bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13119
Retail:$195.78
Our Price: $141.89
You Save: $53.89
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 30 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13119 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (764)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - C13119

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • CURT
  • Visible Cross Tube
  • 350 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13119 CURT Class 3 Trailer Hitch Receiver

Installation Details C13119 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13119

Average Customer Rating:  4.9 out of 5 stars   (764 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:
2012 Honda CR-V

Hitch was processed quickly. Received hitch 2 days before scheduled delivery, thank you FedEx.

I highly recommend watching the installation video. If I had not watched it, I would not have thought you needed to put lower cover panel on the hitch at the same time when you bolt the hitch on. This can be tricky. I zipped tied the panel to the hitch on the passenger side. Plus I used utility knife to cut the plastic. Much cleaner than using a dremel.

Besides the panel covering, the installation is straight forward. My hitch lined up perfect to the Honda mounting points. Luckily I am a Honda tech, so I had all the tools needed and the availability of a vehicle hoist. Still needed help holding the hitch up to start a couple bolts. More power to those that installed theirs at home with the vehicle on the ground.

Hitch looks great installed. I just wished receiver was tucked a little more.


Comments
Hitch has been great. Just wish my bike rack had less play. No fault of the hitch.
Sam - 06/27/2021


by:
2015 Honda CR-V

On the first delivery, after unboxing and trying to install the hitch, it turned out the hitch was bent on one side. There was no outward damage to the box, so I don't know how that happened. The second issue were that the flanges on the flange nuts were too wide, meaning they would overlap as they are supposed to be side by side.

I called eTrailer during the weekend, explained the situation, sent them pics, and they issued a return label for UPS drop off, and sent a new hitch within one week. I kept the hardware from the first delivery just in case something was missing from the new delivery.

The installation went well and they sent the correct flange nuts on the second delivery. Now it's time to put on my bike rack and get to the trails. Overall great service. Will need more time to comment on performance, but I think it will be fine if the welds hold.

Was meticulous about taking picures, but for some reason I could not upload the most important ones.


Comments
It sounds like that the side brackets were knocked out of alignment which can happen while in transit to our facility or to you. We do have a FAQ that can assist with moving the side brackets of the hitch back into alignment.
-- Etrailer Expert Jenny N - 12/06/2021


by:
2013 Honda CR-V

Everything lined up nicely. Holds the one up bike rack great.




by:

Over the years I purchased several trailer hitches and related products. I have always experienced exceptional service! My latest purchase of a hitch for my 2015 Honda CRV was no different except that there was a couple pieces of hardware missing. When I called there was no questioning or hesitation, the missing parts were very quickly at my door! I can’t say enough about how satisfying it is to deal with this company.




by:

It is hard to believe how fast the hitch receiver arrived. I ordered the Curt Hitch Receiver on Saturday and between etrailer and UPS it traveled from Missouri to Pennsylvania and I had it installed by Wednesday. Directions were good, all the hardware included was good and the install was easy. Product was well packed, looks good and works well.


Comments
Still working well. Used for motorcycle trailer and KUAT bicycle rack in the past month.
Garyz S - 07/24/2022


by:

This hitch has performed flawlessly from day 1 and all days after. The support from etrailer is great, especially the tutorials for installation. Keep up the good work!


Comments
It has been a year since I installed the hitch on our vehicle and I am happy to report it is as good today as it was the day we installed it. I use it 3-4 times a week without issue.
Shawn - 08/25/2022


by:
2016 Honda CR-V

Curt 13119 trailer hitch
Product arrive
in 5 days in excellent condition. Packaging was good, accessories order were taped to the hitch packing so there was no possibility of getting lost. Hardware was taped inside the receiver, so secure location and easy to find.
Gloss black finish was perfect.
Installation:
Read the instructions, watch the etrailer videos, and read the reviews! You can pick up some great tips in the reviews.
Definitely lubricate the exhaust hangers. It makes a world of difference going on or off, especially if you don’t have a special tool for that.
A wire brush WILL be necessary to clean the weld nuts on the exhaust (passenger) side. A tap or thread chaser is probably overkill except in extreme cases. Run all four bolts in and out of the nuts prior to lifting the hitch to make sure they will start as easily as possible.
I did not cut the plastic so there was the standard gaping hole. I removed the plastic underbody panel and used the cutout dimensions in the instructions as a starting point. I measured the prescribed 16.5” plus 1/4” from the edge of the toe hook slot, drilled two 1/2” holes about 7” apart and made straight cuts with a sharp utility knife to connect them.
I then slipped the panel over the driver-side hitch flange prior to moving the hitch under the vehicle.
Since I was installing mine solo, I attached the u-bolt nuts first as they were the easiest to get to. (There is no need to do the most difficult bolts - the front ones on both sides - first, because they become easier when the others are already installed.)
I had a bit of a problem getting the plastic panel to seat correctly, which turned out not to be my measuring and cutting, but rather the panel being slightly pinched by the hitch. A firm tug toward the front of the vehicle using both hands and work gloves, of course, made it pop right into place.
After this, it was just a matter of tightening all bolts to spec and replacing all the pins, bolts, and screws that were removed for the install.
One more note: Safety First! An awful lot of road debris can be caught in that panel and some of it WILL drop on your face. Always wear safely glasses and gloves when performing automotive work!




by:

The package was dropped off in front of my garage door. If I hadn’t opened up the door before I got into my vehicle I could have backed over it damaging both my vehicle and the trailer hitch. Just thought you would like to know how the delivery driver did. I was very disappointed with the Delivery!!!!! I haven’t installed the hitch yet.




by:
2014 Honda CR-V

Purchased the Curt C13119 hitch from etrailer for a new 2014 Honda CR-V after going over the wealth of product information available on the site that reassured that I'd be getting the right product. I have a Thule bike rack that we used on our previous car and 2" hitches are not available from Honda dealer installation. I'm not a big DIY guy so had our local shop install it. We only use it for a bike/ski rack, not towing, so I know I won't be overloading it. Also purchased the stabilizer strap for the rack (see photos bellow) as per Curt and Etrailer.com's recommendations to preserve warranty. It's not much extra effort to install and adds piece of mind that it's relieving some of the stress on the hitch. We got all this just days before going on a long trip to the Rocky Mountains. The hitch worked great with all four bikes on the rack!


Comments
Thanks for the follow up email. You picked a great time to check in since the hitch has been great and we just used it to load up 3 mountain bikes for a trip to the mountains. It worked great in the winter to hitch up a ski rack. It looks great and I like the added assurance from the support strap.Thanks!
C13119 - 08/17/2015


by:
2012 Honda CR-V

This is my second Kurt hitch I’ve installed . I did both by myself with no problem ! I went from a class one to a class III hitch . That’s why did it twice. Great product.


Comments
Just fine
Jim M - 05/09/2021


by:

I ordered a receiver hitch and a ball mount for my car, and they arrived a little earlier than expected which was wonderful! The pieces were intact and I’m having a buddy of mine help me with installation. (Be sure when you order that you have a friend who can help- most places won’t install a hitch they don’t sell onto your car for liability reasons. Just a heads up!) Overall, excellent!




by:

Great product - solid and great value for the price. I have CURT hitch receivers on both of my SUV's. I currently use them to carry mountain bikes. The bikes and carrier probably total 120-140 lbs. My parents plan to use this hitch to tow a small camping trailer.




by:
Ford Edge

Another great hitch. Shipping was on-time and the hitch was exactly what I ordered. Finish was even but there was slight damage probably in shipping but it looked like it was struck with a ball-peen hammer. A little filing and some spray paint and it was good to go. Instructions were clear and the cutting of the plastic body panel on the underside was much easier than I thought. Definitely measure and use a straight edge when cutting. Dremel with a rotary cutter worked great. Cutting the insulation was simple, really good shears made easy work of it. Prior to mounting run the bolts all the way in and out a few times to clear any debris from the threads you can't get with the brush. Getting the exhaust clear is a little challenging but manageable. I installed the hitch by myself and it went smoothly. Total time was about 90 minutes. I spent a lot of time on the measuring and also added a rubber barrier around the hole I cut. Very pleased with the fit and look of the finished hitch.


Comments
Love the hitch. 3rd product I have purchased from Etrailer and they have never let me down.
Kraig S - 08/11/2017


by:
2014 Honda CR-V

This is my first order from etrailer.com and would highly recommend the company. Great prices, fast shipping, and quality products. I ordered the Curt Trailer Hitch for our 2014 Honda CRV so we can use it with a bike rack and cargo carrier. It was a fast, easy, straight forward install and the hitch is a quality product with a good looking result when installed.




by:
2015 Honda CR-V

I ordered the Curt C13119 hitch in October when I decided to buy a 2015 CRV Touring model. I must have ordered it at the right time of day, I received the hitch the next afternoon. However, I ended up having to order my CRV. I had the hitch for three months before I could install it.

I left the plastic panel in place and cut the hole with a utility knife. I started with just cutting three sides to make a flap rather than a whole. I wanted to replace as much of the cutout as I could after the install. Bending the flap to 90 degrees, I had enough room to work. After the hitch was in place, I cut a smaller piece from the flap to fit around the hitch. I then used JB KwikWeld to glue the flap in place.

The hardest part for me wast getting the bolt directly above the muffler torqued down in the limited space. Thank you for the videos showing the installation. It made the process easier to watch it happen first.

The quality of the Curt hitch is excellent, well made with thick paint. Much better than the U-Haul hitch I had on my last vehicle.

I have referred several people to use eTrailer.com based on my experice with their website and products.


Comments
Could you tell me where you found the wiring harness hookup on your 2015. Was it behind the drivers side rear panel? Thanks in advance.
-- comment by: Caroline - 05/07/2015


by:
DeLorean

Unknown to the ETrailer Team I had spent a large portion of my career training high performing teams worldwide. Throughout America, Australia and Abu Dhabi. Seriously they hit and exceeded my expectations at every juncture point of the process, delivery and follow up.
Well Done, the hitch installed exactly as described with No Surprises. Well the one surprise was that it was delivered days earlier than expected.
I have recommended them to family already and will do so again and again. I don’t need a hitch for our DeLorean but if I did I am sure they could make it happen.
Well Done and Thank You Very Much,
Ron Stewart


Comments
A year later, we live near the ocean and absolutely no signs of rust. Well Done. Anyone who lives near salt water can really appreciate this, Thank You
Ronald - 01/21/2022


by:
2014 Honda CR-V

Trailer arrived fine, except there where two gouges where paint was flaking off. Fortunately I had some gray primer and black spray paint which I used to cover the chips. They were on opposite sides of the trailer. The box was in good shape so not sure where it happened. The instructions were very clear and the hitch fit like it was supposed to. All the holes lined up just fine and the videos on line were very helpful. I would have given this product one more mark closer to Excellent except that one thing that I didn't like at all was the way the paint crinkled at the spot where the u shaped bolt gets bolted on with the provided nuts. I was tightening the hitch to the u shaped bolt and as the nuts tightened against the painted hitch I could actually hear and see the paint crinkle. It was as if the paint coat wasn't adhering to the metal. If it had adhered properly, I would have just expected the bolts to scrape some of the paint away not cause it to crinkle. So I took my black can of spay paint and coated the area really well to protect against corrosion. Here in Florida, that is a big problem.


Comments
I had the same issue with the u bolt nuts. is the paint supposed to crack like this?
-- comment by: Brian W - 10/02/2014



by:

Excellent product, easy fit, instructions very clear and easy to follow; highly recommended.




by:

It fits well in my 2016 Honda CRV. It is better with 2 people to do the installation.




by:

Installation of the hitch was quick and easy, everything lined up perfectly. It does a good job supporting our bicycle carrier rack.




by:

Good price, prompt delivery. I was particularly impressed with the installation instructions that included a diagram where and how to cut a hole in a plastic panel to allow the hitch bracket to reach the car frame. Everything fit perfectly as expected.




by:
2013 Honda CR-V

Installation was very easy. Hardest part was the rubber hangers on the muffler. Decided to cut the rear panel with a rotozip instead of removing it, so I took my time measuring. I used a floor jack with a piece of wood and had my wife stabilize it. After cutting the hole, everything went smoothly. Place the bolts, tighten and torque them and your done. The videos were really helpful. Total time about 1 hour. Price and service from E-Trailer were outstanding.


Comments
I removed the appearance panel, so that I would not slip and cut any wires above it that I could not see-now that I have done it that way, I discovered there is nothing to injure if you cut the piece in place on the car....the landmarks are obvious for marking the cut out, and a sheet rock knife does a quick easy cutout...my muffler hangers came off with moderate encouragement, and slipped back on with a squirt of silicone spray...all in all, a quick and easy install...oh, if you do it with one person, it is easiest to have a floor jack to raise and hold the hitch in place while you mount the bolts...etrailer is a great company to do business with....Mel
-- comment by: Mel - 10/13/2013

Everything works perfectly.
Mark A - 02/20/2015


by:
2012 Honda CR-V

While I have not i stalled the hitch yet, I can see that it the same quality I have come to expect from Curt hitches.




by:
2014 Honda CR-V

My husband said the hitch was extremely easy to attach to my CRV! I am so glad I also purchased the Thule Helium Aero Bike Hitch. I'm sending a picture in a separate email following this one. Thanks again for the ease in dealing with etrailer and for the quick deliveries!!


Comments
Thanks for checking back. I still love it! It has been perfect for the bike rack we purchased.
Elaine - 05/05/2015


by:

The folks at etrailer handled a return/swap very efficiently, the replacement was a good fit. Good instructions. All good.



25
764
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Visibility of the Curt Trailer Hitch C13119 on a 2012 Honda CR-V
    We do have a photo of the Curt Hitch, part # C13119, on a 2012 Honda CR-V and I have posted it on the page. The most visible part will be the receiver opening and the front of the round crossbar. I have also linked the installation detail for this hitch.
    view full answer...
    Image 1 for
  • How To Trim Underbody Panel on 2013 Honda CR-V For Installation of Curt Trailer Hitch # C13119
    To trim the underbody panel on your 2013 Honda CR-V for the installation of a Curt Trailer Hitch Receiver # C13119, I recommend marking the area that needs to be cut to start with. I have provided a graphic showing where this section is and the dimensions of the area that needs to be removed. I would then use the saw attachment for a rotary tool to cut the section from the underbody panel. I have provided a link to the instructions for this trailer hitch which provides you the types of...
    view full answer...
    Image 1 for
  • How to Correct Rust on Trailer Hitch
    The protective black powder coat finish on a Curt or Draw-Tite hitch like # C13119 does eventually break down from exposure but this is not considered a warranty issue. This normal wear and tear can best be addressed by applying a new layer of rust-inhibiting spray paint, such as Rust-O-Leum brand or a similar product you can find at any local hardware or paint store. Sanding off the rusted areas before applying the paint is recommended. The linked article includes information on hitch...
    view full answer...
  • Can Trim Panel be Removed Instead of Trimmed to Install Trailer Hitch on a 2016 Honda CR-V
    If you want to remove the trim panel on your 2016 Honda CR-V to install Curt trailer hitch # C13119 instead of trimming it you certainly can. Everything above that panel will then be exposed more to the elements so keep that in mind.
    view full answer...
  • Can Underbody Panel be Trimmed without Removing for Hitch Install on a 2016 Honda CR-V
    Removing the panel on the 2016 Honda CR-V allows for easier access and installation of trailer hitch # C13119 but if you can install it by just trimming that panel AND if the panel can still be secured properly to the vehicle then yes you could just trim it. But I would not recommend trimming it while still on the vehicle because there is always a risk, even if a small risk, of accidently cutting something behind that panel so it is best to take it off, trim it, and put it back on.
    view full answer...
  • Customer Tips On Trailer Hitch Installation on a 2014 Honda CR-V
    Thank you for sharing the tips for installing Curt trailer hitch # C13119 on your 2014 Honda CR-V. I know that many people prefer to leave the panel in place if at all possible. Provided that there is nothing on the other side of the panel that could get damaged it is certainly feasible to mask then cut with the panel in place like you have done. But on the other hand if you do not want to be our your back any longer than you have to then removing the panel to go trim it may be a nice...
    view full answer...
  • Torque Specifications for Installing Curt Class III Trailer Hitch on 2015 Honda CR-V
    When installing the Curt Class III Trailer HItch Receiver # C13119 on your 2015 Honda CR-V, you will insert a 7/16 inch U-bolt through the tow hook. After raising the hitch into position, you will secure it using 7/16 inch flange nuts to the U-bolt and 10mm bolts with 7/16 inch conical toothed washers to the weldnuts in the frame rails. You will torque all 7/16 inch hardware to 50 ft-lbs and all 10mm hardware to 48 ft-lbs. I have also attached an installation video on your 2015 CR-V that...
    view full answer...
  • Solution for Trailer Hitch Install Hardware that Seems to Big to Thread Into Vehicle Weldnut
    The problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are too small. I checked your order notes and you're up north where the winters are pretty harsh too so that makes this even more likely. What you'll need to do it clean the weld nuts out so that you can thread the included bolts. I have included...
    view full answer...
    Image 1 for
  • Will Adding Trailer Hitch Negatively Affect Steering, Braking, or Gas Mileage of 2014 Honda CR-V
    The Curt trailer hitch # C13119 weighs about 30 pounds or so. Its affect on gas mileage would basically be non-existent. You would never notice a change. The way a person drives would have more of an effect than adding a little weight to the vehicle so no worries there. Also, given that the hitch is relatively light it isn't going to affect the handling of the vehicle at all. The weight of the hitch is not going to compress the rear suspension so the handling, braking, steering, everything,...
    view full answer...
  • Bolt Torque Specs for Installing Curt Trailer Hitch Receiver # C13119 on 2012 Honda CR-V
    The torque specs for the U-bolts are listed in the installation instructions for the Curt Hitch # C13119. I have attached a link to these for you. Since these figures are subject to change and the installation instructions will always be up to date, directing you to the instructions link is the best way to obtain the most current information. I have also attached an installation video for you to check out as well.
    view full answer...
  • Recommended Trailer Hitch for 2014 Honda CR-V
    For your 2014 Honda CR-V I highly recommend the Curt Class III Trailer Hitch Receiver # C13119 for a couple of reasons. All of the Class III custom hitches (I recommend going with a Class III not only for the extra capacity but for the larger 2" receiver opening that opens the door to a lot more accessory options like bike racks, etc) have a very similar design and are going to line up to the same factory holes in the frame rails for a simple bolt-on installation. The Curt hitch however,...
    view full answer...
    Image 1 for Image 2 for
  • What Trimming is Required to Install Curt Hitch C13119 On 2016 Honda CR-V
    The Curt Trailer Hitch Receiver part # C13119 which is a fit for a 2016 Honda CR-V does require that you modify the a lower splash shield. I have attached a photo of what is required for you as well. That said, this will be unavoidable as all trailer hitches for this vehicle require this since the shield covers the mounting holes for the trailer hitch. In regards to a cover, this won't be needed as the potential for dirt to get underneath the panel is low nor would it cause any harm if...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2016 Honda CR-V
    For your 2016 Honda CR-V the Curt hitch part # C13119 is a confirmed fit and would be a great option that I recommend. It has plenty of towing capacity, is the more popular 2 inch size, and has the highest quality powdercoat finish to prevent corrosion. I attached an install video for this for you to check out as well.
    view full answer...
  • What Vehicles Does Curt Trailer Hitch # C13119 Fit
    The Curt hitch part # C13119 that you referenced fits 2012-2016 Honda CR-Vs. It does not fit anything else.
    view full answer...
  • Does Underbody Appearance Have To Be Removed When Installing Trailer Hitch On 2015 Honda CR-V
    You are correct. As you can see by the attached installation video, our installer said you can leave the panel in place and trim it when you install the hitch like part # C13119. The installer uses a razor knife to accomplish this. The manufacturers do instruct the installer to remove the appearance panel and use a rotary tool, but it can be trimmed in place without removing.
    view full answer...
  • Will Re-Threading My Frame Bolt Holes On My 2014 Honda CR-V Still Allow My Hitch To Fit?
    As long as the new threads you tap for your hitch match the thread of the bolts, then you will have no issues. For instance, if you had the Curt Trailer Hitch Receiver # C13119, then you'd just need to tap your frame holes to match the M10x1.25 bolts, and you'll be good to go! Attached is an installation video of # C13119 for you to check out as well.
    view full answer...
  • Will the Curt Trailer Hitch Support Strap Work on a 2012 Honda CR-V
    The recommended strap connection point for the Curt Support Strap, part # 18050, is at the bottom of your tailgate on your 2012 Honda CR-V. You can simply wrap the strap around your bike rack then insert the hook facing up into the bottom lip of the hatch and then tighten the strap so the bike rack is being pulled to the rear of the vehicle.
    view full answer...
  • Can a Bike Rack Be Used with a Curt Class III Trailer Hitch on a 2012 Honda CR-V
    The Curt trailer hitch # C13119 has a 2 inch trailer hitch receiver. It will accept a bike rack that has a 2 inch shank. Some racks also have an adapter to allow a 1-1/4 inch shank to fit a 2 inch receiver. If your bike rack fits this description it will physically fit in the trailer hitch. Based on the images in the instructions for the hitch and the video I have linked for you, it does not appear that there will be clearance issues with the rear of the vehicle and the bike rack. If you...
    view full answer...
  • Recommendation For Trailer Hitch For 2014 Honda CR-V
    We do carry hitches that would be a fit for your 2014 Honda CRV. I recommend the Curt Trailer Hitch, part # C13119. This is a Class lll trailer hitch with a 2 inch receiver opening. I have attached a link to an installation video of this hitch on a 2014 Honda CR-V. The numbers you see for the weight capacity of a trailer hitch are not based on the vehicle they are installed on. They are based on the strength of the hitch alone. Although many times a hitch may have a rating of several...
    view full answer...
  • Where are Draw-Tite Trailer Hitch Receivers Manufactured 2013 Honda CR-V
    All of the Draw-Tite trailer hitch receivers are made and manufactured in Mexico. For a trailer hitch receiver made and manufactured in the U.S.A. you would want to use a Curt hitch. The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75742 is a confirmed fit for your 2013 Honda CR-V. For a Curt hitch that also fits your 2013 Honda CR-V, I reccomend using the Curt Trailer Hitch Receiver part # C13119. I have attached an installation video of each hitch installed on a similar 2013 Honda...
    view full answer...
  • Hitch Hardware Recommendation for Installing Curt Hitch C13119 on New Vehicle
    We have just what you need. Hitch install hardware is actually considered one-time-use. So you are doing the right thing by getting new hardware. The part number you need is # RHK. You will need to enter the part number # C13119 on the product page and then select Curt from the drop down menu and we will ship you out the correct parts.
    view full answer...
  • Will the Curt # 13555 Trailer Hitch fit a 2012 Honda CR-V
    We have a hitch fit for the 2012 Honda CR-V. However, the Curt Hitch, # 13555, is not the correct hitch for the 2012 CR-V. This hitch fits one CR-V year models from 2007-2011. The Curt Trailer Hitch # C13119 is the confirmed fit for the 2012 Honda CR-V. This hitch is a Class III rate hitch that includes the 2x2 inch hitch receiver opening. This hitch is designed to custom-fit the 2012 Honda CR-V and does not require any drilling during installation. The attached video shows the installation...
    view full answer...
  • Does the Rear Appearance Panel of a 2014 Honda CR-V Have to be Removed to Install Hitch
    There are two options you have when installing the Draw-Tite Max-Frame Trailer Hitch # 75742 like you have noticed. You can trim the panel and reinstall it or you can simply remove it. I wish the installers had decided to trim the panel and reinstall it but the customer who owned the vehicle may have requested them not reinstall it. I would say that the best way to do it would be to trim and reinstall the panel, which the installation instructions I attached to the right do detail how...
    view full answer...
  • Getting New Hardware for Curt Trailer Hitch Recommendation
    Since trailer hitch hardware is considered one-time-use you would need to replace all of the hardware of the hitch when installing it in a new vehicle. We have the part # RHK for that. Enter the part number and select Curt on the product page and we will ship you out new hardware.
    view full answer...


< Previous
123. . .6



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Patrick B
Test Fit:
Patrick B
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Kathleen M
Video Edited:
Kathleen M
Employee Sue W
Video Edited:
Sue W
Employee Andrew L
Video by:
Andrew L
Employee Alan C
Video by:
Alan C
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.