bing tracking image
  1. Hitch Adapters
  2. Brophy
  3. Hitch Expander
  4. Fits 1-1/4 Inch Hitch
  5. 7 In Extension
  6. 1-1/4 Inch to 2 Inch
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise

Item # HT5R
lowest price pledge
Retail:$127.69
Our Price: $120.73
You Save: $6.96
Hitch Adapters
This item qualifies for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
1-800-940-8924 to order Brophy hitch adapters part number HT5R or order online at etrailer.com. Free expert support on all Brophy products. Guaranteed Lowest Price and Fastest Shipping for Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise. Hitch Adapters reviews from real customers.
  • All Info
  • Reviews (170)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Brophy Hitch Adapters - HT5R

  • Hitch Expander
  • Fits 1-1/4 Inch Hitch
  • 7 In Extension
  • 1-1/4 Inch to 2 Inch
  • Bike Racks
  • Cargo Carriers
  • Brophy


Features:

  • Convert any 1-1/4" (Class I and II) receiver to a 2" receiver (not to be used for towing or with snow plows)
  • Powder coated black finish
  • Extends 7" and raises 5-1/2"
  • 1-1/4" shank is solid
  • 2" shank is hollow
  • Maximum tongue weight: 300 lbs
  • Made in the USA


Note: Tongue weight capacity of hitch will be reduced by 50% with use of adapter



HT5R Brophy Trailer Hitch Receiver Adapter





Video of Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Brophy Hitch Adapter Review

Today we'll be taking a look at the Brophy Hitch Adapter, 1 1/4 to 2 inch trailer hitch receiver with a 5 inch rise, part number HT5R. The Brophy Hitch Adapter is going to allow you to convert your Class I and II 1 1/4 inch receiver to your 2 inch receiver, allowing you to use any 2 inch accessory. It offers a 5 inch rise, giving us more ground clearance here at the rear of the vehicle for our accessories. We're using a cargo carrier with our adapter here today, but it's also going to work great for your bike racks or any other 2 inch accessories. Now please keep in mind when using this adapter, it does cut your tongue weight capacity in half. It is not recommended for towing use, so no ball mounts. This is a much more economical solution than having two bike racks or two cargo carriers for multiple vehicles and it's definitely cheaper than purchasing a different hitch.

In addition to the rise, it gives us a 7 inch extension. It's also made out of a sturdy steel construction with a black powder coat finish, so it's going to stand up to the elements. It has a 300 pound weight capacity. It's an extraordinarily easy installation. We've got our adapter plugged into our 1 1/4 inch receiver and our accessory plugged into our adapter. The pin and clips are sold separately from the hitch adapter, so you'll need to pick some up here at etrailer.com.

Here at the adapter end, we've got a PC3, this is going to be our 5/8th pin and clip. Here at the hitch end, we've got a PC2, that's going to be our 1/2 inch pin and clip. That's going to complete our look at the Brophy Hitch Adapter, 1 1/4 to 2 inch trailer hitch receiver with a 5 inch rise, part number HT5R.


Customer Reviews

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise - HT5R

Average Customer Rating:  4.7 out of 5 stars   (170 Customer Reviews)


by:

For being so expensive, you would think it would be better quality. It’s not aligned properly and when i attach my bike rack, it’s crooked. Second, the weld was sloppy and had extra solder. So much so, that i couldn’t push it into the hitch far enough to get the pin in. I had to remove some solder do it would fit properly (all the way in so i could put the pin in). The adapter was almost as expensive as the hitch.



by:

Perfect Fit for my 2017 Prius. Instruction video was a great help. I’ve only purchased all my towing needs from Etrailer.com never been disappointed with their product and services. Thanks again.



by:

Because of low ground clearance I bought this high 5" high rise for my carrier that I bought from you all and it worked great. I loved the ability to walk between the carrier and trunk. The high rise is easy to install. We had absolutely no issues on our 3000 mile round trip journey. The hitch, high rise and carrier were all purchased from you.


Comments
This product is made of superior material. We love this product as we do all the products we buy from you and your customer service is the best. Thank you
Sherry C - 10/22/2017


by:

Working out well. Just used it on a week long vacation with my b III e rack that holds 4 bikes. Been able to avoid bottoming out.

My only comment would be that the black paint has worn off pretty quick after one New England winter.
Working out well. Just used it on a week long vacation with my b III e rack that holds 4 bikes. Been able to avoid bottoming out.

My only comment would be that the black paint has worn off pretty quick after one New England winter.



by:

Purchased this for my 08 Honda Fit so that my 1.25" hitch could fit my 2" Bike Rack. Hitch Adapter was easy to install, however, I recommend also purchasing a hitch clamp. There was a bit of play between the adapter and the hitch, but that's expected. Adapter is well made and should last a long time. Only "issue" I had was the labels. I recognize everyone needs to advertise/market themselves but it would be nice to have a clean part without all the labels on it. Nothing a blade and goo-gone can't fix.



by:

I bought this adapter so that I could mount a bike rack on the back of my 2012 Honda Civic. The adapter got the bikes high enough so that they wouldn't hit the pavement when backing out of my driveway and transitioning to the street. The product is definitely strong and well made. It was put to the test with a very heavy steel thule bike rack that was definitely heavier than all 4 of the bikes that were mounted on it. The fit was precise so it didn't hit my rear bumper as well.



by:

Thank you for the personal touch on the order. Not many company's do this. This is a good product and a good price.

My car sits low and we needed to raise the carrier up. Looks like this will work out.


Comments
The carrier is still working out great for me. I still cant leave the house alone. I have even recommend this to a friend and he also bought one.Thank you again for a good product.
Keitha Y - 01/05/2015


by:

This well-made adapter is ideal for the 2016 Mazda Miata because it provides significant clearance for Curt Manufacturing's folding aluminum cargo carrier and remains 1 1/4" away from the rear license plate. I've already used this rig several times in several days (lawnmower, luggage, packages to be shipped) and it works great. Along with this fantastic product is fantastic service from the eTrailer.com team. Friendly, helpful, responsive. I couldn't ask for anything more, and recommend both this product and its distributor highly.



by:

We just wanted to tell you how much we appreciated your customer service. We were called Sunday evening, the day after Christmas, and told that the clip my husband had ordered wouldn't work with the other parts.
#1 We were surprised that anyone would be working the day after Christmas on a Sunday evening.
#2 A real person was looking at the order and realized the components ordered wouldn't work together.
#3 The real person called and corrected the ordered parts.
In these days of having to work our way through phone keyboard selections and live chat with computers, it was refreshing to have an actual person catch the problem ahead of sending us an unworkable element, calling us about it, and correcting the problem. We're leaving for FL for the winter on Friday and are planning on taking our bikes. The wrong part would have made our hitch unusable, thus forcing us to leave the bikes at home. With no time to order and receive the correct part, your employee helped to make our winter more enjoyable. Thank you so much.



by:

This works GREAT when we use our Segway PT Double Carrier on the back of our Class C RV. This VERY STURDY hitch height adapter allows us to deal with the extra receiver height on the RV and get the hitch tube down to a normal level. We send all of our Segway PT Carrier customers to etrailer.com to purchase hitch height adapters for their rigs when hitch height is a problem or, for hitches when they don't yet have a hitch on their vehicle. The folks at etrailer.com are just like family when speaking with them on the phone.



by:

High Quality Product, received super fast. Clearly a company interested in providing service and a high quality product!



by:

the adapter is well made but i should have measured the clearences between the bumper and the hitch, it was about 6" to short so i ordered an estension to make up the distance



by:

Great adapter to be able to use a 2" 1Up bike rack in my 1.25" receiving hitch and gains 5" of elevation to help keep it from dragging over uneven terrain. I drive a 2019 Honda Accord Hybrid.


Comments
Still loving this adapter and my set up!
Frederickquirante - 05/11/2021

by:

08' Honda CrV w/5" Brophy Hitch Riser

Awesome product with ultra fast int'l shipping to Canada next spor from etrailer. I read reviews, watched videos and studied the 360 degree measurements and dimensions as the tolerance on my CRV was tight. Prepared to grind or shave down the unit to clear my bumper I was astonished to fit it on and have 'just enough clearance'. I have a Class 1 hitch by Curt which is recessed more deeply than other brands.

" />

by:

This works great with Ford Focus hatch back. It was easy to install love it !



by:

Perfect for my 2015 honda fit
It helped
a lot by adding that 5 inch rise
No more scraping on the driveways or dips.
I highly recommend to anyone that owns or is planning to buy a cargo hitch basket those who own a smaller car.



by:

Works ok. The dimensions of the receiver (female) are a bit large. So the bike rack I purchased rattles & sways to-and-fro when mounted. I attempted to place some wood shims in the adapter to minimize this occurrence, but was unsuccessful.


Comments
To help prevent sway and rattle of your bike rack in the 2 inch hitch receiver, an anti-rattle device like the Roadmaster Quiet Hitch # RM-061
Roadmaster Quiet Hitch for 2" Trailer Hitches
$33.74
is a great solution.
-- Etrailer Expert Victoria B - 08/23/2019

by:

Definitely recommend this adapter if you drive a low profile vehicle and need a little clearance when approaching driveways and or speed bumps.



by:

I was hunting the web for a trailer hitch that would work with my Ford Fiesta and my handicap rack that wouldn't scrap the road or driveways and intersection.
I came across the Hitch Adapter from e-trailer.com. So I ordered the product.
Was so excited when the hitch arrived and took it to my welding shop to have custom adjustment for my bumper. For the first time since April 1, 2018 when my handicap rack arrived it didn't drag the pavement.
I am so excited and would love to have all of you know how wonderful the service from this company as the hitch even arrived a day early.
WTG guy on your service........



by:

My son in law and I installed the hitch this morning. No big problem after we figured out the wire threading thing. The adapter holds the Yakima bike rack well off the ground and works well. The Draw-tite seems like a good product. I'm very pleased with my purchase.



by:

The only thing I had to cut my bumper so it would fit. The extension on the 1 1/4 only extended 31/2 “” now t 7 as advertised.



by:

I received my trailer hitch adapter today on time as promised. I tried it out on both cars ( 2009 hyundai elantra and 2013 hyundai sonota . It works well by clearing the bumpers and raising the hitch 4 or 5 inches that i was trying to accomplish. I use the hitch for a bike rack and it was too low to the ground.My hitch is a 1-1/4 that the HT5R converts to a 2 inch but my bike rack also had an adapter to 2 inch, so it works perfect. I had talked to customer service prior to buying and they steered me in the correct direction and i am pleased to solve this problem.


Comments
The hitch raiser-upper is doing very well and has made a couple trips to Florida on one car and the other a bunch of trips to bike trails and our get away cabin. There are no problems but id like to see a solution to the receiver being tighter fit when slid into with the adapter. I know it has to go in easily but was thinking of putting some steel shims in to tighten it. It has not been a problem but i thought it would be good to cut down any play or sway while on the road . Thx for the follow up
Rich - 01/06/2018


by:

works well, you can find it for %xx less as other BIG online outlets that start with a ....


Comments
If you find the same item with free shipping elsewhere, we would be happy to price match it! View our policy here:
-- Etrailer Expert Sierra K - 11/19/2021

by:

I've had this adapter for nearly 1.5 yrs now and it has been the best solution to use a 2" hitch bike rack on a small vehicle. It's incredibly sturdy and durable (backed up into a few parking curbs over the last 1.5 yrs when the rack wasn't on, but no dents to prove it). One drawback is the bit of wiggle between the hitch and the adapter, but if you have a local shop that can weld them together, then you're all set. Definitely recommend!

This was used on a 2012 VW Golf 2 door hatchback, base model.

I traded my car in today for another model, so apologies I don't have photos to share!


Comments
Another option for easily removing the wiggle between your 1-1/4 inch trailer hitch and hitch adapter is an Anti-Rattle Device like the Roadmaster Quiet Hitch # RM-061-125
Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
$33.22
.
-- Etrailer Expert Victoria B - 05/12/2020

by:

Rating: Excellent
Have a 2018 Honda
CRV , had a hitch put on. My carrier set to low . The hitch was a 11/4 to 2 inches . The adapter that I bought from you was perfect. Made it set higher was perfect.


25
170
Show More Reviews

Ask the Experts about this Brophy Hitch Adapters



  • Distance Between Hitch Pin Holes on the Brophy Hitch Adapter part # HT5R
    The distance from the back of the 2 inch hitch opening of the Brophy Hitch adapter part # HT5R back to the center of the hitch pin hole on the 1-1/4 inch shank is 3-3/8. I attached a picture where that dimension has been added as well.
    view full answer...
    Image 1 for
  • Weight of Brophy 1-1/4 to 2 Inch Hitch Adapter # HT5R
    The weight of Brophy adapter # HT5R does weigh approximately 5 pounds. The MaxxTow adapter MT70355 (discontinued) had a bit more steel, longer shank, and a collar around the receiver opening so it is actually closer to 8 or 9 pounds minus packaging. Please note that the Brophy model works with Class I and II hitches whereas the MaxxTow model only works with Class II hitches.
    view full answer...
  • Tongue Weight Capacity of the Brophy 1-1/4 to 2 inch Hitch Adapter # HT5R
    The maximum tongue weight of this adapter is 300 pounds. Please be aware when using any hitch adapter the tongue weight capacity of your hitch will be decreased by 50 percent. According to Brophy, the Hitch Adapter 1-1/4 to 2 inch Adapter # HT5R the weight capacity of the adapter will exceed the weight capacity of the 1-1/4 inch hitch. Therefore the capacity of the hitch will be the limiting factor. For example if the hitch has a tongue weight capacity of 300 pounds then the hitch adapter...
    view full answer...
  • Can Hitch Adapter # HT5R Be Used to Lower Hitch Height for Bike Rack
    Yes you could use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise # HT5R in the drop position which will allow your bike rack to sit lower but you should note that using this adapter does cut the tongue weight capacity of your hitch by 50 percent.
    view full answer...
  • 1-1/4 Inch to 2 Inch Hitch Expander With Rise for a Bike Rack
    The closest part we have to what you're looking for is the Brophy Trailer Hitch Adapter, 1-1/4 inch to 2 inch with a 5 inch raise, part # HT5R. This will adapt your Class I or II 1-1/4 inch receiver to a 2 inch receiver that's raised just a bit. Keep in mind using this hitch adapter will reduce your tongue weight capacity by 50%, limiting the number and amount of bikes you can put onto the rack.
    view full answer...
  • Hitch Adapter For 1-1/4 Inch Trailer Hitch
    We do carry trailer hitch ball mounts that have a rise and fit 1-1/4 inch trailer hitches. I have attached a link to our product page for the 1-1/4 inch ball mounts we offer. We also carry adapters that will fit a 1-1/4 inch trailer hitch, but for any adapters with a rise they are all 1-1/4 to 2 inch adapters. We do not offer any that are 1-1/4 to 1-1/4 inch.
    view full answer...
  • Availability of 1-1/4 inch to 2 inch Adapter with 5 inches of Rise
    The Brophy part # HT5R has a 5 inch rise and is a 1-1/4 to 2 inch adapter like the discontinued MT70355 that you referenced so it would be what you would need.
    view full answer...
  • Recommended Hitch Adapter For 5 Inch Rise On Class I Hitch Receiver
    For your 2016 Audi A4, I recommend the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise # HT5R. This will give you the additional ground clearance you need but will reduce the tongue weight capacity of your hitch by 50%. You will also need to use the 2 inch adapter on your bike rack.
    view full answer...
  • Availability of Adapter for 1-1/4 inch Hitch that Gives a Rise 2 inch Hitch Opening
    We do have the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise # HT5R which fits 1-1/4 inch hitches and then gives you a 2 inch hitch opening 5 inches higher. This appears to be exactly what you would need but you have to keep one thing in mind. These adapters cut the capacity of the hitch they are installed in by 50 percent due to the added leverage and movement.
    view full answer...
  • Hitch Adapter for Travel Trailer to Allow Use of 2-Inch Cargo Carrier
    We do not offer hitch adapters for 1-1/2-inch hitches. You may want to re-check your measurement to be sure since the 1-1/4-inch Class I or Class II hitches are far more common on travel trailers. The linked article will be helpful. If you do have a 1-1/4-inch hitch you can use an adapter like # HT5R from Brophy which will give you additional ground clearance thanks to its 5-inches of rise. But please note that like all hitch adapters it will cause a 50-percent reduction in your hitch...
    view full answer...
  • Hitch Adapter Recommendation that Gives Hitch Opening Additional Rise for Ground Clearance
    It sounds like you are looking for the part # HT5R which is designed to fit in a 1-1/4 inch trailer hitch and provide a 2 inch opening 5 inches above where the hitch installs. You should note that these adapters end up cutting the capacity of the hitch they are installed in by 50 percent.
    view full answer...
  • Availability of Hitch Rise Adapter for Class I Hitch that Provides 2 inch Hitch Opening
    We have a similar hitch adapter to the MT70355 (discontinued) that you referenced that is compatible with Class I hitches but this adapter can only be installed in Class II hitches. Instead you would want the Brophy part # HT5R which is Class I compatible.
    view full answer...
  • Length of Shank on the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HT5R
    The dimension you are looking for is 4-3/4 inches.
    view full answer...
    Image 1 for
  • Recommended Hitch Expander with 5 Inch Rise
    To expand the 1-1/4 inch receiver opening on your 2013 VW GTI, while also giving you a 5 inch rise, I recommend the Brophy Hitch Adapter # HT5R. This adapter will give you exactly what you are needing, converting the 1-1/4 inch receiver on your vehicle to a 2 inch opening to be compatible with your Thule bike rack, along with providing you with a 5-1/2 inch rise from the top of the shank. Please just keep in mind that when using this or any other hitch adapter, the tongue weight capacity...
    view full answer...
  • Recommended Hitch Adapter With Rise For 2011 Dodge Grand Caravan
    Using any hitch adapters in the trailer hitch on your Grand Caravan will reduce the trailer hitch capacity by 50 percent. From my research I found that you may have a Class ll or Class lll trailer hitch and it could have a 2 inch or 1-1/4 inch receiver opening. We do not offer an adapter with a 1-1/4 inch receiver opening that fits 1-1/4 inch trailer hitch receivers. We do have adapters that fit a 1-1/4 inch trailer hitch and has a 2 inch receiver opening. For a 5-inch rise you could...
    view full answer...
  • Will the Brophy Hitch Adapter 1-1/4 Inch to 2 Inch With Rise Clear My Rear Bumper
    In order to determine if the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise part # HT5R will require trimming of the rear bumper you will need to measure from the center of the hitch pin hole outward to the rear edge of the bumper fascia. This measurement will need to be no more than 3-5/8" in order for the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise to clear the rear bumper. I have attached a photo to assist with the above but I don't have any measurements...
    view full answer...
    Image 1 for
  • Recommended Hitch Adapter for Raising Bike Rack that is Compatible with a 1-1/4 Bike Rack and Hitch
    It sounds like you are looking for an adapter like the Brophy # HT5R which provides you with a 5 inch rise. To make these adapters 2 inch raised opening fit the 1-1/4 bike rack shank you will need to use a reducer like the Brophy # HT02. It's important to note that when you use an adapter like the Brophy # HT5R that you will reduce your carrying capacity by 50% so if your hitch carries 200lbs tongue weight you will be reduced to 100lbs. I have linked the above mentioned products to...
    view full answer...
  • Solution for Adding Ground Clearance for Bike Rack on 1-1/4 Inch Hitch Receiver
    I do have a solution for you, however there is not a high-low adapter like what you were looking at that is compatible with 1-1/4 inch hitch receivers. If you are needing a rise from your hitch to provide more ground clearance for your Thule bike rack, I recommend taking a look at the Brophy Hitch Adapter # HT5R. This will slide into the 1-1/4 inch receiver on your 2016 VW Passat and it features a 5 inch rise. The 2 inch opening that it then provides on the other end can be taken back...
    view full answer...
  • Adapter to Raise a 1-1/4 Bike Rack in a 1-1/4 Hitch
    We do have a solution for you. Although there is not an adapter created specifically for your need, you can purchase a hitch adapter like Brophy's # HT5R. As you mentioned, this will go from a 1-1/4" to a 2" receiver. To solve that problem, you will need to purchase an adapter sleeve like # HT02 which transforms the 2" receiver into a 1-1/4". There is something you will want to keep in mind when using an adapter on your hitch. Using an extender like this will reduce the tongue weight...
    view full answer...
  • Trailer Hitch Adapter with Rise and 2 Inch Receiver for a 1-1/4 Inch Trailer Hitch
    There is something similar to MaxxTow adapter MT70070 that fits 1-1/4 inch hitches instead of 2 inch hitches. Take as look at the Brophy adapter, # HT5R. It fits a 1-1/4 inch Class I or II hitch and has a rise with a 2 inch receiver on the top. An adapter that features 2 receivers though is not available for a 1-1/4 inch hitch. Please note the use of an adapter will reduce the tongue weight capacity of the hitch by 50 percent. It will also put more stress on the hitch and vehicle.
    view full answer...
  • Availability of Hitch Adapter to Increase Height of Hitch-Mount Motorcycle Carrier
    Use of any hitch adapter, such as the Brophy # HT5R, will have the unavoidable side-effect of cutting your hitch's tongue weight capacity by 50-percent. In the case of most vehicles suitable for transporting 2 motorcycles on a dedicated carrier, this reduction in hitch capacity will mean that the weight of the carrier and motorcycles could exceed this reduced capacity. This could lead to damage to the hitch, the vehicle, and/or both of the loaded motorcycles. Since I do not know what vehicle...
    view full answer...
  • Hitch Adapter Recommendation and How to Tell If Trailer Hitch is Class I or Class II
    Both Class I and Class II trailer hitches have 1-1/4 inch receiver openings. The particular class rating should be listed somewhere on the trailer hitch that is installed on the 2003 Ford Escape. If you cannot find the class rating, there should also be a tongue weight and towing weight capacity listed on the hitch. A Class I hitch will typically have a tongue weight of 200 pounds and towing weight of 2,000 pounds. A Class II trailer hitch will be higher rated and usually have a 525 pound...
    view full answer...
  • Compatibility & Effect of Using Hitch Adapter in Class I Hitch
    A Class I hitch like Draw-Tite part # 24622 which fits your 1990 Suzuki Sidekick must be used with only Class I-compatible accessories. This includes items like bike racks and hitch adapters. There are some 1-1/4-inch hitch adapters that will not work in a Class I hitch, only in a Class II. But we do offer several that will, and these are shown on the linked page, including part # HT5R. Do please note that use of any hitch adapter will cause you to lose half of your hitch's rated capacity....
    view full answer...
    Image 1 for
  • Fit & Compatibility of Brophy Hitch Adapter 1-1/4 to 2 Inch on a Draw-Tite Trailer Hitch
    The Draw-Tite # 24769 hitch is confirmed to fit your 2007 Dodge Caiber as long as it isn't an SRT-4 model. The Brophy hitch adapter # HT5R will fit into the Draw-Tite hitch but it will reduce the tongue capacity of your hitch by 50 percent. Which will then limit you to only 100lbs of tongue weight. Depending on the weight capacity of your Caliber it could be less. You will want to check the placard on the inside of your drivers door or your owner's manual (page 257) to see what your...
    view full answer...


< Previous
123. . .9



Do you have a question about this Hitch Adapter?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality hitch adapters for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch adapter information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jacob T
Video Edited:
Jacob T
Employee Adele M
Updated by:
Adele M
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.