bing tracking image
  1. Trailer Bearings Races Seals Caps
  2. etrailer
  3. Bearings
  4. Standard Bearings
  5. Bearing Kits
  6. 3500 lbs Axle
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

Item # BK2-100
Retail:$28.82
Our Price: $26.14
You Save: 9%
Trailer Bearings Races Seals Caps
Shipping Weight: 0.77 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle. Great Prices for the best trailer bearings races seals caps from etrailer. Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle part number BK2-100 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2217)
  • Q & A (0)
  • Photos

etrailer Trailer Bearings Races Seals Caps - BK2-100

  • Bearings
  • Standard Bearings
  • Bearing Kits
  • 3500 lbs Axle
  • Bearing L44649 and L68149
  • etrailer
  • Race L68111 and L44610

Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.


Features:

  • Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle
  • Includes:
    • 1 Outer bearing (L44649)
    • 1 Inner bearing (L68149)
    • 1 Inner cup (L68111)
    • 1 Outer cup (L44610)
    • 1 Grease seal (10-19)
    • 1 Cotter pin
    • 1 Tang washer for EZ-Lube spindles


Outer Bearing
Outer Race
Inner Bearing
Inner Race
Seal
Seal I.D.
Seal O.D.
L44649
L44610
L68149
L68111
10-19
1.719"
2.565"


BK2-100 Hub Bearing Kit for 3,500 lb Axles - Lippert, Dexter, and Al-Ko, #84 Spindle





Customer Satisfaction Score:


Customer Reviews

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle - BK2-100

Average Customer Rating:  4.8 out of 5 stars   (2217 Customer Reviews)

Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.

by:

Never had problems etrailier bearings and seals , had purchased several sets through the years no problems until last set after installation and several trips hubs were getting hot so decided to pull the wheels to see what was going on. The seal rubber came loose from the metal seal ring over 50% on 1 wheel and allowed water intrusion did not see anything I could detect on the other wheel but had water inside hub wasn’t going to take a chance replacing both. No trouble since. Did not call because I felt they would tell me haven’t had any other problems like must have damaged seals on installation



by:

Very happy with the BK2-100 bearing kits I ordered to do all 4 wheels of my recently purchased travel trailer that had one bad bearing.I figured I’d do them all for my piece of mind moving forward. Only suggestion would be to wrap the seals separately in the box instead of leaving them to move around with bearings and races.Probably wrap races separately too. Why take the risk of them getting damaged by putting them all together in one box without protecting them? Thanks,



by:

Bearing and seal kit are a great quality purchase, they fit perfectly and have been running trouble free for a year now. Will definitely use this kit again when it is time to replace the bearings in my utility trailer or boat trailer.
I recommend using the Buddy Bearing grease hub with this Bearing & Seal pack.

Arctic P.

6/14/2020

This product has proven I made the best choice to keep my utility trailer rolling trouble free.



by:

Very pleased with these items! Bearings, races, and seals as a kit is the way to go, no second-guessing part numbers. etrailer.com is now on my 'favorites' list.



by:

Worked just fine. The hubs I ordered already had races installed, so I didn't use the ones in the kit. Didn't rate 5 stars because I don't know what qualifies as 5 star bearings.



by:

I entered my vehicle (it pulled up my camper including the length, 2017 crossroads cruiser aire 25RL) and I ordered 2 bearing kit for my boat and 4 for my travel trailer. The boat was good because I had the bearing numbers for it but the trailer was wrong because I trusted the one from the etrailer site. When I called to exchange them, the guy said they don’t have that on their site and I would have to pay for extra shipping to return the wrong ones and more shipping to send me the right ones. So what should have been around $15 shipping I’m now paying $48. I doubt I’ll be doing business with them again. Still waiting on the correct ones to get here.

Etrailer Expert

Jenny N.

7/17/2023

When it comes to bearings you do want to make sure you are matching the bearing numbers both the inner and the outer bearing. I will have our Customer Service team review and contact you.



by:

I called and talked to a few people because I was not sure what I needed, and they were very helpful. Answered all my questions and steered me in the correct direction. I have ordered several times from etrailer and will continue ordering from them. etrailer makes it easy for the people that aren't sure what they need. I will be ordering again soon. Thanks for your help.



by:

I our hased as a spare for the road. I've had them go bad on a boat before, so just in case. Fast shipping and rep sent me a page of what I needed to order for my particular RV. Always have enjoyed our hasing the ETrailer, wether a part for my RV, trailer hit h or whatever.



by:

The seal was a little thin. Replacing bearing set on old trailer. Hopefully with proper grease these will last our lifetime.

Bobbie S.

6/22/2023

Still working great



by:

I ordered a bearing and race kit and one set of bearings was dented on the keeper I don’t think it will be a problem but still

Etrailer Expert

Jenny N.

8/1/2023

I will still have our Customer Service team reach out to you.



by:

always purchase bearings and seals here for my saltwater double axle trailer. the fit and ride well . good product



by:

I purchased a used Airstream Travel Trailer and had no idea how many miles it had been towed but the tires were well worn. I decided to replace the wheel bearings and tires. The wheel bearing kits contained everything I needed except the grease and all the parts fit well. The hardest part of the job was jacking the trailer up.



by:

Purchased travel trailer wheel bearings and seals
For 10k overhaul. Easier and cheaper to repack and replace vs. cleaning and repacking. Seals will be destroyed anyway while repacking



by:

I have a mid 90's tandem axle, Venture boat trailer. The bearing kit worked great!



by:

Perfect Fit, have pulled this trailer 2500 highway miles since install with no issues whatsoever. Would buy again, and would recommend to anyone.. Thanks



by:

Worked. Unfortunately I also bought other bearings, and only received a partial credit when I returned them.



by:

eTrailer customer service found the correct bearings kit for my hub. Kit arrived in secured packaging rather quickly.



by:

A good way to buy this kind of product. We drove all over a large city lately to find all the components for our boat trailer wheels. In buying from e-trailer we received all the components we needed for our trailer wheels without expending the time and money searching for the right parts. Ant the shipping was fast. I shall return for future needs.



by:

Kit only comes with one size rear seal. They did not fit my trailer shaft. tried to get etrailer to ship the proper seals, but was told they could not exchange just the seals. I would have to spend another $25 plus shipping to get the proper seals, It would also be way more expensive to return the kit and buy individual part. i'll keep the kits and go elsewhere for the seals



by:

My order arrived quickly and in excellent condition. I used the etrailer vehicle selector to ID the parts. They matched the code on the original bearings.



by:

Perfect fit for my 3500lb axels on my 18ft flatbed trailer.



by:

Product was perfect,... packaging could of been better... received a box which had been opened on the bottom of the box but luckily nothing fell out. They could use better taping methods,..hint,.hint....



by:

Exact replacement for my wheel hubs. Running great replace almost once a year for my piece of mind



by:

I've been buying bearings, seals and brakes for my utility and travel trailers from etrailer for years and every order has been perfect. Items always as described and delivered quickly.



by:

I searched endlessly for a replacement hub and bearings that accepted a bolt on rotor. Finally found it here and ordering the “guts” for the hub was incredibly simple since this kit contains everything needed. So excited to get the trailer ready and get the boat hooked up and headed towards the water!


25
2217
Show More Reviews

See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

  • Picking Out Bearing Kit for Trailer with 2,000 lb Axles
    Nearly all 2,000 lb axles have a spindle that is 1 inch in diameter where both bearings ride. If that's what you have then the bearing kit part # BK1-100 would be what you need as it fits that spindle.
    view full answer...
    Image 1 for
  • Replacement Bearings for Dexter Axle 1,400 lb Axle
    Axles with low weight capacities like your 1,400 lb axle typically have a BT8 spindle so you'll need this kit: - Bearing Kit for 1" BT8 Spindle # BK1-100 This kit comes with L44643 Inner/Outer Bearings and a 34823 Seal with 1.249 inner and 1.983" outer diameters. If you pull the hub off of your trailer you can verify these part numbers!
    view full answer...
    Image 1 for
  • How To Find Correct Bearing Kit for 1998 Jayco Eagle 260FS
    The 1998 Jayco Eagle 260FS weighs around 5,000 lbs so it is likely to have either 2,000-2,200 lb or 3,500 lb axles. If it uses 2,000-2,200 lb axles then you'll need the Bearing Kit part # BK1-100 but if it uses 3,500 lb axles then you'll need the Bearing Kit part # BK2-100. In order to confirm you can read the axle tag off the axle tube. That said, we don't have the ability to look up bearing info for any one particular trailer.
    view full answer...
  • Replacement Bearing Kit Recommendation for Viking Popup Trailer with Dexter EZ Lube Spindles
    Can you get me the diameter of the axle or the capacity if you can find it? Most likely it's a 2k axle and the kit part # BK1-100 would be the correct kit to use but I'd need to verify that for sure. The correct diameter axle for a 2k axle would be 1-3/4 inch.
    view full answer...
    Image 1 for
  • Replacement Bearing Kit For 3,500 lb Axle
    Sure thing; the replacement bearing kit for your 3,500 lb axle is the following: - Hub Bearing Kit # BK2-100
    view full answer...
  • Replacement Bearing Kit for 3,000 lb Axle on 2005 EZ Loader Trailer
    If your EZ Loader boat trailer is rated for 3,000 lbs then I imagine it has a 3,500 lb axle with a #84 spindle so for your application you need the Hub Bearing Kit # BK2-100. This uses inner bearing L68149, outer bearing L44649, and a grease seal with a 1.719" ID and 2.565" OD. If these match the parts on your trailer then this kit will work. Otherwise if you pull a hub and have different parts please let me know what you find and I can help you out! Attached is an installation video...
    view full answer...
  • How to Pick Out Replacement Grease Seal for Trailer
    To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need. I attached a link to a page that has all of the grease seals we carry. You will need to select your inner and outer diameter from the filters on the page and the correct seals will be listed.
    view full answer...
  • Bearing Kit Recommendation for Dexter 3,500 lb Axle
    The correct bearing kit you need for a Dexter 3,500 lb axle is the part # BK2-100 which comes with the bearings, races, and seal needed plus a tang washer and cotter pin.
    view full answer...
  • How to Pick Out Replacement Trailer Hub for Boat Trailer Spindle
    When picking out a trailer hub you will need to go with one that fits the trailer spindle exactly. A 1-1/16 would be to big for a spindle with a 1.00 inch diameter. However, since I don't know where you are measuring I should get ahead of myself. The only way to correct determine what hub will fit your spindle is to measure the spindle where the bearings and seal rides. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper...
    view full answer...
    Image 1 for
  • Should a Bent Trailer Spindle be Replaced or is it Safe to Reshape it
    Replacing the spindle is going to be the best bet. Since the old spindle was bent, there could be more damage to it than meets the eye. This damage could come to light or be made worse by heating and trying to reshape the spindle into working order. You run a higher risk of the same thing happening all over again. A new spindle will take care of that part of the problem. I have included a link to our spindle main page. There are some important measurements that need to be taken to find...
    view full answer...
  • Bearing Kit Recommendation for Trailer Hub Bearing Spindle Dimensions of 1-3/8 and 1-1/16 inch
    You have a number 84 spindle based on the dimensions you listed. That would mean that the correct bearing kit you need is # BK2-100.
    view full answer...
  • Cannot Fit Washer Between Castle Nut and Outer Wheel Bearing
    If you had to go without a washer, it wouldn't be the end of the world. The washer is intended to place even pressure against the outer bearing, but if you draw down the castle nut properly, you can get by without a washer, but I'd try to find a thinner washer at your hardware store that would allow you to have enough clearance so the cotter pin can be installed.
    view full answer...
  • Bearing Kit that Fits Lippert 3,500 lb Trailer Axle 402767
    Since the Lippert trailer axle 402767 is a 3,500 lb trailer axle the bearing kit part # BK2-100 is the correct fit for it.
    view full answer...
  • Does the Bearing Kit # BK2-100 Include Tang Washer
    Yes, the Bearing Kit # BK2-100 does come with the tang washer and everything you see in the picture I attached. I attached a review video that shows everything included as well.
    view full answer...
    Image 1 for
  • How to Pick Out Replacement Bearings for a Pop Up Camper Trailer
    The best way to find the correct replacement bearings is to get the numbers stamped onto the metal of the inner and outer bearings that are currently on the trailer. With those you will be able to find the correct replacement bearings, races, and seals. Another option is to measure the spindle of your trailer with a micrometer to get the diameter of it where the seal, inner, and outer bearings ride. See picture.I have included a link to a video on inspecting trailer bearings that should...
    view full answer...
    Image 1 for
  • What Bearings are Needed for 3,500 lb Tandem Axles?
    The bearing in the photo shows a Timken M12659, which does not match any of the bearings we offer. You would need to find out the number of the other bearing as well, and knowing those along with your axle capacity should lead you to the correct kit for your trailer. As for your brakes, it is possible for only one of the axles to have brakes on it, and on a tandem axle trailer the brakes are likely to be on the forward axle, which is the one you described as locking up. To find out which...
    view full answer...
    Image 1 for
  • Which Axle Bearing Kit Fits Lippert 3,500 lb Axle on 2011 Coachmen Catalina
    Since you have Lippert 3,500 lb axles on your 2011 Coachmen Catalina the correct bearing kit you'd need for it is the part # BK2-100 that you referenced. I attached an install video for this for you to check out as well.
    view full answer...
  • How to Determine Correct Bearings
    No, it is not. In order to find the correct wheel bearings, you can take apart your hub assembly and looking at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle to thethousandths of an inch where the bearings ride. You can use the photo I've attached to see exactly where you need to measure. I've also added a link to a help article...
    view full answer...
    Image 1 for
  • Inside Diameters of the Bearings in Kit BK2-100
    The outer bearing is part number L44649 and has a 1.063 inch inside diameter. The inner bearing is part number L68149 and has an inside diameter of 1.378 inches.
    view full answer...
  • Replacement Bearing Kit for Dexter Axle D 8128391
    I sent your axle info to Dexter and they informed me that you have a 3,500 lb trailer axle so for a bearing kit the part # BK2-100 would be the correct kit.
    view full answer...
  • How to Determine Correct Replacement Hub for Shorelandr Boat Trailer
    There is a way for you to find the correct replacement hub for your 1995 Shoreland'r boat trailer though when I attempted to get that information via the VIN you gave, it came up as invalid. Since you already know your bolt pattern of 5 on 4-1/2" there are only a couple of other things you need to know order to find the correct replacement hubs for your trailer: the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly...
    view full answer...
    Image 1 for
  • Bearing Kit Recommendation for 3,500 lb Dexter Axle
    Dexter 3,500 lb axles are very common. They might be the most common axle found on trailers actually. Because of that we know that they bearing kit you need is the # BK2-100 which includes the correct bearings and seal.
    view full answer...
  • What is the Correct Bearing Kit for a 1992 Fleetwood Prowler M-19E Trailer
    If the number on the outer bearing is not legible then you will want to take a digital caliper and measure the spindle where the bearing seats to the nearest thousandth of an inch. If this measurement is 1.063" then the Bearing Kit for #84 Spindles part # BK2-100 would be correct for you. If the part of the spindle where the outer bearing seats does not measure to be 1.063" then I would need to know what that measurement is in order to recommend the correct bearings for your 1992 Fleetwood...
    view full answer...
  • Solution for Greasing EZ Lube Spindle that Had Zerk Fitting Fall Off
    If it's missing the zerk fitting the easiest solution I could recommend for you would be to replace your grease caps with Bearing Buddies. Bearing Buddies replace the grease cap and provide an easy way to grease hubs. In order to pick out the correct bearing buddy you will need know the pilot hole of your hub with a dial caliper. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into place....
    view full answer...


< Previous
123. . .37



Do you have a question about this Trailer Bearings Races Seals Cap?


Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Adele M
Updated by:
Adele M
Employee Alexander C
Updated by:
Alexander C
Employee Noah M
Updated by:
Noah M
Employee Carrie H
Updated by:
Carrie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.