To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we will be taking a look at the Inno roof rack system for factory track rails. The stays are available with part number INTR and the bars are available in a variety of lengths. See our website for the length that will work best for you. The Inno roof rack system is going to allow us to carry Inno as well as other accessories on top of our vehicle such as kayak carriers, roof mounted cargo baskets, and bike racks. The square profile crossbars are made of a hardened steel with an elastomeric coating and they come in eight lengths ranging from forty-two to sixty-five inches. The crossbars come in a pair including the end caps to keep grime and debris from getting inside.
The crossbars are held in place by Inno's versatile stay. Now this particular model is designed to fit on the factory track rail systems. The stays also feature a locking mechanism which is designed to cover up our hardware, that way it can't be tampered with. Now this Inno roof rack system has a max weight capacity of a hundred and forty pounds, but keep in mind it's going to be limited to your vehicle's roof capacity which you can find in your owner's manual. Now Inno recommends a crossbar spread between nineteen and five-eighths inches and thirty and three-eighths inches. You can adjust these depending on your load length. Now that we've gone over some of the features, I'll go ahead and show you how to put it together and install it on our vehicle.
We've already got the rear in place so we can go ahead and finish this one. We've got our crossbar, we've got our two stays designed to fit with our factory track rail, and then we've got our fit hooks that are specifically designed for our vehicle. You can find your specific vehicle on our website at etrailer dot com. So first thing we'll do is we'll grab one of the stays. We'll take our keys and we're going to need to remove the cover. That's going to reveal where our hardware goes.
Then we'll take this portion of our fit hook and put it underneath and then we're going to take two screws. We will want to line it up with the holes there of course. We'll take two screws, put those through the top just to keep it in place. So it'll look like that. Then we'll take one of the hooks, we'll put it underneath and go ahead and screw that on a little bit.
Now when it fits into our track rail, on top of our vehicle, it's going to be in this position and I'll show you how this works when we get it up there. So let's go ahead and put this other hook in place. All right, then we can put the other one together. So now we'll take our stay with the fit hooks installed and then we're going want to set that on our track rail and it's going to sit on the inside and the outside portion of it. Then once we got it in there, we'll take our included Allen key and we'll tighten that down a little bit. We don't want to tighten it all the way down just yet but just enough so it's not going to come back out. Then we can repeat that same step on the other side. Now with those two stays in place, we'll grab our crossbar and we'll just feed it through meeting with the other side. We'll come over here and we'll finish receiving the crossbar. Now that we've got that slid in here, we'll need to make sure we have even bar overhang on both sides. So you can use a tape measure or your finger just to line up, just to make sure that it's even. I think that looks pretty good. Yeah. But before we tighten our stay down, we'll want to make sure we have equal crossbar spread on both sides. I've already had the rear in place, like I said before, and I've slid my stay all the way up to this panel here as far as it'll go which is making it twenty-eight inches which is what we're going with today. So then we'll take our included Allen key and tighten that down. Let's go ahead and put on our crossbar end caps then finally, let's install our cover. So we'll just slide that on, making sure that your key is in the unlocked position. Once it's in place, lock that up and then it's covering up our hardware. Now with our last cover on, our Inno roof rack system is installed and we're ready to start loading up some accessories. That's going to complete our look at Inno roof rack system for factory track rails.
Average Customer Rating: 4.7 out of 5 stars (301 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.Rack works great with my 2014 escape carrying a heavy 14 ft old Town and a 10ft kayak. Service is great, was missing 2 endcaps called them up and they sent them out next day.
This product exceeded my expectations!! Fit my 2014 Explorer with no issues. Extremely easy to install- took about 15 minutes, these crossbars are sturdy and fit perfectly in the INNO feet that secure to the roof rails- I will be hauling 2 paddle boards and have no doubts that they will travel well. I recommend this product !!
Rack detached from my roof on the highway at about 70mph, taking my cargo container with it. Luckily, no one was behind me as it would have very easily caused an accident. Customer service was terrible and didn’t accept a return. Damaged the contents of the cargo container.Do not buy this product or from this company as they will not help.
Jenny N - 03/04/2022Perfect fit for my '22 Kia Sportage. Works great, took a kayak trip out on the lake 10 minutes after installing. Initial setup was simple and easy. Once all the components are configured and you're familiar with setup, all future removals and re-installs will be a breeze, won't take more than 5-10 minutes to install or remove.
Just finished installing on my 2021 Toyota Tacoma. Do not waste your time with the cheap paper tape measure that’s my only negative complaint.. other than that the price was right and it looks great! I had to wait a couple months for back order parts but we’ll worth the wait! I have not driven with it yet so I’m assuming there will be wind noise but I’m used to that with having a Jeep renegade as my last vehicle with the cross bars. I’m excited to haul my kayaks!
These racks are great, I did a ton of research to find something that would work for me since I didn’t have roof rails on my Kia Sportage. There are a lot of small pieces so installation was a little intimidating but it went smoothly. I’m not planning on using them for a ton of weight and more for looks. I’m not sure how they’d hold up as functional racks.
Easy to install. I’m happy with the product. Shipping took agile but worth it! I added kayak racks and now I’m able to enjoy my life a little more.
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
The kit etrailer put together contained all the parts I needed. It took a little figuring to determine how to put it together, but in total only about 30 minutes from box opening to mounting. Now that it is all sized and spaced, it should be much quicker to remount in the future.
I installed it on a 2016 Ford Focus hatchback. I am planning to carry a Thule Cascade 1700 XT rooftop carrier.
So far it looks good. The price was excellent. While driving, it has a bit of an humming noise, but it is not loud or annoying. I like that it has a full set of keys.
All told, it seems like a good product at a reasonable price point.
David M - 05/11/2020First and foremost… YES! I would recommend this product to anyone, so def. read further. Price wise… well below what the more known name brands wanted for a similar setup. Product is well made , but if I had to point out one defect… the rubber shoe the rests between the factory roof bar and the inno feet detaches easily during install (see photo). I will figure out how to securely attatch it when I remove it, because (IMO) it's not one of those units that remains on perminantly.
H. B - 08/21/2018I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
These cross bars are great. Bought them for load capacity at this budget friendly price. They exceed my expectations and do what they are designed to do. Sturdy and great look! Not an aerodynamic design, leading to plenty of wind noise, but that wasn’t a dealbreaker for me.
Missing 2 screws and 2 nuts. The instructions flyer needs to be re-written graphics awful. Looked at a few different Your Tube installs videos no good luck. Inno you must improve the lens quality and lighting when filming. Up close images when installing could help. I did purchase the square crossbars, YES there is some noise. Why did I purchase that style bar is due to the over-inflated price $$ for the aero style bar. I will remove the rack after summer, it's functional and accommodates a luggage rack nicely. The company did a SUPER Job in shipping that item to me in a timely manner. Customer Service gal easy to talk with and dedicated to providing superior customer service.
Great product so far! Just installed the roof rack on my 2015 Ford Fusion and everything was straight forward. I’m excited to use it while kayaking and traveling!
I did the research for a while looking at many different brands for a good quality crossbar at the right price. I came across this one a Japanese brand. As I read more about the brand it has been popular in Japan. I know Japanese product are top quality.
The crossbar, the footing and keys are made with high quality material. Instruction was very clear. Installation took about 10-15 minutes. I love that no tool required to do the install. No wind noise that I can hear at low speed. Have not tested at high speed yet. Overall, highly recommended to anyone looking for a crossbar from a great less polular brand but half the price of other more popular brand.
Very nice rack….tight fit on a small two door car. Big light weight expedition canoe fits on securely. High efficiency travel is the goal. The rack helps immensely.
I have a 2014 Chevy Malibu and these were easy to set up and work great! Better than I expected, highly recommended!
Good stuff. The bars work well with the other parts recommend here.
Overall, everything fit on my car perfectly, all the parts were there, and the directions were good enough that I didn't need a video to supplement. The sole reason I give these products 4 stars has nothing to do with etrailer themselves, they were great. Instead, its the bars. I should have thought of it before I bought them but they howl going down the road. It's not ideal but I am still pleased with how everything else turned out and fits.
I'm quite happy with this rack! Its so easy to take off and put on it I need to remove it in winter so it helps keep from rust forming under the brackets, that attach to the roof! Haul our canoe on the rack mount a two bike, rack to the rack! Haul lumber on it! It's very useful! Have it on a 2005 Scion xb!
Thank you so much for providing the below information! My experience with etrailer.com has been great so far and I appreciate the follow up.
The crossbars fit perfectly and I will definitely be writing a review. However, I realized when I opened the bike racks that I purchased the wrong rack for my car/bars.
Would you be able to provide me with information on how to return the bike racks
Heather A - 01/26/2019The bars fit well, the installation videos are life savers! Super responsive and honest customer service!
I own a 2005 Nissan Pathfinder with crazy high roof rails, and this Inno system works perfectly - Now I can securely mount my Thule Hullavator kayak rack which is made to attach to square bars. I had been using a Yakima round bar setup for a few years because I had tried the Thule Crossroads Foot Pack, but just couldn't make it fit.
IMO Inno quality is equal to or better than Thule anyway. Plus Inno is cheaper.
Also customer support at etrailer.com is very good and trustworthy.
They were sturdy and well made
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.