bing tracking image
  1. Accessories and Parts
  2. Bulldog
  3. Camper Jacks
  4. Trailer Jack
  5. Hardware
  6. Bearings
Replacement Thrust Bearing Kit for Bulldog Trailer Jacks - 2,000-lb Capacity

Replacement Thrust Bearing Kit for Bulldog Trailer Jacks - 2,000-lb Capacity

Item # BD500251
Our Price: $13.86
You Save: 30%
Accessories and Parts
Orders above $50 qualify for Free Shipping
Shipping Weight: 0.11 lbs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replaces the bearing, nut, and washer for your Bulldog trailer jack with 2,000-lb static capacity. 1-833-496-1390 to order Bulldog accessories and parts part number BD500251 or order online at Free expert support on all Bulldog products. Great prices and Fastest Shipping for Replacement Thrust Bearing Kit for Bulldog Trailer Jacks - 2,000-lb Capacity. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (33)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Bulldog Accessories and Parts - BD500251

  • Camper Jacks
  • Trailer Jack
  • Hardware
  • Bearings
  • Bulldog

Replaces the bearing, nut, and washer for your Bulldog trailer jack with 2,000-lb static capacity.


  • Replaces the bearing, nut, and washer for your Bulldog trailer jack with 2,000-lb static capacity
  • Includes bearing and washers


  • All Bulldog trailer jacks with 2,000-lb static capacity

500251 Replacement Thrust Bearing Kit for Bulldog Trailer Jacks - 2,000-lb Capacity

Video of Replacement Thrust Bearing Kit for Bulldog Trailer Jacks - 2,000-lb Capacity

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Rebuilding Bulldog Round Jacks

Today we're going to be taking a look at the rebuild process for the Bulldog 2000 pound lift capacity round trailer jacks. What we're looking for is the side wind style. These are going to be the 150 Series jacks. Pretty simple process for rebuilding the jack. Depending on your needs, you'll need 3 different parts. We've got our replacement cap here.

This is part number BD015500. You may or may not need this if yours is undamaged, but it is important to keep dirt and debris from getting in the top of your jack. We've got our replacement handle and gear kit. Now, this is going to have just about everything that we're going to need to rebuild the jack. You can see we've got our bevel gears here. We've got the flanged bushings that fit on the outside tube of the jack.

Got the pressure bushing there, the pins and some washers. Also got our handle, so this is going to take care of the complete upper end of the jack. Now, once we get below this bottom gear there's a bushing that is inside of the jack. That's our friction reducer. It's a good idea once you get to that point, go ahead and switch out the bearing.

The gear kit with the handle, everything over here is going to be BD500256 and then then the bushing in addition BD500251. Let's get these kind of moved over to the side. We'll start taking this jack apart. With a flat blade screwdriver we'll just want to remove the cap if it still is on your jack. Inside here you'll see it's pretty greasy. We're going to go ahead and wipe out all of that that we can.

Now, we'll turn our jack to where you'll see that little half moon cutout that's in our gear. Our pin is going to be right in behind there. We can take a 5/32 punch. We're going to get that driven on through. Now, once we get it most of the way through we're going to have to angle our handle a little bit to give it enough room to come completely out. We'll lift up on our handle once that's through, it'll usually slide out and see, that's going to be a direct replacement of it. We've got 5 and 3/4 of an inch in total handle length here. That gives us good leverage. Once your handle comes out your gear is just going to drop down. Again, these gears are universal, so the bottom gear fits the side, side gear fits the bottom. We don't want to forget the pin for our handle. You can see the pin that goes in the handle. That's going to have the little grooves in it, whereas the pin for our base gear is going to be solid. It's not going to have any grooving in it. The base gear is just going to slide off. Then there's also a floating pin that goes through that middle section which is this screw. We can take that out. Right below it is that thicker black washer. This is going to act as a support washer for our gear inside. Then we can just tap out this square portion there. That's that flanged bushing that's going to fit right over in the square hole. That just gives our handle a much wider area to ride on so it's not riding on just the thin tube of the jack there. All right, now it's time to pull on the base, or we can just lift up on the outer tube. Inside we've got our bearing and our other support washer you see there. That's going to go right down on top of the screw and our bearing fits on there. It's going to offer us very very low friction operation. You'll see this screw just threads down into that base plate, so as we turn it, this expands running the jack down. Go the other way, it's going to bring our jack back up. This screw is very very hard to damage so if your jack isn't operating properly, it probably has to do with this bushing because you're creating friction or the gears not meshing together anymore. This is going to be exactly how you'd go through the process of rebuilding it. We have our new bearing in place and the support washer that comes with it. Now we can bring our jack outer tube down on the inner tube here. Want to align that elongated dimple with the groove. We can bring that all the way down and then our screw is going to come right back through the hole that's in the top of it. At this point we're going to put our washer back in place. This is that larger black support washer. We've got our base pin, it's going to slide through. Now, we want that to be about equal on both sides. You can see how it's about equal and how much is hanging out of each side of our screw. In your case you're going to grab your new pieces as you put this back together, but this is a brand new jack. We're just taking it apart so we can get a good look at it, so we're going to reuse our old stuff. From our gear we want to be sure that our pin sits in the enclosed slot, no the open slot. All right, that should sit down so that the top of the gear is almost dead flush with the top of the screw. Flanged bushing will go back in. It might offer a little resistance but nothing too crazy. Now, we'll take our other gear, and again these are universal. It doesn't matter which one you use for which spot. We want to place that in so that the gears line up and they're going to mesh together. Then our handle is going to come up through the bushing. It's going to come through the gear and right out the other side there. You'll see the hole in the handle, we want to rotate our gears so that that half moon opening lines up with the hole. Place the pin that has the little grooves in it right in between that bushing and the gear in that opening. Slide it in and then we need to tap it in far enough so it's not going to offer any interference. It should be just inset to the gear. Right back together. Now, we'll want to use a good quality grease. It doesn't have to be a high temp grease or anything like that and we're going to go in there and make sure we get this fully lubricated. We see we're right back to brand new there. We'll have great smooth operation that's going to make our trailer very easy to lift and lower with all of our new components in there and fresh grease. Now, the replacement cap. You'll see it's got a little bit of a notch there in the grooves. I like to line that up with the notch that's in the tube of the jack itself. That's just going to tap on pretty quick and easy. That's going to complete our rebuild of the Bulldog 150 Series jacks. As you can see with a few parts and a few tools you can really save yourself a lot of money, as opposed to buying a brand new jack.

Customer Satisfaction Score:

Customer Reviews

Replacement Thrust Bearing Kit for Bulldog Trailer Jacks - 2,000-lb Capacity - BD500251

Average Customer Rating:  4.7 out of 5 stars   (33 Customer Reviews)

Replaces the bearing, nut, and washer for your Bulldog trailer jack with 2,000-lb static capacity.


After calling Fulton customer service to find the parts for my Jack that was on my Trailrite trailer from 1990. They told me the jack was obsolete and no parts were available for the jack any longer. My boat mechanic told me to check out etrailer.
I found the videos helpful in matching up my existing parts with the current products. Found that a combination of Fulton bevel kit for the 800-1200 jack and the Bulldog 2000lb. Bearing kit was what I needed, I did have to use a combination of new and old washers to get the right spacing.


The bushing and washers were the correct parts for my Bull Dog trailer Jack. Unfortunately, there were other unforeseen issues that prohibited the jack from working properly. Etrailer customer service was helpful and I will be ordering a replacement trailer jack from them since my rebuild efforts didn’t go as planned.


All parts were correct and will work just fine on this trailer thanks


Made the old jack on my CornPro trailer lift like new again. I greased the screw and replaced the bearing and now it operates smoothly and with ease even under heavy loads.


I used this to repair a jack that I purchased about 20 years ago. The bearing had disintegrated and the screw was frozen with rust and crud. I ordered the repair kit and cleaned the jack up. I installed the new bearing and spacers. It works just like it did when I bought it. Should be good for another 20 years.


Decent replacement Jack parts. Was difficult to find elsewhere. Makes spinning the handle much easier than my seized one.


Watching people struggle with worn out tongue jacks, it's amazing to me they don't just replace the bearings. A simple procedure that restores the jack to factory-new operation very inexpensively.


It worked on my pre 1999 jack, left original lower washer on jack shaft and did not use the two spacers. works good.


These bearings were just right for a trailer jack. Good service and FAST delivery. Thank you!


Part was as described, delivered in less than a week. Great Service, will use them again. My local dealer told me part was a 'safety device' and manufacturer does not sell seperately. Told me I had to buy a whole new jack!


Bearing is a lot smaller than the original ,it did fit the screw jack and works up and down. I have know way of knowing how we’ll it’s going to hold up at this point until I use it awhile


Perfect fit, great install video, finished the rebuild of my trailer Jack in an hour. Thx!


Parts arrived as expected. Cleaned screw threads and replaced bearings on two Jacks. Jacks work like new.


Bearing kit for the 150 Series jack. fit good & delivered timely.


I received this kit in a very timely manner and it iwas what I needed Thanks Marv

It is still working great. Thanks Marv
Marvin S - 02/08/2015


Part I ordered fixed the problem and my jack works perfectly since the repair.

It has been working great, just what the doctor ordered
Eddie - 09/28/2020


Items arrived on time. The instructions were accurate and the fit was perfect.
Thank You


great transaction, fast shipping,would deal with again,AAA+++


Got what I ordered! Fast and easy. Priced Right.

Great, no problems, good quality, service and prices
Frank - 09/01/2020


Excellent product and price.

Its still holding up to use and abuse.
Mick - 03/29/2018


A very economical way to salvage an old jack. Easy to replace a very good purchase!


Parts are holding up well. The bearing fit perfectly. No mods were needed.


Bearing fit perfectly and now the old grinding jack works like new.


This bearing is holding up great after a year.


EXACTLY what I needed--------made the old jack just like new!!!

Show More Reviews

See what our Experts say about this Bulldog Accessories and Parts

Do you have a question about this Accessories and Part?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Randy B
Installed by:
Randy B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.