1. Trailer Leaf Spring Suspension
  2. Timbren
  3. Axle Replacement System
  4. Axles
  5. Universal Fit
  6. 400 lbs
Timbren Axle-Less Trailer Suspension System - Spindle Only - Regular Tires - 400 lbs - Galvanized

Timbren Axle-Less Trailer Suspension System - Spindle Only - Regular Tires - 400 lbs - Galvanized

Item # ASR400S02-G
lowest price pledge
Our Price: $517.31
Trailer Leaf Spring Suspension
This item qualifies for Free Shipping
Shipping Weight: 54 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Need help with installation?
Locate installers near me
This galvanized Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle on your boat trailer. Suspension units replace your existing axle and operate independently. Fits any frame width. Lowest Prices for the best trailer leaf spring suspension from Timbren. Timbren Axle-Less Trailer Suspension System - Spindle Only - Regular Tires - 400 lbs - Galvanized part number ASR400S02-G can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (190)
  • Q & A (9)
  • Why etrailer?

Timbren Trailer Leaf Spring Suspension - ASR400S02-G

  • Axle Replacement System
  • Axles
  • Universal Fit
  • 400 lbs
  • Spindles Only
  • Timbren

This galvanized Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle on your boat trailer. Suspension units replace your existing axle and operate independently. Fits any frame width.


Features:

  • Suspension system provides a safe, smooth, quiet ride for your trailer
    • 2 Separate units replace your existing axle
  • AEON progressive-rate main springs absorb road shock and support trailer's load
    • Deliver a smooth, stable ride, regardless of load size
    • Compress and become stiffer as load increases, boosting spring strength
  • Rebound springs act as return devices to minimize rattle and bottoming out
    • Create constant pressure on the arm, so the suspension is never completely relaxed
  • 2 Independent units can eliminate the need for a thru axle
    • Increase ground clearance
    • Lower deck height for easier loading and unloading
    • Reduce roll during cornering
    • Fit any trailer width
  • Galvanized steel construction helps to prevent corrosion and rust
  • Built-in camber and toe-in help your trailer to track straight, reducing wear on the tires
  • Straight, EZ Lube spindles accept trailer hubs (sold separately)
    • EZ Lube feature makes it easy to grease bearings without removing the hub
    • Spindles can be removed from units for simple replacement if damaged
  • Heavy-duty steel construction with black powder coat finish resists wear and corrosion
  • Easy to install and align
    • Bolt or weld to your trailer's frame


Specs:

  • Fits: 1-axle and 2-axle trailers that use regular tires
    • Not recommended for triple-axle applications
  • Weight capacity: 400 lbs
  • Quantity: 2 suspension units without hubs
    • Works with Dexter 1,000-lb hubs (8-258-50UC1-EZ)
  • Spindle/Hub compatibility:
    • Bearings: L44649 inner/outer
    • Races: L44610 inner/outer
    • Seal: 10-60
  • 3-Year limited warranty


Note: The Timbren Axle-Less suspension system may require additional support on your trailer. If your trailer does not have a crossmember above the spot where you want to install the Timbren system, you may need to reinforce the frame. You can accomplish this three ways. First, you can retrofit the trailer with a crossmember. Second, you can build out the trailer frame. Third, you can use standard, 2-inch steel tubing to connect the 2 Timbren suspensions together using the built-in square hole on each unit.


Ground Clearance

Ride on rubber with Timbren's Axle-Less trailer suspension system. This one-of-a-kind suspension consists of two separate units, each containing rugged steel arms and two strong, hollow rubber springs. Overall, the system safely and effectively absorbs road shock, minimizes trailer bounce and rattle - regardless of load size - and helps to protect your trailer's components and cargo. Built-in camber and toe-in keep your trailer tracking straight to minimize tire wear. Integrated hangers attach to your trailer's frame. And 2-inch holes make it easy to reinforce your trailer's frame by adding standard, 2-inch-square steel tubing (if needed).


The Axle-Less independent suspension system replaces your trailer's existing leaf spring suspension and can eliminate the need for an axle. The independent action of the suspension reduces roll when your trailer is cornering and allows you to maximize ground clearance and minimize deck height. Your trailer can have the same side-to-side clearance as your tow vehicle. And the low deck height makes it easy to load cargo from either the rear or the side.


Because you're riding on rubber, your trailer will ride smoothly and comfortably, whether you're navigating rocky terrain or highway asphalt.


Timbren Axle-Less Suspension Parts

Components

  1. The AEON progressive-rate main spring supports the weight of your trailer and cargo and easily absorbs road shock. It is constructed of heavy-duty, hollow rubber.
  2. The rebound spring minimizes trailer bounce, rattle and bottoming out. It keeps the suspension under constant tension and ensures that the main spring compresses and expands in a controlled fashion. And it delivers a smooth, stable ride - regardless of how much cargo is on the trailer.
  3. The trailing arm and integrated hanger attach the suspension to the side and bottom of the trailer frame.
  4. The control arm carries the spindle and the hub. It pivots on strong, long-lasting urethane bushings that never require lubrication.
  5. The EZ lube spindle is simple to grease. If damaged, it can be removed and replaced, saving you both time and money.
  6. The hub is not included with this model.
  7. The built-in square hole accepts standard 2-inch tubing. If there is no crossmember above the suspension, you can easily add support to your trailer's frame by inserting 2-inch steel tubing through the hole on each suspension unit and then bolting the tubing into place.

Timbren Axle-Less Suspension versus Leaf Springs

Leaf Spring Example

The Axle-Less suspension's progressive spring is a definitive upgrade over leaf springs. Although leaf springs deliver a stable ride when supporting a load, a trailer with leaf springs will bounce and rattle when it's empty or supporting a light or off-center load. On the other hand, your trailer can bottom out on bumpy roads if the load is too heavy. The AEON progressive-rate springs of the Axle-Less suspension always deliver the same reliable performance, no matter the load size. As more weight is added to the trailer, the springs compress and become stiffer, offering more support for heavy loads. And because they rebound more slowly than leaf springs, the AEON springs do a better job of absorbing road shock, thereby keeping your trailer from bouncing and rattling when you're carrying a light load. So with this versatile system you will enjoy a smooth ride whether you're towing an empty trailer or a hefty load.


Unlike leaf springs, Timbren's Axle-Less suspension units operate independently of one another. Each spring activates only when needed. This reduces roll and delivers top-notch performance, even when you're hauling off-center loads. When your trailer with leaf springs takes a turn, one side of the suspension compresses and takes on more weight, and the other side becomes looser and bounces. This causes rattle and can make the trailer lean to one side. But when your trailer with the Axle-Less suspension takes a turn, one side compresses and becomes more rigid to absorb the weight, and the other side expands to normal height to help steady the load and minimize bounce and rattle. The load stays better balanced, even if it is off-center.


Timbren Axle-Less Suspension versus Torsion Axles

Torsion Axle Example

Timbren's Axle-Less trailer suspension system is a great alternative to torsion axles. While both systems allow either side of the trailer's suspension to operate independently, only Axle-Less suspensions are actually separate units. Torsion axles still require a bar that spans the bottom of your trailer, whereas Timbren's system can eliminate the need for a thru axle - giving you the same amount of ground clearance from the front of your trailer to the rear. It also allows Axle-Less suspensions to fit any trailer width - unlike torsion axles, which have to be fitted to an exact frame width.


Axle-Less suspensions operate in a smoother, less stressful manner than torsion axles. Torsion axles use a twisting motion, where the bar inside the axle tube rolls against rubber cords or a rubber wall to create compression and resistance. The up-and-down motion of the main spring and the side-to-side motion of the rebound spring in Timbren's Axle-Less suspension work together to provide smooth, consistent compression - with no twisting - that results in a better ride and less stress on the suspension's components.


Installing the Timbren Axle-Less Suspension

Whether you are building a trailer or retrofitting your existing trailer with the Axle-Less system, you must make certain that the trailer's frame is both perfectly square and sturdy enough to support a heavy load without the aid of a thru axle.


Install Option 1

There are three ways to install the Axle-Less suspension. The easiest method, which is recommended if you are replacing axles on your trailer, is to install a piece of 2-inch-square tubing (sold separately - available at most weld shops) through the integrated hole in the Axle-Less suspension. Then all you need to do is bolt the suspension to the side of the trailer's frame with three bolts (not included).


Install Option 2

The second option for installation is to fabricate an inboard extension plate that attaches the trailer's frame to the Axle-Less suspension.


Install Option 3

The third method of installation is to bolt the Axle-Less suspension's hanger to the trailer's frame and to an existing crossmember that is in the area where you want to install the suspension.


With both the second and third options, you must use three bolts to attach the suspension to the side of the frame. And you also have to use two or three bolts to attach the suspension to the bottom of the frame extension, or crossmember. Both the second and third methods of installation will eliminate the need for a thru axle and provide the most clearance.


Measuring Diagram

Timbren's Axle-Less suspension units should be installed directly across from one another. Before mounting the units, measure back from the coupler and mark the frame to make sure that the two distance measurements (A and B) are within 1/8 inch of each other. Then you can drill holes through the frame and attach the hangers with Grade-5, half-inch bolts (not included).


Dimensions of the Timbren Axle-Less Suspension

Dimensions 1

Dimensions 2

Dimensions 3



Deflection


ASR400S02_G Axleless Trailer Suspension System by Timbren - Without Hubs - Regular Tires - 400 lbs - Galvanized






Customer Reviews

Timbren Axle-Less Trailer Suspension System - Spindle Only - Regular Tires - 400 lbs - Galvanized - ASR400S02-G

Average Customer Rating:  4.7 out of 5 stars   (190 Customer Reviews)

This galvanized Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle on your boat trailer. Suspension units replace your existing axle and operate independently. Fits any frame width.

- A20RS545
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


I used these axles in a different way than most would. I needed a trailer that was small, could handle tight switch-backs, carry 600 lbs and be light. I had this idea and as a retired design engineer I saw a great possibility in this axle. I have made four of these trailers now, one as a camp trailer, 2 for trail work for State Parks and one as a utility trailer.


Comments
Really cool work!
-- Etrailer Expert Sierra K - 07/07/2021


- ASR3500S06
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


The trailer rides great down the road and no more worries about saltwater and rusty leaf springs. Not a cheap option but I’m very happy with the setup. When installing, just be sure to measure accurately and have sharp drill bits. A drill press type of guide also helps ensure correct drilling angles. The first picture is of a mounting gusset a local welding shop made. One is needed for each side and necessary to provide needed mounting strength-at least on my trailer frame. Pics 2 and 3 show the mounted suspension on one side of the trailer. Pic 4 shows the suspension on one side of the trailer with the axle attached and a separately purchased disc brake assembly mounted on it. Finally, pic 5 shows a 2” box channel between both suspension assemblies. Independent suspensions would have been nice, but I wanted to ensure trailer rigidity was maintained. So, after one year, so far, so good. It’s all smooth sailing down the highway.



- TASR5200S03
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Very exicited about these axels, I have been eyeing these for over a year. (Excellent service from etrailer, they had my parts to me in 1 day from the time of placing the order.) These axles seem to be well made and fit nicely with the Dexter hub and drum assembly and the 12" electric brake kit. I installed this all on a M1101/M1102 trailer frame after removing the factory axel assembly. I have not ran these on the road or off as of yet but will give another review at that time. The fit and finish are great and the packaging was good, a little banged up from shipping (missing 1 washer)



- ASR3500S06
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


A must have suspension if you're building an off-road trailer!


Comments
Its been a year and this suspension is still doing great!
David R - 09/27/2021


- TASR5200S03
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


This is as close to a bulletproof suspension as they come. We use this suspension on all of our VORSHEER XOC trailers. They have performed flawlessly as an off-road suspension.



- ASR3500S05
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Trailer suspension and disk brake performance is outstanding big big difference over leaf spring and electric drum brakes. Installation required modifications to the frame to monut the timbren suspension



- ASR3500S05
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Timbren saved our RV road trip! The leafs on the axle on our 2018 Jayco TT came apart while driving in Maryland. We tried going to the manufacturer, but they were useless. Going to a RV mechanic meant being grounded for at least 2 months. Then we found Timbren. With the help of Timbren's excellent staff we purchased axle-less system through etrailer, who made sure we got as quick as possible. It came ahead of schedule, my husband installed the Timbren system and we were back on the road! The axle-less system is better than the original manufacturers. If you plan on taking your RV or TT farther than 100 miles GET THIS INSTALLED and get it through etrailer.



- A35RS545
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


I rebuilt a 4 x 8 trailer using the Timbren Axle-Less Trailer Leaf Spring Suspension and it works great. I would recommend it to others.


Comments
Working out just fine.
David J - 09/25/2020


- ASR3500S06
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Best suspension you can get for off-road trailers. We use this suspension on all of our VORSHEER XER trailers.



- A12WS545
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Purchased 2 sets of the Timbren 1200 Axle-less systems for upgrading the suspension on an older 30' ft glider trailer. Single axle with small (13") tires made towing tough due to porpoising, dragging on drive entrances do to poor flotation; also German made and metric, no repair parts. GVW 2000 lbs equated to bouncy ride. Dual sets now allow the trailer to ride over bumps and sharp inclines easily, smoothly, little bounce on country roads; porpoising is history. My glider now rides securely, safely, quietly. Install time 4 1/2 hours (includes head-scratching). Results are outstanding, units are totally solid. Recommend the square tube interconnect, easy and quick - trailer frame was on the light side, so a precautionary fix. Clean look underneath. Ordered 5 wheels w/tires, very nice. Helpful neighbor so impressed he ordered a HD single set for his new DIY snowmobile trailer. Customer satisfaction 100%, from phone order, online support, product information, immediate shipping, install instructions, followup... HIGHLY RECOMMENDED!


Comments
I have just a little more to add regarding my purchase: Two sets, of the Timbren Axle-less assemblies, 1200 lb, and 5 wheels. I placed the order via phone, and whoever was on-call that day provided great answers and recommendations regarding the units, wheels and tires. At 31 feet, the trailer originally exhibited amplified porpoising on any bumps or dips in the road. Also bouncing and occasional sideways tipping due to the single axle. It made a lot of noise on my mountain community washboards. I speculated that the Timbren units would solve most, if not all of these problems and they have. Installation on my older 31 ft European ie, metric and no longer manufactured glider trailer was a mere 4.5 hours from removal of the old single axle to setting the trailer back down on its new assemblies. Instructions are complete, precise, useful and helpful. Appreciated. Little to comment on as installation was all straight-forward. I would like to describe the maiden voyage to the airport and back, but there is nothing to tell, other than it towed beautifully proper alignment instructions, and all that I viewed from the rear view mirror looked like a magic carpet ride. It rides over washboards and pot holes like a marathon hurdler, the 4-wheel independent suspension is great. Packaging: the shipping boxes all arrived in good condition, but the cardboard component boxes inside them... not so much. Most were ripped and open due to heavy components lightly surrounded with brown packing paper, just token amounts. Parts: all was accounted for minus a pair of spindle axle washers for one set, easily replaced at the local farm and ranch supply. No squawk, just an fyi. I am very pleased with your product and support, and was happy to leave a 5-star review with photos. The upgraded suspension was also a topic this past weekend at the glider port by those who regularly trailer their ships to various soaring events, some as far as a thousand miles away. My compliments to eTrailers, hope you can use my info,
-- comment by: Kelly F - 11/28/2018



- A4WS440
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Pleased with ETRAILER, will order here again. Not as happy with the torsion axle setup. 2 inch square opening for tying both axles together with your own 2" square tubing are not shaped to match 2x2x1/8 tubing. Grinding and welding of tubing required to make it fit. Also found the overslung stub axle left the end of the pivot arm without much ground clearance though the unit was intended and spec'd for atv tire off road use. A pivot arm with mounting pads top and bottom would be better and allow the user to choose high or low clearance use. I found the units were perfectly suited to offroad use once I fabricated new mounting pads and welded them to the bottom of the arms.


Comments
After a year of off road use, I couldnt be happier. My trailer rides smooth loaded or unloaded. No of that bunny hopp with leaf springs or rigid mount axles. The small rebound control snubber works perfectly! I modified my components for high clearance but the concept is sound, they work well. Great job Timbren!
Doug F - 06/22/2017



- ASR1200S04
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


The order came in on time and the customer service at etrailer.com (Ashley) and Sean from Tmbren was outstanding. They both were very helpful in my choosing the right product for my needs. The axle less suspension's performance is absolutely superb. It vastly improves ride quality. I am using it on a teardrop camper that often goes on gravel roads and the raddling sound from the leaf axles was horrible. A couple of points to consider before you settle on the axle less suspension: keep in mind that you will lose some hight of the trailer. While you will gain clearance from the lack of the axle, the suspension will make the trailer sit lower than before.i had to lower my hitch by an inch to maintain the trailer leveled. Also it does appear to compress at higher rate than the leaf springs, which makes it softer but easier to reach it's limit. Overall this product is absolutely a must if you are looking to improve the safety and the quality of your towing.



- ASR1THDS01
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


After a great deal of research, I ultimately chose the Timbren long arm kit to replace the torsion axle under my teardrop trailer. My initial impression is that there is simply no comparison between the two. It now rides better, pulls better and handles better than I could have imagined. The Timbren axle system is incredibly well built and is much more confidence-inspiring. While the spring rate closely matches my trailer weight, the components are much more rugged and robust. The spindles, bearings and brakes are rated at double the capacity of my old axle which gives me great peace of mind. I pull my trailer, both on and off road, anywhere it will fit and the long travel and heavier components are a game-changer for my travels. Installation, while requiring a bit of forethought, was otherwise straightforward and methodical. Documentation available from etrailer and Timbren, is second to none. Instructions were clear and concise with drawings and detail taking the major guesswork out of the equation. Even though, due to the odd frame design of my trailer that required a bit of work to adapt, I ended up making some frame stiffeners, the adaptation was as simple as it could possibly be. I've ordered from etrailer in the past and they were 100% accurate on this order as well. I ordered the Timbren kit without backing plates and hubs due to the requirements of my trailer and etrailer suggested, explained availability and supplied all of the components I needed. They truly a stress-less bunch of folks with an extraordinary website. I'll no doubt turn to them again...



- ASR1200S02
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


It was a very straight forward install, it goes pretty smooth if you take your time, double check your layout, Make sure of your bolt sizes (length) before going to the store. If you plan the project, don’t rush, its not a race, it goes really good. I spent about 10 hours spread over two days by myself. I am just waiting for tires to arrive. All that said very happy with the product and etrailer. Will recommend for any axel/suspension replacement.



- ASR3500S06
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Came late. Not e-trailers fault. Covid-19 and China's fault. They bolted right up on my trailer frame. Really like the way they make my tear drip trailer handle. No sway, no bouncing all over like it use to. Will always put these under any trailer I build from now on. E-trailer keep up the great work.



- A35RD545
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


enclosed are pics of trailer and spindle units. I was very happy with the end result, lowering ez loader trailer 8 inches for hovercraft. the spindle units were well made, very strong but had some weld repairs as pictures show.i could not set the needed adjustments till I cleaned up the units with a stone and file. also please improve the packaging . these heavy units need something better than cardboard for shipping. they were dislodged from Styrofoam and partially poked holes thru cardboard. but fortunately no damage there. again im happy with the installation.thank you!!!



- A20RS545
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


These units install easily, are well made, and perform great! The trailer doesn't bounce around like you see a lot of trailers do while traveling down a bumpy road. I traveled some unpaved roads with no issues. I am certainly glad I went axleless. I installed with 15" tires. Problem is I didn't go big enough. I intended to install on an existing trailer that I had. Changed my mind and built a new trailer. The new trailer came in heavier than I had planned. 2k pound capacity is now too small. I have to watch what I load the trailer with so I don't over load the suspension. I intend on buying the 3500 pound units when I have the money.



- A20RS545
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


This suspension system did EXACTLY what I wanted. I replaced the leaf springs, axle/hubs on my small trailer. The new suspension improved the capacity, lowered the bed 4+inches, improved ground clearance and allowed me to rebalance the trailer all WITHOUT having to have any welding done. Everything needs to be measured very exactly and the alignment technique is fairly cumbersome and takes a bit of time. In the end, I have a quiet, steady, strong, low riding trailer. What more could you ask for



- ASR3500S06
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


We use Timbren's ASR3500S06 on all of our XER trailers. We couldn't be happier. It is a well built suspension.



- A12WS545
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Good product and easy to install on my new build of a off road trailer for my side by side. Thanks


Comments
This has been a great product and works great and was easy to install
John V - 04/14/2020


- TASR5200S03
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


We use Timbren's ASR5200S03 on all of our XOC and XOC-R trailers. These suspension are well built and have always performed well for us.



- ASR1THDS03
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Hello I just received my order today that I only placed on Wensday. That night at 7:30 pm. I received an email stating your order is ready for shipping! I received my order on Friday WOW FAST FREE SHIPPING. Great product fast shipping. I'm going to start building OVERLAND TRAILERS.


Comments
Fantastic O will ONLY use Timbren Axles on my Overland Campers
Robert - 03/07/2021

Comments
Fantastic O will ONLY use Timbren Axles on my Overland Campers
Robert - 03/07/2021


- A35RS545E
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Best money we ever spent! Easy to install and the towing of the trailer has changed drastically for the better in every way. Thanks etrailer for selling a tremendously great product.



- ASR1THDS02
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


Well this is the 6th time that you have left out a part of the suspension we order. Luckily you've fixed the situation and have told me you'd ship out replacements. But I shouldn't have to worry about getting partial shipments from you. Its an unneeded headache



- A12WS545
by:

Review from a similar Axle-Less Suspension in Trailer Leaf Spring Suspension


I am pleased with the Timbren Axle-Less Trailer Suspension System with Hubs - 5 on 4-1/2 - Off-Road Tires - 1,200 lbs. I had a project and it worked out just fine.


69
252
Show More Reviews

Ask the Experts about this Timbren Trailer Leaf Spring Suspension

  • How Much Does The Timbren Axle-Less Trailer Suspension System ASR400S02-G Weigh?
    The Timbren Axle-Less Trailer Suspension System - Spindle Only - Regular Tires - 400 lbs - Galvanized # ASR400S02-G you mentioned weigh in at 54lbs for both sides, or 26lbs each. I included a video of the Timbren Axle-Less Systems for you to take a look at.
    view full answer...
  • Which Wheels Work With The Timbren Axle-Less Suspension ASR400S02-G?
    I have another option for you, but the Timbren Axle-Less Trailer Suspension System - Spindle Only - Regular Tires - 400 lbs - Galvanized # ASR400S02-G you were looking at uses an idler hub like the Trailer Idler Hub Assembly # AKIHUB-440-2-G-2K which has a 4 on 4" bolt pattern or the # AKIHUB-545-2-G-EZ-2K which has the 5 on 4-1/2" bolt pattern and would not work with the Yakima Rack and Roll Wheels # 8880157 you were looking at. Instead you would need a wheel with a 4 on 4" or 5 on...
    view full answer...
  • Timbren Axle-Less Trailer Suspension System for Boat Trailer
    Depending on the weight of your boat, we do have one galvanized option with the Timbren Axle-Less Trailer Suspension System - Spindle Only - Regular Tires - 400 lbs - Galvanized # ASR400S02-G. The other Timbren Axle-Less Systems are able to be used on boats and the components are powder coated for protection and durability. The units can be disassembled to allow for refinishing, but arguably do not need to be galvanized for salt water use. I've linked the page to all of your options....
    view full answer...
  • Length from Bracket to Center of Spindle on Timbren Axle-Less Suspension ASR400S02-G
    I checked with Timbren and the 13-5/8 inch length measurement on the Timbren Axle-less suspension system # ASR400S02-G is correct. But the length of the bracket that attaches to the trailer frame is 7-1/2 inches so depending on how the fender brackets are oriented it might not be an issue.
    view full answer...
  • Recommended Timbren Axle-Less System for Trailer Used for Salt Water
    The 400 lb Timbren Axle-Less Trailer Suspension System # A4WS440 has a standard black powder coat finish that does a good job protecting against the elements, but salt water will definitely be pretty harsh to this set so instead I recommend going with the kit # ASR400S02-G instead which uses a galvanized finish instead of the black powder coat. A galvanized finish will definitely hold up better to salt water and to help extend the lifespan of this kit I also recommend to spray down your...
    view full answer...
  • Replacement Axle for Gheenoe Light Canoe Trailer
    We don't offer a beam axle that is that short but the Timbren # ASR400S02-G with a 400 lb capacity and integrated Aeon spring suspension might be a good choice. The galvanized suspension system helps resist corrosion and the EZ Lube spindles allow lubricating the hubs without removing the wheels and hubs. The Axleless system can bolt or weld to your trailer frame. The # 8-258-50UC1-EZ hubs would be a good choice. The hubs include the bearings, races, grease seal grease cap and lug nuts....
    view full answer...
  • Rust Resistant Wheels Tires and Suspension For Off-Roading With Trailer
    We do offer many options of galvanized and aluminum wheels that do not rust or corrode. The Timbren Axle-less suspension system part # ASR400S02-G does not come in a galvanized option but the Timbren systems are powder coated with black powder coat to resist wear and corrosion. This kit is also made for smaller tires, so it doesn't accommodate a larger tire like you need for off-roading. I recommend Timbren Axle-less 1,200 lb suspension for Off-Road Tires part # A12WS545. This Timbren...
    view full answer...
  • Availability of Replacement Axle for Small Trailer Carrying 200 lb Sailboat
    We do carry several off the shelf axles, but I'm afraid nothing we offer would be as short as you're needing. The lowest capacity beam axle we offer is # CE33201GA which has an 1800 lb capacity, but the hub face to hub face dimension is 57-1/2 inch and the distance between the center of the spring seats is 46-1/2 inches, which would probably be too long for your needs. You can measure the hub face to hub face and spring center to spring center dimension. I'll provide a diagram showing the...
    view full answer...
    Image 1 for
  • Recommended Timbren Axle-Less Suspension System for Saltwater Boat Trailer Axle on Aluminum Frame
    The Timbren Axle-Less Trailer Suspension System - Spindle Only - Regular Tires - 400 lbs - Galvanized # ASR400S02-G or the Timbren Axle-Less Trailer Suspension System - Galvanized - Spindle Only - Off-Road Tires - 1,200 lbs # TASR1200S01G are great options for an aluminum I beam trailer. You will need to use a square tube between the assemblies that isn't included so make sure that 2 inch square tube is also corrosion resistant. Because I don't know the capacity of your trailer, I...
    view full answer...

Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Kathleen M
Video Edited:
Kathleen M
Employee Randy B
Installed by:
Randy B
Employee Wilson B
Written by:
Wilson B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624