bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13130
Retail:$275.43
Our Price: $175.76
You Save: $99.67
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 28 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13130 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (351)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13130

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 600 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
    • Maximum tongue weight: 600 lbs
    • Not intended for use with weight-distribution systems
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13130 CURT Class 3 Trailer Hitch Receiver

Installation Details C13130 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13130

Average Customer Rating:  4.8 out of 5 stars   (351 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

The product made in the USA- Great!
I'm
buying this product primarily Made in USA.
But the processed sent to customer completely destroying the product Made in USA.
No quality control during packaging at the warehouse to customer(s). Scratches and permeate dents to peeling of the original paint and coding.
If I was the owner, I would fired the person in charging the quality product that Made in USA to customer with great care.
Remembering this- it is heavy, no additional styrofoam nor any bubbles wrap, etc. just the hitch in a box- that's all during shipment. Puncture the box due to heavy hitch inside.



by:
2015 Acura RDX

The Acura dealership charges $750 for a trailer hitch installed. I was hesitant to buy my own hitch for installation because I thought something that expensive must be really hard to do. NOT AT ALL! Thank-you etrailer.com for the video that gave me the confidence to install this on my 2015 RDX. Written Instructions were easy to follow. Took about 30 minutes to unbox, install, and breakdown the box it was shipped in. Once installed, this hitch is almost undetectable (looks great). I am a 42-year-old woman and did need my husband’s help to hold the hitch in place while I tightened the bolts. I purchased this hitch for use with a bike rack and it looks and works great!!

Toni

3/26/2019

A year later and I have no update other than to say all is well and works just as great as the day I installed it! Only smiles here...no regrets on this purchase!



by:
2017 Acura RDX

Received my hitch in less than a week. One end had broken thru the box but there was no damage. This is a really nice quality product.
Installation tips. Get the back of the car high. I used my ramps. The hitch has to be rotated up into place. A little awkward for one person so I had my son help. Took about 5 minutes to install.
I'm pleased.

Rich D.

6/27/2018

Now that I’ve had the opportunity to use my hitch I do have a comment. Keep in mind that my comments most likely apply only to my vehicle, a 2017 Acura RDX. The hitch sits low and too far forward. It was almost impossible to install the hitch pin without laying on the ground under the back of the car. I believe it is designed that way to make the hitch less visually intrusive. Also if it were higher, the rear valance on the car may have to be cut. I bought a hitch extender which also lifted the receiver a few inches. This works out much better.

Etrailer Expert

Rachael H.

6/27/2018

Thanks for the follow up Rich, I did want to let you know that most hitch extenders do reduce the towing capacity of the hitch by up to 50 percent.


by:

The hitch is perfect for our bike rack to use on my Acura RDX.
My Husband installed it himself (he is very resourceful).
Definitely would recommend.



by:
2013 Acura RDX

Prefect fit and Solid heavy built, comes with required nuts and bolts and precise instructions. Was able to install myself with the instruction videos provided on the website. Had tough time cleaning the rust from the frame screw holes. Would strongly recommend the additional tools and accessories suggested on the website, these included the rust cleaning brush and liquid.

Sathyanarayan

7/24/2021

Going great as anticipated.



by:

Installation is Pretty straight forward, took me about 20-25 mins installing, i would imagine it will be a lot quicker to install with an extra set of hands but otherwise really happy with the result, very low profile no crazy brand names visible like the one they install at u-haul. Yup would definitely recommend



by:

Easy,one-person installl once you figure out how to get and keep,it in place whilst lying on your back -yes, it can be done. The lighting harness was a simple fit, but I did have to add the fuse. I hauled a uhaul trailer on a 2000 mile round trip, no problems.

John

3/26/2023

Great. Getting a trailer from UHaul every so often to haul trash, green waste and furniture, and having a comfortable SUV is the way to go rather than a big pickup! Easy install.



by:

Extremely disappointed in what I received. This brand new Curt hitch was "packaged up damaged" in multiple areas and sold as "new." A small portion of the damage is from freight mishandling but shame on Etrailer for letting this out the door in this condition and selling it as "new."

Etrailer Expert

Brooke M.

10/12/2021

Thank you for leaving a review! It is not our policy to ship damaged items. Our customer service team should be reaching out to you in the near future.



by:
2013 Acura RDX

Acura RDX 2013 -hitch self install ~45 minutes

1) Make sure you have the 19mm socket , extender 6" or longer adapter and calibrated torque wrench. The location of the bolts is a bit finicky in the rdx and these tools help a ton if you are doing it by yourself

2) Especially if you are doing it yourself get some zip ties very long ones from home depot to hold the hitch in place temporarily (double the zip ties at each location so it doesn't snap). This thing is quite heavy and suggest you do it carefully and take the time to gently raise the hitch with some support boxes (have to do it at an angle and slide the hitch into place to align with the bolt holes due to the bumper on the way). Some have mentioned to bend the bumper , but I did not do that. raising the hitch carefully at an angle and sliding into place to align with the bolt terminals then zip tie and start to secure with the supplied bolts

3) And oh the washer has a teeths which needs to face towards the hitch .THIS is IMPORTANT

Overall looks excellent very clean finish , I am curious to know how corrosion resistant the assembly is over time ...
Thanks to folks at etrailer for excellent communication and the website layout is helpful to find recommendations and accessories



by:
Acura RDX

I got the hitch, watched a quick video of the install and within 30 minutes had it installed. Fortunately the Accura RDX I installed it on was set up for a direct install with nut-plates and access holes available. The position of the hitch is nicely concealed below the bumper.

Martin

2/6/2023

Solid as a rock. Has worked well for all my needs and is recessed from view and is conveniently in the shadow of my vehicle, a 2017 Acura RDX



by:
2016 Acura RDX

Perfect fit for my 2016 Acura RDX. I was able to install it in my garage with the wheels on the garage floor using the recommended tools and safety gear (safety glasses and gloves). Perfect for my bike rack.

David

1/3/2023

No problems after a year of use. I only use it for my bike rack, which can hold 4 bikes. I typically carry only one, but have carried 3 on occasion. So, I havent tested its class III capacity in any way yet, but Im very happy with it.



by:
2016 Acura RDX

The Curt Trailer Hitch Receiver for my 2016 Acura RDX arrived in excellent condition and was quite easy to install. The instructions that came with the Receiver were easy to follow but I did have a problem. The handle nut stripped out while tightening torque specs. I have a Craftsman Commercial Micro Adjusting Torque Control Wrench. I called eTrailer and they assured me that the torque specifications in the instructions were correct. Based on their assurance, I can only conclude that my torque control wrench is not calibrated correctly and the Curt Trailer Hitch Receiver deserves 5 stars.



by:
2015 Acura RDX

Perfect fit for my 2015 RDX. Excellent packing and quality product. Installed easily thanks to instructions and video. Only issue was tack weld securing nut to handle was defective. One was not lined up properly to allow bolt to enter and the other just fell off. This required a little MacGyvering with a glue gun and additional lock washer.



by:

Works like a charm, fits like a glove



by:
2015 Acura RDX

Not enough stars to rate. I needed the hitch by end of the week. Ordered it on Monday and it came on Wednesday. Super fast, instructions super clear, and all items needed were there. If I ever need hitch and accessories, I will not hesitate to use etrailer. Fantastic!



by:
2015 Acura RDX

Heavy-duty solidly built bike hitch. Holes lined up just right to frame of my SUV (2015 RDX). Took me (a senior) about 35 mins to install, I just followed instruction sheet and UTube video. Now I just have to decide on a bike carrier.



by:

Product installed perfectly!
Installation
instructions were very clear.
Wished I had ordered the accompanying wiring harness and hitch cover.



by:
2014 Acura RDX

Perfect fit. Tech who installed it complimented you on good design and ease of installation. Bike rack fits perfectly.



by:

I ordered a hitch from this online outlet after the one a local [online] reserved for me turned up "missing" somehow and I had less than a week to get on the road. When I called to place my order I was helped by an actual human being with a friendly demeanor---and native English-speaking skills (imagine that!). My order arrived just three days later and the [online] folks actually installed it for free. After the original snafu I was able to move from New England to Georgia on schedule because of etrailer---many thanks!



by:
2014 Acura RDX

Appears to be a solid product after a few days of use. I had it installed by a mechanic due to lack of proper tools, but the installation was as easy as described in the documentation. Well built, does the job and looks nice too.



by:
Acura RDX

Just leased new Acura RDX and wanted to install a hitch and bike rack. E=Trailer's web site and customer service (Christine) were top notch. I loved the personal attention and the You Tube videos on how to install the hitch. It took me about an hour but I was able to get underneath the car and follow the instructions. The handle nuts are the key to holding this hitch in place. It helps to bend them for easier access. Once you do that, it's a snap.

Dino K.

9/14/2016

I stand by my original review. Still enjoying the hitch and bike rack. Thanks for checking in.



by:
2016 Acura RDX

Easy installation! I watched the etrailer video and it took me 25 minutes to get installed and torqued down. Perfect fit and looks great.

Rob C.

10/2/2022

Works just like its supposed to. No problems, no complaints.



by:

Easy to install once the RDX factory mount point threads were cleaned up. Very happy with the product.

Bryan

11/30/2022

After a year weve had zero issues with the product or my DIY install! Cant complain, good product



by:
2014 Acura RDX

Products came in a timely manner and the videos associated with each product explained everything. The videos and paperwork made the installation a breeze!



by:
2015 Acura RDX

I found the bike trailer hitch I needed etrailer after getting a ridiculous quote from a local Honda dealer ($800 for purchase and install !) After reviewing the installation instructions, decided this was DIY project I could handle and save hundreds of dollars. The product arrived exactly as advertised. With the assist of my sons, was able to get it installed in about 30 minutes. My wife said looks like a pro did it! Tested out the bike rack that I purchased, it fits up perfectly. I highly recommend the etrailer bike hitch and they will be my goto vendor for this type of product in the future.

Patrick

6/6/2020

ROI on this product has been incredible. I puchased a Thule bike rack after installing the hitch, its so simple to utilize the hitch. The hitch still looks great, my wife says she doesnt even notice it on back of car. Thanks again!


25
376
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Boat Trailer Coupler Became Disconnected from Ball on 2014 Acura RDX
    Check the trailer coupler to see if it is meant to take a 2-5/16 inch ball. If so then the 2 inch ball you have will not be large enough and this issue could keep happening. If it does take a 2 inch ball then either the coupler was not fully secured or something needs to be adjusted with the coupler. Most couplers will have a nut to tighten or loosen that is accessible on the bottom. On some vehicles there is a specific distance the ball has to be from the rear axle of the tow vehicle....
    view full answer...
  • Compatibility of 1/2 Inch Bolts with Handle Nuts Used to Install Curt # C13130 on 2013 Acura RDX
    I spoke with my contact at Curt Manufacturing, who confirms that the 12M bolt are indeed intended to fit the weldnuts, and the 1/2 inch bolts are a fit for the handle nuts. My contact suggested that you closely examine the threads on the inside of the handle nuts to make sure they're not damaged, same with the bolts. Try threading the bolts into the handle nuts before you put the handle nuts up into the frame to confirm fit, try both nuts with both bolts. When the handle nuts are up inside...
    view full answer...
  • Recommended Trailer Hitch with Hidden Crossbar for 2017 Acura RDX
    The Curt Trailer Hitch Receiver # C13130 referenced in your question is a great choice. This Class III trailer hitch will indeed have a nice hidden crossbar design once mounted under your vehicle. No vehicle alterations, such as fascia trimming, are required during installation. The receiver tube will rest nicely under the rear fascia and bumper of your Acura RDX. I have attached an image that shows the hitch installed on the 2015 Acura RDX, which will be the same on your 2017 model.
    view full answer...
    Image 1 for
  • Bolts Won't Thread on Curt Hitch of 2017 Acura RDX
    I do have suggestions if the bolts won't thread when installing the Curt Trailer Hitch Receiver # C13130 on your 2017 Acura RDX. What you can do is use a thread tap, a size M12 x 1.25 to fit the same size bolts.
    view full answer...
  • Does Installing a Hitch on a 2015 Acura RDX Automatically Void Vehicle Warranty
    Installing a hitch on your 2015 Acura RDX will not have any warranty implications if the hitch is installed as outlined in the instructions and used within the weight bearing capabilities of the vehicle. Consumers of aftermarket products are protected by the Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually...
    view full answer...
  • Replacement Hitch Hardware Kit for Curt Hitch C13130 for 2017 Acura RDX
    The hitch you purchased is Curt # C13130. This hitch fits the Acura RDX for model years 2013 through 2017 so you can re-install it on the newer vehicle. Hitch hardware can be used only one time so to mount this hitch on the 2017 RDX you will need our Replacement Hardware Kit # RHK. Simply enter that item in our search box and then select the Curt brand and part C13130. The hardware kit will include everything needed to mount the hitch on the RDX.
    view full answer...
  • Trailer Hitch that Fits 2019 Acura RDX
    The Curt hitch part # C13130 does not fit the 2019 Acura RDX. For a hitch we do know is a fit for the 2019 RDX we have the Draw Tite part # 76268 which is also a Class III hitch with a 2 inch opening. There was some confusion at one point and the Curt was thought to be a fit for the 2019 model but now we know it does not fit.
    view full answer...
  • Trailer Hitch for 2016 Acura RDX for Use with Thule T2 Platform Rack and Pedego Bikes
    All three of the 2-inch hitches we offer for your 2016 Acura RDX, one of which is the Curt # C13130, will mount to the same points on your RDX. All will be in essentially the same position at the rear of the car, with the hitch pin hole about 3-1/2-inches from the rear edge of the bumper. Of the three hitch options I suggest the Draw-Tite # 75784 since it is the lowest-cost hitch and since it does not require you to use a stabilizing strap which is required for the Curt hitch. Your Thule...
    view full answer...
  • What is the Stabilizer Strap that Curt Recommends Get Used with Their Hitches
    A stabilizer strap will attach to the hitch accessory and then attach to the vehicle to provide support for the accessory to help prevent some of the shock from bumps from being transferred to the hitch. The Curt Strap part # 18050 is one that is most often used. I attached a demo video that shows how to use this product for you to check out.
    view full answer...
  • Do I Still Need to Use the Stabilizer Straps on my Curt Hitch When Carrying a Bike Rack
    Stabilizer straps are no longer required when using a Curt hitch like the # C13130; this was an older requirement for some Curt hitches when using a bike rack only, but they have since determined that it is not required or recommended any longer. You could also use the Draw- Tite # 75784, which the main difference is that the receiver is about 1-1/2" shorter, so it's not as ideal for bike racks since the clearance from the vehicle will be minimal. I've linked an installation video of the...
    view full answer...
  • Replacement Hardware for Curt Trailer Hitch Receiver
    The replacement hardware you're looking for is # RHK. When ordering you'll need to specify that you have the Curt Hitch Receiver # C13130.
    view full answer...
  • Which Curt Trailer Hitch Fits 2017 Acura MDX
    We have a very similar Curt hitch that does fit your 2017 Acura MDX with the part # C13146 but the one you referenced is not a fit so it would not be the hitch to go with. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • How to Determine Correct Trailer Wiring Harness for 2020 Acura RDX
    In order to determine the correct trailer wiring harness for your 2020 Acura RDX - the option for +12-Volt Power Provision or without - you can check out the 8-pin connector on the driver's side interior trim panel, like in the accompanying photo. To see how to access this you can take a look below at the linked installation instructions. Once you see the 8-pin connector, check to see the number of red wires going INTO the connector. - Two Red Wires - With +12-Volt Power Provision: T-One...
    view full answer...
    Image 1 for
  • Curt Class lll Trailer Hitch and SportRack 3 Bike carrier for 2013 Acura RDX
    The Curt Trailer Hitch Receiver, part # C13130, is a fit for your Acura RDX. The hitch has a 2 inch by 2 inch receiver opening and has a tongue capacity of 600 lbs. Please note that this hitch has a gross trailer weight maximum of 4000 lbs and and a tongue weight capacity of 600 lbs. This hitch is not designed to be used with a weight distribution system. The SportRack 3 Bike Carrier, part # SR2403 measures 12-1/4 inches from the center of the hitch pin hole to the back of the upright...
    view full answer...
  • Hitch Capacities for a Curt Hitch on a 2013 Acura RDX
    The Curt Class III hitch that has been confirmed as a fit for your 2013 Acura RDX is the part # C13130 that you referenced. The capacities for the hitch are 4,000 lbs total trailer weight and 600 lbs total tongue weight. You should note that in a towing setup you are only as strong as the weakest component. You will need to check the owners manual of your vehicle to determine what Acura recommends as the overall capacity for your vehicle and be sure to go by the lower of the two figures...
    view full answer...
  • Trailer Hitch Recommendation for a 2015 Acura RDX
    All of the Class III hitches we carry for the 2015 Acura RDX will be pretty low profile. Basically all you would see is the hitch opening right underneath you rear bumper. The most popular option we carry is the Curt hitch part # C13130. This hitch has a 600 lb tongue weight rating and a 4,000 lb total trailer weight rating so it should do a great job for towing your trailer. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with...
    view full answer...
  • Does Curt Trailer Hitch Receiver Fit 2017 Acura RDX
    Yes it does! The Curt Trailer Hitch Receiver # C13130 will absolutely fit your 2017 Acura RDX. In fact, the accompanying photos show this hitch on a '17 RDX. This is a simple, bolt-on installation that doesn't require any drilling or fascia/bumper cutting of any kind; all you have to do is lift the hitch into place and bolt it on. I have added a link to a video install on a 2017 Acura RDX for you to check out as well of the Curt Trailer Hitch Receiver # C13130. If you are looking to...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch Recommendation for 2013 Acura RDX Towing 1750 LB Fishing Boat
    I have included a link to the hitch options that we offer for your 2013 Acura RDX. The hitch that I recommend for your 2013 Acura RDX is the Curt Class III Trailer Hitch Receiver, # C13130. This is a custom fit hitch so there is no drilling or welding required for installation and it has a towing capacity of 4,000 lbs and tongue weight capacity of 600 lbs. Although the hitch has a 4,000 lb capacity, I did some checking and it looks as though your RDX has a maximum towing capacity of 1,500...
    view full answer...
  • Trailer Hitch Recommendation for 2013 Acura RDX that Does Not Require Stabilizer Strap Bike Rack
    The Curt hitch part # C13130 that you referenced which is a fit for your 2013 Acura RDX does require the use of the stabilizer strap # 18050 when you carry a bike rack. Because of that I would recommend the Draw Tite Hitch part # 75784 that you mentioned since it doesn't have that same requirement. These hitches are made by different companies who have their own warranty requirements and rate them in-house. I wish there was a more logical way to explain the strap recommendation on a hitch...
    view full answer...
  • Does The Curt C13130 Hitch Fit A 2014 Acura RDX
    Yes, the Curt Trailer Hitch # C13130 does fit your 2014 Acura RDX. This hitch is capable of supporting a maximum GTW of 4,000lbs, and a maximum TW of 600lbs. If you're interested in a ball mount kit, I recommend the # C45036. This kit includes a ball mount with 0" of rise, and 2" of drop, along with a 2" ball and a hitch pin and clip. If you want to complete the set-up, you'll also need wiring. Trailer wiring will provide lights to your trailer so you can be in legal compliance and safe...
    view full answer...
  • Does Curt Trailer Hitch and Wiring Harness Fit 2018 Acura RDX
    I am happy to confirm you are on the money with the Curt trailer hitch receiver and trailer wiring harness that fit your 2018 Acura RDX: - Curt Trailer Hitch Receiver # C13130 - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 56008 Both of these items will fit your 2018 Acura RDX and will allow you to tow your boat as well as use a bike rack. The Curt Towing Starter Kit for 2" Hitches # C45534 may be the ball mount you need, but it depends on if its 3/4"...
    view full answer...
    Image 1 for
  • Best Trailer Hitch and Bike Rack for 2018 Acura RDX
    The best trailer hitch for your 2018 Acura RDX to carry a bike rack is the Curt # C13130 because it has clean look with a concealed cross tube and the highest tongue weight capacity among the hitches that fit your Acura, which speaks to the strength of the hitch. This Class III, 2" hitch is made in the USA and is a complete bolt-on installation that will not require any type of drilling into your car's frame. I have added a photo showing how the hitch looks when installed on a RDX as well...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch And Wiring For 2016 Acura RDX
    Yes, the Curt # C13130 does fit your 2016 Acura RDX. To tow a traier you also need a ball mount and hitch balls. I've linked our selection of ball mounts as well as an article to help you select the correct rise or drop you need. If you need trailer wiring, you will need part # 118569. I have attached a link to an installation video for this harness. I have attached links to some of the products we offer that may work for you. If you have any questions about a specific item let me...
    view full answer...
  • Does Curt Trailer Hitch For 2018 Acura RDX Require Spacer Blocks & Work With Yakima HoldUp Bike Rack
    Spacers are not needed in order to install the Curt Trailer Hitch Receiver # C13130 on your 2018 Acura RDX and the reason is Curt decided that the hitch would fit fine without them, even though it will push up against the underneath fascia a bit. This is in contrast to the Draw-Tite Trailer Hitch Receiver # 75784, which, like you pointed out, does require spacer blocks in order to ensure the hitch wasn't pushing up against that fascia. Both will work though, and there hasn't been any...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video by:
Joshua S
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.