axle-Less Trailer Suspension # ASR5200S01. This system fits any trailer width so you don't have to worry about matching the length. It will also replace/upgrade your suspension using AEON rubber springs that work independently. Removing the axle beam will give you additional clearance as well. If you also need hubs you can...
    view full answer...
  • How To Find the Correct Axle Replacement for a Four Winns Tandem Axle Boat Trailer
    I would love to help but in order to find the correct replacement axle for your trailer or any trailer for that matter we would need you to measure the one you have now. The needed measurements are going to be from the face of each hub and then from the center of each spring seat. If the bad axle cannot be used as a reference you can simply take these measurements with the other axle on the trailer. I have then attached for you below a list of our trailer axles which you can sort by capacity...
    view full answer...
    Image 1 for
  • Do We Have Grease Used With Easy Grease Trailer Idler Hub AKIHUB-655-6-EZ-K
    We have the same grease used in the Easy Grease Trailer Idler Hub Assembly for 6K Axles # AKIHUB-655-6-EZ-K, just with a different color. The hub comes pre-greased with a lithium complex grease, and you can get exactly that - as well as the needed grease gun - with the following: - LubriMatic LMX Industrial Strength Grease # L11390 - LubriMatic Standard-Duty, Lever Action Grease Gun # L30200 The # L11390 is a red grease but is otherwise the same and will be exactly what is needed for...
    view full answer...
  • Will 16 Inch Tires Fit Timbren Axle-Less Suspension System # ASR35HDS05
    As long as there is a hub that fits the spindle and has the bolt pattern needed for the wheels then yes the Timbren Axle-less system # ASR35HDS05 will work with 7.50-16 tires. For example hub # AKIHUB-655-6-EZ-K will accept 16 inch tires as long as the wheel has a 6 on 5-1/2 bolt pattern. I have linked a help article on determining wheel bolt patterns for you.
    view full answer...
  • Recommended Hub for 15 Inch Wheel On 3,500 Lb Timbren Heavy-Duty Axle-Less Suspension
    The Trailer Hub and Drum Assembly part # AKHD-655-6-EZ-K (2) along with the Electric Trailer Brake Kit part # AKEBRK-7-SA or the Trailer Idler Hub Assembly part # AKIHUB-655-6-EZ-K (2) will work with the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 and it will allow you to use a 15" wheel with 6 on 5-1/2" bolt pattern.
    view full answer...
  • Replacement Spindles, Hubs and Brake Assemblies For Custom Trailer Using Shortened Mobile Home Axles
    Based on the image you sent of the spindle it looks like you will be best off replacing the spindles with the more common #42 Spindle # TRU37FR. The spindles are severely rusted and the grease seal would not hold seal properly allowing water to get in and damage any hubs you install. It would be best to install this on all the ends of your axles so you will have the common sizes when you need to replace parts as the mobile home axles do not use common parts since they are designed to be...
    view full answer...
    Image 1 for
  • Availability of 5,200 lb Axle With Idler Hubs
    Although we do not have a version of the # e75SR that comes with idler hubs, we do have the parts needed to put this together. All you need is the # e55GR along with the Easy Grease Trailer Idler Hub # AKIHUB-655-6-EZ-K. This is pre-greased so it is ready to go. The hubs have a slightly higher capacity at 6k but they use the same bearings and grease seal so it won't hurt anything. You will still be limited by the 5,200 lb capacity of the axle.
    view full answer...
  • Do Different Timbren Axle-Less Suspension Systems Have the Same Camber and Ride Height
    The caster and camber could be the same on the # TASR35HDS03 and # ASR2KHDS05. The system has a slight manufacture camber. However, it is up to you on how much camber you have based on the installation. This can be changed using the included shims. As far as the ride height is concerned, these do not have the same dimensions. This will result in a different height between the systems when installed. The # TASR35HDS03 will also stick out farther. Since there is no real advantage to using...
    view full answer...
  • Which Hubs Fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 with 2" Lift
    The hubs that fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 use inner bearing # 25580, outer bearing # 15123, and a grease seal with a 2-1/4" inner diameter. For regular hub use part # AKIHUB-655-6-EZ-K but if you are wanting to incorporate brakes then you want hub and drum part # AKHD-655-6-EZ-K with the brakes # AKEBRK-7-SA for electric or # AKFBBRK-7 for hydraulic. I have attached some installation videos that you can reference as well.
    view full answer...
  • Hubs to Use With Kodiak Disc Brake Kit K2R526DKG
    Since the Kodiak Disc Brake Kit part # K2R526DKG is a slip on disc brake kit you would need an idler hub like the part # AKIHUB-655-6-EZ-K which is a 6k hub and has the correct 6 on 5-1/2 inch bolt pattern. We don't have a Dexter hub in this configuration but the etrailer hub I mentioned would work really well and is also pre-greased with LMX red grease too for an easier and cleaner install.
    view full answer...
  • How to Find Bearing Numbers to Allow Selecting Replacement Hub for 1996 Four Winns Trailer
    We can help you with a spare trailer hub-and-drum assembly and/or spare bearings for your trailer. Thank you for your photo. Either way you will need to pull one of the hubs to get the part numbers from the inner and outer bearings. These part numbers will of course allow you to select the correct spare bearings but they will also help us find the correct spare hub/drum. A new hub/drum must use the same set of bearings as the one it replaces; this is how we can ensure the hub will fit...
    view full answer...
    Image 1 for Image 2 for
  • Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
    Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # AKHD-655-6-EZ-K if you have the spindles with the integrated grease zerk. If you have standard spindles, I recommend # AKHD-655-6-K which have the standard grease cap instead. These assemblies will fit perfectly with your axles based on the bearing and seal information you gave as well as 14.5 inch wheels. Then...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924