bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 7 Inch Display
  6. Wireless Signal
Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen

Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen

Item # FCE48TASL-07
Our Price: $983.90
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 4 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right for you? Product Expert Kathleen M says:

Yes, if you:

  • Drive a motorhome or truck with plenty of room on the dash for a large 7" monitor
  • Get nervous that someone might be in your blind spot when changing lanes
  • Want an easy setup process, especially if you have the pre-wired shark fin from Furrion

No, if you:

  • Haul an Airstream, toy hauler, or trailer with lots of walls that can cause interference with wireless systems
  • Often power wash your rig and don't want any water to get in and fog up the camera
Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras. Great Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen part number FCE48TASL-07 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (590)
  • Q & A (0)
  • Photos
  • Why etrailer?

Furrion RV Camera System - FCE48TASL-07

  • Backup Camera
  • Observation Camera
  • 7 Inch Display
  • Wireless Signal
  • Furrion
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Night Vision
  • Motion Detecting
  • Waterproof
  • Dashboard Pedestal Mount
  • Suction Cup Mount
  • Below Rear Clearance
  • Side Marker Lights
  • 120 Degrees
  • 3 Cameras

Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras.


  • Marker light cameras replace your clearance lights to improve visibility and obstacle detection for your RV or camper
    • Minimize blind spots on both sides of your RV and help prevent accidents
  • DOT compliant, waterproof marker lights with detachable cover allow easy access to replace your bulb
  • CMOS sensors create high-quality digital video in full color
  • Gives you a 65-degree viewing angle
  • 12 Infrared LED lights on the camera's housing provide night-time vision up to 39'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Wireless backup camera system improves rear-view visibility and obstacle detection for your RV or camper
    • Minimizes blind spots and helps prevent accidents
  • Camera with CMOS sensor creates high-quality digital video in full color
    • Gives you a 120-degree viewing angle
    • Features a built-in microphone to pick up audio
  • Motion detection triggers monitor to power on
    • LCD auto-off setting lets you set your monitor to power off after 10, 20, or 30 seconds
  • 8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • 7" Full-color LCD touch screen monitor shows a mirrored image for a precise view from the driver's perspective
    • Auto-dimming, anti-glare screen let you view the display in any lighting
    • Rear assist marker lines show distance from other objects
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Speaker projects audio sent from your camera
  • Quad screen displays 4 camera angles simultaneously
  • Built-in digital transmitter eliminates interference from other devices
    • Offers high-quality, uninterrupted video up to 492' away
  • 2 Different mounting options allow you to display the monitor
    • Tabletop mount designed with 4 non-slip pads to sit on your dashboard
    • Suction cup mount secures to your windshield or dashboard
  • Simple installation - minimal drilling required
    • Mounting hardware included
  • System can be used as a backup camera or for observation
    • Wire to reverse lights for backup camera
    • Wire to running lights for observation


  • Side camera overall dimensions: 5-1/2" wide x 3-1/4" tall x 1-5/8" deep
  • Mounting hole spacing:
    • Vertically (left side): 1-1/8" center to center
    • Vertically (right side): 5/8" center to center
    • Diagonally: 3-1/8" center to center
  • Resolution: 720 x 480
  • Voltage: 12V - 24V DC
  • Wire length: 7-1/2"
  • Monitor dimensions: 7-7/16" wide x 4-15/16" tall x 1-3/16" deep
  • Screen size: 7"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing:
      • Horizontally: 3-3/4" center to center
      • Vertically: 15/16" center to center
  • Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty

Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.

Marker Light Side Cameras

Marker Light Side Cameras

The marker light side cameras are the ultimate upgrade for your RV's side marker lights. They give you the same DOT compliant marker lights with the added benefit of waterproof side cameras with LED night vision and motion detection. The cameras enhance visibility and minimize blind spots by giving you a wide 65-degree viewing angle. They also have detachable light covers for easy access to replace your bulbs.

Infrared LED Night Vision

LED Night Vision

The 8 infrared lights on the rear camera and 12 infrared lights on each side marker light camera produce a clear, quality picture. They give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.

Camera with Built-in Microphone and Monitor with Speaker

Cam Micro-Monitor Speaker

The built-in microphone on your camera is the perfect tool for backing up your RV. The microphone allows a friend or family member to relay information and instruction to you through your monitor's speaker, providing peace of mind as you work together to safely maneuver your RV.

Rear Assist Marker Lines

No more wondering if you're getting too close to that other vehicle. The rear assist marker lines take the guesswork out when backing up. This helpful tool displays reference points of objects within your view to avoid collisions and safely maneuver your RV.

Motion Detection

Motion Detection

The motion detect feature allows you to set the motion sensitivity level of your cameras to low, medium, or high. On the low setting, your cameras will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, they will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.



The auto-off setting is a great power saving option. Working in conjunction with the motion detect setting, this feature allows you to limit the amount of time your monitor stays on. Once motion is detected, you can program your monitor to power off after 10, 20, or 30 seconds of inactivity. The LCD auto off option will only power down the illuminated screen while keeping the monitor on.

Quad Split or H Split Display

Quad-H-Split Display

The quad split or H split display allows you to view up to 4 camera angles at once (additional camera sold separately). Depending on your camera setup, you can view blind spots behind your RV or on each side of it while driving down the road or backing up.

FCE48TASH Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2

FOS07TASF Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

Replaces FCE48TASL-07

Alt 405203ET

Installation Details FCE48TASL-07 Installation instructions

Customer Satisfaction Score:

Customer Reviews

Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen - FCE48TASL-07

Average Customer Rating:  4.7 out of 5 stars   (590 Customer Reviews)

Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras.


The installation was fairly easy. The trailer came prepped for the rear camera so, it was attached and linked. The side cameras involved a little work due to being close to the pass-through doors. They went on with a bit of cutting of the trailer skin.

The problem is the right side trailer camera is reading that it's the left side and visa versa for the right. They are both installed correctly, facing back and the pairing button on the bottom.

Also when the two side cameras paired they caused the rear camera to unpair. I re-paired the rear and now the right side ( left camera ) is unpaired.

I've emailed Furrion for answers to my situation.

I dont use the side cameras as much as I thought I would. it does work nicely.
John - 04/10/2022


they work fairly well I have them hook up to the signal lights so they come on with the signal light (diodes are required)also have them on a constant power(signal only) so I can turn them on at any time(like when parking)the only thing is they should (build or supply an extension block to go passed the awning brackets.I made one to look passed the awning but I still have to modify the angle as I build it straight so it left me with a blind spot in the right far corner.but you can pick it up in your mirror. In photo one the awning is out but you can see where the awning bracket will come down and block the view if I didn't make the spacer.


Have not been out on the road yet but the install was easy even for a novice like me. My reflection 5th wheel was prewired so it was a plug and play for the rear camera. For the side cameras I used the two screws from the previous light. I put both screws in the top holes, (one behind the camera) as that seemed to secure it better then bothe screws not behind the camera. Instructions were a bit limited(or I didn't read them) on the side camera sync but I pressed enough buttons to figure it out. Picture looks great. Do watch for obstructions such as awning supports which will limit view. I also used silicone to keep the water out.

I find that i use the rear camera much more than the side cameras so i question whether i would have bought the side cameras again. The rear camera would cut in and out on the highway so I added a longer antenna and you have to make sure both antennas are straight up and down to get the best signal. All in all i get a good view behind the 35ft trailer and would buy the rear again.
Pete - 03/26/2021


The cameras work great. The set up wasn't as easy because Forest River has the plug and play set to the back up lights. So if you do their install the camera will only work when you are backing up. Not what we wanted. A quick google search found someone with a Forest River/Surveyor trailer who gave the instructions to hook it up to your clearance lights. So that's what we did.

Weve had this a year and still give it a 5 star. It makes backing up, driving down the freeway and roads so much less stressful. we can see everything behind us. Like others we dont use the side cameras as much but having the option is great.
DianeB - 07/28/2022


This camera set up is a great addition to our Rv. However it’s not quite as advertised. Our 2022 RV that we just purchased came pre wired for these specific cameras but it is not wired for the whole security set up and the cameras can only be seen on the monitor when the running lights are on the Rv are on which only come on when hooked up to the truck and are on on the truck. The “trigger” for the side cameras would be the directional also not wired in on the marker lights on the RV thus a waste of money for the side cameras and security monitoring. Without the directional trigger while driving, only the back up camera is viewed on the monitor.Also there is no power supply for the monitor for in the RV. Great technology but falls short for plug and play.

When mounted in the cab, the monitor typically works as an observation system together with a Furrion rear mounted camera to see the back, and two side cameras, for traffic observation. When mounted in the coach, the monitor typically works as a security system together with a Furrion doorway camera. In order to keep the cameras on when not hooked up to your truck you will need to wire it by running a power wire to each camera then connecting them to a switch like item # 37212225
Single Rocker Switch - On/Off - Black
. The switch will go directly to the battery in your trailer. You will need to turn the switch on while towing too, or the cameras will not be on. You should also add a 12V outlet in your trailer for the monitor to plug into when you are in the trailer like item # 37215105
12V Power Outlet for RVs - 1-7/16" Diameter - Hardwire - Plastic
-- Etrailer Expert Sierra K - 12/30/2021


Everything works great as advertised. We’ve been 1 year on the road from PA to FLORIDA to Wyoming and back to PA.
My one wish is that the 3 view screen would stay on the monitor as needed. (unless I missed that in set up)

I reached out to Furrion who did provide a possible solution. You will want to use the camera menu to access the LCD setting and turn it off. You will also want to make sure that the motion feature is also off. While in settings there will be a view all setting and you will want to choose the view that you will like.
-- Etrailer Expert Jenny N - 06/07/2022


Super Product, install instructions were a snap, and pairing the cameras was a lot easier than I expected. Order to shipping to receipt was OUTSTANDING!

It is still OUTSTANDING! Cant believe I ever backed a trailer without the use of built-in cameras. Very pleased with the purchase and my wife loves the fact that I can now see her when she is spotting me yes, we still do that!. Thanks
Mark P - 08/15/2022


I purchased this camera system before the wife, and I took out on a 3-month adventure following the Gulf Coast from South Padre Island Texas to Key West Florida and then back to north Texas. Before this trip we had complete several others and I was always worried about the tailgating cars we had encounter. They would get so close and then you would lose sight of them in your mirrors. So, before we headed out, we decided to invest in the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen.

Our camper had been prewired for a camera system, so the install was super easy. Basically, a screwdriver was all that was needed. You unscrewed the existing light signal, unplugged it then replaced with new one. So easy I would have trusted my teenager to do it (and that’s saying something). You must pair the cameras which was super easy and we tested it in the yard a few times before we headed off.

-Easy Install. Super easy if you already are prewired from factory.
-Worked GREAT. Easily to see other cars behind you when you can’t from mirrors.
-Made backing into spot super easy and eliminated the wife standing in blind spots waving me back. Now she thinks she did so well since we no longer get frustrated that I am not following her hand signals. LOL
-Picture is clear (could be better but it does the job).

-Screen mounting location. The screen is big, so it takes a lot of room if you mount it on your windshield within your view. I did do this, but it does block a good bit of your vision.
-Powering system: So, the cameras only activate if you have power going to them. The way mine is prewired it only supplies power when some form of driving/parking lights are on. My truck has automatic lights so no power until you override the auto and use manual lights. Then you forget and leave them on when you stop and go in somewhere. Really just a nuisance not a huge issue.

Recommendation if company see this post:

A lot of today’s trucks are equipped with touch screens and some sort of Car Play or Android Play systems. Since the cameras required Bluetooth to connect to provided screen anyways, develop an App for Apple and Android devices to display cameras to the vehicles screen, that would be AWSOME. Or some sort of adaptor that can plug into the system. This would reduce the visual interference the large screen takes up in the windshield.


System works as you would think. I did had an issue with the angle of the camera lens on the right side. It did not show the side of the RV like the left side did. I spoke with Furrion and they sent me a replacement unit. There was still an issue and I had to make a shim to get the correct view of the side of the RV. There maybe something with the side of the RV, because the left side was perfect. Anyway it works well. I am glad I bought them. Makes seeing the blindside a whole lot better. Being able to switch from side to back camera is nice. Being able to select which two cameras I wanted to see on the screen at one time that would be a nice feature. Overall good buy.


Ordering was easy. Delivery was just a couple days. Well packaged and no damage. One product was partially faulty. I got support easily and discussed the issue with a competent technician. He arranged for an immediate replacement. I was pleasantly surprised by the great service and the prices are as low as anyones. I'm a happy customer and will be ordering more stuff I'm sure.


These camera gave me a great range of view. Especially nice when in traffic driving through cities. The only issue I had was with wiring the side marker light cameras. My trailer only has 2 wires to the marker light but the camera has 4. I figured it out but it took a little time. The wiring diagram that comes with the cameras could probably be a little more detailed.


Never leave home without them. The audio is awesome and I can hear the wife loud and clear when backing up.

I leave it on the entire trip and makes life much safer. The side cameras have proven to be invaluable when navigating tight places such as gas stations.


Camera system works great. It connects quickly after turning on headlights. While driving, I have complete confidence of seeing the traffic behind me.
I have the three-camera system, but I keep my screen on the rear-view only so that the rear-view image takes up the entire display.
High quality image.
Easy initial setup. Just choose option(s) of how you want image to display.
The only negative, the image disappears sometimes. It is rare and the image comes back quickly.
Will buy this setup again for next trailer I purchase.


Website description said these cameras were for a 2018 Jayco Feather but I have a 2022 Jayco Feather 24BH and knew they would work because they're the same ones the dealer sells. In the installation video it noted to also order the wire shrink butt connectors but they weren't needed for the 2022. From the factory there were some easy quick snap disconnects (see pictures) already installed and the side marker lights are higher on the coach and access to the wires were inside the forward storage compartment. Install took about 1 hour for all three cameras but I spent more time than I wanted to in order to figure out how to get power to the cameras (indicated by the blue LED light on the camera casing). Turns out I had to turn my Ford F150 headlights off from AUTO to ON and then I was able to finally pair each camera without any issues. Pics below show the side lights as they were wired from the factory. Just removed the panels inside the front storage area to access the lights. Didn't have to run separate trigger wires either like the video said. Just take a picture of your wires before disconnecting them and then wire it back up to the same quick disconnects. Easy peasy.


I'm giving etrailer 5 stars on sales and delivery. I just received the camera system but haven't installed it yet. Get back to you on a later date.


I purchased the three Furrion Camera System which includes the rear, left and right side views.

Overall the system is excellent with sharp, real time views. I had a cheaper rear camera on a different camper and while the view was fair, it does not compare to the Furrion.

Coming home from Pennsylvania last August, we ran into some heavy rain. The right side camera began “clouding” up due to moisture inside the camera lens. Since the system was still under warranty, I contacted Furrion by email (they don’t take calls apparently) and their representative instructed me how to get a replacement. The process was relatively easy and I had a replacement camera within two weeks. Furrion customer service worked well.

However I just got my travel trailer back from have some warranty work done and when I hooked up my monitor, the left side camera was cloudy. I went through the same process and I just received word that a replacement was on the way (save your emails).

Even with the two side cameras having issues, I would still give it five stars due to customer service. Hopefully the new side cameras will stay clear (as they should even in wet weather) and the cameras I had replaced were just in a defective group.


It is a fantastic product. It was incredibly helpful in my cross-country trip.


So far I really like these cameras. They were very easy to install and seem to work well. I have only been on the road with them once, but am glad I made the purchase. E-Trailer made this and other purchases easy and correct. Thank You E-Trailer.


I love these cameras and display screen. Being able to see what is behind and beside us when we travel is priceless. I tried a different brand camera system before and learned a hard lesson when it caught on fire. I’ll only use Furrion from now on and recommend Furrion to family and friends.


Very good product. Takes the guesswork out of backing up.The screen can be hard to see in bright sunlight.


Installed this myself. Took about 6 hours. Finding the correct wire to splice was the worst. The picture is before the forever install.


I absolutely love this camera system. I don't necessarily use it to back up but it is invaluable in metropolitan areas when there is heavy traffic. When changing lanes it is great to know what is around you. The only issue I have is that the camera will switch from rear view to side view, we haven't figured that out yet. That being said I still would not want to be with out this camera system.


Great product! Easy to install, easy to use and great video quality. Excellent service.


Install was easy everything went well I wish the side marker cameras could be adjusted to get a Veiw of the side of the camper. It would give a Mark to line up with.

Everything is working well. I would purchase again
David - 02/09/2022


Works great. Excellent safety feature when pulling an RV. I can confidently know when someone is close behind or on either side when making lane changes. Excellent customer service from the manufacturer when setting it up. The instructions in the kit are lacking everything that you need. But after getting help it had worked great.

Show More Reviews

See what our Experts say about this Furrion RV Camera System

  • Side Camera Kit Setup for Trailer to Help Know When Vehicles are Completely Passed
    Yes, the side camera kit part # FCE48TASL can be used as a way to know when you've passed someone on the highway. We have an entire kit that includes the side cameras, a rearview camera, a 7 inch monitor plus motion sensors with the part # FCE48TASL-07 which would be your best option. This will trigger the side cameras automatically when you are passing a vehicle or one is passing you.
    view full answer...
  • Where To Install Furrion Side Marker Cameras On a 2016 Grand Design Reflection 30RLS 5TH Wheel?
    Typically the LED Marker Light RV Side Cameras # FCE48TASL that come in the Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-07 are mounted on the lower side marker lights. On your 2016 Grand Design Reflection 30RLS these are going to be the marker lights just behind your front cap on the 5th wheel over hang. This provides the best view of the blind spots for vehicles. Each camera has a 65 degree viewing angle and the camera will be far enough away from the awning that...
    view full answer...
  • Wiring the Side Marker Light Cameras of Furrion Vision S Wireless RV Observation System
    The Furrion Vision S Wireless RV Observation Camera System with Side Marker Light Cameras, # FCE48TASL-07 is to be installed using the yellow wire for turn signal trigger and you will need to be in multiple screen mode setting.
    view full answer...
  • Is Furrion Vision S Side Marker Light Camera Kit Compatible with Older Furrion 4.3" Monitor
    Thank you for the part numbers and I'm glad you asked! The Marker Light RV Side Cameras w/ Night Vision # FCE48TASL are designed to work with the newer Furrion Vision S camera systems so you will need to upgrade your current system to add this kit. To upgrade your system we actually have complete kits that come with the side marker light cameras. For a 5" monitor use kit # FCE48TASL-05 or for a 7" monitor use kit # FCE48TASL-07. I would say that you could possibly add an older Furrion...
    view full answer...
  • Will The Furrion Vision S Side Cameras Fit on 2022 Dutchmen Kodiak Cub With Round Side Marker Light?
    Yes, the Side Cameras # FCE48TASL which are included with the 5" Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-05 can be mounted in place of the round side marker lights you have on your 2022 Dutchmen Kodiak Cub 199RK. It will use the power from the existing lights to operate both the lights and the cameras. I recommend considering the Kit # FCE48TASL-07 as it includes the same cameras as the kit above but with a 7" screen. This will make it much easier to see when...
    view full answer...
  • Can Furrion Observation System Install on 2020 Tiffin Wayfarer Bulit on Mercedes Sprinter
    While most people do install the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-07 on trailers you certainly could install it on your motorhome. It would install the same way basically. This system will allow you to view what's behind you by simply turning on your running lights and then to the sides when you turn on the turn signals.
    view full answer...
  • Can I Use My Furrion Backup Camera With a Peak Monitor
    I did check with Furrion and all of their wireless backup and observation cameras, like the # FCE48TASL-07 , are only able to pair with Furrion branded systems. If you can let me know which Furrion system you have on your 5th wheel I may be able to find a larger Furrion monitor for you that is compatible, if you don't already have their largest available monitor.
    view full answer...
  • Do New Power Wires Need To Be Ran When Installing the Furrion Vision S Wireless Camera System
    In regards to the Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-07, you shouldn't need to run any new power wires so long as you already have a similar system in place. The main overhead camera will simply just use the same power wire your existing system uses. If you did not have an existing power wire you could just run a wire up spliced into the running light or back-up circuit but this does not pertain to you since you already have a system in place that you...
    view full answer...
  • Observation Camera System for 2019 Alpine 3320MK Pre-Wired for Camera
    Yes, your 2019 Alpine 3320MK is pre-wired for a Furrion observation system so the # FCE48TASL-07 that you referenced will fit and install easily. It will bolt right up to the bracket present at the rear of the RVs and will plug right in. The side cameras do not require any additional power wiring either as they get all of their power needed from the running light circuit. You may have to drill holes though if the mounting brackets don't match up perfectly.
    view full answer...
  • How To Wire the Furrion Vision S Wireless RV Observation Camera System So the Cameras Stay On
    The Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-07 is designed to be tied into either the running light circuit which would allow the system to be used when the running lights are on in the tow vehicle or the reverse light circuit which would allow the system to be used when the tow vehicle is in reverse. This would hold true for both the main and side cameras. It sounds like you are wanting to tie the system into a constant power source so you can use the...
    view full answer...
  • Will Furrion Vision S Wireless RV Observation Camera System Work on Metal Trailer
    Yes, the reception of the Furrion observation systems like the part # FCE48TASL-07 that you referenced is so good that metal trailers and vehicles won't be an issue at all. Of all of the wireless camera setups this brand has the best reputation for great reception. This will give you a really great way to see behind your trailer and to the sides!
    view full answer...
  • Camera Kit Recommendation For Travel Trailer to See Behind Trailer and On Either Side
    We have a really great solution for your situation with the Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-07. This kit comes with a rear facing camera and two side cameras so that you can see all around your trailer as you are towing to prevent hitting anything. This kit also has really great reception overall as well so it is the best solution all around.
    view full answer...
  • Can the Furrion Camera System with Marker Lights Be Used On Trailer with LED Side Marker Lights
    The Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-07 can be used on a trailer with LED side marker lights. There will be no issue with power draw/consumption. The new side marker lights/cameras will draw the amount of power they need which is not limited by the side marker light it replaced but rather the circuit's capacity. The trailer clearance light circuit on the tow vehicle is not geared only towards LED so you won't have any issue with power. I spoke with...
    view full answer...
  • Recommended Furrion Vision S System For 2020 Forest River Flagstaff 21FBRS Pre-Wired
    Since the 2020 Forest River Flagstaff 21FBRS Micro-Lite is pre-wired for a Furrion system the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen part # FCE48TASL-07 will work well for you. The backup camera will fit into the existing bracket on the back of the trailer and plug right in. The side cameras may require drilling into the side of the trailer to fit them if you do not have side camera brackets pre-wired on the trailer. The side cameras...
    view full answer...
  • Side Camera for Furrion Camera System
    The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen # FCE48TASL-07 is a great system that will allow you to have the side cameras. You don't need to replace your current LED's if you like them you will simply add these in addition. The Furrion system only has the side cameras that are integrated into the lights. The bulb may be replaced with an LED replacement if you want all LED lights. There are side camera that don't include a light...
    view full answer...
  • Availability of Wireless Camera to Connect to In-Dash Monitor on 2020 Chevy Silverado 3500
    We have backup/observation cameras that you can use on your 2020 Chevy Silverado 3500, but there are no cameras that you can install (wired or wireless) on your RV that will link to your in-dash monitor. This is the case with every truck. There are some camera systems that will install in place of a 3rd brake light that can tie into your in-dash monitor but at this point in time (June 2020) there are no confirmed fits for a 2020 Silverado. For a whole observation kit I really like the...
    view full answer...
  • Will Center Ladder on RV Get in Way of Rear Camera on Furrion Vision S System
    We haven't tested installing the Furrion Vision S Kit # FCE48TASL-07 between a ladder like what you're asking so I can't really speak to that, but I would be surprised if the ladder doesn't have any impact in what you can see. I did a quick search and it doesn't look like we have addressed this before so the only solution I can really offer is if you still want to go this route with a camera then try holding the camera up first to see what kind of view you will get prior to permanently...
    view full answer...
    Image 1 for
  • Can Furrion Vision S Observation System Fit In-Bed Truck Camper
    For what you are wanting the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-07 is exactly what you want. It will install easily on your camper and comes with rear and side cameras plus a 7 inch display thats easy to view and control. I attached an install video for this kit for you to check out as well.
    view full answer...
  • What are Display Options for Showing Multiple Camera Angles with
    Oddly enough there isn't a way to just have the three views without the block for the fourth. You can either do the quad split or the H split with four slots always.
    view full answer...
    Image 1 for
  • Can I Install The Furrion Vision S Wireless Camera On My 2004 Newmar Kountry Star Motorhome?
    Absolutely, you can install the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-07 on almost any RV, even your 2004 Newmar Kountry Star Motorhome. You will not only get side marker lights and cameras, but also a backup camera as well! This is a nice system for what you want as it comes with a screen to monitor the blind spots without having to tap into your existing RV Radio Screen. It is easy to install after watching Dave's install and...
    view full answer...
  • Which Furrion Camera System Has Side Clearance Light Cameras Included
    It sounds like you're looking for the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen # FCE48TASL-07 which has the shark fin camera and the two side marker lights. This system will work on your 2021 Grand Design Solitude 310GK and install to any pre-wiring. I've linked some review and installation videos of these parts for you to have a look at.
    view full answer...
  • What Diameter Ball Does The 7 Monitor For Furrion Vision S Wireless RV Observation System Use
    The 7" monitor included with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 7" Screen # FCE48TASL-07 you were looking at uses a .85" diameter ball for mounting. If your existing mounts are not .85" you can use the included suction cup mount. I included a video of the Furrion Vision S # FCE48TASL-07 for you to take a look at.
    view full answer...
  • Camera Observation System for 2018 Keystone Montana 3811MS with Side Cameras
    The monitor part number you mentioned is an older style of Furrion observation system not compatible with the current Vision S systems but what you can do is go with the Furrion Vision S System part # FCE48TASL-07 which is the 7 inch monitor setup that has the side cameras and the rearview camera you are wanting. I attached a review video and an install video for this kit for you to check out as well.
    view full answer...
  • Modifying Old Backup Camera Monitor System On Your Motorhome
    You could possibly rig something up to make this work but it's very possible that you will end up with a poor picture quality and run the risk of damaging your components. Without seeing your connector ends it is unclear if we have a plug in option that will work on your old camera. I would recommend the guy a new complete camera system because most modern camera's use shielded wiring which is not recommended to be cut, spliced or modified. If the shielding is damaged the camera will still...
    view full answer...

< Previous
123. . .11

Do you have a question about this RV Camera System?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Edited by:
Amanda M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Thomas T
Video by:
Thomas T
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Kevin C
Test Fit:
Kevin C
Employee Michael B
Installed by:
Michael B
Employee Adam Y
Written by:
Adam Y

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.