bing tracking image
  1. RV Levels
  2. Hopkins
  3. Graduated Levels
  4. Screw-On
  5. Stick-On
  6. Manual Levels
Hopkins Graduated RV Levels - Stick-on - Qty 2

Hopkins Graduated RV Levels - Stick-on - Qty 2

Item # HM08525
Retail:$21.71
Our Price: $11.19
You Save: 48%
RV Levels
Orders above $50 qualify for Free Shipping
Shipping Weight: 0.1 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
The graduated level takes the guesswork out of RV leveling with numerical markings to indicate the amount of adjustment needed to raise or lower the trailer. Great Prices for the best rv levels from Hopkins. Hopkins Graduated RV Levels - Stick-on - Qty 2 part number HM08525 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (221)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Hopkins RV Levels - HM08525

  • Graduated Levels
  • Screw-On
  • Stick-On
  • Manual Levels
  • RV Levels
  • Hopkins

The graduated level takes the guesswork out of RV leveling with numerical markings to indicate the amount of adjustment needed to raise or lower the trailer.


Features:

  • 2 Levels included to help level front to back and side to side
  • Easy-to-see markings indicate how many inches are required to raise or lower a trailer or vehicle
  • Self-sticking adhesive back
    • Optional screw holes for permanent mounting
  • Made in the USA


Specs:

  • Quantity: 2
  • Dimensions: 3-3/4" long X 1-1/2" wide


08525 Hopkins RV Level (Graduated, stick-on)




California residents: click here


Video of Hopkins Graduated RV Levels - Stick-on - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Hopkins Graduated RV Levels Review

Today, we'll be taking a look at the Hopkins Stick-on Graduated RV Level, part number HM08525. The Hopkins Graduated Level is a great solution for leveling out your camper or RV. It features an elongated arch reflective bubble level with numerical markings that indicate, in inches, how far you need to raise or lower your trailer. The kit comes with two levels, so you can easily level out your front-to-back and side-to-side. They measure three and three quarter inches long by an inch and a half tall. Now that we've gone over some of the features of the level, I'll go ahead and show you how to get it installed. Now first thing we need to do is make sure that our trailer is level front-to-back and side-to-side.

Here on the side of our trailer, we'll need to find a fixed point. We're going to off the top of our trim right here with our carpenter's level. As you can see, we're slightly out of level front-to-back, and we're going to have a buddy go up front and lower our trailer. Yup, that's good. With the front-to-back taken care of we're going to go ahead level out our side-to-side.

We're going to come up here to the A-frame of our trailer. Now, with the level on our A-frame, you can see that our side-to-side is slightly out of level. We'll go ahead and have a buddy adjust our stabilizers. Little bit more. There it is. Now, with our camper level, we can go ahead and stick on our new Hopkins Graduated Level.

First thing we want to do is make sure that our area is nice and clean so our adhesive gets a good grip. I've already gone ahead and removed the adhesive strip on the back, so we'll just need to place it nice and slow and make sure the bubble remains center with the zero and then, we can stick it on. Now, it doesn't rightly matter where you stick it on your camper just as long as you know that it's level. And we've got it. Now that our front-to-back level on, we can go ahead and grab our next one, and this is going to be our side-to-side. First thing we need to do, like before, we'll need to go ahead and wipe that down.

Make sure it's clear of any dust or debris, that way our adhesive gets a good grip. Same thing as before, just make sure it's in with the zero . or lined up with the zero rather. All right, that looks pretty good. Now, if you'd like a more permanent mount for your level, we've got two optional screw holes that you can use. You'll just have to provide your own hardware. That's going to complete our look at the Hopkins Stick-on Graduated RV Level, part number HM08525. .

Customer Satisfaction Score:


Customer Reviews

Hopkins Graduated RV Levels - Stick-on - Qty 2 - HM08525

Average Customer Rating:  4.7 out of 5 stars   (221 Customer Reviews)

The graduated level takes the guesswork out of RV leveling with numerical markings to indicate the amount of adjustment needed to raise or lower the trailer.

by:

Works great. I only wish I would have purchased 2 sets, to make setup a little quicker by reducing trips around and around the trailer.




by:

They work excellent for leveling smaller trailers. Takes the guess work out of setting up my pop up with the marked inch indicators. Quick setup and flawless roof lifts with a level base!




by:

What's not to like. We use it to level our motorhome every time we park for the night. The way they are labeled is a little confusing, but you get use to it. Converting inches to percentage of grade another challenge. Very nice levels. We are glad we bought them.




by:

East to see and is staying attached (good adhesive).




by:

Not impressed, the adhesive strip on the back is too small and too thick, allows the level to move when installed. Removed until I can find better adhesive or maybe use the screw holes to fasten. Not sure of the quality of the level to use screws to fasten. I guess for the price it is what I should expect.




by:

Have used these on our travel trailers for many years. Easy tp apply and use.




by:

I liked how the graduations were tailored for front-to-back leveling and side-to-side leveling. What I wasn't too keen on, was the adhesive tape. Although it sticks very well, the size of the tape segment should have been larger. Overall, the levels work fine.




by:

These are great for leveling my travel trailer.




by:

Makes leveling an RV so much more easy. Stick them near the front of the RV and easily check them as you are placing the RV and adjusting the tongue jack.




by:

No packing, loose in shipping box.




by:

Exactly what was needed.




by:

I just recieved my new trailer cover and have not used it yet, but upon recieving it from UPS the bottom of the box was at the edge was open a little.I looked in where it was open and saw my trailer levels which I ordered also in this order. I know the original cover box was used and open to put my levels in same box and resealed properly, the box did not open where you sealed it but on the edge of the original box. My suggestion for future if box is opened that tape is put in both directions to secure shipment. Fortunatly my levels were in the box and everything is fine. Waiting to see how cover is. I've been very pleased with everything I've recieved from your company.




by:

Easy transaction and fast shipping! Exactly what we wanted!




by:

Have not put these on yet but they look great




by:

I use this every time I set up my tow-behind. It is so convenient to to check the front of the trailer right behind my tow vehicle for lateral level and the front side of the trailer as I set up the jack at the hitch.


Comments
I have been using these bubble levels for a year and I love them. Set up on the forward corner of the trailer. They allow me to know walking back from the tow vehicle I know if I needs to level the sides and from the hitch jack I can see the fore and aft level.
Don - 12/01/2020


by:

Great product and great services. These are the second set I've purchased.




by:

I bought these for our camper 1 year ago and they are still attached and work great. We camp in a lot of places where the ground is very uneven and need the levels for accuracy for the camper. These replacement levels are high quality and I highly recommend them.


Comments
Still working top notch! Still camping in the boonies where the ground is very uneven and need the levels. Still giving etrailer 5 stars!
Alan V - 07/25/2017


by:

These will go on out new camper to assist in levelling it from side to side and front to rear. I expect them to work the same as the ones on the old camper.




by:

Levels are great. Better than I expected. So I orders 2 more sets




by:

Great product, when these wear out will order again... thank you




by:

Just as described, good price and fast delivery.




by:

Levels are the same as the ones on my last camper. The liquid inside is just thick enough to make the bubble move just a little slower than water so they are stable. The sticky tape seems to hold nicely but I still used some glue to assist. Overall a very good item for the price.


Comments
Still working perfectly
Shawn - 10/13/2020


by:

These are inexpensive and easy to read from a distance which is what I was looking for. There are so many of these bubble levels on the market it was difficult to choose from online pictures. I used the supplied self stick adhesive tape to mount after leveling my camper and checking it with a level attached to the frame and not the camper itself. The bubble is fairly sensitive so mounting is a bit tricky with the tape as there is a bit of flex that the tape allows. I will use these to get the camper close but will also keep a small level with me when I travel.

If you're looking for a quick visual reference to you travel trailers state of level, these work well.




by:

Great price and fast shipping. I had these levelers on my old camper and I just had to install them on my new camper. It makes it so easy to level the camper as you know just how many inches of raise you need from side to side, and front to rear.


Comments
They are still working just fine and I still like them as much as the first day I put them on. It makes it real easy to estimate how many inches you need to raise or lower the camper.
Joe - 03/04/2015


by:

Exact replacement for my broken trailer level. As always, e-trailer has prompt shipping and quality products.


Comments
Product still functioning as designed. No complaints.
Ron I - 04/20/2016

25
221
Show More Reviews

See what our Experts say about this Hopkins RV Levels

  • How to Install the Hopkins RV Level # HM08525
    The levels in the Hopkins Graduated RV Levels, item # HM08525, are not specific to their mounting location. You will need to use a separate level to be sure the trailer is level, front to back and side to side, before installation and apply the levels with the bubble in the center position.
    view full answer...
  • Instructions On How To Install The Hopkins Graduated RV Levels, # HM08525
    On the Hopkins Graduated RV Levels, # HM08525, the level C is for front-to-rear level and can be installed on either side of the vehicle. The level 3 is for side-to-side level and can be installed on front or rear of the vehicle. Read both levels (C and 3) and add the two numbers. The total is the number of inches required to raise the lowest corner of the vehicle. The smallest of the two numbers is the number of inches required to raise or lower at the other corner on the low side.
    view full answer...
  • Best Place to Mount Hopkins Graduated RV Levels on Trailer
    There is no specific location where you mount the Hopkins Graduated RV Levels, # HM08525. Personally I would consider where I would be standing as I worked to make the RV or trailer level and I would place the levels in the most convenient place for that process.
    view full answer...
  • How to Attach Hopkins Graduated RV Levels # HM08525 to Leather-like Material in Class C Motorhome
    The Hopkins Graduated RV Levels # HM08525 can be mounted either with their self-sticking adhesive backs or by use of screws for semi-permanent installation. Since the self-sticking backs do not adhere to the faux leather fabric in your motor home you might consider using small screws or finish nails to mount them. It may be possible to make small holes in the fabric that will not be too visible if the levels are removed. You first might try testing this idea in an out-of-the-way location...
    view full answer...
  • What do the Numbers Indicate on Hopkins Graduated RV Levels # HM08525
    The numbers on the Hopkins Graduated RV Levels # HM08525 are just reference numbers and are not meant to indicate degrees or inches or feet. Basically it is a simple way to make sure the trailer is level on both sides. So if you are at 0 on one side and 2 on the other, in either direction, you know that one side is not level by 2. So you would want to get both to 2 or to 0 in that scenario.
    view full answer...
  • Will Adhesive Keep Hopkins Stick-On Graduated RV Levels in Place
    We haven't had complaints about using the included adhesive backing on level set # HM08525. If you do go with a different double-sided tape be sure to completely remove the existing adhesive. I do not foresee there being a problem but there is one thing that could cause anything that uses adhesive to loosen: heat. With a high enough temperature for a long enough period of time the adhesive will become more fluid and that could cause them to slip.
    view full answer...
  • Product Dimensions and Mounting Dimensions of Hopkins Graduated RV Levels
    I went out to the warehouse to take some measurements of the Hopkins Graduated RV Levels, Stick-On # HM08525 for you. I found the level to measure approximately 3-3/4 inches long x 1-1/2 inches wide. Without the height of the logo, the level is 1-3/8 inches wide. Where the level is skinnier, it is approximately 1/8 of an inch thick. With the thickness of the level, it is approximately 1/2 inch thick. The mounting holes are 2-3/4 inches apart on center. I confirmed with my contact at...
    view full answer...
    Image 1 for
  • What Length of Screw to Use and is Caulking Required to Isntall the Hopkins Graduated RV Levels
    The Hopkins Graduated RV Levels # HM08525 are about 1/2" thick and have mounting holes that are 5/16" in diameter. Since these can be mounting in a variety of locations just make sure that your screws are a bit longer than 1/2" are the correct material for your mounting surface. The tube that the bubble is in is actually sealed so there is no need to add caulk behind the unit for the installation. It wouldn't hurt anything but it isn't needed either.
    view full answer...
  • Recommended RV Leveler For Motorhome With Front Wheel Drive
    When needing to level your motorhome, I recommend the Andersen Camper Leveler, part # AM3604. These provide leveling from 1/2 inch to 4 inches and have a weight capacity of 30,000 lbs. You simply pull onto or back onto the leveler, and when you reach your desired height slip the chock under the leveler to hold it in place. The leveler and chock are sold as a single set of one of each part. The contacts at Andersen have confirmed that only one leveler is needed per axle. I have attached...
    view full answer...
  • Is The Camco AccuLevel Measured In Degrees Or Inches
    The Camco AccuLevel Trailer Bubble Level # CAM25563 is measured in degrees so that it will be compatible with multiple trailer sizes.
    view full answer...
  • Graduated Level That Can Stick-On Trailer
    While we do have the stick-on graduated levels, each of them are in the 3 to 4 inch range like you mentioned and there aren't any that are larger. So the trade off of getting something like the 10 inch Camco AccuLevel Trailer Bubble Level # CAM25563 is that you would have to screw it in. I can definitely understand now wanting to screw something into the outside of your trailer, so the only option for a stick-on graduated level is the Hopkins Graduated RV Levels # HM08525, or the Hopkins...
    view full answer...
  • Does Lippert Components High Speed Electric Stabilizer Trailer Jack # LC298707 Auto Level
    The Lippert Components High Speed Electric Stabilizer Trailer Jack # LC298707 does not auto level. It has an extend and retract button but does not have an auto level function. The only system we have that will auto level is the Ground Control 3.0 part # LC358590 which comes with landing gear jacks as well. To help you level with the # LC298707 you might be interested in the part # HM08525 which is a set of stick-on levels that you can watch as you make adjustments.
    view full answer...

Do you have a question about this RV Level?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv level information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Adam R
Expert Research:
Adam R
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Hayden R
Installed by:
Hayden R
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.