bing tracking image
  1. Custom Fit Vehicle Wiring
  2. CURT
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. No Converter
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # C55319
Retail:$37.00
Our Price: $17.88
You Save: 52%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $50 qualify for Free Shipping
Shipping Weight: 0.36 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. 1-636-306-4830 to order CURT custom fit vehicle wiring part number C55319 or order online at etrailer.com. Free expert support on all CURT products. Guaranteed Lowest Price and Fastest Shipping for Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (10)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Custom Fit Vehicle Wiring - C55319

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • No Converter
  • CURT

Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind rear bumper
    • Plug in T-connector
  • Comes with dust cap for 4-way flat connector
  • Limited 1-year warranty


Installation

This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the rear bumper, along the driver's-side frame rail.


Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



55319 CURT T-Connector - 4 Wire

Installation Details C55319 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - C55319

Average Customer Rating:  4.9 out of 5 stars   (10 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.

by:

The Curt T-Connector Vehicle Wiring Harness-C55319 arrived ahead of schedule, is high quality, fits perfectly, was easy to install, very good price. Could''t be happier or more satisfied. Will definitely use E-Trailer again and tell my friends. C E Lane




by:
1998 Chevrolet Tahoe

etrailer customer service gets eleven stars but Curt gets one star due to issues on their end.




by:

Product was a perfect fit and works well. About the only improvment I can think of would be to provide an adapter for a 5 pin trailer connection.




by:

Just what I needed to add 4-flat trailer connection to Suburban




by:
1999 Chevrolet Suburban

Easy to install. Works like a charm. No issues. Would recommend to a friend.




by:




by:

worked with ease and did the job, than ks




by:
1998 Chevrolet Tahoe




by:
1997 Chevrolet Suburban




by:



10
10

See what our Experts say about this CURT Custom Fit Vehicle Wiring

  • Location to Connect 4-Way on 1994 Chevy Blazer
    According to a pair of manufacturers I checked with, your 1994 Chevy Blazer will have a t-connector beneath your Blazer along the driver's-side frame rail. So long as your '94 Blazer is a full-size, this will allow you to use the Hopkins Plug-In Simple Vehicle Wiring Harness # 41125 or Curt T-One Vehicle Wiring Harness # C55319. Your Blazer must be a full-size though; if it is not there isn't a wiring harness available.
    view full answer...
    Image 1 for
  • Class IV Trailer Hitch For A 1993 Chevrolet Suburban
    For your 1993 Chevrolet Suburban, we have the Curt Trailer Hitch Receiver # C14029. This is a class IV trailer hitch capable of towing 10,000lbs GTW, and 1,000lbs tongue weight. This hitch also supports the use of a weight distribution system. If you need some wiring, we have the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55319. This is a super easy to install kit, that will plug directly into your factory harness for a quick and easy job.
    view full answer...
  • Are Trailer Hitches and Wiring Fits Same Between 1998 and 1999 Chevy Tahoe
    Yes, the trailer hitches that fit a 1998 Chevy Tahoe like the Curt # C14029 also fit the 1999 Tahoe models. This is also true for the trailer wiring too like with the part # C55319.
    view full answer...
  • Will Trailer Hitch From 1999 Chevrolet Silverado Fit A 1999 Chevrolet Suburban
    The trailer hitch that came off the 1999 Silverado will not fit the 99 Suburban. The structure of the hitch and the mounting flange and holes are different. If you let me know the manufacturer and model of the hitch you bought I can find out what vehicles it will work with. If you need a trailer hitch for your Suburban I recommend part # 75725. This is a Class lll hitch and it has a 2-inch receiver opening. If you plan on doing some towing you might be interested in etrailer ball mount...
    view full answer...
  • Will the Curt Trailer Hitch C14029 Allow Rear Spare to Be Stored Under Truck
    The Curt hitch part # C14029 that you referenced has been confirmed as a fit for your 1998 Chevy Tahoe and would allow you still fit your rear spare tire under the rear of your vehicle. I attached an install video for this hitch for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8...
    view full answer...
  • Recommended Trailer Wiring Harness And Brake Controller For 1999 Chevy Suburban
    For the trailer brake wiring on your 1999 Chevy Suburban, I recommend the Universal Installation Kit for Trailer Brake Controller # ETBC7. This kit includes the wiring, connectors, and circuit breakers to transform a basic 4-way into a 7-way for trailer brakes. If you don't have a 4-way, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55319. If you don't have a brake controller yet, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller - 1...
    view full answer...
  • Brake Controller Recommendation for a 1996 Chevy Suburban 1500
    We carry a lot of brake controllers, but there is one I recommend the most. The Tekonsha Prodigy P2, # 90885. This is one of our best selling and highest rated controllers. This brake controller does its job well. It is easy to use, easy to understand, and looks good. I have included a link to the installation details below. This controller is a good, solid product. You can be confident with it. I see that you will more than likely need to hard wire the brake controller on your 1996 Chevy...
    view full answer...
  • Brake Controller Installation on 1998 Chevy Suburban
    GM did not start using the port under the dash until the 1999 model year. You will need to hardwire the controller into the existing vehicle wiring. Depending on what the tow package on your vehicle included, some of the wiring might be in place. Does the Suburban already have a trailer connector? If so, is it a 4-pole or a 7-Way? GM typically ran a blue and an orange wire from the rear of the vehicle up to the engine bay that terminates under the brake booster. In a 12 year old vehicle,...
    view full answer...
  • What is Needed to Install a Brake Controller in a 1999 GMC Yukon
    There is not a place under your dash for you to plug in a brake controller. You will need to use a brake controller 7-Way installation kit, part # ETBC7, in your 1999 GMC Yukon to hard wire and install a brake controller. I attached installation instructions and an installation video for this product for you to check out also. If you do not have a 4-Way present at the rear of your vehicle, you will need one before you can install the # ETBC7. I would recommend a custom fit wiring # C55319....
    view full answer...
  • Whats Needed to Install Tekonsha P3 Brake Controller in 1994 Chevy Suburban
    The Tekonsha P3 brake controller part # 90195 can fit your 1994 Chevy Suburban but there isn't a plug and play wiring harness for your vehicle as it was not equipped for this. So instead you'd need to start with a 4-way if you do not have one yet like with the part # C55319 and then convert it to a 7-way with the part # ETBC7 and you'd be set. I attached install videos for both kits for you to check out as well on similar Chevy Suburbans.
    view full answer...
  • Parts Needed to Install Trailer Brake Controller in 1995 GMC Suburban
    Since your 1995 GMC Suburban does not have an under-the-dash connection port for installing a brake controller, you'll use our all-inclusive installation kit, part # ETBC7. Apart from the controller itself this contains all the parts you need to fully a wire a controller like the superb Prodigy P3 # 90195. Your GMC needs to have a working 4-pole trailer connector in place in order to install the kit; if you need one use part # C55319 which is a simple plug-in install. I have linked a video...
    view full answer...
  • Parts Needed to Install Prodigy P2 Brake Controller 90885 in 1998 Chevrolet Suburban
    Your 1998 Chevrolet Suburban does not have an under-dash brake controller port like your F-150 did so to install your Prodigy P2 # 90885 in the Suburban you'll just use our brake controller installation kit # ETBC7 to hard-wire it. You need to have a working 4-pole harness on the vehicle to do this; if you need a 4-pole flat harness you can use # C55319 which is a plug-and-play part. The linked video shows the ETBC7 being installed in a 1999 Suburban and a helpful article is included too.
    view full answer...
  • Will the Tekonsha Prodigy P2 # 90885 Work with My 1998 Chevy Suburban?
    Yes! The Tekonsha Prodigy P2 # 90885 works with the # ETBC7 on your 1998 Chevy Suburban. However, in order to install the # ETBC7 to prep the vehicle for the brake controller, you need a 4-way wiring harness installed before installing the # ETBC7. If you need a 4-way wiring harness, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55319. This harness conforms to the combined wiring system on your vehicle. This means that the brake and turn...
    view full answer...
  • Class IV Trailer Hitch For A 1996 GMC Suburban
    For your 1996 GMC Suburban, we have the Curt Trailer Hitch Receiver # C14029. This is a class IV trailer hitch, that has a maximum GTW of 10,000lbs, and a maximum TW of 1,000lbs. If you need trailer wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55319. This harness is super easy to install, you simply plug # C55319 into your vehicle factory wiring and you're ready to roll. You may also need a ball mount kit, I recommend the Draw-Tite...
    view full answer...
  • Do You have a Brake Controller Wiring Diagram For a 1998 Chev. Tahoe,7 way-Brake Controller
    To wire your 1998 Chevrolet Tahoe for a 7-way connector and a brake controller you will need a 4 way wiring harness for your vehicle, part number # C55319 and a Brake Controller 7 & 4 Way Installation Kit, part number # ETBC7, along with the # 90195 brake controller you selected. You will attach the 4-way wiring harness inline with the connector located on the inside left rear frame rail. Then you will connect this 4-way to the 7-way kit to power the taillight functions. After this is done...
    view full answer...
  • Brake Controller for 1999 Chevy Tahoe Towing a 2006 Fleetwood Bayside Camper with Electric Brakes
    Since brake controllers are not vehicle-specific, you can use any of our brake controllers with your 1999 Chevy Tahoe and camper. The Dexter Axle Predator Electric Brake Controller, part # 58-8, is a great choice. It is inertia-activated, meaning you have a lot of mounting options for inside your Tahoe, has an LED display showing voltage output, and works with 1 or 2 axles. If you don't already have a 4-way connector on the back of your vehicle, you will need the custom-fit Vehicle Wiring...
    view full answer...
  • Wiring a Trailer Brake Controller With or Without Factory 7-Way on a 2000 Chevy Tahoe
    Your 2000 Chevy Tahoe will have a port for brake controller wiring adapter, # 3025-S. You will want to look in the electrical junction box on the drivers side, left of the brake pedal under the dash. I have included an FAQ on installing a brake controller on Chevy and GM pickups that will also apply to your Tahoe. The first two pictures show the box you are looking for and where it and the connection point for the adapter is located. Some models have a factory 7-Way pre-wired through the...
    view full answer...
  • How to Install a Break Controller from Scratch on a 1996 Chevy Suburban
    To install the Tekonsha P2 Proportional Brake Controller, # 90885, on your 1996 Chevy Suburban, you will need a couple of items. First, the brake controller. Next, Tow Ready Custom Fit Vehicle Wiring, # C55319, if you do not already have one. Last, a 7 and 4 Way Installation Kit, # ETBC7. You will need to hardwire the brake controller but it is not all that difficult for the average do-it-yourselfer. Start by installing the # C55319 harness. Installation is simple. The unit plugs in...
    view full answer...
  • How to Wire a Brake Controller on a 1999 Chevy Suburban K1500
    Your 1999 Chevrolet Suburban will need to be hard wired for installation of a brake controller. The Suburban did not get the wiring update that the pickup did until the 2000 model year, so the Universal Brake Control Wiring Adapter, item # 3025-S, will not work on your Suburban. You will need to splice the red wire from the back of the brake controller to the wire at the back of the brake pedal switch that carries power only when the brake pedal is pressed. You will also need to wire the...
    view full answer...
  • Installation of Brake Controller on a 1999 GMC Yukon
    The 1999 GMC Yukon will not have a brake controller plug-in port under the dash. To install a brake controller on your vehicle you will need to hardwire the brake controller with the Brake Controller 7 and 4 Way Installation Kit, part # ETBC7. To install the # ETBC7 kit you will need to have a 4-Way connector at the rear of your vehicle. If you need to install a 4-Way connector you can use the Tow Ready T-One Wiring Harness, part # C55319. The Tow Ready harness will plug into a connection...
    view full answer...
  • Parts Needed to Install a Hopkins Trailer Brake Controller on a 1999 Chevy Tahoe
    On a 1999 Chevy Tahoe, you will need to hardwire the brake controller, # HM47295, in order to install it. Hardwiring is not too difficult and I will include some helpful documents that explain the installation. First, if the Tahoe does not already have a 4-Way trailer connector, you will need to install one. The correct 4-Way is # C55319. I have included a link to the installation instructions for you. After you have installed the 4-Way or if you already have a 4-Way, you will then need...
    view full answer...
  • Parts Needed to Make a Tekonsha Primus Brake Controller Fully Functional on a 1997 Chevy Tahoe
    The first thing you are going to need is a 4-way trailer connection at the rear of your 1997 Chevrolet Tahoe if you do not have one. For that you will need a Curt T-One Vehicle Wiring Harness # C55319. I attached installation instructions and video for this product for you to check out. Next, you will need to convert the 4-way to a 7-way so that the Tekonsha PRIMUS IQ Electronic Brake Controller # TK90160 that you referenced can function. For that you will need a Brake Controller 7 and...
    view full answer...


< Previous



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.