1. Trailer Hitch Ball Mount
  2. B and W
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 3 Inch
  6. Rise - 3 Inch
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black

Item # BWTS10035B
lowest price pledge
Retail:$227.42
Our Price: $199.00
You Save: $28.42
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 26 lbs
Quantity: 
In Stock
BWTS10035B - Steel Shank - Matte Black B and W Adjustable Ball Mount
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball. Lowest Prices for the best trailer hitch ball mount from B and W. B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black part number BWTS10035B can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (1552)
  • Q & A (87)
  • Photos
  • Why etrailer?

B and W Trailer Hitch Ball Mount - BWTS10035B

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 3 Inch
  • Rise - 3 Inch
  • B and W
  • 1-7/8 Inch Ball
  • 2 Inch Ball
  • Two Balls
  • Class IV
  • 7500 lbs GTW
  • Steel Shank - Matte Black
  • Steel Ball

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.


Features:

  • Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver
    • Ball provides connection point for trailer coupler
  • Stowable design lets you store ball and mounting platform underneath your vehicle
    • Remove pins holding ball mount platform in place on shank
    • Flip platform underneath the hitch
    • Reinsert pins and clips to secure ball mount platform for travel
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Slide ball mount up or down along shank and secure in place with included pins and clips
  • Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch
    • No additional locks required to prevent platform and balls from being removed
  • 2 Different-size hitch balls let you tow trailers with different coupler sizes
    • To switch ball, simply remove pin, rotate balls, and reinsert pin
  • Dual-process chrome plating on balls provides excellent rust resistance
  • Black powder coated shank is corrosion resistant
  • Stainless steel pins create sturdy, rust-resistant connections
  • Durable steel construction with high yield tubing offers superior strength
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight:
    • When used with 1-7/8" ball: 3,500 lbs
    • When used with 2" ball: 7,500 lbs
  • Distance from center of hitch pin hole to center of hitch ball:
    • Hitch pin hole closest to ball: 9-1/4"
    • Hitch pin hole farthest from ball: 10-3/8"
  • Distance from center of hitch pin hole to pin hole in mounting block:
    • Pin hole closest to mounting block: 3-3/4"
    • Pin hole farthest from mounting block: 4-7/8"
  • Maximum drop: 3"
  • Maximum rise: 3-1/2"
  • Incremental height adjustment: 1"
  • Limited lifetime warranty


The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 1-7/8" ball and a 2" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.


Easily Adjusts and Stows

B&W Tow & Stow Ball Mount Operation

To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.


Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.


When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.


Built-In Anti-Theft System

The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.


Single Dimensions

A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.


When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.


How to Measure Drop on Adjustable Ball Mount


TS10035B B and W Stow and Tow Dual Ball Mount - Model 6 - 1-7/8" Ball and 2" Ball - Black




California residents: click here



Customer Reviews

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black - BWTS10035B

Average Customer Rating:  4.9 out of 5 stars   (1552 Customer Reviews)

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.

- BWTS10035B
by:

Looks Great! Love the way it stows away, don't have to worry about banging my leg on my hitch anymore.



- BWTS10035B
by:

I love my B&W Tow and Stow. I'll never own anything different.



- BWTS10035B
by:

Initial thoughts after receiving is great packaging, great looking...quality looking product. Cant wait to use it!



- BWTS10035B
by:

Perfect solution for multiple trailers. We have four different trailers with varied required heights. This hitch works great.



- BWTS10035B
by:

The customer service from etrailer is excellent. This bw stow and go hitch receiver is hands down the best USA made product on the market if you are looking for the best go with bw and e trailer of course !



- BWTS10035B
by:



- BWTS10035B
by:

This thing is very heavy duty and very very well made. I don’t have to worry about buying any others for different trailering items. One of the beat parts is that it’s made in the USA



- BWTS10035B
by:

Quick shipping, fast delivery, product as advertised. Fit my truck exactly,great when towing the bass boat and trailers. I would definitely recommend this product for any one that's tows a vehicle



- BWTS10035B
by:

Great product! If you ever have to change ball sizes, you need this! Not to mention the shin saver feature. Transforms in 10 seconds or less.



- BWTS10035B
by:



- BWTS10035B
by:

Fabulous!! You can not believe how pleased I am with your product. Especially for the fact that it is made in the USA with USA made material. I am tried of all the products made in China. We have a small boat trailer. I hope your company will be around a long time. Thanks



- BWTS10035B
by:



- BWTS10035B
by:

Well made, and in the USA! Finally no more guessing what size ball hitch I will need. Ordered a camper and know this will fit to a "T". I should have bought this years ago. etrailer is my "go to" dealer for anything towing or trailer related.



- BWTS10035B
by:

Product appears to be excellent quality. The tow and stow mechanisms works well and is intuitive. Packaging and protection from shipping was also excellent.



- BWTS10035B
by:



- BWTS10035B
by:

Quick shipping. Will continue to order from etrailer.com in the future. Thank you



- BWTS10035B
by:

Excellent product and quick delivery!



- BWTS10047B
by:

Review from a similar Tow and Stow in Trailer Hitch Ball Mount


Item was described very well. Shipping was fast as well. The ease of changing the ball for the application i need, and stowing away when not needed make this hitch the only one I'll ever own.


Comments
Its working fantastically. So easy to have a one size fits all hitch. I do keep it lubricated just a bit on the pins. But thats because I keep it on the truck year round.
Mark - 05/06/2021


- BWTS20049B
by:

Review from a similar Tow and Stow in Trailer Hitch Ball Mount


Just installed on my f250. I love it! I ordered the 7.5 inch drop with the 3 different trailer ball sizes. Super simple. I recommend getting the silencer pad as well as the locking pin. Super fast shipping and super fast responses from the team. They go above and beyond. Will be towing a car trailer with a dodge 2500 on it this weekend so it came at a perfect time. PS: I have a leveled 2016 F250 on 35x11.50’s. The 7.5 inch drop may be a little bit over kill. Any one looking that has the same truck could probably get by with a 4.5 inch drop.



- BWTS20048B
by:

Review from a similar Tow and Stow in Trailer Hitch Ball Mount


Great product. Extremely well built and looks great. Very easy to put into stow mode and move it back to the positions you want to tow from. The rated capacity of it is great it’ll do everything your truck will do in a bumper pull mode. It is a must for a 19 F-250 with the ride height to get your load level and to make the connection a easier process.


Comments
It’s a great hitch. From height adjustment to having 3 different sized balls that you can tuck and stow out of the way when not in use. Great product with towable weight capacity stamped on it so you now what it can safely tow.
Mark F - 11/17/2020


- BW54FR
by:

Review from a similar Tow and Stow in Trailer Hitch Ball Mount


Honestly, I thought it was a bit over priced at first, but once received, the quality of this product is spot on for the price. I’d 100% recommend the B &W tow and stow hitch sold by etrailer.com



- BWTS20037C
by:

Review from a similar Tow and Stow in Trailer Hitch Ball Mount


Product received quickly and in perfect condition. I'm very pleased with all of my orders from etrailer.


Comments
It has been a year since I purchased my B&W hitch. I use it quite frequently and each time I do Im still pleased with my purchase. If you trailer a lot its worth the money and it looks great. The height adjustability and the 2 and 2 516 balls check all the boxes for the many trailers I have and use weekly.
Shane - 12/01/2020


- BWTS30037B
by:

Review from a similar Tow and Stow in Trailer Hitch Ball Mount


etrailer shocked me with their customer service. The B & W trailer hitch I ordered was out of stock. Within 10 minutes of placing my order at 10:00PM an employee contacted me to make sure I knew it wouldn’t be back in stock until the following week. And also took the time to add links to two different B & W hitches that are similar in case I needed it immediately. Unfortunately that kind of customer service isn’t expected anymore, it really made me feel good. I run several trailers for my business and they earned my business from now on. As for the product itself, exactly as expected. Price was right. And no more swapping between 2” and 2 5/16” hitches. My shines will also appreciate this hitch when walking behind my pickup in the dark!



- BWTS20049B
by:

Review from a similar Tow and Stow in Trailer Hitch Ball Mount


I really like this hitch. I have four different trailers with different tongue heights and all have different size balls. This hitch took care of all of them. Also, stayed in my receiver all winter and the finish is still really nice! The largest trailer I have towed so far is a 10K car trailer, but if I need gravel I plan to tow a 12K+ dump trailer. I'm sure this hitch will handle it.



- BWTS30049B
by:

Review from a similar Tow and Stow in Trailer Hitch Ball Mount


Very stout. Quality. Don't drop it on your toe. Fast shipping. Paired with a good lock.


Comments
Great. Also ordered the draw bar for pulling implements. No more removing my hitch for other trailers.
Jwb - 04/17/2021

30
1613
Show More Reviews

Ask the Experts about this B and W Trailer Hitch Ball Mount

  • Does B&W Make a 2-Ball Ball Mount for a 3 Inch Receiver
    B&W does indeed offer a Tow & Stow 2-ball mount for a 3 inch receiver. Part # BWTS30040B includes a 2 inch and a 2-5/16 ball, and is adjustable up to a 7-1/2 inch drop or a 7 inch rise. Part # BWTS30037B also includes a 2 inch and a 2-5/16 inch ball and is adjustable up to a 4-1/2 drop or a 4 inch rise. I've linked to product description videos for both Tow & Stow ball mounts.
    view full answer...
  • Could B&W Tow & Stow 2-Ball Mount # BWTS10035B Fit 2011 Toyota 4Runner
    We haven't test fit the Tow and Stow on a 2011 Toyota 4Runner so we don't have first hand experience on if it will fit and work well, but I can't see why it wouldn't work. As long as there's nothing under the hitch that would prevent the ball mount from storing like what you see in the attached picture it would fit and work well.
    view full answer...
    Image 1 for
  • Recommended Ball Mount for Ford Escape with Factory Hitch
    Based on your photo it appears your ball mount sticks out about 7 or 8 inches from the center of the hitch pin hole to the center of the hitch ball. This is not a very long measurement and is actually one of the shorter distances for ball mounts. If you want the cleaner look, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black # BWTS10035B which will give you a measurement of 3-3/4 inches from the hitch pin hole to the mounting block and will...
    view full answer...
    Image 1 for
  • Location of Trailer Wiring Harness Connectors on 2017 Subaru Outback Wagon
    The wiring harness # 118467 that you purchased plugs directly into the wiring of your 2017 Subaru Outback Wagon. The connectors are located either behind a panel in the rear cargo area on the driver's side or in the spare tire compartment. You'll have to remove the paneling inside your vehicle to find the harness. The video I've attached shows the panels being removed and the harness at about the 3:00 mark. If you also need a ball mount to tow with your new Outback you might be...
    view full answer...
  • Tongue Weight Capacity of the B&W Tow & Stow 2-Ball Mount
    The tongue weight (TW) capacity of the B&W Tow & Stow 2-Ball Mount part # BWTS10035B will be 10% of the gross trailer weight (GTW) capacity for the respective hitch ball. Therefore, if you are using the 1-7/8" hitch ball the tongue weight capacity is 350 lbs but if you are using the 2" hitch ball then the tongue weight capacity is 750 lbs.
    view full answer...
  • Choosing a Ball Mount for 2015 Subaru Outback with Class III Trailer Hitch Receiver
    To choose the correct ball mount and hitch ball you first need to determine if you'll need a rise or drop to tow your trailer. I've attached an article that explains this but basically you need to measure from the ground to the inside top of the hitch receiver. Then measure from the ground to the bottom of your trailer's coupler. Make sure they're both parked on level ground. If the hitch receiver is higher you'll need a ball mount with a drop and if the coupler is higher you'll need...
    view full answer...
  • What is Maximum Rise of the B&W Tow & Stow 2-Ball Mount # BWTS10035B
    When used in the maximum rise position the B&W Tow & Stow 2-Ball Mount # BWTS10035B would have a distance of 3-1/2 inches from the top of the shank to the top of the ball mount platform.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch and Wiring for 2018 Toyota Highlander
    For your 2018 Toyota Highlander, I recommend the etrailer.com Class III hitch # E98844 which has a nice matte black powder coat that matches the rear trim well. It has a high weight capacity and will work very well for your vehicle. I've attached a photo to assist. If you want a hidden cross tube, then the only option we currently have is the EcoHitch # 306-X7250 which is a nice clean look with a little more ground clearance. Then I recommend the Tekonsha T-One Vehicle Wiring Harness...
    view full answer...
    Image 1 for
  • Recommended Best Trailer Hitch Receiver When Comparing Options for 2019 Honda CR-V
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 76128 , the Curt Trailer Hitch Receiver # C13397, and the etrailer # e98848 are all very similar. They will install in the same location on your Honda frame but they are rated for different load capacities and both of these capacity ratings greatly surpass the manufacturer towing capacity outlined in your owners manual, so I don't recommend making that the determining factor. The Curt # C13397 or the etrailer # e98848 is my recommendation...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch Fit for 2018 Porsche Macan
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75940 has not yet been tested on a 2018 Porsche Macan, so I can't confirm that fit. Instead I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13136 which has been tested and confirmed to fit your 2018 Porsche Macan. The fit is also compatible with the similar Audi Q5, so I've attached a photo and a video of that installation to assist. The trunk pan underneath your vehicle will...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch Receiver and Wiring for 2013 Mercedes-Benz GL450
    For your 2013 Mercedes-Benz GL450, the Curt Trailer Hitch Receiver # C13190 is a confirmed fit. This is the only trailer hitch we have confirmed to fit your vehicle as long as you DO NOT have the Active Curve system. It will fit 2013-2016 models of the GL450. I've attached the installation details to assist which includes photos to help. The Curt Trailer Hitch Receiver # C13102 is a fit for 2007-2012 models of the GL450. For your 2013 model year, you will want the Curt # C13190....
    view full answer...
  • Best Trailer Hitch Receiver for 2018 Toyota Sienna
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 75237 is the best trailer hitch receiver in my opinion for your 2018 Toyota Sienna. It has the 2 inch receiver to give you the most options and is the easiest to install. It also has the 675 lbs tongue weight rating which is the strongest of all our options for your vehicle. There is some trimming of an underbody panel required, but there is no fascia/bumper trimming required. If you will be towing with this trailer hitch then I recommend...
    view full answer...
  • Recommended etrailer.com Trailer Hitch Receiver for 2018 Subaru Forester
    For your 2018 Subaru Forester 2.5, I recommend the etrailer.com Trailer Hitch Receiver # E98839. This hitch is made by Curt Manufacturing for us and has the really nice matte powder coat finish. It is an easy installation that will take a novice about 60 minutes and a professional about 30 minutes. It does require slightly lowering your exhaust and enlarging holes for this installation as well as removing the heat shield. For your wiring, I recommend the Tekonsha T-One Vehicle Wiring...
    view full answer...
  • Can 2015 Lexus GX 460 Tow 6,500 lbs with Aftermarket Hitch?
    We only have two aftermarket hitches confirmed to fit your 2015 Lexus GX 460 and both max out at 5,000 lbs towing capacity and are not rated for using weight distribution systems. There is not an option to get the 6,500 lb capacity of your the factory system. The hitch will be the limiting factory for your towing. If you want to add the 5,000 lb capacity, you can use the Curt # C13043 or Draw-Tite # 75685. These are very similar hitches that install in the exact same location. I...
    view full answer...
  • Recommended Trailer Hitch Receiver and Installation on 2018 Jeep Renegade
    That is definitely not true for an aftermarket hitch to be added to your 2018 Jeep Renegade. I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver # 76021 to get a 2 inch hitch receiver opening compatible with more accessories and ball mounts. I've attached a video of this installation for you to check out so you can see the ease of install and that the bumper doesn't even get adjusted at all. It will take an estimated 40 minutes for this install according to the attached...
    view full answer...
  • Recommended Trailer Hitch Receiver, Wiring, and Ball Mount for 2018 Jeep Compass New Body Style
    For your 2018 Jeep Compass with new body style, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76144. I've attached a photo of a customer's install to assist in the final look. I don't know if there is a reason why the manufacturer didn't access the frame rails from the bumper, but I assume it is the amount of time for install. This methos of install is suggested to take the average professional installer about 40 minutes. According to the...
    view full answer...
    Image 1 for
  • Recommended Trailer Tow Package for 2018 Toyota Sienna for Pulling Camper
    For your 2018 Toyota Sienna I recommend first starting with the etrailer.com Trailer Hitch Receiver # E98853 because of its capacity for towing and ease of use for accessories like a bike rack. It has a hidden crosstube for the cleaner look and also for increased ground clearance. I've attached a photo to help. Then for your trailer wiring I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118498. This harness will connect to your factory wiring located...
    view full answer...
    Image 1 for
  • Recommended Towing Setup for 2018 Toyota Sienna
    On your 2018 Toyota Sienna, the bumper does not get trimmed at all when installing the Curt Trailer Hitch Receiver # C13343. Only the underbody panel gets trimmed. I've attached a video to assist. The wiring harness needed depends on the trim model. If you have the SE trim then you will need the harness # 118498 , where all other models will use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118648. You will need to run the 12V power wire to your battery,...
    view full answer...
  • Recommended Trailer Hitch, Wiring, and Ball Mount for Lexus GX 460
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13043 for 2010-2019 Lexus GX 460 models is rated for 5,000 lbs towing and 500 lb tongue weight. The trailer and Honda Foreman 4 wheeler you mentioned will not be an issue for this trailer hitch and your vehicle. You will also need the trailer wiring and the confirmed fit for your vehicle is the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This wiring...
    view full answer...
  • Can a Ball Mount Be Used In Place of the Tri-Ball On the Curt Multi-Ball Ball Mount
    I do have an option for you but the Replacement 2" Receiver part # C45802 does not accept a standard ball mount. It only works with the Replacement Tri-Ball part # C45800 which when combined with the Replacement Shank part # C45059 would give you the Curt Multi-Ball Adjustable Ball Mount part # D900. In other words, you cannot use a standard ball mount in place of the tri-ball on the Curt Multi-Ball Ball Mount. If this is not what you are asking please just let me know. If you are looking...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2018 Chrysler 300C
    For your 2018 Chrysler 300C, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76145. This is a 2 inch receiver that is rated for up to 675 lbs tongue weight. I've attached a video of this installation to assist. The plastic underbody panel will be permanently removed with this installation. If you will be towing with this trailer hitch, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118658. This harness will connect to your factory wiring...
    view full answer...
  • Recommended Trailer Hitch Receiver and Wiring for 2018 Highlander Hybrid Limited Platinum
    The Curt Trailer Hitch Receiver # C13200 is a confirmed fit for your 2018 Toyota Highlander Hybrid. This will install into factory weldnuts in your vehicle frame and will require some trimming of an underbody panel. I've attached the installation details to assist as well as that specific trimming diagram. Then for your vehicle trailer wiring I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56217. This harness will connect to your factory...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch and Wiring for 2018 Nissan Leaf
    The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7221 is a confirmed fit for the 2018 Nissan Leaf. I've attached the installation details that show absolutely no drilling required but trimming an underbody panel is required which you confirmed is okay. I've attached a photo of this hitch installed on a 2018 Leaf to assist. For your trailer wiring I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56227. The new model does...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver for 2018 Chrysler Pacifica Hybrid
    I reached out to my contact at Draw-Tite, and you are correct that they just added that adapter. We are adding it to our site to give you the fit you are seeking for your 2018 Chrysler Pacifica Hybrid. This will require purchase of the Draw-Tite Max-Frame Trailer Hitch Receiver # 76046 and also the kit # 76046SK. For your trailer wiring, I recommend the Upgraded Circuit Protected ModuLite with 4 Pole Harness and Hardwire Kit - Includes Tester # 119179KIT. This kit draws power directly...
    view full answer...
  • Trailer Hitch Recommendation for a 2018 Subaru Impreza Wagon
    For your 2018 Subaru Impreza Wagon, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver- 2" # 76209 for the price point, but if you want a cleaner look and better ground clearance from the hidden crossbar then you will want the EcoHitch Hidden Trailer Hitch # 306-X7350. Both of these options offer a 2 inch receiver for your ball mount or accessory. If you will be towing, I recommend the B&W Tow & Stow 2-Ball Mount # BWTS10035B which will allow you to adjust the ball height for...
    view full answer...
  • How to Choose the Correct Tow and Stow Ball Mount to Pull a Boat Trailer
    In order to choose the correct ball mount, you will need to take a couple quick measurements first. With your F-150 parked on level ground, measure from the top of the receiver opening to the ground; your Triton 21 should also be parked on level ground, and you'll need to measure from the bottom of the coupler to the ground. If the height of your hitch is greater you'll need a Tow and Stow with the appropriate drop. Should the height of your coupler be greater, you will need a Tow and Stow...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for a 2008 Acura RDX
    For your 2008 Acura RDX, the two 1-1/4 hitch receivers you mentioned, # C12004 and # 36427, have the same tongue weight and towing weight ratings. They both have a similar design and mount. One distinguishable difference is that the Curt hitch is made in the USA and the Draw-Tite hitch is made in Mexico. Also, Curt requires the use of a stabilization strap, like part # 18050, when carrying any non-trailer loads such as a bike rack or cargo carrier. If you choose to tow a trailer,...
    view full answer...
  • Recommended Best Trailer Hitch Receiver for Bike Rack and Trailer Towing on 2019 Audi Q5
    We have a couple trailer hitch options confirmed to fit your 2019 Audi Q5. We have the Draw-Tite Max-Frame Trailer Hitch Receiver # 76183 and the Curt # C13331. Both are a similar installation with the same rated capacities. The Curt hitch is my recommendation as it is more user friendly with accessory fit due to better bumper clearance while still being almost flush with the bumper when not in use. If you will be towing with this hitch, I recommend the ZCI Circuit Protected Vehicle...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Sarah W
Updated by:
Sarah W
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.