1. Accessories and Parts
  2. Camco
  3. RV Vents and Fans
  4. Vent Install Kit
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape

Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape

Item # CAM25013
lowest price pledge
Retail:$22.17
Our Price: $8.63
You Save: 61%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.75 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions. Call 800-298-1624 to order Camco accessories and parts part number CAM25013 or order online at etrailer.com. Free expert support on all Camco products. Guaranteed Lowest Price and Fastest Shipping for Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (101)
  • Q & A (173)
  • Videos (1)
  • Photos
  • Why etrailer?

Camco Accessories and Parts - CAM25013

  • RV Vents and Fans
  • Vent Install Kit
  • Camco

This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions.


Features:

  • Lets you replace or install a vent on your RV's rubber roof or sidewall
    • Works for roof vents, side-mount vents, plumbing stacks, and refrigerator vents
  • Includes mounting screws, instructions, and white butyl tape that adheres to rubber surfaces


Specs:

  • Tape dimensions: 8' long x 3/4" wide
  • Number of screws:
    • (24) #8 x 1" Slotted, hex-head screws
    • (4) #6 x 1/2" Phillips-head screws
  • 1-Year limited warranty


25013 Camco Universal Motor Home Vent Installation Kit - White Butyl Tape for Rubber Roofs or Sidewalls





Video of Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Camco RV Vents and Fans CAM25013 Review

Today we're going to review part number CAM25013. This is the Camco RV vent insulation kit for rubber roofs or sidewalls. This kit has everything you need to replace or install a vent on your RV's rubber roof or sidewall. It is designed to work for roof vents, side mount vents, plumbing stacks and refrigerator vents. It does include all the items shown here. It includes this 8 foot roll of butyl tape, which is 1 inch wide, and as you can see, the butyl tape is like acaulking compound. Basically this type of tape, this white butyl tape will adhere to rubber surfaces. It also comes with the screws pictured here, the 24 number 8 by 1 inch slotted hex screws, and the 4 number 6 by 1/2 inch Phillips screws. This kitdoes come with a one year limited warranty. And that should do it for the review on part number CAM25013, the Camco RV vent insulation kit for rubber roofs or sidewalls.

.


Customer Reviews

Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape - CAM25013

Average Customer Rating:  4.7 out of 5 stars   (101 Customer Reviews)

This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions.

- CAM25013
by:

All products meet and exceed my expecta tions



- CAM25013
by:

The best part of the Maxxair MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat Manual Lift 10 Speed was installing it myself. I had climbed to my van to it's perfect white metal roof. Run an extension cord. Plugged in the [hardware brand] jigsaw. Bzzzzz. Four inches of sliced virgin metal. Four inches of hole across the roof. An existential moment. No going back. No trial run. Only forward. Forward like the Merry Prankster's bus. Only later did I realize the point of no return had long since past. It past when I drilled the pilot holes before making the crooked ragged jigsaw cuts. Installation was empowering. It took me out of my comfort zone. Cutting a ragged hole in the roof changed the way I think about cars. And it all worked out. Installation was as straight forward as people say it is. The hardest part was my mental resistance to cutting the roof. The vent doesn't leak. It moves air. It's quiet and does not draw much power. I love that it is reversible. At night, I set it to exhaust so light seeking moths don't die in the spinning blades. They are blown away instead of sucked in. For the electrical. I fused both positive and negative off the battery. I ran the power wires through flex automotive conduit. I picked up the fusing, wire and flex conduit from my local Walmart after figuring out what I needed. The hard part of that was determining wire gauge based on the total length of the feeds. The length was longer than I would have guessed when I measured it. And it all worked the first time I pushed the button. Great product. Great experience.



- CAM25013
by:

Worked as advertised. Relatively easy installation and good fit. Seems well built - much better than the fan we replaced! We have a 2005 34' Holiday Rambler RV and our old fan had essentially disintegrated. We just wanted a no nonsense manual fan that could work with or without the roof vent open (didn't need another remote!). Probably not 100% required to get the Butyl Tape kit if you use sealant of another type but highly recommended to ensure a tight seal and avoid leaks in the future.



- CAM25013
by:

Worked great during installation of topper for our slide out on the camper. No issues noted to date and no leaks from screws being installed. Great product and assistance from Etrailer service.


Comments
Still going strong and no issues. Have made numerous trips camping for as long as 17 days on one trip and still no issues. Great products and expert assistance when needed by etrailer.
Arthur - 07/14/2019



- CAM25013
by:

I've ordered several times from etrailer.com and always been happy. First, it's good not to feed the [on-line retailer] beast. Second, etrailer.com's website always has good solutions rather than my local trailer supply store which can be expensive on certain things. I found a bearing kit on etrailer.com that is a great value and perfectly matched my old bearings. I got my local brake shop to press the new bearing races into the hubs and I saved over $300 by doing it myself with the help of etrailer.com.



- CAM25013
by:

This was what needed. I live in a manufactured home I looked all over for this vent not even the builder of my home could help me. Thank you etrailer. You should let manufactured home owners know of your replacement Parts. Thanks Again tom michaels.



- CAM25013
by:

I received the product in a timely manner in great condition. The fan installed exactly how it was described it worked exactly how I hoped etrailer is a great company to do business with they have great customer service, provide you with installation instructions and videos., and very reasonable prices I couldn’t ask for more .



- CAM25013
by:

Picked up a used camper last October. I knew the old vent lid had duct tape on the hinge, and it gave out last trip. Ordered this one last week, got it today and was able to pull the old fan and drop this one in in around 45 minutes. The old vent was only held on with some butyl tape and dicor it appears. I did a quick test to see that the fan ran, but I haven't finished up the trim yet. I think I need to trim the skirt that comes with it, but first impressions are that it's a nice upgrade from the old vent.



- CAM25013
by:

no problem one year out.



- CAM25013
by:

Replacement for original product. Same quality and fit with no adjustments needed. Service from etrailer was timely.



- CAM25013
by:

Worked beautifully - pressed right in and conformed to the corrugations on my siding - great seal! I had removed all four vertical corner aluminum moldings on my TT; cleaned the siding; cleaned the molding/repainted. Re-installed with this new putty tape. Trimmed excess putty with Bondo plastic blade and the result was a professional finish. A year later the putty has not shifted or dried out (which was why I replaced in the first place). I dry camp in the hot Southwest a lot - so not having the putty dry out is paramount.



- CAM25013
by:

Good quality and includes screws. Butyl tape arrived fresh and flexible and not dried out and hard as can happen with this product.


Comments
Its butyl tape.... still providing a great seal and does not appear to have hardened
Carlos - 05/18/2017



- CAM25013
by:

The vent cover and the bathroom roof vent screen replacements were an exact replacement for my Arctic Fox. The putty tape was great. I couldnt be happier.



- CAM25013
by:

Items arrived fast with regular ground shipping. The roof vent was a perfect fit and installed as expectd. The price was awesome; it was half the price as the vent at my local RV dealer. etrailer.com wil be my go to for all my replacement parts.



- CAM25013
by:

Excactly what I needed to replace the old vents in my trailer. The Free shipping is great.. It really makes a difference with whom I bought from. I spoke with a person on the phone before I ordered my products just to make sure it was everything I needed. she was courteous and thorough..It was her who suggested these butyl tape kits.. good job ! I will definitely be buying from etrailer again.



- CAM25013
by:

Used this to hopefully stop and leaks on the awning rail.


Comments
It worked great but have since traded the trailer on something else
William - 01/13/2019


Comments
They worked fine but since then we traded that trailer in for something else. Thanks for asking Have a Great Day
William - 01/14/2019



- CAM25013
by:

Love this product. Easy to use and sticks great.



- CAM25013
by:

Works great for sealing mounting bracket screws, its a must have.



- CAM25013
by:

This kit made vent replacement a breeze. I just put the tape on the bottom of the new vent, flipped it over, set it in place, and screwed it down.



- CAM25013
by:

The only thing i dont like is that the last part of the tape is stick to a cardboard cylinder and is not easy to unstick



- CAM25013
by:

Not worth it. Buy sealant and apply yourself. Also hard to remove when you go to replace again.



- CAM25013
by:

I Fond Installation went easy.



- CAM25013
by:

Still providing a seal to my slide topper bracket after one year, no discoloration noted..



- CAM25013
by:

After watching installation video, the job went without a hitch.



- CAM25013
by:

This worked well with my fan install on the rubber roof of the 5th wheel. Simple and necessary.


26
102
Show More Reviews

Ask the Experts about this Camco Accessories and Parts

  • Is Sealant Also Needed if Using Camco RV Vent Installation Kit # CAM25013
    Camco RV Vent Installation Kit # CAM25013 would not require silicone sealant but if it were me I would use some, # 0160297, just to make sure that there is no leaking possible!
    view full answer...
  • Roof Vent Install Kit Recommendation for RV with Fiberglass Roof
    Since you have a fiberglass roof the RV roof vent install kit you'd want is the part # 344270KITW. The Butyl tape kit you mentioned # CAM25013 is for use with rubber roofs or sidewalls so it would not work for you.
    view full answer...
  • Determining Correct Replacement Vent For Heng Vent
    In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown...
    view full answer...
  • Replacement Vent Cover for 14-1/2 x 14-1/2 Opening on 2005 Fleetwood Camper
    Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Roof Vent Install Kit for a 2006 Rockwood Rockwood Ultra Lite Series M-2304S with Rubber Coated Roof
    The correct kit you need to install a roof vent on your 2006 Rockwood Rockwood Ultra Lite Series M-2304S with a rubber coated roof is part # CAM25013 as you mentioned. The reason for this is because the rubber coating and silicone may not be compatible with one another which could lead to an improper seal or break down of materials. You would need to scrape away the old material with a putty scraper before the butyl tape is used.
    view full answer...
    Image 1 for
  • Vent Replacement Covers For Pre-1984 Terry Travel Trailers
    The two lids you mentioned are now discontinued but most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the...
    view full answer...
    Image 1 for
  • Recommended Butyl Tape for MaxxAir MaxxFan Install
    There is not a specific size of tape you will need to install a MaxxAir MaxxFan. I recommend using the RV Vent Installation Kit part # CAM25013 which comes with 8' long x 3/4" wide of white butyl tape that should be more than enough for your needs.
    view full answer...
  • Supplies Needed to Install Dometic Atwood AT96121 Water Heater
    When installing a water heater it is best to have these supplies on hand: Camco # CAM25013 Installation kit includeing bytul tape and replacement screws. This reseals the outside door when new heater is installed. JR Products # 37207-30555 Gas pipe sealant. Throughly coat threads of gas line connections and tighten well. You can use this on your water connections as well. You can use the Loctite # LT37467 silicone sealer if needed. Also, it is not required, but if you are old-school...
    view full answer...
  • How to Choose the Correct Replacement Roof Vent Cover
    Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...
  • Replacement Trailer Roof Vent Cover with a 4-Point Hinge
    Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen...
    view full answer...
  • Determining Correct Replacement Vent Cover for 2011 Kingsport Trailer
    Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen...
    view full answer...
    Image 1 for
  • Replacing a 14 x 14 Vent Lid on a 1985 Kit Companion
    Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...
    Image 1 for
  • Replacement Vent Cover Recommendation for a 2000 Sundowner Trailer Valuelite 2 Horse Trailer
    Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen...
    view full answer...
  • Replacement Vent Lid for a Jensen 7000 Series Vent on a 2001 Winnebago Leisure Seeker
    In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown...
    view full answer...
  • Replacement Roof Vent Cover for a Keystone Cougar 327RES 5th Wheel
    Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...
  • How to Pick Out Replacement Vent Cover for Jensen Roof Vent on Trailer
    Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...
  • Replacement Vent Cover For Jensen RV Roof Vent
    Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen...
    view full answer...
    Image 1 for Image 2 for
  • How to Install Optronics LED RV Porch Light RVPLL8CB
    Optronics LED RV Porch Light RVPLL8CB installs using two mounting screws you provide. The black portion of the light pops off to reveal those mounting holes. These are shown in the linked video. The light uses a 2-wire design; either wire can be ground or hot.
    view full answer...
  • Replacement Vent Cover for Elixir Trailer Roof Vent
    Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen...
    view full answer...
    Image 1 for
  • Replacement Bathroom Vent Cover for 2017 Lakota Horse Trailer
    Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...
  • Replacement Vent Covers for a 1969 Wilderness Camper Trailer
    Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...
    Image 1 for Image 2 for
  • How to Know if Trailer Roof Vent Cover # 69284 Fits Roof Vent
    Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen...
    view full answer...
    Image 1 for
  • Replacement Cover for Jensen Trailer Roof Vent
    Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...
  • Replacement Roof Vent Lid for 2006 Coachman Travel Trailer
    In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown...
    view full answer...
  • How to Determine Correct Replacement Roof Vent Cover
    I do not have any information about what specific roof vent cover would have been used on your camper, but I can explain how you can figure it out. The first thing you'll want to do is get a measurement of the outside dimension of the vent that extends through the camper roof. Then, you'll want to closely examine whatever's left of the existing vent cover or the roof vent itself for a manufacturer name or part number. Also, examine the hinge used to connect the cover to the vent. Is...
    view full answer...
    Image 1 for

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Video by:
Andrew K
Employee Rachelle B
Written by:
Rachelle B
Employee Wilson B
Updated by:
Wilson B
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.