bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 7 Inch Display
  6. Wireless Signal
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen

Item # FOS07TASF
Our Price: $586.65
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight. Great Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen part number FOS07TASF can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (589)
  • Q & A (0)
  • Photos
  • Why etrailer?

Furrion RV Camera System - FOS07TASF

  • Backup Camera
  • Observation Camera
  • 7 Inch Display
  • Wireless Signal
  • Furrion
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Mirrored Image
  • Night Vision
  • Motion Detecting
  • Waterproof
  • Dashboard Pedestal Mount
  • Suction Cup Mount
  • Below Rear Clearance
  • Side Marker Lights
  • 120 Degrees
  • 1 Camera

Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight.


Features:

  • Wireless backup camera system improves rear-view visibility and obstacle detection for your RV or camper
    • Minimizes blind spots and helps prevent accidents
    • Supports up to 4 wireless cameras (additional cameras sold separately)
  • Camera with CMOS sensor creates high-quality digital video in full color
    • Gives you a 120-degree viewing angle
    • Features a built-in microphone to pick up audio
  • 8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • 7" Full-color LCD touch screen monitor shows a mirrored image for a precise view from the driver's perspective
    • Auto-dimming, anti-glare screen let you view the display in any lighting
    • Rear assist marker lines show distance from other objects
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Speaker projects audio sent from your camera
  • Motion detection triggers monitor to power on
    • Auto off setting lets you set your monitor to power off after 10, 20, or 30 seconds of inactivity
  • Quad screen displays 4 camera angles simultaneously
  • Built-in digital transmitter eliminates interference from other devices
    • Offers high-quality, uninterrupted video up to 492' away
  • 2 Different mounting options allow you to display the monitor
    • Tabletop mount designed with 4 non-slip pads to sit on your dashboard
    • Suction cup mount secures to your windshield or dashboard
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Simple installation - minimal drilling required
    • Mounting hardware included
  • System can be used as a backup camera or for observation
    • Wire to reverse lights for backup camera
    • Wire to running lights for observation


Specs:

  • Monitor dimensions: 7-7/16" wide x 4-15/16" tall x 1-3/16" deep
  • Screen size: 7"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing:
      • Horizontally: 3-3/4" center to center
      • Vertically: 15/16" center to center
  • Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.


Infrared LED Night Vision

LED Night Vision

This camera has 8 infrared LED night vision lights that produce a clear, quality picture and give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.


Camera with Built-in Microphone and Monitor with Speaker

Cam-Mic-Monitor Speaker

The built-in microphone on your camera is the perfect tool for backing up your RV. The microphone allows a friend or family member to relay information and instruction to you through your monitor's speaker, providing peace of mind as you work together to safely maneuver your RV.


Rear Assist Marker Lines

No more wondering if you're getting too close to that other vehicle. The rear assist marker lines take the guesswork out when backing up. This helpful tool displays reference points of objects within your view to avoid collisions and safely maneuver your RV.


Motion Detection

Motion Detection

The motion detect feature allows you to set the motion sensitivity level of your camera to low, medium, or high. On the low setting, your camera will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, it will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.


Auto-Off

Auto-Off

The auto-off setting is a great power saving option. Working in conjunction with the motion detect setting, this feature allows you to limit the amount of time your monitor stays on. Once motion is detected, you can program your monitor to power off after 10, 20, or 30 seconds of inactivity. The LCD auto off option will only power down the illuminated screen while keeping the monitor on.


Quad Split or H Split Display

Quad-H-Split Display

The quad split or H split display allows you to view up to 4 camera angles at once (additional cameras sold separately). Depending on your camera setup, you can view blind spots behind your RV or on each side of it while driving down the road or backing up.



729936 Furrion Vision S Digital Wireless Observation System - Night Vision - Rear Mount - 7" Screen - Touchscreen

FOS48TA-BL Furrion Digital Wireless Observation System w/ Color LCD Monitor - 4.3" Screen

FOS48TAPK-BL Furrion Digital Wireless Observation System w/ Color LCD Monitor and Bracket - 4.3" Screen

Replaces 729936

Alt 405069ET

Alt 110379





Customer Satisfaction Score:


Customer Reviews

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen - FOS07TASF

Average Customer Rating:  4.7 out of 5 stars   (589 Customer Reviews)

Wireless backup camera system has a waterproof camera with night vision. Touch screen, anti-glare monitor mounts to your dashboard. 120-Degree viewing angle and motion detector help prevent accidents. IR cut filter blocks infrared light in daylight.

by:

Well its a great camera and popped right into the OE mount that came with the trailer. CONS-The screen is HUGE and it is a problem blocking my vision on the dash, wish it had a better mounting system. Could have went with a smaller screen, even with my up close bad vision. Headlights need to be on, for my 5th wheel to power the camera. Camera is WAY over priced. But it is invaluable driving and backing.




by:

Haven’t had long but I really like it, bought this to go on my enclosed trailer because I go into areas that I need to turn around which requires backing up and some are really tight and the way I turn I can’t see what is behind me, this helps alot


Comments
After having this for a year i am glad i got it, its like having a second person to guide me backing up, i really like the motion sensing and all, I definitely feel more confident maneuvering around in tight areas and backing up to my house
James - 09/12/2021


by:

Trailer was prewired so it was an easy install, plug and play. I talked with Helen T who helped with my questions. Product arrived on time as promised.


Comments
The camera is working great.
Paul - 12/03/2022


by:

This camera is a bit pricey, but it's worth it. Set up was super easy for our Flagstaff 26RBWS trailer, which is pre-wired for Furrion cameras. The entire installation took only 10 minutes or so -- just replace the existing camera plate with the camera, plug it in, and plus in the monitor. It connected automatically, and works great. Just remember to turn on your lights, because the camera is powered by the trailer light circuit.




by:

The rear camera works as one would expect. However, the monitor is not as clear as my old Voyager and the build is less then the Voyager. Once the monitor was mounted on the Ram mount I have on the RV dash the monitor started to make a rattle noise which is coming from inside the monitor. Currently doing the research for a better monitor.




by:

Love this camera! It makes it easier to change lanes and back up. My Jayco was pre wired so installation was very easy. The first time I used it I had to remember that the lights had to be on to power the camera because of the pre wire. Much safer to change lanes now. I can see what’s behind me now.




by:

It’s a decent system with a good picture, while parked or slowly moving (backing up). The refresh rate is so horrible that it loses picture/signal constantly while driving. This is not a rear observation camera, it is solely a back-up camera! Do not purchase if you are looking for a true rear observation camera to use while driving and for back up assistance.




by:

This camera system is a must-have!
I
had it installed for me so I can't speak as to ease of install, but they didn't mention any issues.
I have never had an issue with connectivity. My trailer is 21' and there is about 33 feet from the monitor in the truck to the camera on the back. Nighttime view is great (see picture.)
I travel solo and it lets me back up without a spotter and without having to GOAL every foot and a half to see where I am. Knowing where traffic is around me on the road is a a huge safety benefit. It helped me avoid an accident on the freeway last summer. I had just passed a slow moving vehicle and was signaling to go back into the right lane when a low sports car decided to pass that vehicle as well without waiting for me to get back over. It darted around it and went between it and my trailer, cutting them off and passing me on the right. He was completely hidden in all mirrors and windows due to being so low and in my blind spots, but I spotted his movement in the camera and stayed in my lane until he flew past. Another couple seconds and I wouldn't have been able to correct back. If it wasn't for the camera, I believe there would have been an accident.
The hardest thing to get used to is the reverse view. I wish CW had done the step to change mirroring the view. When I see a car on the right in the monitor, I have to remember they are really on the left of my rig. Apparently there is a way to flip this to normal view but I haven't been able to do it yet.
The monitor plugs into the cigarette lighter in the cab of the truck and I purchased a vehicle-specific mount for it from [online store]. I put an XL Scosche magnet on the back of the monitor.And a Scosche magnetic holder on the mount. It holds well through all seasons and is easy to take off when not in use.
I would definitely purchase this again and have recommended it to others.




by:

Camera worked just fine on our 2017 GMC Sierra, but when we traded the truck in for a 2021 GMC AT4 the camera no longer worked. It seems the electric system doesn't support the camera and Furrion has not made an adapter...a year later! The camera sits in a closet until there is an adapter that fits. Waste of $600 for us.




by:

Order was left in front flower bed by USPS. Not so great for them. It took longer to check the items in the box than it did to install the camera. Longest was getting the ladder set up so a 75 year old person could safely reach the bracket on my Windjammer 3029W. Attached truck to the trailer for marker lights and camera scene came up immediately so apparently paired already.

Thanks again for prompt service and providing a great product.




by:

This system is worth every penny. Although it was more expensive than some other similar products, I believe this is a much better quality system. Works great and while we're driving we can see the traffic much better if what is behind us. Also when we're backing into our campsite it greatly improves vision and communication.




by:

Because our Jayco Eagle fifth wheel was prewired, installation was quick and easy. The one issue I have is we bought the 7” screen and it takes up a lot of the windscreen if I attach it with the included suction cup. Instead I lay it on the dash using the desk stand. Along with hand signals from outside the rig, we use the camera to look for any obstacles behind the rig. It also comes in very handy on the road to help ensure we’re clear if passing another vehicle.




by:

Great product and excellent service from etrailer. I have the camera on a 43’ fifth wheel and reception is great!




by:

Easy installation and works great for now time will tell.




by:

Simple installation and very good instr uctions.


Comments
Excellent
William - 05/12/2022


by:

After some research I purchased this system and couldn't be any more happier! Easy to install , I mounted below the center upper clearance light and wired to that light after I accessed the factory wiring. Instructions were very clear and setup was a breeze. Pairing the camera with additional side camera's was no trouble. The 7" monitor is great and the picture's are very clear ,the sound is great as well from the rear camera. I would highly recommend this product, great quality and ease of installation due to wireless features.




by:

Installation was a breeze due to our 2020 Grand Design 2670MK TT being pre-wired for this camera. Performance has been somewhat disappointing, though. Up front, in the cab of our pickup, the pic quality is adequate with fairly low signal strength. I intend to experiment more with a different antenna. We have not tried this device in low-light or no-light conditions. Note: Some RV's, such as our GD, have pre-wiring that only provides power to the camera only when the running lights are on. This is fine with us; but others may not like this setup.


Comments
After 1 yr, I still would give it 3 stars. We have the single camera setup. eTrailer is always great to work with but I would say this product is adequate at best. Display resolutionbrightness disappoints. Nerds might do better with a homebrew solution...which is ultimately where I think Im headed.
Kevin K - 09/26/2021


by:

Couldn't be better! Originally ordered a 4.3 inch screen, but changed to a 7". It cost a bit more, but I'm (and my wife) are ecstatic. Installation was a breeze. Fine folks to work with!


Comments
It was simple to install and we love it.
Tom - 04/15/2022


by:

Cameras work great. They are every bit as good as the OEM equipment on our car. I drive with them on continuously to be aware of traffic around my 5th wheel.




by:

Camera works great easy to install and etrailer great to deal with.




by:

I hear these are great. I just haven't installed yet as temperatures in Iowa are in the upper 90's right now! Will try to follow up!




by:

Everything was easy to install on my prewired camper. The only issue was i couldn't get the camera to power on. After two days of troubleshooting, I found out that my truck headlights had to be on to supply power to the camera. Now everything works fine.




by:

Works great,very satisfied.




by:

Very happy about the product and the service with ETRAILER.COM.




by:

One year and still working and worth every penny. I tow a 40 foot 5th wheel and having a back up camera is a must. Installation was not complicated (pre-wired for this product) and the wireless connection is 90% reliable. The mount system is not the best so I installed an after market mount using BulletPoint magnetic mount system to keep the monitor stable and in a good viewing location on dash of my RAM 3500.



25
589
Show More Reviews

See what our Experts say about this Furrion RV Camera System

  • Camera Recommendation for Prewired Winnebago Minnie 170S Trailer
    Your Winnebago Minni 170S is pre-wire for the Furrion Observation System part # FOS07TASF and not the Voyager system that you referenced as all new RVs that are pre-wired were designed for Furrion setups. The resolution is 720 by 480 so not quite hi-def but the next step down. It still looks really good and the details are sharp enough that the system allows you to see clearly what the camera is pointed at. This also has a 7 inch display which makes viewing easier in that regard as well.
    view full answer...
  • How to Select Other Camera Views with Furrion Vision S Camera System
    Sounds like you are asking how to switch camera views with the Furrion Vision S system part # FOS07TASF. To do that you just need to tap the screen of the display once which brings up the option to see the other cameras. Select any of the other cameras by simply pressing the screen. I attached a picture that shows what the different views selection looks like as well as a demo video that covers this as well.
    view full answer...
    Image 1 for
  • Furion Observation Camera Recommendation for 2019 Jayco Eagle 5th Wheel
    For your 2019 Jayco Eagle that is pre-wired for a Furrion camera the Vision S kit part # FOS07TASF that you referenced is a confirmed fit and would work well. This kit gives you a 7 inch screen monitor to easily view behind the camper. Check out the review video link I attached for more info as well. The camper in the video is a 2017 Jayco Jay Feather similar to yours.
    view full answer...
    Image 1 for
  • Best Back-Up and Observation Camera for 2019 Grand Design Fifth Wheel Trailer
    The best back-up and observation camera for your 2019 Grand Design Solitude 310GK is the Furrion RV Observation Camera System # FOS07TASF because its camera and 7 inch monitor combine to offer you the clearest view no matter the weather or what time of the day - or night - it is. The monitor is 7 inches which is large enough to ensure you aren't going to have to squint or struggle to see what is being shown; you can even adjust the brightness and color for that perfect view. The monitor...
    view full answer...
  • Wireless Side Camera for Viewing Gooseneck Coupler
    I suggest the Rear View Safety Wireless Hitch Camera # RVS-83112 for use in your truck bed for hitching to your gooseneck trailer. The wireless camera includes night-vision capability and uses 9V battery power (battery not included). It has a magnetic base to secure it to your wheel well. Just take if off and stow it in the truck when you're hitched. The color monitor plugs right in to your cigarette lighter outlet. Please see the linked video.
    view full answer...
  • Suction Cup Mount Recommendation for Mounting Furrion RV Observation Camera System # FOS07TASF
    Using the suction cup mount of the Furrion RV Observation Camera System # FOS07TASF looks to be your best option. That would get the display up and out of the way onto the windshield. This will also put it in an easy to see location as well.
    view full answer...
  • Will the Furrion RV Observation System FOS07TASF Work on a 2018 Jayco Jay Flight 27BHS
    Yes, the Furrion RV Observation Camera System part # FOS07TASF will work on your 2018 Jayco Jay Flight 27BHS. I assume your Jay Flight came with the factory Furrion mounting bracket so all you would need to do is attach the camera to this bracket, pair the camera and monitor to one another, plug the monitor in then you are ready to roll. I have attached a review video of the above system for you as well.
    view full answer...
  • How to Change Camera Location on Furrion RV Observation System
    Yes, to pair the included camera for your Furrion RV Observation System # FOS07TASF to a different location name on the monitor you will first need to select "PAIRING" under the menu options. Once selected you will select the desired camera on the monitor, which in your case will be "4 REAR/BACK CAM". Then press the "MONITOR PAIRING" button on the bottom of the camera itself for 3 seconds. This will pair the camera and sync it with the desired location on the monitor.
    view full answer...
    Image 1 for
  • How to Un-Pair Camera for Furrion RV Observation System # FOS07TASF
    In order to un-pair the camera on your Furrion RV Observation System # FOS07TASF and assign it to the correct designation you will first just need to press the button at the bottom of the camera itself and hold it down for 15 seconds. This will un-pair the unit. Once this is done you will just follow the original pairing steps again as outlined in the instructions manual (and also attached below) to set it as the rear camera.
    view full answer...
    Image 1 for Image 2 for
  • Furrion Vision S 7” Observation Camera Install on a 2018 Reflection 29RS Prewired to Thermostat
    That's pretty odd that your observation pre-wiring was ran to the thermostat of your rig. I'd be inclined to believe that is a mistake. Especially since you said the marker light circuit is pretty close to that area. You should run the circuit to the marker light instead. This will allow you to turn the system on and off by just turning the running lights of the tow vehicle on and off. This is the standard method for installing camera kits like the Furrion # FOS07TASF you mentioned which...
    view full answer...
  • Changing Locations for Cameras on Furrion Observation System
    It sounds like you are needing to change the location for the cameras on your Furrion Observation System like # FOS07TASF. To do this you basically just need to manually pair each one as if you are newly setting up the system. Select "PAIRING" under the menu options on the monitor and then select the particular camera location you want to have (Camera 4). After selecting the camera press the "MONITOR PAIRING" button on the camera itself for at least 3 seconds and this will sync it to...
    view full answer...
  • Can Different Brand Camera System be Used on Trailer with Pre-Wired Bracket for Furrion
    If your new Vanleigh Vilano is equipped with a pre-wired bracket for Furrion Backup Camera Systems like # FOS07TASF then a different brand setup can certainly still be used but it would just require a more intensive hardwired installation. The pre-wired bracket allows for an easy plug-and-play install so it is what I recommend but there's no reason any brand system of your choice couldn't be used instead. This particular Furrion camera system features a really nice 7 inch full-color LCD...
    view full answer...
  • Can Furrion Observation System Have Gridlines Turned On
    Yes, you can put grid lines on the display of the Furrion Observation system part # FOS07TASF that you have. Hit the menu button and then press up or down to get to the display option and from there you'll see gridline option.
    view full answer...
  • Does the Furrion RV Observation Camera System Display in Mirror Mode?
    The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 7" Screen # FOS07TASF is designed to display the mirror image for a precise view from the driver's perspective. This will show traffic on the left side on the left side of the monitor as you stated.
    view full answer...
  • Does Furrion S Monitor and Camera Need to be Paired Again if Camera Loses Power
    No, you do not have to pair the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision and Monitor # FOS07TASF again if power to the camera is lost. Most cameras are wired to the reverse light circuit so technically the camera loses power when the vehicle/trailer isn't in reverse anyways.
    view full answer...
  • Is Switching From Reverse Camera to Observation Camera Automatic with Furrion Vision S System
    Yes, you can switch from reverse camera to observation camera with the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - 7" Screen # FOS07TASF, so long as your trailer is wired to both the running lights and the reverse lights. The camera will switch automatically depending on when your lights are activated, as you can see in the cut out of the linked installation instructions I added for you. I have added a link to a video review for you to check out as well.
    view full answer...
    Image 1 for
  • Does the Furrion Vision S Camera Stay on While Driving
    The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision, part # FOS07TASF, does in fact stay on while driving. Your 2018 Jayco Hummingbird Travel Trailer does not have to be put in reverse to activate the camera. The only thing needed for the camera to activate is for the headlights to be manually turned on. Because your trailer has the prewire system, this camera is getting power from the running lights. To view what the camera is viewing, is plug the monitor into your auxiliary...
    view full answer...
  • Troubleshooting Furrion Vision S System Not Pairing Camera to Monitor
    Sounds like you might need to pair the camera of your Vision S system to the monitor so that the two can communicate. I attached a picture that details how to do this.
    view full answer...
    Image 1 for
  • Looking to Replace a Sony VCB-MHD1 Back Up Monitor.
    The Sony VCB-MHD1 System including rear camera and front dash monitor has been out of production since around 2010, and repair and replacement parts are no longer available from Sony. Even if you found a used replacement, it would already be overdue for failure. A totally new system will have color cameras with a much wider field of vision and night vision. Add to that the wireless connectivity that makes installation much easier. With this in mind I recommend the Furrion # FOS07TASF...
    view full answer...
  • Recommended RV Backup Camera For Airstream Basecamp X
    There are RV backup cameras that replace a 3rd brake light like the Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras - 7" Screen # FR94FR, but based on the pictures I was able to find of your Airstream Basecamp X it appears you do not have a 3rd brake light that matches the one included in the FR94FR. Instead I recommend the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS07TASF that includes a camera that can be mounted pretty much...
    view full answer...
  • Can Furrion Vision S System Install on Trailer with Voyager Pre Wiring
    You can install the Furrion Vision S system part # FOS07TASF on your trailer that was wired for a Voyager. You'd just have to remove the plug from the Voyager prewiring and hardwire the circuit to the camera mount instead as they both were designed to use the same circuit for activation, the running light circuit. I attached an install video for this for you to check out as well.
    view full answer...
  • Troubleshooting Furrion Vision S Camera System Not Getting Camera Signal On Monitor
    I am sorry to hear that you are having issues getting your Furrion Vision S camera to display on the monitor. Since you mentioned that you already tried moving the monitor closer but that didn't help, I recommend double checking that there is no appliances on in your trailer that could be causing interference. If that is not the case then I recommend checking that the antenna on the is installed all the way, and is pointing vertically. Lastly try to unpair the camera and repair it to...
    view full answer...
  • Which Backup Camera System Is Compatible With Furrion Pre-wiring on 2021 Grand Design?
    I wish that option would work, but unfortunately the Furrion Prewiring on your 2021 Grand Design will only work with a Furrion system like the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen # FOS07TASF. To use the customer installed backup camera kit for your 2019 Ford F-350 on your trailer you would need to wire it yourself following the specifications outlined in the instructions for the kit. While this could definitely be possible, it is not...
    view full answer...
  • Wiring Guide For The Furrion RV Side Camera W/ Night Vision
    For your LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FOS07TASF you will want to follow the wiring as provided below: RED: Connects to positive wire on running lights circuit. BROWN: Will connect to the positive wire on your vehicle's running lights circuit. BLACK: Ground wire YELLOW: Is the trigger wire, and is only used in LED versions.
    view full answer...
    Image 1 for Image 2 for


< Previous
123. . .20



Do you have a question about this RV Camera System?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Edited by:
Amanda M
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob H
Video by:
Jacob H
Employee Thomas T
Video by:
Thomas T
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924