bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # DT73RR
lowest price pledge
Retail:$347.21
Our Price: $218.06
You Save: $129.15
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 36 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number DT73RR can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (194)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - DT73RR

  • Class III
  • 2 Inch Hitch
  • 4500 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 675 lbs TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,500 lbs
    • Maximum tongue weight: 675 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76332 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

Installation Details DT73RR Installation instructions

This Product Fits The Following Vehicles


Weight Carrying Capacity
Gross Towing Weight (GTW):
4,500 lbs.

Tongue Weight (TW):
675 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Exhaust must be temporarily lowered for installation , Minor heat shield modification may be required






Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - DT73RR

Average Customer Rating:  4.7 out of 5 stars   (194 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:
2022 Subaru Outback Wagon

In my option this hitch is way too short for my 2022 Outback. When mounted the receiver sits at least 3" under the rear bumper while other receivers I have had on other cars are even with the back of the bumper or even protruding a bit. My fold-up bike rack barely fits. I bought a Curt hitch from etrailers a few years ago for my 2016 Outback and it sits about flush with the back of the bumper. So if you have a 2022 Outback the Curt is probably a much better choice than the Draw-Tite.


Comments
The item # C67JR
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
$274.00
hitch does sit a little closer to the vehicle.
-- Etrailer Expert Sierra K - 06/20/2022


by:

This is for packaging and install, have not used it yet. Arrived quickly and well-packaged. Directions were Spartan but clear and easy to follow. Would buy again without hesitation. Removed muffler instead of dropping the exhaust, since I don’t have a tool for the hangars. As another has suggested, it is easier to reverse fish the wire through the holes in the frame and put the hardware on after, rather than trying to find the smaller hole with the loose end. A creeper is nice. Having a crate or something to put the hitch on is really the only way to do this alone, but it’s doable. 2 hours install time, and I’m pretty slow in general.


Comments
After a year, still looks great, paint is holding up, and worked awesome for bike rack all last summer and fall. Would buy again.
Chris - 04/25/2022


by:

I am happy with my purchase,this is the second tow hitch I purchased from etrailier. I was able to install it by myself in under two hours without having to drill any holes. What a great fit and this after market hitch rates better and has a higher rating than the hitch that Subaru offers for less than half the price! Thank you etrailier




by:
2022 Subaru Outback Wagon

I needed a hitch for my 2022 Subaru Outback to mainly carry a bicycle. The OEM hitch is around $385 with an install price of about the same. That seemed ridiculous to me, and also why doesn't this vehicle come with a hitch?? So I looked into an aftermarket hitch at etrailer because I have purchased from them before, for a Honda CRV, and had a wonderful experience. The quality, fit, install video, and customer service (SHOUTOUT to Pamela E!!)was top notch. And the experience of buying this hitch was the same. etrailer is just a pleasant company to do business with. My main concern with aftermarket was how low would it hang and how clean would it look? After install, which took about 1.5hrs, it looks like it belongs there and hangs just below the exhaust. For $xxx and a little of my time and effort, I'm very happy with it.




by:
2022 Subaru Outback Wagon

Installation was easy. Take your time. Maybe have a second person. Pro tip for Installation: when putting the hitch on, install the thread wires so that the bolts DO NOT go back onto their holes and not be saved. That way install is way easier. The directions are very very easy and short. I think it took me and a friend 1 hour and we were joking around and taking our time. Took no real brain bytes to do this as long as you have some very basic tools.

(Sorry for the horrible and late night photo of the hitch).




by:
Ford Edge

"Confirmed fit" for our Subaru they say, and had to modify and bend the steel plating to fit the holes on the hitch to the actual hole widths on the car frame. If you look closely at the measurements for where the steel tubing is welded to the steel plating, there is an inconsistent number on either side. I measured front holes and back holes center-to-center and they were different. Looking down on the hitch in the one picture, you can see how what would be the passenger side is bent inward. The corresponding measurement from the edge of the steel plating to the end of the steel tube is greater than it is on the driver's side. Hmm, if only they would have measured between holes before they welded it???? Nope, seems overly logical to double-check a product's final dimensions before selling it for $200+.

This hitch was slapped together and "powder coated" in a hurry. Lots of spots where the powder coating has flaked off, and it hasn't even been used. I have a hard time believing that happened during shipping. Said they'd give me $10 towards paint. How about a better product? I get it, demand is high and inventory low, though that's no excuse for shoddy products and poor craftmanship. I ordered a Curt hitch from etrailer a few months before this one and had ZERO issues. I will not be shopping for a Draw-Tite again.

Be warned, if you are installing this hitch yourself, be prepared to have to put your hitch into a bench vise and bend it till you get the width you need. I ended up having to bend both sides of mine to get another full inch of width. The etrailer representative I spoke with told me that these hitches may need to be flexed to be installed. My response was that might potentially weaken the steel to which then I'm ultimately responsible for, not etrailer and this substandard product. I'm disappointed etrailer; this is a new low for an otherwise reputable company.


Comments
I will have our customer service team reach out to you. It sounds like the side bracket were flexed as you have mentioned. The side brackets are made to flex with the vehicle frame as the vehicle travels the road. They can be flexed out of alignment while in transit to our facility or to you. I have a good FAQ that can assist with a flexed hitch. In regard to the paint I would recommend touching it up with a rust resistant paint that you will then have on hand for regular hitch maintenance.
-- Etrailer Expert Jenny N - 11/02/2021


by:
2020 Subaru Outback Wagon

The hitch is great quality. The install videos are good, but need to be edited to contain the same amount of information. If I had watched the 2nd install video first, it would have saved me a LOT of time. Do not reinstall the heat shield till after you have installed the trailer hitch frame.


Comments
Great quality, a year later and it still looks new, no rust, no dings from rocks.
Jeremy - 08/02/2022


by:
2022 Subaru Outback Wagon

I'll start with the only downside of the product - the shipping.
The packaging is very minimal and there is a very high chance of being damaged in transit. My hitch arrived partially sticking out of the box with paint chipped off.

With that out of the way, everything else about the hitch is great. Installation was easy and very straightforward. The measurements for drilling a hole through the heatshield were not 100% center but that did not affect the quality of the install.

The appearance of the installed hitch looks very clean and, in my opinion, is preferred over the OEM hitch location which would require some cutting of the rear bumper fascia. The hitch is barely visible when standing behind the vehicle. The hitch looks great installed.




by:

Marvin ordered the wrong hitch. Fortunately, I discovered this prior to shipping and was able to get the correct hitch ordered. When it arrived, it was packaged poorly, this allowing the hitch to tear large holes in box. There was NO hardware. I called and left two messages for
Marvin, no calls were returned! My husband had to get our own parts to
Make our trip on time. Very disappointed in the Customer Service!


Comments
Customer Service will reach out to you.
-- Etrailer Expert Sierra K - 05/03/2022


by:

I love our hitch! It was a little tricky to install because I didn’t put the car up on a lift or blocks. I also had to remove the muffler, as I couldn’t reach my arms around to the bolt locations. The directions were very clear and helpful, though. I forget that we have it when not in use b cause it’s so low profile. Would definitely recommend to others!




by:

Class iii Draw Tite trailer hitch:

This
part was quick and easy to order and I received it sooner than expected. My mechanic said the installation was easily accomplished and looks great on my car. I would not hesitate to order from etrailer again!




by:
2022 Subaru Outback Wagon

Put this on my 2022 Subaru Outback Premium. This is a very good hitch and I am happy I bought it. etrailer's install video was clear and was all I used to install it.

A star comes off because the "powder coating" on the hitch was chipped off in a few places. In part, the box it came in from etrailer was insufficient to protect it -- the box was ripped and the hitch had scraped where it protruded through the box, but in a couple other places it was just chipped. That said, this isn't an expensive piece, and it seems very strong and well-made. 4 stars is very, very good. I do recommend it.

I installed it in 90 minutes by myself. I used jack stands and some contortioning to get in place without the much-recommended "second set of hands." I wouldn't recommend my method, but I did it!




by:
2021 Subaru Outback Wagon

Fit perfectly, install was easy, an extra set of hands made it easier to maneuver the hitch into place and get the fasteners started. The video on the website helped a lot, recommend watching it before starting the work.




by:

It is definitely a challenge installing by yourself, on your back in the driveway.Etrailer needs to update videos for Hopkins wiring harness. The plug in the 2022 is at the back hatch...literally pop the cover at the latch off and plug it in. It's no longer by the fender on the driver's side.




by:
2020 Subaru Outback Wagon

Overall the hitch meets expectations as a trailer hitch. I'd like to point out a couple of things that are not meant to be specific negatives, but considerations. My 3-stars is directly related to item 2 below. I really don't want to have to go through two install procedures.

1. Installation: 2020 Outback XT
The XT has dual exhaust, and there simply was/is not way to get the hitch in to position without removing the mufflers. There is not the room to contort the hitch in to position with the mufflers released from their mounts, but still connected.
THE GOOD - the mufflers are very straight forward to remove - two fasteners each and with the car being new, everything came apart easily and back together without having to replace any washers/seals. Add 45 min to your install time, take your time and all is good.

2. Use of Yakima 4-bike HoldUp Evo. The rack is angled down at the back. It is very noticeable on the 4th bike being titled toward the ground. This is not an issue on my '15 outback with Curti hitch (from e-trailer) - so it is not the rack (I tried it side-by-side to double check). The instructions say to add a washer between the rack and the car frame to only the ear mounting bolts which causes a slight down angle on the hitch receiver verified by putting a level on the receiver - in hindsight. I may end up going back through the whole process to remove those washers in an effort to even out the rack. I would suggest installation without the washers!

3. Shipping - UPS can't seem to deliver something of this composition without rough handling (same issue when I took delivery of the Curti for my 15 Outback). The hitch punched through the box in two locations. No damage done, but be aware and try to be present when they deliver to reject the shipment if they damaged the hitch during transit.




by:

Rec'd my Hitch (DT73RR) and Wiring Harness (C56040) in just a few short days after ordering. Kimberly in customer service was great! She answered all my questions about my 2020 Subaru Outback and even placed my order while I was still on the phone. I installed both in less than 2 hours. The hitch looks great and was easy to install with no drilling! This is the 2nd hitch and harness I've purchased from etrailer and couldn't be happier with my purchase. Great products and excellent customer service!




by:

To begin with the shipment was damaged during the process. I have included pictures. I think a header cardboard box or a better protection should be considered.
Additionally I was missing one of the install bolts, luckily I have enough stuff at home to resolve that issue.
Lastly installing the product was meet with some challenges, as I guess the hitch was dropped resulting in the distance between the two distal mounting point to not aligned with the vehicles mounting points. I had to use some creative techniques to install it.
Now it is on the vehicle secured, but it could of gone much smoother than this. Mind you I have installed hitched in the past and some even required more modifications, which I was glad your product did not. Stull I need to touch up pain the unit.


Comments
I have sent a note to customer service so that they can reach out to you about the missing bolt and damage. The flex you mention is a common issue that happens during shipment to our facility and shipment to you. There are a few ways to fix a flex issue with the help of this article:
-- Etrailer Expert Sierra K - 01/17/2022


by:
2022 Subaru Outback Wagon

I wish it would come with the wiring ha rness




by:

I could not believe how quickly I received the trailer hitch, it was approximately 3 days. Installation was extremely easy and the hitch fits the car perfectly!




by:
2021 Subaru Outback Wagon

Arrived in two day even though it left Earth, box was in ok shape but battered. The directions were to small to read, but the video told me enough. I drilled the hole needed with a spade bit trimming with a utility knife on the heat shield, I also had removed the muffler as the car was 7 days off the lot, and a 2021 model. I rested hitch on a cinder block while putting bolts on left side. Then got the right side in place. Used nut driver to run up, then torqued to the spec. Took me one hour and a half, I am legally blind so not a hard job for a person with good sight.


Comments
Still working great
Michael - 11/14/2021


by:
2018 Subaru Outback Wagon

Pulled a 2600 lb. Boat/motor/trailer with my 2018 Outback up to 75 mph on the 45 mile return home from purchase trip, no problem. I have launched and retrieved multiple times since, no problem. I'd buy it again, no problem!!




by:
2021 Subaru Outback Wagon

I order it on Friday, and it arrived noon Wednesday and by 6 pm it was installed. I paid the extra $[XX] over free shipping to get it here 5-7 days earlier, worth it. It took me about 2 hours to install, but I am slow, a second one would go much faster. No problems installing. One of those pictures is looking up at the 2 bolts that hold the hitch on the left side of the 2021 Subaru Outback. Mainly plan to use it for a bike rack.




by:
2020 Subaru Outback Wagon

Easy to put on with not much car knowledge necessary and pulled my trailer with a boat on its 1st run. All in all seems great and would order again from them.




by:

Got as advertised, instructions were simple and easy to navigate. Easy to install. Looking forward to many years of use. I would highly recommend e-trailer for anyone who needs towing products, customer service was fantastic and answered all my questions. Thank you




by:

We chose this particular item because it was the least amount of removing parts of our vehicle than the other hitch receiver and we are glad we did. Other than lowering the exhaust system, it was fairly easy. I do recommend 2 people install. Shipping was quick and we had no issue with the product upon arrival. This is the second hitch receiver we have ordered and will always use etrailer for any future needs.



25
194
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch



  • Why Is Ratings For Trailer Hitch Receiver So Much Higher Than Vehicles Towing Capacity?
    The rating of a trailer hitch receiver and the vehicle it was designed for rarely match up perfectly. In most cases including this one, Draw-Tite tested the hitch to higher standards and found the # DT73RR capable of the 675lb tongue weight and 4500lb trailer weight you mentioned. With that said you are always limited to the lowest rated component. So in this case even though the hitch is rated pretty high, you are still limited to the 200lb tongue weight and 2700lb trailer weight your...
    view full answer...
  • Availability Of Written Instructions For Draw-Tite Trailer Hitch DR73RR
    Absolutely! I went ahead and included a link to the written instructions of the Draw-Tite Trailer Hitch Receiver # DT73RR, and also included a installation video showing this hitch being installed on a 2020 Subaru Outback Wagon like yours for you and the installer to take a look at.
    view full answer...
  • Why Is The Draw-Tite Trailer Hitch DR73RR Not Fitting My 2020 Subaru Outback Wagon?
    I would be happy to help! The Draw-Tite Trailer Hitch Receiver # DT73RR you ordered through us is a confirmed fit for your 2020 Subaru Outback Wagon. Due to the size and weight of hitches it is not uncommon for the mounting flanges to get flexed during shipping causing some weird fitment issues like you are having. What you will need to do is follow the included help article that goes over identifying exactly how much your hitch flexed and how to correct it. I also included a video...
    view full answer...
  • Does Draw Tite Hitch DT73RR Fit 2022 Subaru Outback Wilderness Model
    Yes the Draw Tite hitch aprt # DT73RR does fit your 2022 Subaru Outback Wilderness model as it fits all models of the 22' Outbacks.
    view full answer...
  • 2022 Subaru Outback Wagon Curt vs Draw-Tite Hitch Receiver
    The Curt Hitch Receiver you referenced is inactive and no longer available for purchase but when it was the main difference in the two hitch receivers is the concealment and ground clearance that the Curt Hitch item CU89FR has over the Draw-Tite Hitch item # DT73RR. The Curt receiver is tucked in nicely below the trim cover for the bumper bar. The Draw-Tite Reciever has a crossbar that extends below the fuel tank and sits a couple inches lower. I have attached a picture that shows a comparison...
    view full answer...
    Image 1 for
  • What Does Draw Tite Hitch # DT73RR Weigh
    The Draw Tite hitch part # DT73RR that you referenced weighs 37 lbs.
    view full answer...
  • What Hitch Does Not Require Bumper Removal on My 2022 Subaru Outback Wagon?
    Yes, we certainly do! The Draw-Tite Max-Frame Trailer Hitch # DT73RR does not replace the rear bumper beam and therefore does not require temporary removal of the rear fascia. The Draw-Tite provides 675 pounds of maximum tongue weight and 4,500 pounds of maximum gross trailer weight capacity. It also comes with all hardware required for a bolt-on installation.
    view full answer...
  • What Hitch Will Fit On A 2021 Subaru Outback Wagon.
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT73RR has the easiest installation. It is a class three hitch with a maximum gross trailer weight: 4,500 lbs a maximum tongue weight: 675 lbs and it is not rated for use with weight distribution systems.
    view full answer...
  • What Hitch will Install on My 2022 Subaru Outback without Having to Remove the Rear Bumper?
    For installing a hitch on your 2022 Subaru Outback, most of the hitches we carry do require for you to remove your rear bumper during installation. If you are looking to avoid that step, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" # DT73RR. With the Draw-Tite hitch, you will not need to remove the bumper at all for the installation. Apart from providing you with 675 pounds of maximum tongue weight and 4,500 pounds of towing weight capacity, it comes with...
    view full answer...
  • Easiest To Install Trailer Hitch for a 2022 Subaru Outback
    The easiest install for this application will be the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT73RR. It takes on average about 50-60 minutes and there is NO need to drill new holes, its a custom fit.
    view full answer...
  • Does Draw Tite Hitch DT73RR Fit 2022 Subaru Outback Touring XT
    Yes the Draw Tite hitch part # DT73RR does fit your 2022 Subaru Outback Touring XT as it fits all 22' models.
    view full answer...
  • Hitch Receiver to Use a Rigid Armor Swing Out Spare Tire Carrier on a 2022 Subaru Outback Wagon
    I have a great hitch for your 2022 Subaru Outback Wagon and it has more then enough tongue weight capacity to support the Rigid Armor SWING OUT Spare Tire Carrier you mentioned. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT73RR. This hitch is custom fit and bolts directly to your Outback Wagon's frame with included hardware. I have linked an installation video.
    view full answer...
  • Comparing Draw-Tite and Reese Trailer Hitches for a 2022 Subaru Outback Wagon
    The Draw-Tite # DT73RR and Reese TowPower 84332 for your 2022 Subaru Outback Wagon are essentially the exact same hitch. These companies have the same parent company so sometimes there is a crossover with the products simply because some people will trust one brand name over the other. Attached is an installation video for you to check out. If you let me know what you plan on using the hitch for I'd be more than happy to make a recommendation for you!
    view full answer...
  • Trailer Hitch Recommendation for 2020 Subaru Outback For Towing
    We can get your 2020 Subaru Outback set up to tow your R-Pod, and let's go ahead and start with the trailer hitch I recommend, which is from Draw-Tite: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT73RR This hitch fits all models of 2020 Outback, including your XT, and I really like it for a couple reasons, starting with the install. Of each of the hitches for your Outback, this is the only one that doesn't require you to remove the bumper for installation. The # DT73RR will require...
    view full answer...
  • Will The Trailer Hitch on my 2017 Subaru Outback Fit On A 2022 Subaru Outback?
    We do have hitches for your 2022 Subaru Outback Wagon, sadly the Draw-Tite Max-Frame trailer hitch receiver # 75673 is NOT a confirmed fit for the 2022 Subaru Outback Wagon. There was a generation change in the Subaru line so the specs have changed from your model to this one. The Draw-Tite Max-Frame Trailer Hitch Receiver # DT73RR is a confirmed fit for your Subaru Outback and it requires no drilling.
    view full answer...
  • What is the Best Hitch for My 2021 Subaru Outback Wagon?
    The best hitch for your 2021 Subaru Outback is the Draw-Tite Max-Frame Trailer Hitch Receiver # DT73RR. There are two reasons for this. First off, it has the highest weight rating out of all hitches we carry for your vehicle (675 max tongue weight and 4,500 max towing weight). Also, it has the easiest installation as well and only requires a minor trim of your vehicle's heat shield. If you are planning on towing a small trailer on your vehicle, I recommend the T-One Vehicle Wiring Harness...
    view full answer...
  • Does the Bumper Get Removed During Installation on a 2022 Subaru Outback Wagon
    I have linked the instructions and an installation video for you but no the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" item # DT73RR does not require the bumper to be removed when installed on a 2022 Subaru Outback Wagon. If you are in need of a 4-way connector I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118467. This custom-fit T-One connector plugs into your vehicle's wiring harness located in your rear...
    view full answer...
  • How To Order Replacement Mounting Hardware For A Trailer Hitch
    For your Draw-Tite Max-Frame Trailer Hitch Receiver # DT73RR, you'll just need to use # RHK to order replacement hardware. Using the image attached for reference, you'll just need to enter your hitches part number in the "Hitch Item Number" box, for you, you'll type "DT73RR". Finally, you'll select your hitch's manufacturer from the "Manufacturer" drop down, which for you will be Draw-Tite.
    view full answer...
    Image 1 for
  • Does Draw-Tite Trailer Hitch DT73RR Require Heat Shield To Be Modified On 2020 Subaru Outback
    It is not possible to install the Draw-Tite Trailer Hitch Receiver # DT73RR on your 2020 Subaru Outback Wagon without minor modification to the heat shield. With that said the modification is drilling a 1-3/8" hole in the heat shield to clear the carriage bolt use to install the hitch. Doing so will not void the warranty on your vehicle as you are protected by the Federal Magnuson–Moss Warranty Act. It allows aftermarket parts to be installed without warranty issues unless the install...
    view full answer...
  • What is Difference Between Draw Tite Trailer Hitches that Fit 2022 Subaru Outback Wagon
    The two Draw Tite hitches that fit your 2022 Subaru Ouback Wagon part numbers # DT94MR and # DT73RR have different advantages but the best in my opinion is the part # DT94MR as it has a mostly hidden appearance due to only the hitch opening hanging below the rear bumper which also helps with ground clearance. But it's doesn't install quite as easily as the # DT73RR which also has the higher towing capacities.
    view full answer...
  • What Are Some Differences Between the Trailer Hitches Available for a 2022 Subaru Outback Wagon
    There are a number of hitch options available for your 2022 Subaru Outback Wagon. Some of the differences will be in how much weight the hitch can handle, but all of the hitches exceed the weight limits of your Outback Wagon so that does not play a huge roll in picking a hitch. You also want to consult the owners manual of your Outback Wagon to ensure you are not exceeding the manufacturers weight limits. All of the hitches will also provide you with a 2" receiver opening which is the most...
    view full answer...
    Image 1 for Image 2 for
  • Best Hidden Style Hitch For Carrying A Bike Rack On A 2022 Subaru Outback Wagon
    If you are looking for hitch that will not be super visible when not in use and will maximize your 2022 Subaru Outback Wagon's capacities, I recommend going with the Draw-Tite # DT94MR. This will be a fairly difficult install, but once finished it will only have the receiver portion of the hitch exposed. So no ugly crossbar to look at. I included an install video for you to check out as well. It will definitely help if you were going to be doing the install yourself. This hitch will also...
    view full answer...
  • Do I Need to Remove My Bumper to Install a Hitch on my 2022 Subaru Outback Wagon
    We actually have a few different hitch styles that fit your 2022 Subaru Outback Wagon and they come from Draw-Tite. If you go with the hitch # DT94MR then you'll have a cleaner looking install when you're done, but you will need to remove the bumper. If you go with the hitch # DT73RR then the install won't look as clean because you'll be able to see the crosstube, however you won't need to remove your bumper for the installation in this case. I personally like the # DT94MR because it not...
    view full answer...
    Image 1 for Image 2 for
  • Do You Have a Photo of the Draw-Tite Hitch # DT73RR Installed on a 2022 Subaru Outback?
    Yes! I am happy to report that we have both photos and a video of the Draw-Tite # DT73RR installed on a 2022 Subaru Outback. I went ahead and attached both the photo and the video to this answer. If you are looking for a more hidden design, I recommend going with the Draw-Tite # DT94MR. I went ahead and attached a video that shows how this hitch installs.
    view full answer...
    Image 1 for


< Previous
123. . .5



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C
Employee Shane H
Test Fit:
Shane H
Employee Ryan G
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.