bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class V
  4. 2 Inch Hitch
  5. 17000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"

Item # C15409
Our Price: $407.18
You Save: $196.77
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 79 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" part number C15409 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (43)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C15409

  • Class V
  • 2 Inch Hitch
  • 17000 lbs GTW
  • Visible Cross Tube
  • CURT
  • 2550 lbs TW
  • 17000 lbs WD GTW
  • 2550 lbs WD TW
  • Custom Fit Hitch

Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 17,000 lbs
      • Maximum GTW when used with weight distribution: 17,000 lbs
    • Maximum tongue weight: 2,550 lbs
      • Maximum TW when used with weight distribution: 2,550 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty- 2"

Installation Details C15409 Installation instructions

This Product Fits The Following Vehicles

Customer Satisfaction Score:

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" - C15409

Average Customer Rating:  4.7 out of 5 stars   (43 Customer Reviews)

Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

2008 Dodge Ram-Pickup

Took me about 25 or so minutes to install on my 08 Dodge 4x4. Except for the mounting bracket from the stock hitch receiver getting in the way of feeding the mounting bolts inside of the frame the install went smooth. The construction of this receiver makes it look like it belongs on a tank. I'm sure the bolts or truck frame will break before this thing does.

I can't believe how fast this thing shipped. It had to go across the country and still got to my house in 3 days !


Super heavy duty hitch bolted right up easily and does its job. The steel this is made from is twice as thick as the factory hitch.


Its a beast.
It hangs a little low
(to accommodate not having to remove the factory hitch) but that is fine in my situation since I am not doing any dedicated off roading with the truck. This hitch is a beast (which is why I choose this capacity): I've had our tandem axle dump trailer behind it with 4 yards of rock which is roughly about 14K or 15K lbs all in on the hitch and no sweat even though the truck and diesel for sure know its there. At that weight I run a solid hitch insert and maximum capacity ball. But it feels great knowing that now the truck has all the right capacities to haul that much.
I just didn't have the energy in me or time, to lift the truck bed to remove the original hitch or the desire to spend more for the torklift hitch which is much more tidy and tight. If function and price is more important than tidy and tight, then this hitch is a beast and a good buy.


I bought the hitch knowing it sat below the stock hitch. Going off the video it looked good. Don't know if I'm going to like it because of all the ground clearance lost because my pickup doesn't sit as high as the one on the video, even though they are both dodge pickups. Otherwise I think I would of given it a 5 star. Best advice measure your vehicle don't go off of their video. To see if you can live with that much ground clearance lost. If not find a stock replacement.

Etrailer Expert

Sierra K.


You are right. The measurement of clearance for your 2008 Dodge Ram Pickup will vary depending on what size tires are being used and the different years depicted in the videos. For example, in the video of the 2004 Dodge Ram Pickup, the clearance from the top of the receiver tube to level ground is approximately 19 inches. In the 2014 year video the clearance is approximately 20.25 inches. So it is good to be aware of this if you have an unlevel driveway or you are constantly on uneven terrain. A hitch that fits your 2008 Dodge Ram with factory hitch is the Item # BWHDRH25211 and this one does not sit beneath the stock hitch, however, it may require some drilling. Please note that this B&W hitch is designed for vehicles with a standard factory bumper and will only fit 8 foot bed models.


Installation was not the easiest because of the factory hitch removal but the product has been solid.

2003 Dodge Ram Pickup

Hitch arrived in a timely fashion. The box was damaged in shipping which is not unusual for things shipped to Alaska. Product was undamaged and all contents were accounted for.

Installation required the removal of some unused camper tie down brackets.It also required the removal of the after market receiver because of clearance issues. If it had been the factory receiver it would have not required removal.

Because if clearance issues at the rear of the frame rails the bolt heads would not fit through the openings. It required using a additional piece of wire in conjunction with the one provided to fish the rear most bolts through from the forward openings in the frame rails. After all of the bolts and washers were installed I lassoed the bolts with a piece of safety wire to keep them from inadvertantly being pushed back up into the frame rails during installation of the hitch since I was working alone and using a forklift to position the hitch. I did remove the spare tire prior to starting just to make access to everything easier. Fit and finish of the receiver are good.

Craig C.


It works great! Ive been using it for over a year now, and it works perfectly for my needs.


This is mounted on my 2003 Dodge/Cummins, 3/4 ton truck. The truck now has 107,000 miles, and 95,000 of them or more have been pulling heavy travel trailers. The factory hitch was showing sign of wear, so I bought the Curt.
The Curt class 5 hitch is much heavier and is going to work much better than the class 4 hitch that came with the truck when I ordered it new.
The only thing I don't like, is that because of the factory installed original hitch, which is actually the rear cross member of the Dodge truck, the Curt is designed to fit under the factory hitch, and you have to leave the factory hitch in place. It's not a big problem, it just look's sort of odd.
The tolerances on the Curt a much tighter fit, and a lot less slop than the factory hitch.

Larry C.


Thanks for the follow up.....The Curt hitch is working just fine....its a lot stronger than the original factory hitch. Ive towed about 10,000 miles with it so far, and no problems.

2011 Chevrolet Silverado 2500

This hitch sits far too low on my truck to be usable. It's only 11.5 inches from the ground and sits a whole 7" below the bumper, significantly reducing ground clearance and requiring use of an inverted drop hitch to tow any trailer sitting higher than 11.5 inches - basically all my heavy duty trailers. It's low enough to look ridiculous on a 2500 and my neighbors agree. I spoke with etrailer and they refused to return this hitch even though I had never towed with with. They consider a loosely bolted up hitch "used." They also refused to offer a discount on ordering a replacement hitch. On top of it all, the exact same hitch is $66 cheaper on other sites where returns would be no issue at all! Exceptionally disappointed!

Etrailer Expert

Heather A.


John,Thank you for your review. This hitch is designed to install below the OEM hitch on your Ram truck. The hitch does sit lower because it is under the factory hitch. According to Curt it is not a good idea to remove the factory hitch because it is welded to a cross member that is an important part of the vehicles frame structure.


Showed up fast and was an easy install, took about 40 minutes, and I'm a non-pro. Looking forward to putting it through the tow test.


It was great, just had to make One modi fication

2006 Dodge Ram Pickup

This ball mount has served it purpose well. I purchased a new travel trailer that is heavy enough to require a weight distribution hitch when using the factory installed Class III hitch on our Dodge RAM 2500. I decided to upgrade to a Class V hitch combined with this ball mount to take delivery of the TT in order to defer decisions about a WD hitch until the actual load conditions were known. The hour trip home with this setup worked very well. Once the trailer was outfitted I was able to determine the actual tongue weight of the loaded trailer and I decided to purchase an appropriately sized Reese Straight Line WD hitch. However, this ball mount comes in handy for moving the trailer short distances without hassling with the WD system. The purchase experience through was first rate.

2006 Dodge Ram Pickup

I put this on under my Dodge Ram stock class 3 hitch, although now after doing it, I wish I had removed the stock hitch which after I started I noticed it wouldnt have been hard, I heard it was part of the cross member but it is bolted in, so the new hitch would take it place, someone posted a picture of what both hitches together look like, you lose 4 inches by mounting this under the stock hitch,, I had to buy a new distribution hitch but after messing with new taller hitch I should have turned my old one over and tried that first,, problem is my driveway is dirt and not level all around I have to go to a parking lot to mess with it,, ( Shank I think the part is called),, so before you buy look at your dodge and see if your hitch is removable, if not this is a great hitch,,


Thank you for the fast free shipping. Orders need to be packaged better against damage ,my hitch is scraped up end to end so bad ill have to paint it again!

2004 Chevrolet Silverado 2500

I bought the the Curt hitch for my 2004 dodge 2500. It was delivered quickly. The install was quite easy. My truck was not on a hoist. The bolts were fished through the holes with ease and I had a friend help steady the hitch while I jacked it up underneath the truck and with a little jimmying around the OEM hitch, it slid into place perfectly. All the bolt holes lined up, thereby easing a major fear of mine. One piece of advice. I had a rolling jack. Made it very easy. Also, it may seem like it won't fit, but lift the back,( as in closest to cab) into place first and then jack up the front and slide into place. It took me about an hour. Very happy with Etrailer and Curt and would recommend either to anyone.


Solo installer, took about two hours total to install using floor jack and cribbing. Had minor alignment problems and the rear spacers (item no. 6) had to be turned 90 degrees from the way indicated on installation diagram to align with rear holes on bottom of frame rail. So had to fish both spacers out of frame rail over top of bumper beam and reinstall. This hitch will allow me to safely tow my toy hauler that has a hitch weight of 1450 pounds. OEM hitch rating was only 1200 pounds.

2011 Dodge Ram Pickup

this product is a HD hitch. i tow big boats, cars and trailers and this hitch has been great. so tough and solid. and the installation was soooo easy. took 1/2 hour in the driveway.
etrailer website had a great video to show how its done. they have been a great vendor!!

2005 Dodge Ram Pickup

I ordered a Curt trailer hitch for my 2005 Dodge Ram 2500 Diesel with a factory installed Class IV hitch. Everything was as advertised. I did find the instructions lacking in detail. In particular, the instructions did not mention the the bumper bracket nuts and bolts on both sides interfered with the installation. These bolts, which could not be removed due to the nuts being welded in place, required that the hitch be positioned about 3 inches to the rear and 1/2 inch below the truck frame and then slid forward to align the mounting bolts. other than that. the installation was pretty straight forward. The hitch itself is substantial and well built.

2006 Dodge Ram Pickup

I’ve had this hitch on my ram 2500 for a year now. My truck is lifted with big tires. This hitch keeps me from needing such a long drop hitch.


Can't say enough good about how fast it got here and the fit was great, all holes lined up, the wires supplied worked to get hidden bolts in place. It did take me a little longer than the chart said but finding tools was a part of that. The very next day I took my trailer on a 350 mile round trip to the Mulberry river in northern
Arkansas, sharp turns ruff roads and it worked great.

Scott M.


Still doing great, I also put a hitch on the front and it works great as well.


Product came in a timely matter. One hole needed to be drilled out(passenger side farthest to the rear bumper)??????. Not fun. Fishwire system is great. Almost lovely. Thankfully had a drill bit to fix manufacturing problem.


Tyra was very helpful and did a great job. I received my hitch today, a couple of days ahead of the projected date. I'm waiting for warmer weather to install it. I won't know about the hitch installation until then. I've ordered here before and the other products were top notch as was the customer service.



It arrived early. Very pleased.

2010 Dodge Ram Pickup

Perfect fit...the fish wire made the installation very easy.


Great customer service, shipped quickly , easy installation, perfect fit, would recommend.

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Should Factory Trailer Hitch Be Removed From 2008 Dodge Ram 2500 to Install Curt Trailer Hitch
    You probably can't remove the factory hitch on your 2008 Dodge Ram 2500. They are usually welded on as part of the bumper structure. It would not be in the way since the Curt hitch # C15409 attaches to the frame around the factory hitch and the new hitch will be below the OEM hitch so it would not make it any easier to install the Curt hitch.
    view full answer...
  • Degree of Tolerance for Curt Trailer Hitches
    When it comes to square tubing, there is always going to be a degree of tolerance even with the most precision manufacturing. The tolerance of the Curt trailer hitch receivers such as the Curt Trailer Hitch Receiver part # C15409 is around .050" which means the opening can be anywhere between 2.070" and 2.115". With that being said it is always possible for the hitch pin hole or receiver tube opening to deform slightly after extended use near the capacity but the above hitch has a Class...
    view full answer...
  • High Capacity Trailer Hitch Recommendation for 2011 Ram 2500 with Factory Hitch
    The only options we have for a Class V high capacity trailer hitch for your 2011 Dodge Ram 2500 are ones that are going to fit below the factory hitch. Since the factory hitch is essentially part of the rear chassis of the truck it has to be left on. The most popular option is the Curt Hitch # C15409 which has a 2,550 lb tongue weight limit. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Recommended Class V Trailer Hitch for 2018 Ram 2500 With or Without Factory Hitch
    For your 2018 Ram 2500 without factory hitch, the Class V hitch I recommend is the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15409. This hitch is a fit for either 8 foot or 6-1/2 foot beds whether you have a factory hitch or not and is made in the USA. I've attached a photo of the fit on an older Ram to assist. I've also attached the installation details and a video to help with this easy installation.
    view full answer...
    Image 1 for
  • Class V Trailer Hitch Receiver For A 2022 Ram 3500
    Yes, the Curt Trailer Hitch Receiver # C15409 does fit your 2022 Ram 3500. This hitch has a maximum GTW of 17,000-lbs, and a maximum TW of 2,550-lbs.
    view full answer...
  • Does Curt Hitch # C15409 For 2017 Ram 2500 Allow Spare To be Store Underneath Vehicle
    The Curt trailer hitch part # C15409 that you referenced is a confirmed fit for your 2017 Ram 2500 short bed with a factory hitch. It will also allow you to keep your spare wheel and tire mounted under the vehicle.
    view full answer...
  • Recommended Trailer Hitch For A 2015 Ram 2500 With A Factory Hitch
    My trailer hitch recommendation for your 2015 Ram 2500 with a factory hitch is the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2", part # C15409. It has a maximum tongue weight of 2,550 lbs and a maximum gross trailer weight of 17,000 lbs. You will be able to install this trailer hitch without drilling. I have included a product description link and a video of this hitch being installed on a 2014 Ram 2500 below.
    view full answer...
  • 2 Inch Trailer Hitch Receiver for 2015 Ram 2500 With Factory Trailer Hitch
    I can definitely understand not wanting the look of two hitch receiver openings on your 2015 Ram 2500. The issue is that some hitch receivers are fully or even partially welded on, so there is no guarantee that one can be removed. So because of that I recommend a hitch that is designed to fit under your factory hitch, the Curt Trailer Hitch Receiver # C15409. This is a 2" hitch receiver that sits below your Ram's factory receiver, which is going to make it a bit easier to get your heavy...
    view full answer...
  • Recommended Trailer Hitch for 2011 Ram 3500 with Factory Hitch Installed
    For your 2011 Ram 3500, I recommend looking at the Curt Trailer Hitch Receiver # C15409. This Class V Hitch is confirmed to fit your truck and will actually fit models that have the factory hitch as well as those that don't. With that being said, I recommend keeping the factory hitch installed on your truck and installing the Curt hitch directly beneath it. You can take a closer look at the factory hitch on your truck to make sure, but these are typically welded to the frame of the vehicle....
    view full answer...
  • Will Class V Trailer Hitch fit 2019 Ram 2500 Without Needing to Remove Factory Hitch
    The Curt Trailer Hitch # C15409 will fit your 2019 Ram 2500 and you will not need to remove your factory hitch; this will fit underneath it. I added a cut out of the linked installation instructions which show that this hitch will fit under the OEM receiver. This is a Class V hitch with a 2" receiver and it will not require any drilling into your Ram 2500's frame to install. It has a tongue weight capacity of 2,550 lbs and towing capacity of 17,000 lbs. The Curt Trailer Hitch # C15409...
    view full answer...
    Image 1 for
  • Recommendation To Replace Damaged Factory Hitch on 2012 Ram 2500
    I am sorry to hear about your recent accident! To replace the factory hitch I recommend taking a look at the Curt Class V Trailer Hitch # C15409 that will line right up to existing holes in the Ram's frame rails for a no-drill installation and is made right here in the USA. It will provide you with a 2 inch receiver and it features a 17,000 pound towing weight capacity. I have attached an installation video and the written instructions that you can use for reference. A 2-1/2 inch hitch...
    view full answer...
    Image 1 for
  • Why Can't Factory Hitch of 2006 Dodge Ram Be Removed to Install Curt Hitch
    The OEM hitch on your Ram truck is welded to a cross member located behind the rear bumper. The cross member is an integral part of the vehicle structure and should not be removed, according to Curt. I attached an install video for this hitch part # C15409 for you to check out as well.
    view full answer...
  • Does the Curt Trailer Hitch C15409 Still Hang Down w/ out the Factory Hitch on a 2012 Ram 2500?
    Yes, the Curt Trailer Hitch item # C15409 will still hang down even if you do not have the factory hitch installed. It looks like all of the aftermarket hitches for the 2012 Ram 2500 have the same profile. The Curt Trailer Hitch item # C15409 is confirmed to fit your 2012 Ram 2500. It is made in the USA and has a 17,000 lbs towing capacity. I have linked an installation video below.
    view full answer...
  • 2005 Ram 2500 SLT 4WD Replacement Class V Hitch
    Yes, the OEM hitch on your 2005 Dodge Ram 2500 SLT can be removed when you install the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" item # C15409. Removing the OEM hitch will not change anything about the installation method or height of the Curt hitch. I have attached an installation video so you can see the process.
    view full answer...
  • Will Curt Hitch 15409 Fit 2003 Dodge Ram 2500 without Factory Hitch
    The Curt hitch part # C15409 is a fit for your 2003 Dodge Ram 2500 Short bed without a factory hitch. But you need to find out if your truck was originally a cab and chassis truck that never had a standard bed on it or if it did have a standard bed on it at one point. The cab and chassis truck frames are 34 inches measured from outside to outside that's an easy way to tell. If frame is wider than that the Curt hitch mentioned will attach to the frame. Whether or not it would clear the...
    view full answer...
  • Will Curt Trailer Hitch 15409 Fit a 2007 Dodge Ram 2500 with Factory Installed Trailer Hitch
    Yes, the Curt trailer hitch # C15409 will fit a 2007 Ram 2500 if it has the OEM trailer hitch. The Curt hitch will fit under the OEM hitch. I have included a link to a video showing a typical installation of this hitch and a link to the instructions for you.
    view full answer...
  • Which Hitch Sits Lower on 2011 Dodge Ram 2500 With OEM Hitch, Curt # C15409 or DrawTite # 41929
    Both the Curt # C15409 and DrawTite # 41929 hitch receivers are designed to work alongside the OEM hitch. Both sit beneath it when installed. My contacts at DrawTite and Curt were able to provide a measurement that will be helpful to you in determining the location of the hitches once installed. The distance from the bottom of the vehicle frame rails (which is where the hitches attach) to the top of the receiver tube is 9 inches for both products. Both the Curt and DrawTite hitches are...
    view full answer...
  • Do Curt and Draw Tite Hitches for 2007 Dodge Ram 2500 Hang at Same Height
    The crosstube of the Curt hitch part # C15409 does hang a bit lower but where the hitch opening is will be about the same as the Draw Tite # 41929. Reason being the hitch opening attaches to the bottom of the tube on this hitch. So in reality the hitch will hang about the same height as they are both designed to fit right under the factory hitch.
    view full answer...
  • Curt High Capacity Hitch for 2003 Ram 3500 with OEM Hitch
    For a high-capacity hitch that fits under the OEM hitch, you would use the Curt Class V, part # C15409, which is the only hitch Curt offers that is compatible with the OEM hitch. In order to install this hitch, your truck must have the factory bumper. As you can see in the install instructions, no part of the OEM hitch would to be removed. I have captured a diagram from the instructions that shows how the Curt Hitch would sit in relation to the OEM hitch.
    view full answer...
    Image 1 for
  • Installation Difficulty of Curt Trailer Hitch 15409 for 2006 Dodge Ram 2500 With Factory Hitch
    You will definitely be able to install the Curt Trailer Hitch Receiver - Class V XD - 2" # C15409 on your 2006 Dodge Ram 2500 yourself without the need for a professional. The reason for that is because no drilling is required to install the hitch, it will bolt on underneath your current trailer hitch, as you can see by the cut out of the linked installation instructions I added for you as well as a photo and review a customer sent in. The Curt is a Class V hitch, and to answer your other...
    view full answer...
    Image 1 for Image 2 for
  • Is Drilling Required to Install Draw-Tite Trailer Hitch 41929 on a 2011 Dodge Ram 2500
    I checked with Draw-Tite and they do indicate that drilling is required to install trailer hitch # 41929 on a 2011 Ram 2500. Curt hitch # C15409 does not require drilling according to the installation instructions that I have linked for you. I know that your previously asked about weight distribution and this hitch is compatible with weight distribution systems that fit in 2 inch trailer hitches.
    view full answer...
  • Do I Need to Remove the Factory Hitch on My 2004 Dodge Ram 2500 to Install an After Market Hitch?
    I would be happy to help you. Removing the factory hitch is not necessary and will be difficult to remove based on how it was attached to your Ram 2500's bumper. Ultimately, it'll be up to you but it being on there will have zero effect on the Curt Trailer Hitch item # C15409 you were looking at. The Curt is going to be the best option for adding a hitch. This is a Class V hitch with a 2" receiver that is custom fit and bolts to your Ram's frame with included hardware. It does require the...
    view full answer...
  • Recommended Upgraded Trailer Hitch for a 2015 Ram 2500
    The trailer hitch I recommend for a 2015 Ram 2500 Short Bed is the Curt Trailer Hitch Receiver part # C15409 for 2" or part # C15809 for 2-1/2". The Curt Trailer Hitch will fit models with the long bed or short bed, models with or without the factory trailer hitch, as well as models with the gas or diesel engine. The Curt Trailer Hitch also offers a bolt-on installation. In regards to weight capacity, these options will both exceed the vehicles capability so there should be no worries here. If...
    view full answer...
  • Curt Trailer Hitch Fit for 2006 Dodge Ram 2500 Mega-Cab 4x4 Short Bed Pickup
    Curt's 2-inch Class V hitch # C15409 is a confirmed fit on your 2006 Dodge Ram 2500 with factory hitch and factory bumper. The 2-1/2-inch hitch part # C15809 is also confirmed to fit. Both are designed to work with the stock spare tire but they have not been tested with the wider 285mm tire. The spare may fit, maybe with a bit of maneuvering, but we cannot say for sure. Your truck's towing capacity will remain as stated in the manual. Even if you install air bags and tires rated for more...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Chris R
Video by:
Chris R
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Jared G
Test Fit:
Jared G
Employee Ryan G
Test Fit:
Ryan G
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924