BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
(48 reviews)
Price: $1,109.88
BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
Item # BAK64ZR
Retail:$1,340.85
Our Price: $1,109.88
You Save: $230.97
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
- All Info
- Reviews (48)
- Q & A (0)
- Photos
- Why etrailer?
BAK Industries Tonneau Covers - BAK64ZR
- Roll-Up Tonneau
- Rack Compatible
- BAK Industries
- Hard Tonneau
- Matte Black
- Flush Profile - Inside Bed Rails
- Opens at Tailgate
- Aluminum and Vinyl
Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install.
Features:
- Roll-up, hard tonneau cover keeps the gear in your truck bed secure and dry
- Cover rolls up for full truck bed access - secures with straps and buckles
- Pull cable lets you easily open cover from either side of truck bed
- Cover latches shut whether tailgate is open or closed
- Tailgate lock keeps your gear secure
- True flush-mount cover with textured, matte black vinyl gives your truck a sleek look
- Hinged, 1/4" thick, rustproof aluminum slats keep cover tight and help prevent break in
- Weather seals keep out water without need for drain tubes
- Easy, bolt-on installation inside truck bed rails - no drilling required
- Made in the USA
Specs:
- Weight capacity: 400 lbs evenly distributed
- Limited 5-year warranty
Get the advantages of both a hard tonneau cover and a soft tonneau cover for your vehicle with the Revolver X4s. This hybrid tonneau likely has an identity crisis. It's built like a hard cover, but it looks and acts like a soft cover. With the Revolver X4s, you get the strength, durability, and security of a hard tonneau and the sleek look and convenience of a soft, roll-up tonneau - all while protecting your truck bed and cargo and helping to improve your fuel mileage.
The X4s has the features of the original Revolver X4 with upgrades including a matte black aluminum underbody, integrated safety slat caps, rear corner caps, and an integrated bulkhead seal.
Strong, Convenient Hybrid Design
The secret to the Revolver X4s's versatility is the aluminum slats on the underside of the cover that make it strong, seamless, and flexible. These individual, hinged slats give the cover its rugged body, while also allowing enough flexibility for the cover to be rolled up. Atop the slats is a tough, 1-piece vinyl layer that adds to the tonneau's sleek look and overall durability while also keeping the slats perfectly aligned. As a result, the Revolver X4s will roll up evenly every time, unlike ordinary soft vinyl covers that can get lopsided as you maneuver them.
Low-Profile Appearance
Unlike other tonneau covers that sit 1/2" or more above your truck bed rails, the Revolver X4s sits nearly flush with your rails for a clean, ultra-sleek look.
Full Truck Bed Access
The Revolver X4s gives you full use of your truck bed in a matter of seconds - just roll up the cover and secure it behind the cab. As a result, you can tote around all your gear without having to remove the tonneau. And because the Revolver X4s mounts inside your truck bed rails, you can still use your truck bed stake pockets to mount accessories like tie-down anchors.
Simple, One-Person Operation
The Revolver X4s is simple to operate. Following installation, just roll the cover out and press down on the rearmost slat at the tailgate to secure the tonneau in place. The built-in latches not only lock down the back end of the tonneau, but they also fasten the sides of the Revolver X4s along the length of the frame rails. The rail tooth runs the entire length of each frame rail. It rotates downward to lock the side rail into the sides of the cover.
When the cover is rolled out and the rear slat is pressed down at the tailgate, the latches on both sides engage. When this happens, the integrated teeth pivot down and rest on top of each slat of the rolled-out cover. Closing the rear slat effectively pins the cover to the rails, ensuring that the cover stays closed from front to back. It's that simple - no Velcro to seal or snaps to wrestle with. When your tailgate is closed and locked, no one will be able to get through the cover, thereby safeguarding your truck bed and its contents. The cover automatically secures as the locking levers at the tailgate engage. These sturdy levers have reinforced gussets that give them added strength and durability. And they will never need adjustment.
To roll up the cover, unlatch the rear slat by dropping the tailgate and pulling either of the 2 release cords located along the bottom corners of the slat's housing. Either cord will release both of the latches so that you can raise the rear slat. When the latches are disengaged, the teeth roll back into the frame rails, releasing the sides of the cover so that you can easily roll it up. Just fold the rear slat over and roll up the cover the rest of the way.
Then secure the tonneau behind the cab with built-in nylon straps and sturdy plastic buckles. These straps help to keep the bundled tonneau from contacting your cab while you drive. And 4 rubber bumpers act as cushioned barriers between the cover and your truck cab.
Heavy-Duty Construction
The Revolver X4s's rugged aluminum and vinyl construction makes it an ideal match for your truck, no matter what you do while at work or play. This cover is strong enough to hold up to 400 lbs of evenly distributed weight when it's rolled out. The 1/4" thick, aircraft-grade aluminum slats are covered with a matte black vinyl skin for superior resistance to impacts, UV rays, and weather. This skin is what gives the tonneau its soft, sleek look. While the Revolver X4s may look like a soft cover, its aluminum skeleton provides exceptional security because it cannot be cut through in the same way that a standard soft vinyl cover can be.
Felt strips on the underside of the tonneau help to keep the slats from scuffing the vinyl top as you roll up the cover. The soft felt also shields your hands when the cover has gotten hot or cold. And rubber strips overlay your truck's side rails, cab rail, and tailgate, creating a seal that helps to conceal any gaps and works to prevent water from seeping in.
Easy, No-Drill Installation
Installing the Revolver X4s is simple. All you need is a wrench, and you don't have to do any drilling. The tonneau's frame rails clamp to the inside of your truck bed side rails to create a base for the cover. The included bolts secure the front hinge rail to the frame rails at the cab.
Slotted brackets at the ends of the tonneau side rails allow the bolts to shift in case you need to adjust the cover to achieve a snug fit. These brackets ensure proper alignment of the tonneau frame on your truck bed side rails. This eliminates trial and error in installing your rails - you won't have to put them on and then take them off again to get the correct fit. Pre-installed shims and spacers also help to ensure that the Revolver X4s rails are installed squarely on your truck bed.
80213 BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2011 Ram 1500 6-1/2 Foot Bed
- 2012 - 2018 Ram 1500 6-1/2 Foot Bed - without RamBox
- 2019 - 2023 Ram 1500 Classic 6-1/2 Foot Bed - without RamBox
- 2010 - 2011 Ram 2500 6-1/2 Foot Bed
- 2012 - 2023 Ram 2500 6-1/2 Foot Bed - without RamBox
- 2010 - 2011 Ram 3500 6-1/2 Foot Bed
- 2012 - 2023 Ram 3500 6-1/2 Foot Bed - without RamBox
- 2009 - 2011 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed
- 2012 - 2014 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed - without RamBox
- 2010 - 2011 Dodge Ram Pickup 2500 and 3500 - 6-1/2 Foot Bed
- 2012 - 2014 Dodge Ram Pickup 2500 and 3500 - 6-1/2 Foot Bed - without RamBox
Customer Reviews
BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black - BAK64ZR
Average Customer Rating: 4.4 out of 5 stars (48 Customer Reviews)
Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install.by: Roy05/24/2022
Fit is a little tight at the latch end even after removing shims, but overall very nice and sturdy. There was some minor damage to the product when it arrived, but nothing that impacted its function or outward appearance. Much nicer than the Revolver (old name) that I had on my last truck.
by: Michael 11/07/2022
Excellent value in a roll cover. If you want the look and convenience of a vinyl Tonneau cover with the security of metal then this is for you.
by: Steven07/10/2022
2022 Ram 2500
This item was forwarded to BAK for fulfillment / shipping - Looks like I am going to wait a month or so for delivery - Probably not etrailer's fault but certainly frustrating -
by: Robert 08/24/2022
by: Roger09/20/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
Mostly a great cover. I've had this cover on my 2021 Ram 8' bed for 1 year. Install took about 45 minutes. There are 2 issues. After snow or rain and temperatures drop below freezing the cover's locking system along the rails freezes making it very difficult to open or close. You have to go the rails and pull the mechanism free. This year I will try WD 40 prior to the winter season to displace moisture.
2nd, issue two of the hinged supports in the cover separated after being rolled up during a several day trip. One about 3 months ago the second 2 weeks ago.The first one was mostly cosmetic. The second separation would not allow the cover to close without forcing it. I contacted BAK and they quickly opened a warranty claim. After sending them photos and a description of the problem they sent a replacement cover. The 5 year warranty is a pluse. Hopefully this is a one off issue. If I have the issue again I will ask for a different cover.
by: Brian P.06/13/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
The original cover was improperly sized from the factory (direct shipment from BAK due to backorder). etrailer, as usual, went above and beyond to get me the correct fitting cover. The new cover fits perfectly and looks great on my truck. Hopefully it will last, though I worry about the quality considering BAK did not notice they sent me a cover with the wrong dimensions originally. Giving 4 stars due to poor QA from the factory on the original shipment.
by: Steven01/17/2023
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
The tonneau cover fits as advertised no leaks it has been a great addition to my truck I really like the way I have my whole bed to use and still have the security of a hard cover without blocking my view out of the rearview mirror for hoking up my fifth wheel trailer.
by: Chad01/12/2023
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
Cover shipped fast but didn't have any hardware or the rails to mount to my vehicle when it arrived. The seal at the cab of the truck was already separated and looks bent because the cover won't lay flat at that area.
Comments
Thank you for letting us know! I am glad our customer service team is already working with you to get you taken care of.
Brooke M - 01/17/2023by: Patrick V.05/23/2018
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
I was able to install this cover, with help from a friend, on my 2015 Chevy Silverado 6.5' bed in about 45 minutes. Everything aligned perfectly, it closes smooth, seals well, kept out the rain from a torrential rainstorm the next day. The matte finish on the vinyl matches the plastic on my truck, and doesn't look cheap like most other covers. I love the low profile between the rails look, the truck looks like their isn't a cover on until you get above the bedrail. Totally happy with this product!
Comments
Ive had this tonneau cover for a year now, and I can say that Ive been 95 happy with it. I have just two complaints with it: 1- The rubber strips that cover the length of the bed rails have lifted at the cab side, and depending on how it rains, water just pours in where those strips have lifted. I do have the full bulkhead seal installed, its leaking past that point. 2- The rubber strips have also begun to bubble up randomly along the length of the cover, so I also get water dripping in from along the sides. I have to carry my items in plastic tubs with lids, because the water doesnt just drip down, it will occasionally run along the underside of the cover and drip down towards the middle. The structural aspect of the cover held up to snow without a problem, and I love that its a rigid cover, however, the water leak aspect []s it from a 5-star to a 4.5 star.
Patrick V - 05/27/2019by: Eric K09/30/2020
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
Excellent tonneau cover! Super easy to install, and open/close as needed. The only issue that keeps it from the fifth star is the plastic clips on the strap that hold the cover in the rolled up position are designed backwards in my opinion. Definitely a minor issue, but it could be easily remedied to work muck better. This cover works great with the Thule TracRac SR ladder rack.
by: John 09/08/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
One year review. This was mostly easy to install, but I did have some issues with the tailgate end of the rails and had to call support, but they walked me through it. My concerns were environmental protection and security. After a year and 22k miles, the cover still looks good with no fading. The pull cable to release the cover still works flawlessly, and I’m happy with the security. Water intrusion is minimal in rain, but the car wash is going to put water in the bed. For rain, more water gets in when opening the tailgate than while driving in the rain. No issues holding snow weight up to 4”. My only quibble is that the rail ends look unfinished, but ultimately this is more about function for me.
by: Tim 08/23/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
This is my second BAK cover. I had the flip before this one. I definitely prefer this roll up style as it is much easier to open/close and not nearly as heavy. It would be 5 stars except for the fact that I have to constantly re-adjust and pull the cover back towards the tail gate. It seems to slide forward a micro amount with each opening. So after a few weeks of opening and closing there is a small gap between the tailgate and cover so I have to move it back to seal the gap. Otherwise love this cover.
by: Ty08/13/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
Very happy with my Bak Revolver X4s. The fit and function are exactly what I was looking for to complement my 2021 Honda Ridgeline RTL-E. The only negative is that this tonneau cover requires an adaptive ‘rail’ to fit this truck, which slightly inhibits the full opening of the rear ‘trunk’ in the bed.
by: Timothy08/25/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
I’ve had this for a year now. The good: Very nice product, I recommend it. The rollaway ease is great - quick, easy, compact and reliable during near every day use. Effective watertight (not water proof) seal. Definitely recommend the rugged vinyl of the X4 over the X2.
The not so good: the ribs can get kinked and are hard to work back into position when they do. This was really only an issue during initial install, so just be cautious to avoid letting it bend the wrong way. The plastic end caps on the lock rail can pop off, so I recommend using adhesive to hold them firmly in place.
Overall it’s great. Definitely recommend.
by: Terry01/02/2021
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
This is the wrong cover for anyone with a long bed and a fifth wheel. The weight of the cover when rolled up for an extended time causes the cover to break. BAK was outstanding and replaced it with a Flip BAK cover at no cost.
by: Rob D.06/13/2020
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
The Revolver looks clean and is very secure. I get compliments on it all the time! Been installed for just over a year now and still looks great!
Customer service is top notch!!
I love the videos guys. They answer so many questions and help you decide. Thank you for taking the time to make all of them. Smartest thing ever!!!
by: /Jon12/02/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
As advertised, looks good, had a broken trim piece when I unrolled the cover. CS was excellant. Some of the instructions are missing or confusing. Overall extremely happy with the whole transaction.
by: Sandy08/11/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
I wanted the flexibility of a ladder rack and a secure rolling tonneau cover. More complicated cause I have a 50 GAL Transfer Flow tank in the bed. It took me a tremendous amount of time to figure it out. Even when I called etrailer, the agent gave me the wrong information. But, finally... easy to install, perfect, one person install. Exactly what I need. Fair price.
by: Derek C.06/10/2020
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
I have a 05 Dodge Ram 2500 short bed. This is the only cover that I could find that works with my track Rack. It is a great combination
by: Stan 01/27/2023
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
I have been very happy with this cover. It has been secure and keeps most water out when it rains. It is holding up very well.
by: Robert 12/05/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
I could not get this tonneau from my disrtibutor thankfuly you guys had one. it was for a customer but they are very happy with the cover!
by: Josh06/23/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
Overall good system. The one issue I have is the 2 plastic snap on pieces at the tail gate have both come off and are no where to be found. Without those pieces water get inside the bed when it pools up. I should have super glued them in vs relying on the snap in method.
Comments
I see that this cover comes with a five year limited warranty and in addition to that, we do carry part # PARTS-356A0015
Replacement Locking Block Kit for BAK Revolver Hard Truck Bed Tonneau Covers
$32.31 if that is a better option for you.
-- Replacement Locking Block Kit for BAK Revolver Hard Truck Bed Tonneau Covers
$32.31 if that is a better option for you.
Brooke M - 06/27/2022by: William 08/02/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
I am very happy with the purchase 1 year later. I have a 21 Honda Ridgeline and found the instalation easy. You need to install the included sidewalls to accommodate the ridgeline bed shape and they do create an extra seam, but its not an issue. I can still access the trunk. Works well.
by: Jeff M09/23/2018
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
Fantastic engineering, and great looking. Was straightforward to install following included instructions. Very happy with this product so far on my 2013 Silverado.
by: Kevin 08/15/2022
Review from a similar BAK Revolver X4 Tonneau Cover in Tonneau Covers
Easy to install and a great fit on the bed of the pick-up. As advertised, great looking and very functional tonneau for your truck!
25
48
Show More Reviews
See what our Experts say about this BAK Industries Tonneau Covers
- Will BAKBox 2 Collapsible Truck Bed Toolbox Fit a Revolver X4Since the only difference between a Bak Revolver X2 and an X4 is the finish (matte vs. gloss) the BAKBox 2 Collapsible Truck Bed Toolbox # BAK92201 that you referenced would fit an X4 cover as well.
view full answer... - Adarac Ladder Rack and BAK Revolver Roll-Up Tonneau Cover for 2019 Ram 1500 New Body StyleThe Adarac Pro Ladder Rack # A49FR will work great with a BAK Revolver hard tonneau cover since the rack and cover install on different points on the Ram. For your 2019 Ram 1500 with the 6-1/2' bed and no RamBox you can use the X2 # BAK39213 which has the classic gloss black finish or, my personal favorite, the X4s # BAK64ZR which has the newer matte black finish. There are only a handful of tonneau cover and ladder rack combos that work with each other and this is one of the more popular...
view full answer... - Tonneau Cover For 2021 Ram 2500 With 6-1/2 Foot Bed For Use With B&W Patriot 5th Wheel HitchA folding tonneau cover is likely to interfere with your B&W Patriot # BWRVK3270, but there is a tonneau that will work for your 2021 Ram 2500 with a 6'4" bed that will give you exactly what you need, which is the Revolver from BAKFlip. The correct fit for your truck is the following: - BAK Revolver X4s Hard Tonneau Cover # BAK64ZR The Revolver X4s # BAK64ZR is a hybrid cover which means it is a hard cover with aluminum slats, but also rolls up so you get the convenience of being able...
view full answer... - Is There a Tonneau Cover for a 2018 Ram 1500 Double Cab with TracRac Ladder RackI do have options for you but the Thule TracRac TracONE Truck Bed Ladder Rack part # TH27000XT mounts inside the bed so there is no possible way to use a tonneau cover. However, if you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43003XT-501 then you can use a roll-up tonneau cover as it mounts in the stake pockets, the BAK Revolver X4s Hard Tonneau Cover part # BAK64ZR is what I recommend. In other words, it comes down to which exact TracRac model you have. The SR is...
view full answer... - Ladder Rack, Tonneau Cover, Kayak Carrier, and Fishing Rod Carrier 2011 Ram 1500 6.5' BedYou'd want a sliding ladder rack like the Thule TracRac SR part # TH43003XT-501 which is a confirmed fit for your 2011 Ram 1500 6-1/2 foot bed. Since this installs through the top of the bed rails it will allow a tonneau cover like the BAK Revolver part # BAK64ZR to fit. It also allows you to move the uprights closer to match what you plan to carry better as well. Not all tonneaus can fit with this ladder rack but the Revolver does so it's your best option. Then for a channel mount kayak...
view full answer... - How to Lock B&W Gooseneck Ball and Companion 5th Wheel Hitches to 2019 Ram 3500B&W doesn't have a direct way to lock the hitch ball to the Custom Underbed Installation Kit # BWGNRK1320-5W or the Companion # BWRVK3400 (for a 6-1/2' bed) or # BWRVK3500 (for an 8' bed), however we do still have some options for you to add theft protect for these on your 2019 Ram 3500. The easiest thing to do is add a cable lock like part # e98891 to your setup. You can route this through the lift piece for the hitch ball when it's in the stored position as well as around either of the...
view full answer... - Will the TracRac SR # TH43003XT-501 Work with My 2011 Ram 1500 with the Revolver X4 Tonneau Cover?Yes, the TracRac SR # TH43003XT-501 will work with your BAK Revolver X4 Tonneau # BAK64ZR installed on your 2011 Ram 1500 (with 6-1/2 foot bed).. While the TracRac SR is an amazing ladder rack and will not require and modifications to use, there may be some slight rubbing on the uprights of the SR because of the slight inward angle from the bases. If you are looking for a ladder rack that will avoid potential rubbing with your X4 and work with your 2011 RAM, I recommend the Adarac Pro...
view full answer...
Do you have a question about this Tonneau Cover?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate tonneau cover information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Video Edited:
Chris R
Written by:
Matthew S
Edited by:
Daron K
Video by:
John S
Installed by:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.