bing tracking image
  1. Accessories and Parts
  2. Redline
  3. Trailer Brakes
  4. Electric Drum Brakes
  5. Hydraulic Drum Brakes
  6. Hardware
Mounting Hardware for 10" Brake Assemblies

Mounting Hardware for 10" Brake Assemblies

Item # BRKH10B
Our Price: $15.60
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.29 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts. 1-800-940-8924 to order Redline accessories and parts part number BRKH10B or order online at etrailer.com. Free expert support on all Redline products. Great prices and Fastest Shipping for Mounting Hardware for 10" Brake Assemblies. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (355)
  • Q & A (0)
  • Videos (1)
  • Photos

Redline Accessories and Parts - BRKH10B

  • Trailer Brakes
  • Electric Drum Brakes
  • Hydraulic Drum Brakes
  • Hardware
  • Redline
  • 10 Inch

Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts.


Features:

  • Allows you to install 2 trailer brake assemblies
    • Fits 10" brake assemblies with pre-installed mounting bolts
    • Works with electric or hydraulic brakes
  • Includes:
    • 8 Nuts
    • 8 Lockwashers


6-17 Nut for Brake Mounting Bolt

5-8 Lockwasher for Brake Mounting Bolt





Video of Mounting Hardware for 10" Brake Assemblies

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Trailer Brakes BRKH10B Review

Today we're going to take a look at the mounting hardware for 10" brake assemblies. This hardware will allow you to install two trailer brake assemblies to the 4-bolt brake mounting flange on the trailer axle. This hardware is designed to fit the 10" brake assemblies that already have the mounting bolts installed on the assemblies. These will work with electric or hydraulic brakes. It includes everything shown here on the table. It includes eight of the 7/16 by 20 nuts, and they do have a head size of 11/16. Here's a socket that has 11/16.

You can see it fits perfectly. It comes also with the eight lock washers. So, this would be all used to install the assemblies to your axle. That should do it for the review on the mounting hardware for 10" brake assemblies.

Customer Satisfaction Score:


Customer Reviews

Mounting Hardware for 10" Brake Assemblies - BRKH10B

Average Customer Rating:  4.7 out of 5 stars   (355 Customer Reviews)

Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts.

by:

After some difficulty removing the nuts on the back of the brake mounting plate, I decided to just order new hardware and toss the old nuts and washers away. Replacement hardware arrived within two days, did not delay re-assy as weather rained. Just a note, I would recommend that e-trailer just include the hardware when you order replacement brake assemblies. 7/16 x 20 nuts are not that common.



by:

The bag of mounting hardware only had the nuts in it. No washers in the bag as the photo indicates. For 16 nuts and bolts, I felt that this was overpriced when I ordered it, but I bought it out of convenience and to save a trip to the hardware store. Showed up without the washers so I had to go to the hardware store anyhow to get the washers. So I ended up paying $14 for 16 nuts that I could have just bought at the hardware store for $1 when I bought the washers. I don't know if the bag I received was packed wrong (no washers) or if the photo on the website was misleading?

Etrailer Expert

Brooke M.

12/20/2023

Gosh, I am so sorry you ended up having to run to the store - you shouldnt have to do that! The picture is accurate - your bag was missing the washers. I have sent your information to our customer service team to have them contact you about the missing pieces and what we can do to make it right.



by:

Worked good, but I would personally prefer nyloc locking nuts.



by:

these arrived fine and as described - these don't appear to be zinc coated - I could not find anything in product description on rust resistance - suppose i will paint.

David

1/13/2024

Worked out fine. Ideally for me these would be stainless for a boat trailer but I ended up painting to protect and should be ok.



by:

Quality of product is good. The wrong size of lock washers were sent which is the reason for the 3 star review. Called customer service to let them know so shipping mistakes were not made in the future. With the old brakes removed, and the trailer on jack stands, I wasn’t going to wait 3 days for a new shipment, so I had to make a trip to the hardware store to complete the installation. Not going to raise a fuss over an $8 mistake.



by:

Appear to be quality metal; matched up to my Dexter axles and hubs, no issues.
Arrived a couple days after the break kits and hubs; caused a small delay but no issue for me since did not need the trailer currently.



by:

As advertised



by:

You'd think this should be standard to come with the brake assembly but it wasn't. I could have reused the existing but these are nice and clean and new.



by:

I couldn't find this item,in-stock, anywhere locally. I should've got it from etrailer.com fromthe start.



by:

Great, fast shipping. I am confused because somewhere I read that if you buy the Right and Left set of brakes, the mounting nuts are free. Someone posted they had to buy the nuts. So, I ordered them too. P.S. they didn't send any extra nuts.



by:

Great service. Quick shipment on brake assemblies and tires. Competitive pricing. Found myself a new supplier.



by:

Very nice, fast shipping!



by:

the packaging was poor at best. nuts and washers were loose in the box hardly any packaging in the box and because of how it was packaged the insulation on some of the wires was worn away and wires were exposed. I wont be buying from them again unless I absolutely have to.

Etrailer Expert

Jenny N.

8/13/2022

I understand your frustration with receiving the order in this manner. I will share this feedback with our shipping department and I will have our customer service team reach out to you.



by:

Hardwear kit not sure why it doesn't come with the backing plates? It did help with a nice new clean install.

Etrailer Expert

Mike L.

7/24/2019

In the product descriptions for the brake assemblies, we mention that the mounting hardware is sold separately.



by:

Well, you may not see the actual brake controller in these shots, but I wanted to display just how much etrailer product was used to restore this old trailer. Re-decked the trailer, new wheel bearings, added brakes on all 4 with this brake controller and battery powered emergency disconnect... new rust protection, primer and paint, new lights and wiring all the way around, new wiring harness/box, and new tire carrier. Nearly all product except the decking and paint was from etrailer. the customer support was fantastic, I highly recommend this company!



by:

Great option if your installing new brake assemblies, don't have to deal with old hardware.

Kgh1959

12/28/2020

These parts work just fine



by:

I installed the brakes on the front axle of my boat trailer that carries a 21' fiberglass deep hull off shore boat. They work good as long as you have the controls set to the proper amount of gain. Even with the 5000# weight of my boat if I have the gain too high and hit the brakes too hard they will lock up. This is my second set for the same trailer. I found that no matter what you do not immerse them in saltwater. When I am going into saltwater I remove the brakes and put regular trailer hubs on until I am no longer in the saltwater environment. It's a hassle but I have never felt safe with surge brakes.



by:

It was nice to receive a product that was everything it stated in the ad. Nicely done, I was able to complete putting on new brakes in an hour.



by:

Excellent quality nuts and washers. If doing brakes, there is no reason to reuse the old mounting hardware!

Darrell M.

9/24/2018

Everything is great! Just had our Band Boosters order new wheels and tires from etrailer!



by:

New brake assemblies came with hardware so I bought these for nothing because the telephone specialist said I need them.

Etrailer Expert

Jenny N.

1/21/2022

I will have our customer service team reach out to you.



by:

Ordered brake assemblies for all four wheels on a 3500 lb. 2-axle travel trailer with mounting hardware and heat shrinking wire connectors. Everything was very high quality and assembly took about 45 mins. per wheel. It also shipped in two days so I couldn't be happier about the transaction. Thanks.



by:

Fit well, no issues.



by:

I’ve been well pleased with the trailer hubs , drums, and electric break assembly and the price was very satisfactory. Made a noticeable difference in in the tow ability of my camper. I’ve recommended this product and etrailer to a number of friends. Will definitely be shopping with you when I need parts.



by:

Work just like they should.



by: 08/27/2022

Received this as loose parts in an envelope. One nut and a few lock washers fit. The count was off also. I contacted etrailer and after a few days received an email it would take a few more days to process a replacement. Go to your local hardware store you'll get what you need and save time, money and effort.


25
355
Show More Reviews

See what our Experts say about this Redline Accessories and Parts

  • Mounting Hardware Kit for 10" Trailer Brake Assembly
    For a 10" brake assembly you'll want the Mounting Hardware for 10" Brake Assemblies # BRKH10B.
    view full answer...
  • Torque Specs for Installing etrailer 10 x 2-1/4 Inch Electric Trailer Brakes
    The recommended torque spec for etrailer electric trailer brakes # AKEBRK-35-SA is 45 to 70 foot pounds. For compatible nuts and lock washers use # BRKH10B.
    view full answer...
  • Determining Correct Replacement Brakes for 1973 South Park 1700 Travel Trailer
    In order to find the correct electric brakes for your 1973 South Park 1700 you will need to identify what you currently have. Brakes typically correspond with axle capacity and need to match the brake flange bolt pattern as well as the size of the drum on your hub and drum assembly. More than likely you have at least a 3,500 lb axle/axles on your travel trailer so we will start there. For a 3,500 lb 10" x 2-1/4" brake assembly that fits a 4 bolt brake flange you can use the # AKEBRK-35-SA....
    view full answer...
  • Correct 3,500 lb Hub & Drum For Boat Trailer With Bearings L44649 & L68149
    Outstanding information, thanks so much, and what you have, based on those measurements are a spindle for a 3,500 lb axle, with outer bearing L44649 and inner bearing L68149. For that, what you need is the following hub and drum: - Trailer Hub and Drum Assembly # AKHD-545-35-G-K This is a galvanized hub for your boat trailer, has a 5 on 4-1/2" wheel bolt pattern, and will allow you to use 3,500 lb brakes. Your brake flange bolt holes are the standard size so you can use the Hydraulic...
    view full answer...
  • Does Self-Adjusting Brake Kit AKEBRK-35-SA Fit 15-Inch Wheels on 3500-lb Axle
    If your Carry-On trailer has tandem 3500-lb axles with 4-bolt brake mounting flanges then you can use two of the Self-Adjusting Brake Kit # AKEBRK-35-SA to put new brakes on each of the four 15-inch wheels. These brakes are 10 x 2-1/4-inches in size and they fit with wheels that are 13, 14 or 15-inches. The mounting bolts are included but for nuts and lock washers use kit # BRKH10B; you'll need one kit per axle.
    view full answer...
  • Correct Hubs-Drums and Brakes for Lippert 3,500 lb Spindle
    The Lubed 4" Drop Spindle with Brake Flange for 3,500-lb Axle # LC12338, uses standard 10" diameter hubs and brakes, for which we have the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA. For the brake mounting hardware (nuts and lock-washers) you can use part # BRKH10B. The most common hub-drum assembly for this application is part # AKHD-545-35-EZ-K, with a 5 on 4-1/2 wheel bolt pattern. However, depending on the wheels you plan on using,...
    view full answer...
  • Electric Brakes That Fit Dexter 8-247 Drum
    We do have electric brake assemblies that fit your 8-247 drum like the Dexter Trailer Hub and Drum # 8-247-50. Since your hub and drum is for 3,500 lb axles and measures 10" diameter x 2-1/4" wide, you simply need to have brakes that match, which are the Electric Trailer Brake Kit # AKEBRK-35-SA (Self-Adjusting) or # AKEBRK-35 (Manual Adjusting). For the manually adjusting brakes you need the Brake Adjustment Spoon # W80630, and for both assemblies you need Mounting Hardware # BRKH10B. I...
    view full answer...
  • Which Brake Assemblies for 7000-lbs GVWR Trailer with Tandem 3500-lbs Axles
    Because a 3500-lbs axle will only use 10" brake assemblies you would only be able to use corresponding 3500-lbs brakes on your trailer and not a 7000-lbs brake, which is typically 12". I recommend using the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA, which are a nice self adjusting brake set that will fit on your current axles. If you wanted to add them to both axles you could, but it's not completely unheard of that a trailer...
    view full answer...
  • Replacement Bearings And Self Adjusting Brakes For Dexter 8-250 Hubs
    From past experiences we have found that the Dexter 8-250 hubs are for a 3500lb axle, use inner bearing # L68149 and outer bearing # L44649, and use 10" x 2-1/4" braking assemblies. For bearings I recommend the Bearing Kit # BK2-100 which will include the bearings and races you need. You will need one of the # BK2-100 for each hub. For braking assemblies I recommend the Electric Trailer Brake Kit - Self-Adjusting - 10" # AKEBRK-35-SA which have the self-adjusting feature you mentioned....
    view full answer...
  • Karavan 2600 lb Single Axle Boat Trailer Electric Brakes
    To add electric brakes to your Karavan US-2200-74-ST boat trailer, where Karavan has specified L44649 as the outside bearing and L68149 as the inside bearing, you will need the following parts. You can use the etrailer # AKEBRK-35-SA Electric Brake Kit including left and right assemblies. Add nuts and lock washers with part # BRKH10B. These brakes are self-adjusting and rated for use with axle weights up to 3500 pounds. There are lesser priced assemblies that are not self-adjusting. For...
    view full answer...
  • Replacement Hub and Drum for a 2003 Starcraft Gemini Popup camper
    In order to determine the correct replacement bearings and hub you will need to pull the hubs completely off and either measure the spindles using a digital calipers like the # PTW80157. You can also remove the bearings from the hubs and check the numbers you find on the inner and outer bearing to determine which hubs would match the ones you're taking off. It's also good to know the capacity of the axle. The last thing you'll need to match is the bolt pattern on the hubs to your current...
    view full answer...
  • Is There an 18 Foot Hydraulic Brake Line Hose For 3,500 lb Hydraulic Drum Brakes
    Hi Darryl; thanks for reaching out and yes we do indeed carry an 18 foot hydraulic brake line hose for your actuator to go along with the 3,500 lb Hydraulic Trailer Brake Kit # AKUBRK-35. For that what you need is the Kodiak Hydraulic Brake Hose # bh-3mfs-18. You will also need the mounting hardware for the brakes, which is the Mounting Hardware for 10" Brake Assemblies # BRKH10B.
    view full answer...
  • What Size Nuts Are Needed With The Electric Trailer Brake Kit # AKEBRK-35-SA?
    The Mounting Hardware # BRKH10B for the Electric Trailer Brake Kit # AKEBRK-35-SA is 7/16"-20. This mounting hardware kit contains 8 nuts and washers for mounting both brake assemblies on one axle.
    view full answer...
  • Replacement Drum or Disc Brake Components for 3,500 lb Trailer Axle
    If you can verify that you have 3,500 lb trailer axles then yes the parts you mentioned would be correct for you. The brake assemblies # AKUBRK-35-D are correct, the hardware kit part # BRKH10B would attach them to your spindles, and then for a hub/drum you'd need the # 8-247-50UC3 and you'd be set. Do go to a disc brake setup you would also be needing to replace the actuator/coupler that you have now as it would require a higher PSI rating. The kit you'd want for just the brake components...
    view full answer...
  • 3,500 lb Axle Option & Electric Brakes For Teardrop Trailer
    There is not a standard 3,500 lb axle with those measurements so you will either need to have one custom fabricated or go with one of the 3,500 lb Timbren Axle-Less system options: - No Lift: Timbren Axle-Less Trailer Suspension # ASR3500S05 - 4" Lift: Timbren Axle-Less Trailer Suspension # ASR3500S06 The Timbren Axle-Less system is much better than a standard axle because it gives you an improved ride. The reason for that is the Timbrens aren't connected by an axle beam, so they work...
    view full answer...
  • Adding Hubs and Electric Brakes to Little Guy Trailer
    The first thing I recommend doing is making sure that the axle on your Little Guy trailer is equipped with mounting flanges for brakes. If not, these will needed to be welded in place by a qualified welder. Otherwise you will need to replace the axle with a properly rated unit that already has the brake flanges welded in place. I then recommend confirming that the etrailer.com Trailer Hub and Drum Assembly # AKHD-545-35-K you referenced is compatible with the spindles on your Little Guy...
    view full answer...
    Image 1 for
  • Hub and Drum and Electric Trailer Brakes for 3,500 lb Axles
    Thanks for that information, and from your specs you have 3,500 lb axles, and we do have the hub and drum you need, as well as the electric brakes that will fit. The only thing you didn't mention was your hub's wheel bolt pattern, which will be either 5 on 4-1/2" or 6 on 5-1/2". If you aren't sure what yours is I have added a link to a help article which tells you how you can determine it. Once you know that, you will need one of the following hub and drums (depending on your bolt pattern): -...
    view full answer...
  • Does Timbren Heavy Duty Axle-Less Suspension ASR2KHDS01 Use 3500lb Brakes and Drums?
    Yes. The Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 2,000 lbs # ASR2KHDS01 you were looking at use 3500lb 10" braking assemblies and 3500lb drum brakes so you will be able to reuse the hubs and brakes off of your 3500lb Dexter axle. If when you remove them you find they are worn and needing replacement you can use braking assemblies # AKEBRK-35-SA, hub and drum assembly # AKHD-545-35-EZ-K, and brake mounting hardware # BRKH10B. I included videos...
    view full answer...
  • Recommended Solution to Replace Torsion Axle on 3500-lbs Boat Trailer
    I may have a solution for you, but we do not offer torsion axles; however we can help you find something to replace your old axle. I recommend using a Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR3500S06, which are a great axle replacement solution that helps improve ground clearance and provides you with a suspension and axle all in one. If you're going to go without brakes you can use the Dexter Trailer Idler Hub Assembly for 3,500-lb...
    view full answer...
  • Which Hub, Drum and Brakes Do I Need for 3500-lbs Axle with L44649 Outer Bearing
    I may have a solution for you, but there is not an L44549 bearing; it's possible that you mean the # L44649, which is a fairly common bearing and can be found in many hubs that fit on 3500-lbs axles. For a 3,500 lb axle with outer bearing # L44649 and inner bearing # L68149 (1.378" inner diameter) you could use the Bearing Kit # BK2-100 or get a complete hub and drum assembly with the Trailer Hub and Drum Assembly # AKHD-545-35-K; this hub and drum has a 5 on 4-1/2" bolt pattern, which...
    view full answer...
  • Is the etrailer Electric Trailer Brake Kit Quality on Par With Other Brands
    The Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA and other etrailer branded brakes have the same quality that you would find with a more expensive brake assembly. Since they are etrailer branded, we are able to keep the cost down by comparison. These have been tested by QAI and meet the certification requirements of the CSA. They also use automotive-grade friction material which is SAE-N certified. These brakes are a great...
    view full answer...
  • Which Hubs/Drum Assembly and Brakes for Timbren Axle-Less Suspension 3500-lbs with 4 Lift
    I may have a solution for you, but there is not a 5 on 5" bolt pattern hub and drum that is going to be compatible with the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Tires - 2,000 lbs # ASR2KHDS03. In order to use your 5 on 5" wheels you would need to get an adapter, which can usually be found via an off-road or auto parts retailer. For a hub and drum assembly that will fit on your Timbren Axle-Less system you can use the Trailer Hub and Drum # AKHD-655-6-EZ-K,...
    view full answer...
  • What is Needed to Add Electric Drum Brakes to Triple Axle Trailer?
    Hydraulic drum brakes and electric drum brakes would not be the same thing. In order to add electric brakes you are going to need the correct assemblies based on drum size and axle capacity. Since you mentioned 10", if you have 3,500 lb axles the Electric Trailer Brake Kit # AKEBRK-35-SA would be a great option. These are 10" diameter x 2-1/4" wide self-adjusting brakes and would require mounting hardware # BRKH10B to assemble. Electric brakes also need a Breakaway Kit such as # 20400,...
    view full answer...
  • What is Needed to Add Electric Brakes to 2014 Cargo Trailer?
    There certainly are brakes you can add; if you let me know the type of hub you have (idler or drum) and what type of brakes you are looking to add, disc, drum or electric, I would be happy to try and help you find the right brake set up.
    view full answer...
    Image 1 for


< Previous
123. . .11



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.