bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11367
lowest price pledge
Our Price: $181.47
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 20 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Lowest Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11367 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (115)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - C11367

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • CURT
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitches assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11367 Curt Class 1 Trailer Hitch Receiver

Installation Details C11367 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11367

Average Customer Rating:  4.9 out of 5 stars   (115 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

Real nice quality. Good welds, nice powder coat finish. I did make it a bit better by making it a 2” receiver..but not totally necessary. Just fits my other hitches that way.




by:

I bought this receiver just a few days after I bought my new car. I decided to have a local shop install it for me, to the tune of $250ish, and it was well worth not messing with parking sensors and removing bumpers, so I can't speak to the ease (or lack thereof) of install. I have a 2018 BMW 4 series, for reference. I have had this receiver on my car for nearly a year, and I absolutely love it. It sits flush with the bumper so when I remove my rack, it's barely noticeable. I absolutely recommend it.


Comments
Have had absolutely no issues this last year! Got an add-on for my 1up so its now a 2up and the receiver works perfectly!
Chrissy - 01/31/2022


by:

My trailer hitch was a perfect fit !! Although not designed for my particular car model, I found out online that it would adapt….and after a few hours of installation time I have a great solution my needs. No special tools needed.


Comments
Still works great. I use this particular hitch to haul two bicycles about 3000 miles a year with a kuat rack. I use straps between the bikes and the trunk lid to limit rocking. I now have 3 cars with Curtis hitches.
Randy - 10/01/2022


by: 06/02/2021

After 1 year of service, my hitch is performing flawlessly. It's mounted on my 2011 BMW 335i, which is my baby. NOTHING goes in or on that car without first being checked out thoroughly. This hitch is no exception and it's worked out nicely. One of the things I like most about the hitch is how snugly it fits under the bumper (see photo). Ground clearance is already an issue with this car and I didn't want to make it any worse.
After 1 year, hitch is doing fine.




by:
2015 BMW 3 Series

Installed on a 2015 328i xDrive Sport Wagon. My car has the M Sport package, backup sensors, and the hands-free trunk release, all of which are unaffected and fully functional after installing the hitch.

Per the instructions, I did have to remove and leave off the rear half of the heat shield (front half that goes above and in front of the muffler remains installed). Make sure you reinstall the bolts above the muffler holding the rear half of the heat shield because they also hold the front half of the shield up.

I did not have to jack up the car or lower the exhaust to remove the heat shield or install the hitch. That being said, the three nuts above the muffler (holding the heat shield on) and the screws in the wheel well were a tight squeeze with the socket wrench. It would have been easier if I had removed the wheels.

It took much longer than expected because one of the bolts for the bumper had too much paint on it and was jamming the nut, but aside from that issue (fixed by using WD-40, a breaker bar, and an impact socket), the install was manageable.




by:
2013 BMW 3 Series

Installation video was super helpful - laptop in the garage to follow along and pause, etc. I'm definitely a do-it-yourself guy with most automotive things, and while it's annoying to take the bumper off, there's nothing too crazy. I have to believe it's much easier to back the car onto ramps as I did. As for the hitch itself, I use it regularly for a bike rack but nothing else, and I have zero complaints. It's fairly hidden so not obnoxious.


Comments
Zero complaints after a year. It does exactly what I need it to!
Kyle L - 11/07/2018


by:

It works beautifully, is inconspicuous, and appears to be quite sturdy. I paid to have it installed so I can't speak to the installation process, but the directions seemed straightforward (I didn't want to risk damaging something with my fumble-fingers).

I use it mainly for carrying bicycles. I have a rack holds 2 e-bikes and the hitch receiver performs flawlessly.




by:

Great hitch. Only 4 stars because of how much needs to be removed from the back of the car to install. Rear tail lights, rear bumper fascia and muffler heat shield needed lots of trimming to fit.




by:

Great customer service as usual! Arrived un-damaged as expected. The hitch is sturdy, cleanly painted & solid.

I was somewhat concerned about the installation given that instructions were for a BMW F30 (sedan) v. a F31 (sport-wagon), which is what I own. However, I had no challenges except for the heat shield.

Some online forums suggested removing it entirely, which I could have done, but it seemed like having some of it in place was better than none. So, I cut it to fit as best I could. In hind sight I was a bit aggressive, but successful nonetheless.

Hitch fits very well and I didn't have to cut the bumper which I was happy about.

I only use the hitch for my bike rack, but when going down the highway, things do wobble around a bit, so in hind sight I might have been better off if I had opted for the 2" receiver.




by:
2018 BMW 4 Series

The installation was easier than I thought on my 2018 BMW 430i. The video I watched had you drop the muffler to remove the rear portion of the heatshield (it was never put back on). Instead, I removed the bumper skin and bumper to have easy access to the heatshield. Then used a tin snips to custom cut the heatshield to allow placement of the hitch. All was accomplished without the use of a hoist or ramps.
Also, on the hitch itself, the 1-1/4 inch receiver tube only has 1 hole for the 1/2 inch threaded pin needed to secure my Swagman Rack receiver bar. That hole is 1-1/2 inch into the tube opening. I drilled another 1/2 inch hole 3 inches into the opening. Now the receiver bar uses the full length of the receiver tube and is much more stable. Also, the Swagman Receiver bar has a second hole that I can place another bolt through for even more secure fit.




by:
2015 BMW 3 Series

This Trailer Hitch is the real deal. Great material, great gloss black powder coat. Easy to install.

There are a few steps I did not need to take in the installation that the video instructs you to do (lower exhaust off of bracket and remove heat shield) but the video is very helpful.

Was worried about fitment with the M Sport bumper but it clears perfectly. Very cool product, well engineered. Beats spending $600+ for roof racks! (Before buying basket/bike rack)

Shipped quickly as well!




by:

Installation was very straightforward on my 2016 228i xdrive coupe, non-M sport car. I did have to do some very minor cutting of the rear bumper fascia above the receiver to make it fit without bowing the fascia excessively.

Durability wise, no complaints. Nothing has loosened or rattled around. The paint is still in great shape after about 25,000 miles despite all the salt on the roads here.

I don’t use the hitch to tow, I use it to hold a bicycle rack. I’ve put about 70 pounds worth of bikes on a ~50 pound hitch, a Saris Superclamp 2, and the hitch receiver is no worse for wear.




by:

This was my second hitch and as before, the service was superb from purchase to delivery. There were timely updates between deliveries.

This hitch was for a 2016 BMW 320i.




by:
2013 BMW M Sport Package

Installed Curt Hitch #C11367 on my 2013 BMW M Sport Package Sedan. Fits perfectly with no issues at all. Not sure why curt only shows it available for the 328i. Get it.


Comments
S.G. what did you do for the heat shielding? Trim it or leave it off? Any issues if you left it off?
-- comment by: A. M - 09/13/2015


by:

Works like a champ. One thing though. I didn’t pay much attention to the ‘degree of difficulty’ rating when I bought this item. I had to basically disassemble the back of the car to install the hitch. I don’t think an average DIY customer could do this.




by:
2018 BMW 3 Series

I had the product installed on my 2018 330i Xdrive today. I had my dealer do it, since the website made no claim that it would work on an Xdrive, and some reviewers hinted at a “challenge” relating to a heat shield. Also, one reviewer sawed out a piece of his bumper! I wasn't going to do this, that's for sure.

Installation took the technician 2 hours (I thought I saw a claim of 30-45 minutes?), and there was indeed an issue relating to the heat shield that sits between the muffler and the back bumper. It was not possible to put the shield back as it was originally, because the hitch is in the way. I told him to fasten the shield to its screw holes on the bumper using cable ties so it won't flap and rattle. He and his manager were perfectly OK with this. My only complaint is that now from a distance (say 20 feet) you can see the bright aluminum heat shield hanging under my black car. Maybe I'll need to paint the shield black.

All in all, I'm happy to have a hitch!


Comments
According to Curt, the heat shield should be removed and not reinstalled. The hitch itself will serve as a heat shield.
-- Etrailer Expert Mike L - 07/16/2019


by:

“NOAH E” helped me selecting the right set up! Great customer service highly recommended!!
High quality receiver hitch, fits the 3series as described! Works great!!




by:

Works great with my bike rack. Mechanic said installation was easy. The receiver was too high so the back skirt of the car needed about 1 X 2 inches cut out.




by:
2014 BMW 3 Series

Very easy install. Did not have to remove heat shield or bumper wires on a base 328d 2014 like the video suggested. Exhaust was so not in the way, and those bolts didn't need to come out lol

Also the black plastic boxes underneath can stay too, no need to remove them.




by:
2014 BMW 3 Series

Installation is time consuming, but certainly doable at home if you follow the instructions step by step. Watch the video on the website; it's much better than the written instructions. One thing the video doesn't mention is the heat shield isn't replaced. The final product is very clean and hardly noticeable.




by:

We purchased this for our bike rack. Now I wonder what else we could use it for. This is an excellent trailer hitch!




by:
BMW

On 28 September 2019, I ordered a Curt Class I Trailer Hitch - 1-1/4 and Kuat Transfer 1 Bike Platform Rack (For Fat Bike) for installation on my 2013 BMW 328i. The items arrived quickly. Since I work overseas, finding a reputable shop to install the hitch was a challenge. Fortunately for me, etrailer has an excellent how-to video for installing this hitch on a 2013 BMW 328i. The video came in very handy because the mechanic was used to working on trucks and different types of hitches. The installation took approximately 3 hours to complete. So far, both the hitch and platform are working great. As for the platform, it will barely fit 4.8" or larger fat tires (see pictures of my 5" tires) and the front tire must be partially deflated in order to secure the bike properly. Also, the clamping mechanism on the fat tire straps broke after one use. They are a complete waste of $$ IMO. I highly recommend using either rubber tarp straps, bungee cord, or heavy duty velcro straps to further secure the frame and rear wheel. I hope this review helps and let me know if you have any questions. Happy trails!!




by:
2019 BMW 4 Series

Etrailer directions were comprehensive as usual. Just followed the video and had the hitch on my 430i in a little over two hours.




by:
2015 BMW 3 Series

The fact is that the hitch is well made and I have no complaints at all with etrailer. They did a great job. However, be aware that curt does a terrible job with the installation instructions. The instructions are embarrassingly poor. I have a semi-pro garage with all of the tools and it required 3.5 hours to install this on a 2015 BMW 328i wagon. Unfortunately Google wasn't much help either. But it's not rocket science, and can be figured out. It's just a LOT more involved than implied in the marketing material.

You MUST remove the rear heat shield section. The "maybe" provided by Curt is another example of their simply not doing diligence.

Anyway, a good hitch with less than no installation instructions. If I'd known I'd have recorded the process and youtube'd it for future explorers. Pleased with the purchase and etrailer. Obviously a bit riled at Curt. : )




by:
2014 BMW 3 Series

BEWARE OF COMPATIBILITY CLAIMS. I have a 2014 320i xDrive sedan and the hitch is not compatible with the heat shield. After working to install everything, I found that the base plates for the hitch did not fit the shape of the curve of the heat shield AND the hitch itself prevented the heat shield from attached back onto the bottom side of the bumper skin. As an installer of average skill (not a mechanic), it was very disheartening to have done all this work to run into this issue at the end.

The product did ship very quickly (with regular shipping) and arrived undamaged. The hitch did fit on the bolts it was supposed to. Just the issue with the heat shield compatibility.



25
115
Show More Reviews

See what our Experts say about this CURT Trailer Hitch



  • Does the Heatshield of a BMW 3 Series Need to be Removed to Install the Curt Hitch
    I understand your worry. However, the Curt Hitch for the 2017 BMW 330i and 2018 430i, part # C11367, do need to be removed for the installation. There is good news, though. According to Curt, the hitch will act as a heat shield in itself and do a much better job since the hitch is constructed of a much heavier steel. Also, the heat shield can be trimmed after being removed so it can be reinstalled. That's not necessary to do since the hitch will do a better job, but it is still an option. In...
    view full answer...
  • Correct Trailer Hitch for a 2018 BMW 330i Sport Wagon
    The Curt Trailer Hitch Receiver part # C11367 is listed as a confirmed fit for a 2018 BMW 330i Sport Wagon. In regards to the heat shield, this will need to be removed per the installation instructions. It may be able to be reinstalled with trimming but I would not be able to advise on this.
    view full answer...
  • Is There a 2017 BMW 330i xDrive Trailer Hitch Fit
    The Curt Trailer Hitch Receiver - Class I - 1-1/4" # C11367 is most likely a fit for your 2017 BMW 330i. The manufacturer just doesn't add it to the official fit until they have physically tested it. Based on the other xDrive fits, it is highly likely it will fit according to my tech contact at Curt.
    view full answer...
  • Recommended Trailer Hitch For 2014 BMW 428i Convertible
    Yes the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part # C11367 is a fit for the 2014 BMW 428i convertible with sport rear bumper. This will give you a 1-1/4" hitch on the back of the BMW, this is the only fit for the 4 Series of BMW. I have attached an installation video for your reference.
    view full answer...
    Image 1 for
  • Does Bumper Need to be Cut to Install Curt Trailer Hitch on 2017 BMW 4-Series
    The time it looks like the fascia would need to be cut is for a 2016 2-series. Since you have a 4-series you should be just fine installing the Curt Trailer Hitch Receiver # C11367 without having to cut into your fascia. Attached is a sample installation video for you on a 4-series. If you let me know what you plan on using the trailer hitch for I can make some recommendations for you.
    view full answer...
  • 2015 BMW 428i Convertible Coupe not xDrive Trailer Hitch Recommendation
    Yes, for your 2015 BMW 428i coupe non-Xdrive we have the Curt hitch part # C11367 which is a confirmed fit. We recently found out this hitch fits your vehicle so it would be a great option.
    view full answer...
  • Does Curt Trailer Hitch for 2017 BMW 3 Series Require Cutting of Rear Bumper
    I checked the install instructions for the Curt hitch part # C11367 that you referenced and there is not cutting of the rear bumper required when installing it. It also would not interfere with a hands free lift gate either. At worst you may just have to kick to either side of the hitch opening.
    view full answer...
  • Recommended Trailer Hitch and Estimated Installation Time for 2015 BMW 228i Coupe
    The Curt Class I Receiver Hitch # C11367 referenced in your question is indeed confirmed to fit your 2015 BMW 228i Coupe. This is a really nice, Class I hitch that will use existing holes in your vehicle's frame for a no-drill installation. It will provide you with a 1-1/4 inch receiver that will work nicely for light duty towing or with hitch-mounted accessories like a bike rack or cargo carrier. The installation for the hitch does require temporary removal of the bumper/fascia, along...
    view full answer...
  • Does Curt Hitch part # C11367 Fit 2014 BMW 328d xDrive Wagon
    Yes, the Curt hitch part # C11367 does fit the 2014 BMW 328d xDrive Wagon that you mentioned. We had a customer come back with basically your exact vehicle and say that this hitch fit and worked well! This would have more than enough capacity for your trailer too.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2014 BMW 328d xDrive Wagon
    The Curt Class I trailer hitch # C11367 is a confirmed fit for your 2014 BMW 328d xDrive Wagon. To help you with your installation I have linked the written instructions, a helpful article and a video showing installation on a 2015 model year 3-Series. The hitch comes with the required installation hardware and includes a hitch pin and clip. You can use a compatible 2-bike Class I hitch bike rack or a cargo carrier with this hitch, but such non-trailer loads require you to use a stabilizing...
    view full answer...
  • Installation Difficulty for the Curt Hitch # C11367 for BMW 320xi
    As far as hitch installs go the # C11367 that you referenced would be one that is a bit more involved than the others. The install difficulty is rated at 9 out of 10 on our site, but that is more related to just the amount of time it would take to install the hitch. Basically this hitch would take about an hour and a half to install. If you have basic tools and mechanical skills this hitch wouldn't be a problem for you at all. If you wanted to see what it would take to install this hitch...
    view full answer...
  • How Is Heat Shield Reinstalled After Installing Curt # C11367 Hitch on 2014 BMW 328i
    I spoke with my representative in the Tech Services department at Curt Manufacturing. According to Curt, the heat shield that's removed in step 2 is NOT reinstalled. Once the hitch is in place, there is no longer room for the heat shield, and the hitch actually does a much better job as a heat shield than the thin piece of metal would. If there's a possibility you might remove the hitch later to sell or trade in the vehicle, you can keep the heat shield for later reinstallation. Otherwise,...
    view full answer...
  • Trailer Hitch Recommendation for a 2015 BMW 328d X-Drive
    I spoke to my contact at Curt and right now the 2015 BMW 328d X-Drive is confirmed as a fit with the # C11367 that you referenced. If that is what you have then this hitch would fit and work well. If you do have a 328id non-X-drive then right now we don't have anything tested and confirmed as a fit.
    view full answer...
  • Does the Heat Shield of a 2014 BMW 328 Grand Tourismo Need to be Removed to Install Curt Hitch
    Curt states that the heat shield needs to be removed to install the Curt Hitch part # C11367. According to Curt, the heat shield that's removed in step 2 is NOT reinstalled. Once the hitch is in place, there is no longer room for the heat shield, and the hitch actually does a much better job as a heat shield than the thin piece of metal would. If there's a possibility you might remove the hitch later to sell or trade in the vehicle, you can keep the heat shield for later reinstallation....
    view full answer...
  • Availability of a Trailer Hitch to fit a 2013 BMW 335i M Sports Package Sedan
    We did have a customer come back and say that they were able to install the Curt Hitch part # C11367 on their 2013 BMW 335i M Sport package sedan. I attached the picture that they send in of it installed. A lot of times Curt will not list certain vehicles as fits just because they weren't able to test the vehicle with it.
    view full answer...
    Image 1 for
  • Will the Curt Hitch part # C11367 Fit a 2014 BMW 328d xDrive Sports Wagon
    Curt has their Hitch part # C11367 as a confirmed fit for your 2014 BMW 328d xDrive Sports Wagon so we can guarantee it will fit. I attached an install video for you to check out as well. I also attached a link to our returns page.
    view full answer...
  • Dimensions of Curt Class I Trailer Hitch # C11367 to Determine Fit on 2015 BMW 3 Series
    When somebody asks about the dimensions of a hitch, it usually means they're wanting to install the hitch on a vehicle that hasn't been fit tested. I've heard reports that there's info from online forums where it's said that this particular hitch will fit many different BMW models. Curt has not tested the fit of their # C11367 on vehicles other than the 2014 BMW 328D Sedan, the 2012-2015 328i Sedan or the 2013 BMW 328i xDrive Sedan. Curt can't confirm or deny (or warranty) fit on any other...
    view full answer...
    Image 1 for
  • Hitch Recommendation for a BMW 2014 328d
    The Curt Hitch part # C11367 that you referenced has been confirmed as a fit for your 2014 BMW 328d that you have so it will work well. The installation instructions link I attached applies to both the I and D models so it is the correct process for your vehicle. The range for the trunk sensor will be limited the hitch being installed, but it should still work.
    view full answer...
  • Trailer Hitch Recommendation for a 2014 BMW 328 Wagon
    We have had our customers come back and tell us that the Curt hitch # C11367 is a fit for the 2014 BMW 328 wagons so this hitch would work for you. The range for the trunk sensor will be limited with the hitch being installed, but it should still work.
    view full answer...
  • Trailer Hitch to Tow a Jet Ski Trailer with a 2013 BMW 328i xDrive
    The Curt trailer hitch # C11367 will fit your 2013 BMW 328i xDrive (which seems to replace what used to be called the 328xi). But you will want to consult the owners manual to determine if the vehicle is rated for towing and, if so, what its capacities are. The hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight but if the vehicle is rated lower you need to go by the lower rating. I have linked the instructions for you to view so you can determine if this...
    view full answer...
  • Hitch and Wiring Harness Availability for 2014 BMW 328D Sport Wagon
    The class I trailer hitch you referenced, Curt Trailer Hitch # C11367, is not a fit for your 2014 BMW 328D 3-Series wagon; it is a fit for the 328i and 328D sedans only. I also checked with my technical contacts at Draw-Tite and Hidden Hitch and there are no hitches or wiring harnesses planned for your particular vehicle. Please note that my research on your vehicle did not reveal any rated towing capacity. If your intent was to use a hitch-mount bike rack on your 328D wagon you can instead...
    view full answer...
  • Fit of Curt # C11367 Trailer Hitch on 2014 BMW 328D Sedan
    According to my contact at Curt Manufacturing, the # C11367 is a confirmed fit for your 2014 BWM 328D sedan. It is a fit for diesel models with the single muffler. If you click the provided link, you can see an install video.
    view full answer...
  • Trailer Hitch Availability for 2014 BMW 335i xDrive Sedan
    For your 2014 BMW 335i xDrive Sedan with a single muffler we can offer a 1-1/4-inch Class I hitch from Curt, their part # C11367. This hitch installs without drilling and includes the required hardware. Basic tools, including a torque wrench like # ALL944001are required for installation. The bumper and heat shield need to be temporarily removed for hitch installation. I have also linked for you our main page for all accessories for your 2014 BMW 335i.
    view full answer...
  • Recommended Hitch for a 2014 BMW 328d
    According to my contact at Curt Manufacturing, the # C113672 has been confirmed to fit the 2014 BMW 328d that you have so I would recommend it for you.
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Jared G
Test Fit:
Jared G
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830