bing tracking image
  1. Accessories and Parts
  2. Bulldog Winch
  3. Electric Winch
  4. Mounting Hardware
  5. Wiring
  6. 24 Feet Long
Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 24' Long

Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 24' Long

Item # BDW20207
Retail:$508.39
Our Price: $377.99
You Save: $130.40
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 13 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
1-800-940-8924 to order Bulldog Winch accessories and parts part number BDW20207 or order online at etrailer.com. Free expert support on all Bulldog Winch products. Great prices and Fastest Shipping for Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 24' Long. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Bulldog Winch Accessories and Parts - BDW20207

  • Electric Winch
  • Mounting Hardware
  • Wiring
  • Bulldog Winch
  • 24 Feet Long
  • 2 Gauge Wire


  • Wiring kit provides power connection at rear of vehicle for winch or booster cables
  • Quick connect to terminal end
  • Double power/ground wire with loop ends on battery side
  • Includes dust cover for vehicle side
  • 24' Long
  • 2-Gauge wires

20207 Bulldog Winch Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 24' Long - Rear




California residents: click here


Video of Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 24' Long

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bulldog Winch Wiring Kit Installation - 2004 Ford F-250

On this 2004 Ford F-250 super duty, we're going to review and install the bulldog wiring kit, part number BDW20207. First of, all hand cover the parts that come with this part number. This is our main wire harness right here, which is constructive of two gauge material and its overall length, is going to be 24 foot long. We'll take a look at the ends. First of, for your typical assessor, which should be the winch that goes on here. This is going to be ride towards the back of a truck. Comes with a cap, to cover up when it's not being used.

Also there's a little lanyard, so don't lose it, you can attach it to somewhere on the vehicle. On the other end of our wires, these is ground one. It's got all seal that ends on it. Our negative wire, here, it's intended to be installed on the negative side of the battery. Here's our red one that goes to the positive side of the battery and the same style construction. For your accessory or plug into it, comes with it's own plug and some logs to get crypt on to two gauge wire as well. This also comes from some heavy zip ties, to help it secure it to the vehicle.

To start off our install, I'm going to take this end of our wire harness and I'll route down behind battery, down towards the frame. I'm going to go through this opening right through here. We should be close to the inaudible 00:01:20 liner when guided from there, once we get down to that point. Once we have it through our opening, we'll go ahead and pull all the slack through and make one ground connection to our battery. We'll go ahead and make a connection to the negative side of the battery. We'll go ahead and loosen up the nut here, and we'll go right ahead and remove it.

Right, what I'm taking a wire and add it to our negative side of our battery. Now of course this is going to be a bit of sloppy fit, so I'm going to use the number ten washer on my bolt, to help give it some grip on the cable when we reinstall the nut. Now, I like to leave my positives, terminal as one of the last things I connect up. Let's leave this alone for now, we'll go back underneath the truck and route our wire to the back. Now we'll run a wire back, we'll make sure we stay away from anything moving like suspension components or anything hot like the exhaust. We'll go ahead and run ours long the frame as best we can and out towards the bumper. Now we'll go ahead and show you how we routed our wires.

Basically, we tried to follow the top of the frame rail as this is possible. Around this body mount right here, where it will rest on the frame, go along through here. We used some zip ties that came with the kit, to help hold it in place. We've basically used the existing holes in the frame and went along the side of it. We got over by the axle a bit, we had to run over the top of the frame and then start running inside the frame and let the cross numbers hold the wire up for us. Now you know, so we have some extra wire. We place some simple loops in there, zip tie it together and by this time we we're out of large zip ties, so we went back to some small zip ties. Held everything up against the inside edge of the bumper. There we have a wire harness right here. Now our kit does not come with a bracket or anything to hold in place, so, you could leave it like this, where the cover will be fine or, you can advocate your own bracket for it. If you choose to mount up to a bracket, or something from this vehicle, it does have holes built in for that purpose as well. Now we'll install our cap, we're in between the two wires and back over itself this way. That way your cap always stays with it. If we're wiring around, we'll go ahead and move to the front of the truck and hook up a positive cable. We'll use this pre-existing stud right here. We'll go ahead and remove the nut, using a ten millimeter socket. With this time, instead of using the extra washer on here, we just used to use a smaller ring of familiar wires stacked on top and let that do the work for us. Then we'll clump it down when we re-install the nut. This goes to the back of the truck one more time and we'll go ahead and use the tester to verify if we have power going back. We use our tester on it, even labelled negative, so we'll put our ground clamp there and we'll check the other side. Now you have power going back to it and inaudible 00:05:03 ad on our own accessory. Now we've verified power's going through our cable. I think we're good to go. L-Fisher for part number BDW20207. The bulldog wiring kit, on this 2004 Ford F-250 super duty.

Customer Satisfaction Score:


Customer Reviews

Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 24' Long - BDW20207

Average Customer Rating:  4.9 out of 5 stars   (16 Customer Reviews)


by:

Only good way to power my trailer winch-far superior to a separate battery


Comments
Great-5-no problems since going on truck battery’s power
Jack - 08/29/2022


by:

Best service! And prices also. Never going back to amazon if I can buy it from etrailer.


Comments
GREAT! I plug this in daily and it charges my trailer way faster than the 7-way power plug. I had it installed by a local shop. THANKS!
Mark - 11/16/2021


by:

Just what I needed. Now I can charge the batteries on my trailer as I travel and don't have to rely on solar alone.
Good quality product and shipping.


Comments
Great
Charles - 08/04/2021


by:

Great product, worked perfectly. I installed a winch on my car hauler trailer with a tip up bed. The 24' wiring kit was the perfect length. I have a 4 door/ long bed truck and with the trailer bed tipped up the extra length was perfect to connect to the winch. The plug for the winch side was easily soldered onto my winch leads. Very happy with the product all around.




by:

After a temporary "fubar" with my order, it finally arrived. I couldn't be happier with the quality & design of this kit. VERY well built. And the installation video was perfect for a DIY'r like me. Thank U etrailer. U guys really came through!!!


Comments
AWESOME !!! Saved my butt 2x’s all ready. 2 days stuck in mud, digging, cudn’t reach winch w front mount. Pulled winch cradle off ft bumper. Moved to rear mounted Bulldog plug & receiver. Drug my big Dodge Ram up & out. Wud NEVER have worked wo that double Bulldog winch plug setup. THANK U!!!
Michael O - 07/15/2018


by:

Just what I needed and fast service!




by:

Hi quality product, better than I expected. Also reasonably priced. It will be a quality accessory added to the vehicle and be interchangeable to the next vehicle I purchase. Thanks etrailer for making my shopping easier. AND Talk about quick service and delivery all 5 Star for me. I purchased both front and rear hook ups for my winch or other things that will need power and they are both just what the doctor ordered.




by:

All products received in good condition and have performed as expected.




by:

pexcellent! Ran front to back 3500 hd crew cab without difficulty..,Powers wench on trailer great!




by:

Came in 2 days after I ordered it! Have this to complement my bulldog front connection. Heavy duty 2 gauge wire and connections are made well! Pleased so far.




by:

Product arrived on time as promised and I am very pleased with the quality of the materials used. I look forward to installing it this weekend. Thanks etrailer.




by:

Very well built and works great. I did notice the price dropped $71.00 between the time I ordered it to the time it was received. Hopefully I can get that credited back to me.




by:

Great product and even better service.




by:

Product should work great.




by:




by:



16
16

See what our Experts say about this Bulldog Winch Accessories and Parts



< Previous
123. . .5



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Matthew S
Test Fit:
Matthew S
Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Lisa S
Written by:
Lisa S
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924