Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.
Features:
Specs:
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
When your boat trailer has been backed down the ramp and is partially submerged, these 60" tall guideposts that are mounted at the rear corners of the frame will stick out of the water, giving you two highly visible targets to guide your boat between for loading. The built-in LED lights on the posts stand out at night, making it easier for you to load your boat in the dark and for other drivers to see your trailer when you're on the road. The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between them correctly matches the width of your boat.
Pre-Galvanized Steel
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating less than 1 mm and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so its recommended that they be primed and painted.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (284 Customer Reviews)
Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Great product, easy to install, and works well. I had to trim about 6 inches off the tubes, but that was easily done.
Love these guide-ons with lights. Makes loading at ramp much easier. e-Trailer beat the competitors in price as well. Would definitely buy again if I ever got another boat as these are a must have now in my book.
I put these on a 2005 Four Winns Funship 214, to replace the side bunks that are always under water when I load. They function as guides and for that purpose they are great. I have noted that they do flex some if I'm loading in a heavy current and because of that I have to adjust them often. The Four Winns Trailer has about a 1/2" margin of error on the outside bunks. I was really hoping these would be sturdy enough for me to keep them tight and hit the sweet spot on the trailer routinely. I'm seriously leaning to having the trailer modified this summer to give me a larger margin of error on the outside bunks.
As far as the product, delivery, and installation I could not be happier. I was trying to solve a complex problem with these and have realized that to do so will require other steps beyond these guide-ons.
Awesome and quick service. Very easy to install. I have a Rangertrail trailer. It took a little thinking because the trailer has running boards in front and behind the fender wells. No open c-channel. Marked 2 holes on top with bracket in place across c-channel underneath. Drilled 2 holes on each side. After that very easy. Followed video on YouTube. Thanks for a great product and great service. #CE27760
Darrell M - 06/14/2020Units were easy to install and gave the small boat trailer I put them on visibility over the tailgate of my four wheel drive truck. Simplified loading the boat on the trailer also.
Too flimsy for the pontoon boat. Can't barely touch it or they bend. I don't have any photos of the guides after it was bent. The very first time I put the boat on the trailer with the guides installed I approached very slow, as always, assuming the guides would assist a bit more than they did in squaring the boat for getting it on the trailer. I removed the bent one and straightened it. They do help guide the boat once the boat is squared up, but they are not ridged enough to help to square up the boat to drive it onto the trailer.
Jenny N - 02/15/2022Fast delivery, exactly what I ordered, excellent product. I'll complete my simple electrical hookup and be ready to test it out. I'm totally satisfied with etrailer and will continue to be a customer in the future.
The post style guide-ons was very easy to install and wire up. They have made it a lot easier launching my boat.
Service:
I ordered on a Sunday night. Received three emails that very evening. One from Customer Service, then George and finally one from Joseph confirming shipment. On Thursday the day of delivery, I received two emails informing me the item was due to be delivered that day and that it had been delivered to my door. Last, I received an email from Debie on Friday confirming receipt. WOW talk about customer service. You people are first class! I’ve been in customer service for the past 20 years and it doesn’t get much better than that.
Product:
Sturdy well-built product that provides a great look to my new 21ft Sea Hunt and Venture trailer. Can't wait to test it out when the weather warms up.
Tip:
Instead of running the light wires between the tubing and PVC guides you can start at the short end of the galvanized tubing with a finish nail and thin string. Drop the nail through until it comes out the top (long part) of the galvanized tube. Attach the string to the ground eyelet and second wire with masking tape and pull the wiring through while sliding the PVC guides over the tube as you pull. Gave it a great finished look (will only work if you position the U-bolts far back on the trailer as close as possible to the trailer lights).
Extremely pleased with the service and product - I will be back for my other trailer needs!
Thanks etrailer.com
I had purchased the Fulton boat guides earlier from another firm but had to return them because the U-bolts wouldn't work on my boat trailer (Not enough clearance between the u-bolt end and the bottom of my boat and I couldn't find replacements. I have a 16' Smokercraft Osprey with a bunk type EZ-Load Trailer. I opted to buy the CE Smith 60" guide posts with lights from etrailer.com. It turned out to be a very good decision. Easy install, they fit and work great and they arrived sooner than promised. Thanks etrailer.com!
Easy online purchase, super fast shipping and great price. Exactly what I needed. Thanks etrailer!
Dave - 05/08/2022Easy to install. My trailer does not have anywhere at the end to mount them so they are mounted in front of the axle. It does help with being able to see the trailer for backing. I have a rather tall F 350 with a toolbox and could not see the trailer out the back window at all.
Absolutely terrible. The item is loosely packed and the PVC is gouged, scratched and marked up. For the price, I do not recommend this product. Zero regard for packaging and zero interest in providing customers with a damage free product.
Sierra K - 10/26/2021If put nose of boat between guides you can’t go wrong. All you need than is power to run it on! Lights on top are really nice.
Great addition to my trailer. Makes night time at the boat ramp much easier.
Trailer guide post were very easy to install. They take the guess work out of loading my boat now.
It was easy to install and provides the visibility I was looking for when backing my trailer down a boat launch.
The guides are a quality item and easy to install. A 9/16 deep socket makes installation a snap. Unfortunately the packaging leaves much to be desired. There was no packing material in the box. The tubes were scratched and, in one case, gouged.
Quality attachments and easy install.
CE smith guides with LED lights on top look great and are very helpful at night.
I love this product, it was easy to install and it comes so useful in windy days and places without a dock. Lights look awesome as well.
Very easy installation and helps out loading the boat on the trailer. Very please with product.
I purchased the guide on trailer post with a light on top to be used on a lowe duck boat and Karajan trailer. The guide posts gives me the ability to see the sides and where the transom area of he boat and trailer when backing up in the dark into unimproved ramps. The lights on top make loading and unloading in the dark easier. Installation is easy, pulling existing wires out to tie into and heat seal to improve water tightness took a little extra time. I actually did not need all the height so I cut off about 10 inches and when trailering I can see in my rear view mirrors.
Great sturdy, fast shipping
Mike - 08/13/2022Great product! Super easy installation and bright LEDs.
Marc - 01/19/2020
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.