Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4
(205 reviews)
Price: $213.17
In Stock
Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4
Item # HSSF
Retail:$239.20
Our Price: $213.17
You Save: $26.03
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (205)
- Q & A (0)
- Photos
- Why etrailer?
Brophy Camper Tie-Downs - HSSF
- Front and Rear Tie-Downs
- Bed-Mounted
- Brophy
- Powder Coated Steel
- Universal Fit
Ready your truck to haul a camper with these sturdy tie-downs. Powder coated steel brackets securely clamp onto your truck's bed side rails.
Features:
- Tie-downs provide attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Neoprene pads protect your truck's paint
- Strong and durable steel construction
- Black powder coat finish is corrosion resistant
- Easy to install and remove
- Clamp each bracket onto the side of your truck bed
- No drilling required
- 4 Camper tie-downs with clamp plates, 12 neoprene pads, and necessary hardware included
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks
- External bed rail width cannot exceed 5-1/2"
- Requires at least 2" of space beneath lip of bed rail
- Not compatible with drop-in bed liners, bed rails, double-walled beds, or side-step beds
- Dimensions: 11-5/16" tall x 3" wide x 3/8" thick
- Distance between top mounting holes (center to center): 3-5/8"
- Distance from center of bottom mounting hole to center of top mounting hole: 8-9/16"
- Distance from center of top mounting hole to top of tie down lip: 1-1/4"
- Anchor width: 6"
- 1-Year limited warranty
Installation
Installing these bed-mounted camper tie-downs is simple. First, attach the T-bolts to the bottom interior portion of each tie-down. Place each tie-down on the rail of your truck so that the straight side faces the interior of your bed and the angled side faces the exterior. Adjust the T-bolts until each tie-down sits square on the rail. Then attach the clamp plates to secure the tie-downs to the rails. To do this, position the clamp plate beneath the lip of the side rail so that the lip is between the plate and the straight side of the tie-down. Then insert a carriage bolt on either side of the setup and tighten the nuts on the bolts until the tie-down is securely clamped onto the lip of your bed side rail.
Securing your Camper
In order to secure your camper to your truck bed, these tie-downs will need to be used in conjunction with a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper and to the tie-downs on your truck to keep your camper secure. Once you tighten the turnbuckles appropriately, you will be ready to haul your camper.
HSSF Camper Hold Down Black Powder Coated Finish (Qty 4)
Installation Details
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 - HSSF
Average Customer Rating: 4.6 out of 5 stars (205 Customer Reviews)
Ready your truck to haul a camper with these sturdy tie-downs. Powder coated steel brackets securely clamp onto your truck's bed side rails.by: Ed B.05/21/2019
Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.
Comments
No problems. Would buy again. Very easy to take on and off the truck.
Ed B - 05/22/2020by: Neil08/04/2021
Arrived on a rainy day with the box falling apart. Too much heavy steel to be loosely packed. Fortunately, the hardware bag was still there. Some bare metal showing. I had some emails with MacKenzie B. and they were responsive and without asking they offered me a 5% refund for the damage. After my first trip, they performed well on some very bumpy roads. Held strong and didn't move. I did have to re-adjust the lower standoffs after the first week. Taking them on/off is frustrating because the 2 nuts are in the small gap behind the clamp against the inner bed wall. Too tight for all but an open end wrench. 1/6 turn times too many fumbling tries, arg! Also, I was nervous not having a locking feature (lock washer, locknut, etc). I bought 8 locknuts (pinch type) and welded them to the inner plate. Then bought 8 round head hex bolts (grade 8). So now I can install easily with an Allen socket. See pictures. Recommend eTrailer consider this modification.
Comments
After my mount bolt mod, Ive used these multiple times and they are working great! Very stout and no visible marks on my F250 bed.
Neil - 08/05/2022by: Allen.08/22/2022
These wont work for my truck and camper. The box on a 2018 gmc 2500 short bed does not lend well to placement of these in order to get the correct geometry i needed for the tie-down points on my Palomino maverick 6601. I had high hopews of not having to buy the frame mounts, but i will have to.
Comments
The HSSF tie downs have specific fit parameters as mentioned in the product specifications above: External bed rail width cannot exceed 5-12 Requires at least 2 of space beneath lip of bed rail Not compatible with -in bed liners, bed rails, double-walled beds, or side-step beds
-- 
Mike L - 08/31/2022by: Pat03/20/2023
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for
a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads.
Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working.
Thank you etrailer for your super fast shipping and online product videos.
by: Bryce05/10/2022
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
by: Ron W07/02/2016
As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.
by: Matt04/14/2015
These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping.
Overall I am pleased with the quality and price
by: Roy10/09/2022
Well I ended up not useing these mounts. So I called etrailer and asked if I could return them, totally my fault, NOT etrailer at all. They were very very good about returning the product. I have bought products from etrailer before. They are good products, they dont sell junk. I dont buy junk either. I'll keep buying from etrailer. No I am not some kiss ass either. If they sell me some piece of [crap] product, I will send it back and tell they its a piece of [crap]. Keep life simple.
by: Chuck11/13/2012
Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.
by: captkirk02/15/2021
These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.
by: Bing09/23/2019
I received this tie downs on July, and first used it yesterday.
My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper.
The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.
by: Mike S05/23/2020
These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.
by: Daniel09/24/2022
Works good but 3 stars because the mounting screws rusted very bad. They should be galvanized or SS.
by: Regan06/25/2019
Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!
by: Andrew07/22/2021
If I could give a 3.5 out of 5, I would. These tie-downs serve their purpose, but definitely not recommended for a bigger camper. I would say my camper is average sized. These tie-downs hold my camper in place the majority of the time, some small movements when I'm on rough roads, but nothing too dramatic.
Negatives.
Two of the four lost the padded backing where the tie down meets the inside of the truck bed. Had to go buy some foam and create my own. They flex quite a bit with a camper the size of mine, wouldn't go down any rough roads.
by: Patrick04/02/2020
These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.
Comments
Still have not moved! Great design and cost savings.
Patrick - 04/06/2021by: Doug 02/05/2020
Ordered these for my new truck to hold my popup camper. As I haven't put them on yet because it's still winter, end of march it will be prepared to be put on. What I will say about customer service is there is nothing like it. Sent me emails updating everything and tracking. I did take a look at them and they look very heavy duty. I look forward to putting them on and gettin out to camping! I'll provide pictures once I get the chance of putting them on.
Comments
Working out great as expected.
Doug - 02/07/2021by: John05/25/2020
Easy to install and have done what’s expected. Keep the camper in place!!
by: Seth 01/25/2023
WORKS GOOD
by: JAMES K09/24/2012
ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE
by: Brent 08/08/2019
I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks.
The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something.
As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.
by: Jason S.06/05/2019
These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.
Comments
A year later & they still hold strong.
Jason S - 06/08/2020by: Jacob 07/02/2022
Well made brackets
by: Dan N.08/23/2013
The product is made from very good stock. They seem to be well built . I had a bit of a problem installing on my truck ,and ended up putting the bolts on the angled support rack in backwards according to the video , which I watched after . The tie downs have not been camper tested yet and I am excited to try them out!
Comments
The tie downs have worked fine for me . I have a smaller pop up pick up camper . I am sure for lighter campers they would work fine . I have seen the product work with two on the front as tie downs and then in the back , the button type bumper mounts in the back . This may be a good way to go for more stability on a larger camper. JMHO
Dan N - 02/21/2015by: D Gagnon05/14/2017
Could be happier took about 15 minutes to install can't wait to go camping
25
205
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- How Tight to Make # HSSF Turnbuckles for 1997 F-250 Carrying 9-Foot 2500-lb Slide in Truck CamperThe Brophy Camper Tie Downs # HSSF that you referenced do not carry a specific weight or torque capacity since this really is a consideration for the truck that is hosting the slide-in camper. The turnbuckle hardware included in this kit should be hand-tightened as much as you need to, but no tools should need to be used. My contact at Brophy pointed out that, as noted in the instructions that I have linked for you, the front holdowns should be positioned as far forward as possible on...
view full answer... - Will Brophy Camper Tie Downs HSSF Fit a 2000 Dodge DakotaThe Brophy camper tie downs # HSSF do not have a specific truck fit list, just some possible exclusions. They will not fit the following: Will not fit step side beds or some double-wall beds Will not fit some Dually beds Will not fit some import trucks Will not fit 2004-2008 Ford F-150 Pickups Your 2000 Dodge Dakota does not fit into these categories so you would look at the video review and instructions linked to the right and compare them to your truck bed to determine if they will...
view full answer... - Will Camper Hold Downs HSSF Fit a 2010 Dodge RamMy contact at C.R. Brophy let me know that though they have not been able to test the # HSSF camper hold downs on the 2009 or 2010 Dodge Ram models, they should still be a fit for your truck. You will want to check, however, that your vehicle manual does not state that you would be unable to use sidewall type camper hold downs.
view full answer... - Will the Camper Hold Downs, # HSSF, Fit on a 2005 GMC SierraThe Camper Hold Downs, # HSSF, will work on your 2005 GMC pickup. These hold downs wrap around the truck bed rails and are mounted inside the bed. They do not fit in the stake pockets. These hold downs will work for any camper that is a correct fit for your vehicle. To install, first place the protective tape under the rest plates and on the T-Bars. Next, thread the T-Bar into the nut at bottom of each Holdown. Then place the front two Holdowns as forward as possible on rail of your truck...
view full answer... - Will the Camper Hold Downs, # HSSF Work on a 2009 Chevy Silverado 3/4 Ton PickupThe Camper Hold Downs, # HSSF, will work on your 2009 Chevy Silverado 3/4 Ton pickup. These hold downs wrap around the truck bed rails and mount inside the bed. They do not fit in the stake pockets. These hold downs will work for any camper that is a correct fit for your vehicle.
view full answer... - Will Brophy Camper Hold Downs Fit a 1997 Dodge Ram 1500 Pick Up TruckThe Brophy Camper Hold Downs, part HSSF, will fit your 1997 Dodge Ram 1500, as long as it does not have a stepside bed. They are a universal fit item and will fit most full size pick up beds as long as they are not stepside or Dually models.
view full answer... - Will the Camper Hold Down Black Powder Coated Finish Qty 4, # HSSF Fit a 2009 Chevy SilveradoYes. The Camper Hold Down Black Powder Coated Finish (Qty 4), # HSSF, will fit your 2009 Chevy Silverado. You should not have to modify the truck or camper for installation. The hold downs wrap around the truck bed rails and mount inside the bed. They do not fit in the stake pockets. These hold downs will work for any camper that is a correct fit for your vehicle. To install, first place the protective tape under the rest plates and on the T-Bars. Next, thread the T-Bar into the nut at...
view full answer... - Will Camper Hold Down Black Powder Coated Finish (Qty 4), # HSSF Fit a 2003 Dodge Ram 3500The Camper Hold Down Black Powder Coated Finish (Qty 4), # HSSF, will fit your 2003 Dodge Ram 3500. There is not weight capacity rating for these hold downs and they are designed to work for any camper that is a correct fit for your vehicle.
view full answer... - Can I Use # HSSF Camper Hold Down Brakets in My 2000 Dodge Ram for my 11-1/2 ft Camper ShellThese Camper Hold Down, part # HSSF, are universal fit items made to fit most trucks. These hold downs wrap around the truck bed rails and are mounted inside the bed. Like other products, they do not fit in the stake pockets. Some dual rear wheel beds interfere with installation of the hold downs. You will want to check, however, that your vehicle manual does not state that you would be unable to use sidewall type camper hold downs. Otherwise, these should work well to secure your 11-1/2...
view full answer... - Compatibility of Brophy Camper Tie Down # HSSF in a 2010 Dodge Ram 1500These Brophy Camper Tie Down, part # HSSF, are universal fit items so they would work on your 2010 Dodge Ram 1500. There is not a weight capacity on these hold downs either, and they should work on any camper that is a correct fit for your vehicle.
view full answer... - Will Camper Hold Down, # HSSF, Fit a 2011 Ford F-250 with Spray-In BedlinerI went out to the warehouse and pulled a Camper Hold Down, # HSSF, to measure so you could compare the measurements to your truck to determine fit. The hold down will go around a bed rail that is no wider than 5 inches. The top part of the hold down is 6 inches wide while the bottom, more narrow part is 3 inches wide. The top 2 bolt holes are 3-5/8 inches apart on center. It has an overall height of 11-3/8 inches. A spray-in bedliner will be fine. Slide in bedliners would have to be trimmed...
view full answer...
- Will the Brophy Camper Hold Downs # HSSF Work on a 2006 Crew Cab Chevy SilveradoYes, these Brophy Camper Hold Downs # HSSF would work on your 2006 Chevy Silverado Crew Cab truck to secure your sportsmen 1600 lb 8 ft camper. These hold downs do not have a weight capacity and will work on virtually any camper that is designed to fit the bed of your truck.
view full answer... - Will the Brophy Camper Hold Downs # HSSF Fit on a 2010 Ford F-150The Brophy Camper Hold Downs, # HSSF, should work well with your 2010 Ford F-150. I spoke with my contact at Brophy and she has not had any complaints of a fit issue since Ford changed the design in 2009. To be absolutely certain that these hold downs will fit your truck, I recommend looking at your truck bed. I can tell you that you will need at least 2 inches of space under the top of the truck bed side wall for the hold downs to fit properly. Some trucks will have double walls near...
view full answer... - Will Brophy Camper Hold Downs # HSSF Work on a 2013 GMC Sierra 2500 with Rhino Bed LinerThe Brophy camper hold downs # HSSF can be used with spray-in bed liners but drop in bed liners would have to be trimmed. If you do not want to trim then going with custom fit frame mount brackets is the way to go. I included a link to the main page for these brackets for your truck. You will need to use the drop down menu near the top of the page to Select Vehicle Style for the proper configuration of your truck to get the right ones.
view full answer... - Will Camper Hold Down # HSSF Fit a 2011 Ford F-350I went out to the warehouse and pulled a Camper Hold Down, # HSSF, to measure so you could compare the measurements to your truck to determine fit. The hold down will go around a bed rail that is no wider than 5 inches. The top part of the hold down is 6 inches wide while the bottom, more narrow part is 3 inches wide. The top 2 bolt holes are 3-5/8 inches apart on center. It has an overall height of 11-3/8 inches.
view full answer...
- Will Brophy Camper Hold-Downs # HSSF Fit 2013 Nissan Frontier Pickup TruckI spoke with my contact at Brophy about your 2013 Nissan Frontier truck. They told me that they do not do a test fit of the Camper Hold Down, part # HSSF, other than on domestic trucks so they would not say they would fit or would not. They also said that it requires a minimum of 2 inches underneath the bed rail for installation. I have attached a link to an installation video for this hold-down you can check out.
view full answer... - Will the Brophy Camper Hold Downs Work on a 1997 Chevy Silverado 1500If you have a slide-in or drop-in bed liner you may need to trim it for the Brophy Camper Hold Downs # HSSF to work. If you have a spray-in bed liner it should work regardless. Check out the picture I attached to see what kind of clearance you will need on your bed rails for this product to work on your 1997 Chevy Silverado 1500.
view full answer...
- Will the Brophy Camper Hold Downs # HSSF Work on a 2011 GMC 2500HD with a 1200 lb CamperYes, these Brophy Camper Hold Downs # HSSF would work on your 2011 GMC 2500 HD Denali crew cab with a 6 ft bed to secure your 1,200 lb camper. These hold downs do not have a weight capacity and will work on virtually any camper that is designed to fit the bed of your truck.
view full answer... - Brophy Camper Hold Down Recommendation for a 2004 Chevy 2500 HD with an 8 ft Slide-In CamperThe Brophy Camper Hold Downs, item # HSSF, should fit on your 2004 Chevrolet Silverado 2500HD to secure your 8 foot slide in camper. This is one of the best ways to secure campers in the bed of a truck. If you check out the product reviews you can see that many customers are very satisfied with this product.
view full answer... - Availability of Camper Tie Downs for 2012 Ram 3500 DuallyThe fit of the HSSF bracket will depend on the sidewall construction of your truck bed. Take a look at the provided photo. In the center panel, you can see that the bracket attaches under the lip of the truck bed, and the foot meets the inside of the truck bed in a raised area. My contact at CR Brophy, the manufacturer of the tie downs was unable to tell me if these particular tie downs would work with your truck. There might possibly be a Tork Lift system that would work for you. If you...
view full answer...
- Camper Hold Down Availability for a 2006 Chevy ColoradoI spoke with my contact at Brophy and she informed me that the Brophy Camper Hold Downs # HSSF should work for you, but you will need to check your owners manual to determine the recommended method for attachment and weight capacity for a camper. She also informed me that you can not use the # HSSF if you have a slide-in bedliner, and that you will need a bed rail with at least a 2 inch lip.
view full answer... - Weight Limit For Brophy Camper Hold Down # HSSF On 1995 Ford F-250 LongbedAfter speaking to my contact at Brophy, she informed me the Brophy Camper Hold Down # HSSF technically does not have a weight range. This product is limited only by the weight capacity of your 1995 Ford F-250, so you will need to consult your vehicle owners guide to find the weight limit of your cargo bed. You will also need to ensure there is at least 2 inches of space between the truck bed interior wall and the lip of the bed in order for the hold downs to fit properly. I have included...
view full answer...
- Will Brophy Tiedown Part # HSSF Work With a Cabover Camper on a 2005 Dodge Ram 2500We do offer Brophy tiedowns that will fit your 2005 Dodge Ram 2500 as long as it does not have a stepside bed or dual rear wheels. The Brophy tiedowns that will work for your application is part # HSSF. By using these tiedown brackets, you will not have a need for further reinforcement. These universal brackets wrap around the bedrail rather than using the stake pockets and include both the front and rear brackets. I have attached the installation instructions for you. If you need the...
view full answer... - Will the Brophy Camper Hold Down # HSSF Work on a 1998 Ford F-150The Camper Hold Downs, part # HSSF, may work on your 1998 Ford F-150. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. There is no weight capacity rating on the hold downs and they will work for any camper size that is properly sized for your vehicle. I added a picture of this product loosely installed on a truck bed to show you how it fits. The Camper Tie Down Hardware Package, item # TDHP is recommended for use with these camper...
view full answer...
Do you have a question about this Camper Tie-Down?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate camper tie-down information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video Edited:
Zack K
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Rachael H
Updated by:
Amanda M
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.