bing tracking image
  1. Trailer Hitch Ball Mount
  2. B and W
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 3 Inch
  6. Rise - 3 Inch
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black

Item # BWTS10033B
lowest price pledge
Our Price: $199.00
You Save: $14.00
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 27 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 7,500 lbs with the 2" ball or 10,000 lbs with the 2-5/16" ball. Lowest Prices for the best trailer hitch ball mount from B and W. B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black part number BWTS10033B can be ordered online at or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (2607)
  • Q & A (0)
  • Photos
  • Why etrailer?

B and W Trailer Hitch Ball Mount - BWTS10033B

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 3 Inch
  • Rise - 3 Inch
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Two Balls
  • Class IV
  • 10000 lbs GTW
  • B and W
  • Steel Shank - Matte Black
  • Steel Ball

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 7,500 lbs with the 2" ball or 10,000 lbs with the 2-5/16" ball.


  • Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver
    • Ball provides connection point for trailer coupler
  • Stowable design lets you store ball and mounting platform underneath your vehicle
    • Remove pins holding ball mount platform in place on shank
    • Flip platform underneath the hitch
    • Reinsert pins and clips to secure ball mount platform for travel
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Slide ball mount up or down along shank and secure in place with included pins and clips
  • Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch
    • No additional locks required to prevent platform and balls from being removed
  • 2 Different-size hitch balls let you tow trailers with different coupler sizes
    • To switch ball, simply remove pin, rotate balls, and reinsert pin
  • Dual-process chrome plating on balls provides excellent rust resistance
  • Black powder coated shank is corrosion resistant
  • Stainless steel pins create sturdy, rust-resistant connections
  • Durable steel construction with high yield tubing offers superior strength
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight:
    • When used with 2" ball: 7,500 lbs
    • When used with 2-5/16" ball: 10,000 lbs
  • Distance from center of hitch pin hole to center of hitch ball:
    • Hitch pin hole closest to ball: 9-1/4"
    • Hitch pin hole farthest from ball: 10-3/8"
  • Distance from center of hitch pin hole to pin hole in mounting block:
    • Pin hole closest to mounting block: 3-3/4"
    • Pin hole farthest from mounting block: 4-7/8"
  • Maximum drop: 3"
  • Maximum rise: 3-1/2"
  • Incremental height adjustment: 1"
  • Minimum clearance: 11" from ground to lowest point on Tow & Stow hitch
  • Limited lifetime warranty


  • Requires a minimum of eleven inches of clearancebetween the ground and the lowest part of the hitch
  • Without adequate ground clearance, the hitch may hit theground or other objects such as steep driveways or curbs
  • Striking any obstacle may cause damage to the hitch that could affect its integrity

The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.

Easily Adjusts and Stows

B&W Tow & Stow Ball Mount Operation

To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.

Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.

When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.

Built-In Anti-Theft System

The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.

Single Dimensions

A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.

When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.

How to Measure Drop on Adjustable Ball Mount

TS10033B B and W Stow and Tow Dual Ball Mount - Model 6 - 2" Ball and 2-5/16" Ball - Black

California residents: click here

Customer Reviews

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black - BWTS10033B

Average Customer Rating:  4.9 out of 5 stars   (2607 Customer Reviews)

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 7,500 lbs with the 2" ball or 10,000 lbs with the 2-5/16" ball.


Best hitch available in my opinion I've towed with nearly all of them. This is the third B&W Stow & Go hitch I have owned. No slack or play transferring between truck & towed trailer. Rarely need to remove hitch from receiver in truck. Can flip it under bumper when I go thru auto wash between towing trailers (automatic wash rollers don't play well with ball hitches past bumpers). I Have learned that I must occasionally clean & lube the stainless steel pins or they will start to seize into carbon steel holes. That's the only improvement I might suggest (possibly Stainless sleeves in carbon holes). Other than that well built strong hitch.


Wish it didnt have so play in it, it allows the trailer hitch to bounce more than standard drawbar does

We recommend using an anti-rattle setup like the part # 63232
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
which tightens the ball mount shank to the hitch tube and really takes out the movement. It also doubles as a hitch lock as well.
-- Etrailer Expert Katrina B - 07/19/2022


This is a versatile hitch. It could fit the receiver better…seems to be quite a bit of “slop”. I also wish it as a bit longer between the pin hole and the head. I run a Rock Tamer rock deflector and can’t install a clamp to tighten up the hitch to the receiver. I have installed the available B&W rubber gasket. It makes the hitch move less but due to its thickness, makes for difficult install and removal.


Beautifully made, but heavy. I bought if for use hauling my tandem axle/Polaris UTV, and for occasional use hauling rental equipment which comes on different trailers and can require a 2 5/16" ball (... and because it is made in USA). But after hauling that Polaris yesterday with my new-to-me Tundra for 1st time I found out two things; my old 6000lb ball receiver levels the tandem trailer nicely; and that new Tundra isn't shy about the gas. I'm not sure I want to carry this hitch around unless I really need the flexibility it offers.
That said; if you're a contractor hauling different trailers every day of week, this is the hitch for you. If you only occasionally haul a different trailer or need the different drops/rises; you may do better with a dedicated, single ball carrier.
PS; these are available in Chrome plated as well; more expensive but they are sharp looking. I got this one only because the chrome version wouldn't ship for a month at time I ordered.


This thing is stout. Really like it. I bought locks because I’ve had my trailer messed with before at boat ramps. That being said the locks are a little snugger then the pins. One hole is tighter then the others. Probably too much powder coat. I recommend locks though. Hate to be stranded at a ramp because somebody decided they needed a pin more then you. But overall it’s well made and a really good design and idea


Hitch was exactly as described and arrived 1 day ahead of the estimated delivery date

Excellent piece of equipment Working just fine
D M - 04/01/2022


Purchased for 2011 Toyota Tundra crew max 4x4 all stock wheels and suspension. It’s the best match for my truck. I went with the 5” drop model initially, but after installing it I realized my error in never needing that big of a drop. When matched to my trailers I would never be lower than 2” and having that extra 3+” of shank length really creates the potential to snag it on a sloped drive or curb. Per BW guide, they suggest 11” clearance and I was at 9” and that was without any load on it. So just a word of advice to fellow Tundra owners, unless yours is lifted considerably.

So the 3” drop version, as well as the 5”, is manufactured beautifully. It looks great and it is a substantial piece of metal. Functional it is genius!

The pins for the ball mount have spring clip pins and that would be my only area I will likely change out to a locking system. Simply to avoid losing one of those clips.

I spoke with Sherry at e-trailer for my return and she was extremely helpful. As well, I talked with BW directly and they were equally as wonderful to speak to. I could not be happier with my purchase or the vendor or the manufacturer.


Best made out there,works great.Was a machinists for many years this hitch has great machine work what I expected after looking at the others.Good price


Fantastic price on an item I shopped around for. On top of being priced well, the customer support was very good. My order was upgraded to faster shipping for free and the communication was great.

I would buy again and would recommend to friends.


Awesome heavy duty made in the USA hitch. Arrived in perfect condition and arrived in two days with free shipping.


Exactly what I wanted very durable great value love my hitch e trailer took care of me


Very good hitch for both my F250 and My F450. It very nice that you can flip the ball to the underside of the bed to where you do not hit it with your leg while at the tailgate. So far I am very pleased after a year.


Very heavy duty. Easily adjusted. Made in the USA!!!


Exactly what I was expecting! Very solidly built. Easy to switch between ball size and adjust height.Thanks!


I really like the BW tow & stow drawbar. The two ball arrangement fits all 4 of my trailers.
Stowed away under the bumper I never bust a shin or trip over it.
Keep the pins greased Wirth some white lube and this thing works great.


We bought this one year ago. Granted we live in Minnesota, with salt put down in the winter, but it was NOT suppose to rust and it was to with stand all elements. I have pictures of all the pins rusted, ball hitch starting to rust and we have to take a hammer and punch to get pins out. We haul fish houses and trailers all year long. I was hoping with your product we would not have to go through this again.


Everything showed up packaged well and awesome looking hitches. Thanks!




Wish I could give it 6 stars. First off, the amount of time B&W spent making the packaging and the literature for this unit is astounding. Solid steel, very heavy duty with great looking welds. Adjustment is smooth and the pins slide in and out way better than I thought. Keep them greased and should be good for years


My second B&W stowaway that I have bought, have them on both of my business trucks, absolutely love them, I think they are the best money can buy, MADE IN USA! No more changing hitches, fully adjustable for different trailer heights, great product!

My hitch is working the as the day I got it perfect!, Best that money can buy!
Morgan - 06/01/2019


I used to carry 2 or three hitches in my truck to make sure I could pull multiple trailers. Now I carry just one. I leave it in all summer, and take it in and out during the winter to keep it out of the salt. I would buy another one if I had the need.


This is a great product... Very versatile and easy to maneuver into the position you want. Truly the last hitch you will ever need to purchase.

Only negative is I cannot seem to find the right type of grease for the the pins. I would like a recommendation for that?


Great prices, fast shipping, and excellent service.


I bought one of these for my F350 and liked it so much I bought one for my F150. I didn’t need as much drop for the F150 so I bought this one. Great product. No more swapping receivers for the correct drop or ball size for the trailer I am hooking up to. High quality, great finish. I also liked being able to recess it further with a choice of two holes to pin the receiver in.


Well made product. You can tell that they take pride in what the do. Can't wait to give it a test.

One year later and still going strong. Has been put to the test numerous times over the past year and no issues at all. I pull a trailer that weighs 2100 lbs. and is rated for 7000 lbs. and no issues at all. Still solid and tight. Although more expensive than the competition, as the saying goes you pay for what you get!
David - 05/05/2021

Show More Reviews

See what our Experts say about this B and W Trailer Hitch Ball Mount

  • Installation of B&W Tow and Stow in Rise Orientation
    Yes. The B&W Tow and Stow # BWTS10033B would be installed "upside down" in order to be used in a rise configuration for your trailer.
    view full answer...
  • Trailer Ball Height of B&W BWTS10033B Tow & Stow Ball Mount
    With the ball of the # BWTS10033B at it's highest position while the ball mount is in its downward or drop orientation, the base of the ball would be even with the top inside edge of the hitch receiver tube. The top of the ball would sit about 2-3/4 inches above that. With the ball in it's highest position with the ball mount in it's upward or rise position, the base of the ball would sit about 3-1/2 inches above the inside top of the receiver tube and the top of the ball would sit about...
    view full answer...
  • Will B&W Tow & Stow Ball Mount Interfere with MultiPro Tailgate on GMC Sierra
    I went out to our warehouse to take a couple measurements on the B&W Tow & Stow 2-Ball Mount # BWTS10033B that will let you determine if there will be any interference between the unit when it's in the stored position and the multi-function tailgate on your 2019 Sierra 1500. What I recommend doing is dropping the inner gate on your Sierra's tailgate, which looks to be the closest portion to the rear bumper when in this position. Then take a measurement from the center of the hitch pin...
    view full answer...
    Image 1 for
  • Can the B&W Tow & Stow 2-Ball Mount # BWTS10033B be Used in Rise Position
    Yes, the B&W Tow & Stow 2-Ball Mount # BWTS10033B can absolutely be flipped to the rise position, which will provide as much as a 3-1/2 inch rise. This is a really nice ball mount that is compatible with 2 inch hitch receivers and features a stowable design that allows you to store the ball and mounting platform underneath the vehicle when not in use. It includes both a 2 inch and 2-5/16 inch hitch ball. With the 2 inch hitch ball it has a weight capacity of 7,500 pounds and with the...
    view full answer...
  • What is the Weight Capacity of B&W Tow & Stow Ball Mount BWTS10033B
    The B&W Tow & Stow 2-Ball Mount # BWTS10033B has a two different sized hitch balls, with the 2" ball having a 7.500 lb capacity and the 2-5/16" ball having a 10,000 lb capacity so it should be hefty enough for your mobile restroom business. I've added links to a pair of video reviews on this ball mount for you to take a look at.
    view full answer...
  • Distance From Hitch Pin Hole to Hitch Ball for B&W Tow & Stow
    The B&W Tow & Stow 2-Ball Mount # BWTS10033B will give you two different distances from the center of the hitch pin hole to the center of the hitch ball because it has two different pin holes. The closer hitch pin hole is 9-1/4" to the center of the hitch ball and the furthest hitch pin hole is 10-3/8" to the center of the hitch ball. I've added links to a pair of review videos on this ball mount for you to take a look at.
    view full answer...
  • Is It Possible To Set B&W Tow and Stow To 0 Rise
    Yes, you can set the B&W Tow and Stow Ball Mount part # BWTS10033B to 0 rise if you align the adjustable portion of the ball mount with the shank in the drop position. There is not an offset in drop position it starts at 0 and the increments between holes are 1 inch. It is about a 1/2 inch offset when it's aligned with the shank in the rise position. I recommend putting the ball mount in the rise position and adjusting it 2 holes up to give you the 2 inch rise you need. The extra 1/2...
    view full answer...
  • What is the Height of the B&W Tow & Stow 2-Ball Mount item # BWTS10033B
    The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise item # BWTS10033B is 6 1/2". I have attached a picture with the dimensions drawn on it.
    view full answer...
    Image 1 for
  • How Can I Tell What Rise/Drop I Need for My B&W Tow & Stow?
    When determining what rise/drop to use on a B&W Tow & Stow, it is important that your trailer connection is as level as possible. The first thing you need to do is measure the height of your hitch receiver from level ground to the top inner tube of the receiver opening. The next step of the process is to measure from level ground to the bottom of the coupler or shank of the item you wish to tow. With this information, you can determine the rise/drop you need with this following formula:...
    view full answer...
    Image 1 for
  • B&W Tow and Stow Hitch Pin Depth for a TowTector
    I went out to the warehouse and took some measurements of the B&W Tow & Stow 2-Ball Mount item # BWTS10033B. The back hitch pin hole to the weld is 4" and the hitch pin hole closest to the weld is 2-7/8" back. How far back your 2013 Ford F-150's hitch pin hole is on the receiver compared to how close it is to your bumper will determine if you have enough room for your TowTector.
    view full answer...
    Image 1 for
  • How to Determine Proper Ball Mount Drop for Lifted Truck on 35 Inch Tires
    Given your description, you'll need a ball mount with a pretty considerable drop. The best way to determine what sort of drop ball mount you'll need is to determine the height difference between the inside top edge of the hitch receiver tube and the underside of the trailer's coupler when it's up on the jack and level. I'll link you to an article that shows how to do this. Ideally, you'll want to use a ball mount that places the trailer ball so it's an inch or two high because the rear...
    view full answer...
  • Availability Of Adjustable Two Ball Mount With 3" - 5" Drop
    I may have an option for you, but I will need to know which ball mount you currently have to see if there is a replacement shank available by itself. Another option is to go ahead and replace your current ball mount with the B&W Tow & Stow 2-Ball Mount # BWTS10037B which has up to 5" of drop, or the # BWTS10033B which has up to 3-1/2" drop. Both of these options include a 2" hitch ball with a 7500lb towing capacity, and 2-5/16" hitch ball with a 10000lb towing capacity. I included videos...
    view full answer...
  • Anti Rattle Device Recommendation for Use with B&W Tow & Stow 2-Ball Mount
    The rubber silencer part # BWTS35020 that you mentioned does not come with the B&W Tow & Stow 2-Ball Mount # BWTS10033B and it does do a great job reducing the noise. Some people actually will use two of these to really take out the rattle. I still prefer an anti-rattle setup like the part # 63232 which tightens the ball mount shank to the hitch tube and really takes out the movement. It also doubles as a hitch lock as well.
    view full answer...
  • How to Determine Correct Rise or Drop for B&W Tow & Stow 2-Ball Mount
    Determining how to get the correct rise or drop is actually pretty simple and only requires two measurements. If you get the largest rise and drop you could wind up with more ball mount than necessary. In order to choose the correct ball mount, there are a couple measurements you'll need to take. First, make sure both your vehicle and trailer are parked on level ground; you'll then want to measure from the ground to the top of the inside of your hitch receiver. Next, measure from the...
    view full answer...
  • 2019 Subaru Forester Trailer Hitch and Wiring Recommendation
    To tow with your 2019 Subaru Forester, I recommend starting with the Draw-Tite Max-Frame Trailer Hitch Receiver # 76271. This hitch has a 2 inch receiver to make it compatible with most accessories so it can be used for things other than towing when desired. The hitch is rated for up to 525 lbs tongue weight and has a really nice black powder coat finish. It is a custom fit, so it will bolt in place. For your trailer wiring connection, I recommend the Tekonsha T-One Vehicle Wiring...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Adjustable Ball Mount for 2004 Chevy Silverado
    The B&W Tow & Stow 2-Ball Mount # BWTS10033B referenced in your question is designed for 2 inch trailer hitch receivers. As long as you have a 2 inch receiver installed on your truck, this will work great for your 2004 Chevy Silverado. This is a really great ball mount that features a stowable design that will allow you to store both the ball and mounting platform underneath the truck when not in use. It includes a 2 inch and 2-5/16 inch hitch ball. The adjustable height will provide...
    view full answer...
  • Does the B&W Tow & Stow 2-Ball Mount Include Hitch PIn
    The B&W Tow & Stow 2-Ball Mount # BWTS10033B referenced in your question does not include a hitch pin. I recommend adding a locking hitch pin like the Blue Ox Trailer Hitch Receiver Lock # BX8858. This chrome receiver lock will work great to secure the ball mount to your hitch receiver while also helping to deter theft. The tube-style key lock resists picking and the weather-resistant plastic dust cap will keep the cylinder free from water and debris. 2 keyed-alike keys are included....
    view full answer...
  • Do Bumper Sensors of 2019 Volvo XC90 Require Recalibration After Installing Trailer Hitch Receiver?
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76194 is a straight forward install as you stated. It does not require any recalibration of the sensors when you reinstall the bumper unless they are damaged when removing and reinstalling the bumper which would only be an issue if you physically damaged the bumper or sensors. If you will be using this hitch for towing, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118683...
    view full answer...
  • B and W Stow and Go Ball Mount Recommendation for Use with Rock Tamers Mudflaps
    I have a solution for you, but in the stowed position the # BWTS10033B would interfere with Rock Tamers mudflaps since there isn't enough clearance between the ball platform and the shank. You would need to go with the 5 inch drop version part # BWTS10037B to ensure that there is enough clearance for the Rock Tamers like the part # ERT00108.
    view full answer...
  • Locking Pins for Mount of B&W Tow & Stow 2-Ball Mount
    Yes, there are locking pins available for the ball mount portion of the B&W Tow & Stow ball mounts, and they will fit the 10,000 lb capacity and 14,500 lb capacity Tow & Stow ball mounts. The correct part is the InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts # 34061775-D. This actually comes with four locks, one to secure the entire ball mount to your hitch receiver, two to secure the ball platform to the ball mount, and one to secure the balls to the ball...
    view full answer...
  • Recommended Ball Mount Like B&W # BWTS10033B But With 1-7/8 Inch and 2 Inch Hitch Ball
    The B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black # BWTS10033B does come in the hitch ball sizes you requested, just with a different part number. You will want the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black # BWTS10035B to get the 1-7/8 inch and 2 inch hitch ball with all of the other features being identical. I've attached a video of this ball mount for you. I also recommend using a hitch lock like # BX8858 to secure your...
    view full answer...
  • Recommended Ball Mount For OEM 2 Inch Hitch Receiver and 6 Inch Frame Lift on Truck
    For your factory trailer hitch receiver and 6 inch lift on your truck, you will want a ball mount with a significant drop so you can tow your trailer level. The B&W # BWTS10033B is a great ball mount, but it will not give you enough of a drop to tow your trailer level. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 9" Drop, 9-1/2" Rise - 10K - Black # BWTS10043B to give you the same functions but the drop needed to account for your lift. I have attached videos to assist....
    view full answer...
  • Recommended 3 Hitch Ball Combination Ball Mount Comparable to the 2 Ball # BWTS10033B
    There is a 3 ball option similar to the B&W # BWTS10033B you referenced. It is the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black # BWTS10047B. This hitch will have all of the same functions with the stowable feature for a clean look that protects your shins, and also the adjustable rise and drop in 1 inch increments to allow you to tow all 3 standard trailer coupler sizes. I also recommend the locking hitch pin # BX8858 to secure your investment and deter theft.
    view full answer...
  • Vertical Dimensions of B&W TS10033B and TS10047B
    The height of the # BWTS10047B B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise is 8-1/2." The # BWTS10033B B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise height is 6-1/2." They do have a stowable design which lets you store the balls and mounting platform under your vehicle. The platform flips underneath the hitch for both models I have attached a video review for both which includes a demonstration of the stowing feature.
    view full answer...
    Image 1 for Image 2 for

< Previous

Do you have a question about this Trailer Hitch Ball Mount?

  • Why

    At we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-496-5010