In-stock alternatives that are ready to ship
Upgrades your Fan-Tastic Vent 730 Series roof vent for extra functionality. Works on high and low style bases.
Features:
Specs:
This Fan-Tastic Vent roof vent assembly kit uses a thermostat to help maintain an even temperature inside your RV, camper, or enclosed trailer. You can also control the dome (sold separately) and fan (sold separately) manually with a built-in hand knob or with the included remote control. A rain sensor is included as well to signal the dome to close and the fan to shut off when it gets wet.
Air out your RV after cooking or just draw in some fresh air while you sleep. This remote controls the vent's thermostat as well as its manual and automatic speeds. You can control the direction of airflow - in or out - with the push of a button. Operate the remote control in your RV or place it in the included wall cradle so you will always know exactly where it is.
Manual and Automatic Operating Modes
This variable-speed ceiling fan operates in 2 modes: manual and automatic. An on/off button automatically lifts the dome (sold separately) and activates the fan. To use the manual mode, press the arrow buttons on the left side of the remote or turn the knob on the vent housing to increase or decrease the fan speed.
The manual speeds are listed on the remote from 10 percent to 100 percent. As you cycle through the speeds with the arrow buttons, an LED light next to the selected setting will light up. As you cycle, you may notice that the LEDs for 2 settings will be simultaneously lit. This means that the selected speed is the average of both of those settings.
To switch from the manual to the automatic, thermostat-controlled mode, press one of the temperature arrow buttons on the right side of the remote. When using the automatic mode, you can preset the vent to maintain a desired temperature inside your RV. The temperatures are listed from 60 F to 90 F. As you cycle through the temperatures with the arrow buttons, an LED light next to the selected temperature will light up. Again, when 2 temperature settings are simultaneously lit, the selected temperature is the average.
The fan's internal thermostat will sense the actual room temperature, and the fan will run until the preset temperature is achieved. When the temperature rises above the preset temperature, the fan will automatically kick on again. So when you go out, you don't have to waste energy by leaving the vent running at full blast just to ensure that your RV is cool when you return. And because the fan will activate anytime that the preset temperature is reached, you can set up the system to ensure that your pets remain comfortable while you're out.
To reverse the direction of airflow, simply push the air out/air in button while the dome (sold separately) is open.
This Fan-Tastic Vent has a powered lift arm for the dome (sold separately), so you don't have to manually crank it open or closed. The dome automatically opens when you turn on the fan. An up/down button on the remote also lets you open and close the dome when the fan is not running.
And a hand knob is built in so that you can operate the dome in the event of a power failure.
A moisture sensor ensures that the dome will close when rain or snow hits. So you can leave the vent running or preset to run at a certain temperature, even if the forecast calls for rain. When the sensor gets wet, it signals the dome to close. With the dome closed, the fan blades will stop running. When the sensor dries, the dome will re-open and the fan blades will resume operation. To keep the sensor from activating in rain, snow, or humid and dewy conditions, simply add a vent cover (sold separately) to block moisture. To disable the rain sensor, hold the up/down button on the remote for 3 seconds.
This vent requires a 14-1/4" x 14-1/4" opening in your trailer's roof and ceiling. To replace an old vent, install this vent into the existing opening. If your roof does not already have a vent, you will need to mark and cut an opening between roof joists to install this unit. And the 2-wire design makes it easy to have your vent hooked up and ready for use.
Average Customer Rating: 4.2 out of 5 stars (15 Customer Reviews)
Upgrades your Fan-Tastic Vent 730 Series roof vent for extra functionality. Works on high and low style bases.Besides having a major crush on Justin B for his amazing service, I found this unit to work very well. I could not get the 13 speeds as noted in the review but it has two speeds that are just right. The install was only made difficult by existing wiring which is not a product problem. Thanks Justin B Thanks E trailer
The kit was delivered without the wireless remote. I am awaiting instructions from etrailer what to do next.
Jenny N - 04/19/2022This had to be modified to fit my Camper the corners of my original Fan-Tastic fan are tapered as well as the opening in my roof. The lift harm that came with the upgrade kit had the connector on the wrong side so I had to keep my old one in place. the Lock on my roof is completely on the wrong side so I cannot use the lock and i am not sure what is missing from the lower corner of fan upgrade
Sierra K - 08/26/2021I installed the product . It went in very smoothly with no hitches. My thanks to etrailer
employee Mariah who was very helpful in getting my questions answered and getting the Fan-tastic part ordered.
James - 05/03/2021 James B - 05/03/2021You are not supposed to move the knob unless in the event of power failure. If your knob is falling down by itself it is broken and needs replaced. There is a 2 year warranty on this so the manufacturer will get it replaced.
-- Sierra K - 5/11/2021Received on time, Reviewed instructions and installed. Unit worked as a new one.
I wish all things i order would be this easy.
Thanks etrailer
.
this picture shows the new wireless remote. I took 1/4" oak panel to form a patch cover where the hardwired remote was.
Installed pretty easy but instructions stated to keep the "jumper" installed on the circuit board for can motors & remove it for pancake motors. We have a can motor & until we removed the jumper we only had 2 speeds & off, now with the jumper removed we have at least 8 speeds.
My lift arm stripped and would not close. This upgrade kit has all you need and now have remote control. My wife was to short to reach controls before.
Replaced older style fantastic fan, not hard to install
The upgrade worked great. the install was pretty quick. I did not rush it and followed the directions and it my fantastic vent fine finally is going to be used.
Fast. Exactly what I ordered. Easy to install. Super helpful staff!
Fast delivery and I received exactly what I was expecting. Definitely order products with confidence again.
I got the fan and it installed easy peasy, works great.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.