1. Trailer Leaf Spring Suspension
  2. Timbren
  3. Axle Replacement System
  4. Axles
  5. Universal Fit
  6. 2000 lbs
Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Tires - 2,000 lbs

Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Tires - 2,000 lbs

Item # ASR2KHDS03
lowest price pledge
Our Price: $832.13
Trailer Leaf Spring Suspension
This item qualifies for Free Shipping
Shipping Weight: 100 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Designed for off-road tires, the heavy-duty Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle. Suspension units with brake flanges replace your existing axle and operate independently. Fits any frame width. Lowest Prices for the best trailer leaf spring suspension from Timbren. Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Tires - 2,000 lbs part number ASR2KHDS03 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (40)
  • Q & A (71)
  • Photos
  • Why etrailer?

Timbren Trailer Leaf Spring Suspension - ASR2KHDS03

  • Axle Replacement System
  • Axles
  • Universal Fit
  • 2000 lbs
  • Spindles Only
  • Timbren

Designed for off-road tires, the heavy-duty Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle. Suspension units with brake flanges replace your existing axle and operate independently. Fits any frame width.


Features:

  • Suspension system provides a safe, smooth, quiet ride for your trailer
    • 2 Separate units replace your existing axle
    • Oversize components are ideal for off-road and heavy-duty applications
  • AEON progressive-rate main springs absorb road shock and support trailer's load
    • Deliver a smooth, stable ride, regardless of load size
    • Compress and become stiffer as load increases, boosting spring strength
  • Rebound springs act as return devices to minimize rattle and bottoming out
    • Create constant pressure on the arm, so the suspension is never completely relaxed
  • 2 Independent units can eliminate the need for a thru axle
    • Increase ground clearance
    • Lower deck height for easier loading and unloading
    • Reduce roll during cornering
    • Fit any trailer width
  • Built-in camber and toe-in help your trailer to track straight, reducing wear on the tires
  • 4" Lift, EZ Lube spindles accept either 3,500-lb brake assemblies or idler hubs
    • 4" Lift provides greater ground clearance and accommodates larger tires
    • EZ Lube feature makes it easy to grease bearings without removing the hub
    • Spindles can be removed from units for simple replacement if damaged
  • Brake flanges let you install 3,500-lb rated brakes
  • Heavy-duty steel construction with black powder coat finish resists wear and corrosion
  • Easy to install and align
    • Bolt or weld to your trailer's frame


Specs:

  • Fits: 1-axle and 2-axle trailers that use low-pressure, off-road tires
    • Not recommended for triple-axle applications
  • Weight capacity: 2,000 lbs
  • Brake flange bolt configuration: 4 bolt
  • Quantity: 2 suspension units without hubs
    • Works with Dexter 3,500-lb hub and drum assemblies (84546UC3-EZ)
  • Spindle/hub compatibility:
    • Bearings: L68149 inner, L44649 outer
    • Races: L68111 inner, L44610 outer
    • Seal: 10-19
  • 3-Year limited warranty


The heavy-duty Timbren Axle-Less system combines Timbren's standard 3,500-lb Axle-Less system components with 2,000-lb AEON rubber springs, giving you a suspension system that is perfect for your small, off-road trailer. It allows you to use parts that would typically only fit a larger trailer on your undersized trailer. Add brakes for improved control. Get greater ground clearance and increased durability by installing bigger tires and wheels. The reverse drop spindles deliver even greater ground clearance and give you the ability to use larger tires than you could with a standard straight spindle. This makes the heavy-duty Axle-Less suspension system ideal for off-road use.


Note: The Timbren Axle-Less suspension system may require additional support on your trailer. If your trailer does not have a crossmember above the spot where you want to install the Timbren system, you may need to reinforce the frame. You can accomplish this three ways. First, you can retrofit the trailer with a crossmember. Second, you can build out the trailer frame. Third, you can use standard, 2-inch steel tubing to connect the 2 Timbren suspensions together using the built-in square hole on each unit.


Ground Clearance

Ride on rubber with Timbren's Axle-Less trailer suspension system. This one-of-a-kind suspension consists of two separate units, each containing rugged steel arms and two strong, hollow rubber springs. Overall, the system safely and effectively absorbs road shock, minimizes trailer bounce and rattle - regardless of load size - and helps to protect your trailer's components and cargo. Built-in camber and toe-in keep your trailer tracking straight to minimize tire wear. Integrated hangers attach to your trailer's frame. And 2-inch holes make it easy to reinforce your trailer's frame by adding standard, 2-inch-square steel tubing (if needed).


The Axle-Less independent suspension system replaces your trailer's existing leaf spring suspension and can eliminate the need for an axle. The independent action of the suspension reduces roll when your trailer is cornering and allows you to maximize ground clearance and minimize deck height. Your trailer can have the same side-to-side clearance as your tow vehicle. And the low deck height makes it easy to load cargo from either the rear or the side.


Because you're riding on rubber, your trailer will ride smoothly and comfortably, whether you're navigating rocky terrain or highway asphalt.


Timbren Axle-Less Suspension Parts

Components

  1. The AEON progressive-rate main spring supports the weight of your trailer and cargo and easily absorbs road shock. It is constructed of heavy-duty, hollow rubber.
  2. The rebound spring minimizes trailer bounce, rattle and bottoming out. It keeps the suspension under constant tension and ensures that the main spring compresses and expands in a controlled fashion. And it delivers a smooth, stable ride - regardless of how much cargo is on the trailer.
  3. The trailing arm and integrated hanger attach the suspension to the side and bottom of the trailer frame.
  4. The control arm carries the spindle and the hub. It pivots on strong, long-lasting urethane bushings that never require lubrication.
  5. The EZ lube spindle is simple to grease. If damaged, it can be removed and replaced, saving you both time and money. The spindle also includes a 4-bolt brake flange for simple mounting of trailer brakes.
  6. The hub is not included with this model.
  7. The built-in square hole accepts standard 2-inch tubing. If there is no crossmember above the suspension, you can easily add support to your trailer's frame by inserting 2-inch steel tubing through the hole on each suspension unit and then bolting the tubing into place.

Timbren Axle-Less Suspension versus Leaf Springs

Leaf Spring Example

The Axle-Less suspension's progressive spring is a definitive upgrade over leaf springs. Although leaf springs deliver a stable ride when supporting a load, a trailer with leaf springs will bounce and rattle when it's empty or supporting a light or off-center load. On the other hand, your trailer can bottom out on bumpy roads if the load is too heavy. The AEON progressive-rate springs of the Axle-Less suspension always deliver the same reliable performance, no matter the load size. As more weight is added to the trailer, the springs compress and become stiffer, offering more support for heavy loads. And because they rebound more slowly than leaf springs, the AEON springs do a better job of absorbing road shock, thereby keeping your trailer from bouncing and rattling when you're carrying a light load. So with this versatile system you will enjoy a smooth ride whether you're towing an empty trailer or a hefty load.


Unlike leaf springs, Timbren's Axle-Less suspension units operate independently of one another. Each spring activates only when needed. This reduces roll and delivers top-notch performance, even when you're hauling off-center loads. When your trailer with leaf springs takes a turn, one side of the suspension compresses and takes on more weight, and the other side becomes looser and bounces. This causes rattle and can make the trailer lean to one side. But when your trailer with the Axle-Less suspension takes a turn, one side compresses and becomes more rigid to absorb the weight, and the other side expands to normal height to help steady the load and minimize bounce and rattle. The load stays better balanced, even if it is off-center.


Timbren Axle-Less Suspension versus Torsion Axles

Torsion Axle Example

Timbren's Axle-Less trailer suspension system is a great alternative to torsion axles. While both systems allow either side of the trailer's suspension to operate independently, only Axle-Less suspensions are actually separate units. Torsion axles still require a bar that spans the bottom of your trailer, whereas Timbren's system can eliminate the need for a thru axle - giving you the same amount of ground clearance from the front of your trailer to the rear. It also allows Axle-Less suspensions to fit any trailer width - unlike torsion axles, which have to be fitted to an exact frame width.


Axle-Less suspensions operate in a smoother, less stressful manner than torsion axles. Torsion axles use a twisting motion, where the bar inside the axle tube rolls against rubber cords or a rubber wall to create compression and resistance. The up-and-down motion of the main spring and the side-to-side motion of the rebound spring in Timbren's Axle-Less suspension work together to provide smooth, consistent compression - with no twisting - that results in a better ride and less stress on the suspension's components.


Installing the Timbren Axle-Less Suspension

Whether you are building a trailer or retrofitting your existing trailer with the Axle-Less system, you must make certain that the trailer's frame is both perfectly square and sturdy enough to support a heavy load without the aid of a thru axle.


Install Option 1

There are three ways to install the Axle-Less suspension. The easiest method, which is recommended if you are replacing axles on your trailer, is to install a piece of 2-inch-square tubing (sold separately - available at most weld shops) through the integrated hole in the Axle-Less suspension. Then all you need to do is bolt the suspension to the side of the trailer's frame with three bolts (not included).


Install Option 2

The second option for installation is to fabricate an inboard extension plate that attaches the trailer's frame to the Axle-Less suspension.


Install Option 3

The third method of installation is to bolt the Axle-Less suspension's hanger to the trailer's frame and to an existing crossmember that is in the area where you want to install the suspension.


With both the second and third options, you must use three bolts to attach the suspension to the side of the frame. And you also have to use two or three bolts to attach the suspension to the bottom of the frame extension, or crossmember. Both the second and third methods of installation will eliminate the need for a thru axle and provide the most clearance.


Measuring Diagram

Timbren's Axle-Less suspension units should be installed directly across from one another. Before mounting the units, measure back from the coupler and mark the frame to make sure that the two distance measurements (A and B) are within 1/8 inch of each other. Then you can drill holes through the frame and attach the hangers with Grade-5, half-inch bolts (not included).


Dimensions of the Timbren Axle-Less Suspension

The following diagrams show measurements that were taken with electric drum brakes installed on the Timbren Axle-less suspension system.


Dimensions 1

Dimensions 2

Dimensions 3

Dimensions 4



ASR2KHDS03 Heavy Duty Axleless Trailer Suspension System by Timbren - Without Hubs - Wide Tires - 2,000 lbs






Customer Reviews

Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Tires - 2,000 lbs - ASR2KHDS03

Average Customer Rating:  4.7 out of 5 stars   (40 Customer Reviews)

Designed for off-road tires, the heavy-duty Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle. Suspension units with brake flanges replace your existing axle and operate independently. Fits any frame width.

- ASR2KHDS03
by:

Used this on a camping trailer behind our Jeep. The suspension handled 1000 miles of washboard gravel roads and mild rocky offroading with ease. We don't drive gently and had the trailer airborne at one point. The brackets that we opted to fabricate for them were straightforward and simple to install. I especially like the ground clearance under the trailer that you gain due to the lack of a solid traditional axle. The ride quality overall was excellent, especially given where we took it. In hindsight we should have gotten the 4" travel version as it may have been able to soak up deep ruts at 40mph a bit better. Only mild complaint is that the powdercoating on the leading edges had already begun to flake off when we received the suspension. I hit it with a can of spray paint, but I would have hoped it would be more durable. Overall, I will definitely be purchasing this axle-less suspension again for my next trailer build.


Comments
Ashley, the 4 version doesnt actually give it more travel. Its the same was the standard or the system as far as suspension travel. What the 4 system does it lift the height of the trailer from the ground, depending on what youre doing with the trailer. For an off road trailer I personally would do the 4raise for added ground clearance, just gotta make sure the trailer doesnt get top heavy. The standard system is good for pretty much all uses and the system is for when you need a really low deck height for a lawn mower or go kart for example. I appreciate your review as I am going to be building a small off road campingbug-out trailer to tow behind my lifted FJ cruiser. I havent decided if I am going to go with the standard height or the 4 lift as I am going to be running the same off road tires toyo RT that I have on my FJ on the trailer and I want the trailer to sit around the same height. Did you add brakes to yours? Im planning on either running electric brakes or if available in am going to run surge brakes.
-- comment by: Michael - 01/15/2016


Comments
Michael, My trailer was so light even fully loaded that I didnt see the need for brakes and never missed having them.I stand corrected: We did get the 4 lift, but the non-HD instead of the HD because the specs said that it had a bit more travel. and we didnt need the weight capacity. That being said, Im still happy with how this suspension performs. My trailer is on 31s on a stock Cherokee.
-- comment by: Ashley - 01/18/2016



- ASR2KHDS03
by:

Excellent, helpful customer service sold me this product, and trust me when I say it's worth the price tag. Pulled the old axle and leaf spring off a 60's era Bantam and swapped out for this with a support bar in between. Bumped up tires to 315/75r16 BFG TA/KO's to match my rig and am amazed at how much better this trailer now pulls. Empty it wad bouncing all over the place with the old axle and leaf spring setup. Now I hardly even know it's there. Was very easy to install, took a couple hours but I am happy with how it turned out. A+++ product and customer service!


Comments
HI Matt,WHat size wheel did you use and which hub did you get to match?Appreciate the info
-- comment by: Conrad S - 04/01/2015


Comments
They are GREAT! I put them on a small offroad trailer that has followed me all over some really rough roads in remote Oregon, Washington, and Idaho. They have performed flawlessly, helped the trailer tow extremely well, and were the single best upgrade I did to that trailer. Very much looking forward to another summer of exploring! Massive upgrade to the stock axle leaf spring combo, and I have had the opportunity to show it off to alot of fellow overlanders. I cant speak high enough of them. I also purchased a set of airbags for my vehicle which unfortunately have not held up terribly well. I have had to field repair one once already, and neither holds air terribly well. Truth be told they seem very underdesigned for the job they perform. From my super secret high tech pocket internet window.
Matt N - 02/06/2016



- ASR2KHDS03
by:

I love these. 30k miles and still going. Almost 1k offroad and they're still holding up. Fully loaded my overlanding trailer weighs 2k lbs, empty 1360 lbs. They did settle a little, but I just raised my fenders a little.



- ASR2KHDS03
by:

I’m very pleased with the products I received and would like to thank Danielle H for taking the time to help me find the right suspension for my personal build. She was very knowledgeable and by far one of the best that I have spoke with throughout the many industries I have contacted to find what I needed. I would advise anyone to give her a call if you’re looking for a great product but most of all someone who will take the time and with an Awesome Personality to help you find what you need. Thanks Ms Danielle H for all your help.



- ASR2KHDS03
by:

Exellent product, I installed the Timbren axless suspension on my little guy rough rider teardrop trailer, got four inches of lift and no axle hanging down in the way. I can now run 33 inch tires with no problems. The customer reps Karen and Katie were the best service people I have worked with in a long time, very friendly and went above and beyond to help me, great company great people. Shipping was very fast . Thanks again, Mark



- ASR2KHDS03
by:

Havent had them on the road yet but install was pretty easy and they came out of the box more beefy than i was expecting ????



- ASR2KHDS03
by:

Timbren axle- less suspension is a great product, this is the second one I have installed on an offroad trailer. Easy to install, pulls great, no axle hop, very easy to service. E-trailer shipped very quickly, arrived in 2 days, would recommend the product and e-trailer to anyone.



- ASR2KHDS03
by:

Fast service, good informational updates, quality products (the axles look awesome!) reasonable pricing and in time delivery! Very satisfied with the service I recieved from etrailer! I would definately purchase again or refer them to others! Thank you



- ASR2KHDS03
by:

Timbren has fixed the weld issues that were reported in previous reviews. The parts fit together very well now. Still working on getting it installed but so far so good.



- ASR2KHDS03
by:



- ASR2KHDS05
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


I was looking for a low profile axle system for my motorcycle trailer. The primary requirement was to be able to load my motorcycle by myself which required a low-profile trailer. With the 4" drop provided by Timbren, this setup turned out great. I originally intended on using ramps but after I swapped the leaf spring axle out with the Timbren, I found I was able to ride my motorcycle on/off without the need for the ramps. Originally, I was going to go axle-less but I found when torquing down the assembly to my frame it started to compress the aluminum rail. To take the pressure off the frame I added the 2" bar from axle to axle. Pulls smooth and effortlessly. I've had several people comment on the trailer height with one wanting to buy the trailer from me. This person worked at the local Honda Dealership. He thought it was a great design and I would imagine he's seen a variety of trailers come through his lot. The other option I considered was a torsion axle but I was looking for the lowest profile I could get. Therefore, cost was not a key factor. I also like the soft ride the Timbren system provides. Not sure if the torsion design would have been as smooth over bumpy roads. Regardless, I'm pleased with how this project came out.


Comments
Its been a year since Ive installed the new axles on my trailer my comments above still hold true. Im very pleased with the ride quality of the system after a year. The trailer tracks true and has hauled many things other than my motorcycle. Even empty it doesnt hop around like the original stock straight axle did. No regrets on the purchase.
Pat A - 03/15/2018



- ASR2KHDS02
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


Great suspension system. I used these for a severe duty off-road trailer and I am truly amazed at how well the trailer handles extremely rough terrain.



- ASR2KHDS04
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


Great product so far after 1 year. Everthing is holding up and i have put it to good use on multiple occasions. The lift kit made my trailer off road capable and performed to my expectations.



- ASR2KHDS02
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


Great product. Well made! Can’t wait to get it on a trailer. Includes grease fittings too!



- ASR2KHDS02
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


Great looking parts, robust design, professional looking welds....Nothing missing... I contacted Timbren prior to my purchase and received a prompt, helpful reply... The supplied instructions are complete and straight forward, i'm confident should i have any issues, contacting them will get them resolved...



- ASR2KHDS04
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


I think their axle-less design is very clever. The build quality of the suspension part looks good. I have heartburn over the spindle build quality. The spindle is mounted to the suspension and then the trailer wheel mounts on the spindle. The spindles I received are warped from welding. The plate that bolts onto the suspension does not mount flat due to this warping. I called Timbren. The gentleman that helped me was very pleasant. I described the problems and he said he would check his inventory and call me back. He did call me back and said they are all like that. He said get out the grinder and fix what you can and just tighten the bolts super tight, maybe the gap will go away. Really? Wow. The other problems are a LOT of weld spatter where the bolts are supposed to fit and they made a bend in the plate too close to the bolt holes so two bolt heads hit the bend and dont fit flat against the part they are supposed to hold together. Yikes! I am taking the spindles to a machine shop to fix them but I would not have ordered this Timbren stuff had I been warned before hand. So, fair warning.


Comments
Your comments regarding the Axle-Less Suspension are greatly appreciated. To address the issues you have pointed out, we have carefully reviewed our assembly. While we did not come across any major issues, we did however discover a few areas where the quality could be improved, specifically in the areas you brought to our attention. The following improvements have been made to improve the manufacturing process: - Robotic welder gun re-programmed so that it stops from getting too close to the areas adjacent to the mounting holes of the outboard arm and control arm. This will minimize weld spatter. - The distortion of the flat plates is due to the high degree of heat generated during welding. We conducted experiments, changing the sequence of welding operations until we were successful in minimizing the distortion. We apologize if our customer service in addressing your concerns was insufficient at the time of your phone call. Timbren is an ISO 9001:2008 company with an excellent reputation for providing customers with quality products that are well-performing and easy to install.
-- comment by: Quality A - 09/26/2013


- ASR2KHDS05
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


Built a custom trailer to haul an ATV on some bad rural roads in Baja. I used the 2" drop axel-less suspension to allow for full size tires and wheels yet keep center of gravity low. Easy to install on exposed frame, but note that a required brace or 2" square steel bar may be needed and sourced on your own. The finish is not very durable and does not survive the normal bumps, wrench scrapes and scratches of installation; plan on some touch up once installed. Pay attention to the spindle clearance and wheel offset.



- ASR35HDS02
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


I live in California and I'm building a custom off-road camping trailer for overlanding/camping, mainly for the Sierra Nevada backroads, but possibly for longer trips in a variety of terrain. I had read about the axle-less suspension from Timbren and found that it's a popular choice for these types of trailers. In my searches, etrailer.com came up frequently. So I posted a few questions on their web site, and got a prompt response with tons of great information and a complete parts list for what I needed. Much appreciated! The order handling and shipping was very prompt, and all my parts were shipped in one shipment which I definitely appreciate since I don't get packages delivered to my door. I received all the packages today. Great customer support, prompt handling, and quality products. I gave 4/5 stars because the packaging could have been a little better. One of the boxes was a little banged up in the corners, but the content was unharmed as far as I can tell. I've also received follow-up emails to ensure that I received everything and that it was in good shape. Overall, I'd highly recommend the company, and I won't hesitate to buy from etrailer again! My trailer build will probably take a few months to complete with all the bells and whistles, but I'll be sure to post pictures from the process.



- ASR2KHDS02
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


I just received everything Boy, this is heavy duty! I’m very impressed.



- ASR2KHDS04
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


After a fair number of miles including a lot of off road driving, I have nothing but good things to say about Timbren suspension. I have had a few questions and concerns and the support from Timbren has also been stellar. I would suggest you use the 2" crossmember no matter how solid you think your trailer is as it seems to really help in making everything perform well.



- ASR2KHDS01
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


Ordering went well.. Rene made sure by calling the manufacturer. Didn't expect Xmas season to have the shipping without a hitch... The link to UPS was not working but eTrailer called and got thru to find out the delivery was there! Brown Santa and eTrailer--Happy Peace Out Day.



- ASR35HDS02
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


Massively overbuilt and highest quality !! Note that these are HD versions which have 6000lb spindles and use 6000lb bearings, seals and brakes.



- ASR35HDS01
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


Quick, online support, fast shipping, looks like I received exactly what I ordered.



- ASR2KHDS04
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


I purchased the Timbren suspension components to upgrade the suspension on my vintage trailer. A phone call to etrailer got all my questions answered and the help I needed to get the right Timbren set and the right hubs. Everything was received in short order in good shape, except there was a small glitch - one part of the system wasn't included in my shipment. A call to Bill at etrailer resolved that issue inside a day, and the missing pieces were shipped right away. Excellent service and support from start to finish - this is the way you want to do business!



- ASR2KHDS05
by:

Review from a similar HD Axle-Less in Trailer Leaf Spring Suspension


This suspension is fantastic! Until I found Timbren, I was using torsion suspension which were ok but was not meeting my needs. Timbren's axle-less suspension is perfect and my customers are loving their trailers!


35
50
Show More Reviews

Ask the Experts about this Timbren Trailer Leaf Spring Suspension

Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee David L
Written by:
David L
Employee Randy B
Installed by:
Randy B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Noah M
Updated by:
Noah M
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.