Don't Miss These Holiday Savings!
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.4 out of 5 stars (39 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Very difficult install. I’ve put 4 of these front hitches and this was by far the toughest. The hitch was tweaked in shipping, I get that but the measurements were off and I had to use a 2 pound hand held sledgehammer to beat it in. The the instructions are generic for a Ram 2500 and miss the fact for a power wagon you have to reuse the frame bolts because one of them ( the large one ) holds the tow hook. I asked if this fit my power wagon before I ordered it and trailer said it would but it’s about 1/4” to 3/8” too narrow at the tube but I got it too fit with great effort. Should have took me about 45min to put in, instead it was two hours because of the breaks I had to take to check if it was lined up and to rest my arm.
I was nervous about installing a front hitch On My 2019 ram 2500 because I've seen some that stick way out and are just a goofy eyesore when not in use. This hitch installed very easy and fit perfectly!! Best of all you can't really even tell it's there when not in use unless you look for it. VERY pleased on how this turned out.
I purchased this for a front E-bike rack while pulling our camper. Works great and was easy to install.
The install done at a local auto seems ok but I will have to get a 12 inch extension to make it functional on the Dodge Ram as it is not flush with the front edge of the bumper. Sad!
The hold down bolt that goes through for the receiver is terrible strips out. Can’t use a regular pen bad design.
Although I have not mounted the receiver yet, test fitting shows everything matches up well.
I mounted this on my 2019 Ram 2500 so that I can push my travel trailer into tight spots and to have the option to mount a winch if off road. I work well though it took about two hours to install since I don’t have a lift at home. I leave the hitch retaining pin in so that the air dam has support. All in all I think it look like standard factory equipment.
Mike.
2/13/2022
Still working out just as planned.
The receiver is too low and too short which requires an extension in case you want to use it for something like a bike rack. In every car I owned I installed a front hitch receiver but in this case it was the hardest to make useful
Jenny N.
9/29/2022
For a 2020 Ram 2500 non diesel, non Power Wagon model I recommend part # EH37FR which has a longer receiver opening that would extend past the bumper.
Show up on time, was real easy to installed. Looks great too!
Easy installation, my wife and I installed it in about an hour.
Great product. Perfect fit. Good price and all the customer service you can stand!
Good sturdy receiver. Installed it on my Ram 2500 in order to haul a heavy bike while pulling a camping trailer. It fit perfectly. The only difficulty was getting the bolts loosened on the truck. My strong armed buddy was able to get them loosened with a breaker bar. Would certainly recommend this hitch.
The step works like advertised but is a little loose in the adapter used in my hitch to reduce to a 2" receiver. Though no fault of the step, one needs to be careful using the step since there is nothing to hold on to un the center of the truck. I am happy to have the step but a permanent side-mount step might be better if I could have found one that was reasonably priced. Overall, a good product.
Instructions over simplified the install. Bolts are a bugger to get in with the bumper plastic cowl on. Be prepared to fight it or use some creative techniques. Also, I had to cut a bigger hole than shown in the coal to fit the front receiver and have room to get the pin in. Also, needs packaged better because arrived slightly damaged but looks like a sturdy product.
Well could have used some guides for installing the 4 smaller bolts. After about 30 mins and use of stainless steel wire wrapped around the threads we were able to get them installed. Pictures in the instructions were with the front bumper removed very deceiving but very helpful. Looks and works great.
Small bolts for back rail needed to be longer. With thickness of square washers ,frame and hitch the bolts were about 1/2 inch too short.
Great product.
Fit perfectly. I used a motorcycle lift to help hold it in position while I installed the mounting bolts. It allowed for it to be a one man job.
Item came banged up but still usable. The box was a bit damaged but looked like it was packaged already banged up. Bolts were hard to remove from the truck and took me longer than the novice, 60 minutes as stated, to install. It wasn't the easiest install but not too bad.
The only front hitch that will fit a Ram Power Wagon. Had to buy two bolts and grind a 1/16 off each side of the passenger and driver side rail
dFit was perfect and arrived in a timely manner!
Perfect fit utilizing attached hardware. I did have professionally installed by a Curt authorized dealer. Took them about 30 minutes.
Quick delivery and Exact fit for the front of my Ram 2500
Anthony
7/13/2023
as expected
Good product, fitment is easy and the directions are easy to follow. The directions say to remove both factory bumper bolts, but the top bolt does not need to be removed..
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Edward D.
8/26/2023
So far so good. Has held my fishing basket just fine.