To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These durable feet help mount 2 Inno square crossbars to your vehicle's factory track system or fixed mounting points. The feet mount to your roof with base units and tighten with locking levers to secure system to roof.
Features:
Specs:
Average Customer Rating: 4.9 out of 5 stars (156 Customer Reviews)
These durable feet help mount 2 Inno square crossbars to your vehicle's factory track system or fixed mounting points. The feet mount to your roof with base units and tighten with locking levers to secure system to roof.If you're a Lexus GX460 owner, think the OEM cross bars are wimpy, and don't want to shell out $500-$600 for "aero" style bars, this is for you.
I chose the Inno INXP base over the INTR base because I thought it looked sleeker, and I wanted as much clearance over the shark fin antenna as I could (although both bases clear the antenna, the INXP is taller). The product description is slightly different for the two bases, but both of them are able to slide along the factory flush rails. Choosing between the two is a matter of taste.
A couple of hints for installation:
-I didn't receive an English copy of the installation instructions for the base, but was able to figure it out anyway. You could easily find them online.
-The screws that come with the base aren't needed, use the longer ones that come with the fit kit.
-Loosely attach the fit hooks, clip the base on top, slide the rail through, THEN tighten the screws.
-When putting the fit hooks on the rails before putting the base on top, make sure the screws are backed out as much as physically possible without disconnecting. Even still there is very little play when sliding the rails through before tightening everything down. It would be nice if the screws were even 1/8" longer, but it would only make installation easier. Once everything is tightened down it's as solid as can be.
Overall I'm very happy. I like the more rugged look of the square bars, and shaking them moves the whole vehicle and they don't budge.
I bought this rack because I had a pair of Thule rectangular bars. It is a solid and secure rack now. However, it is not quick on and off. Very fiddly, pretty much a two person job.
Also it make a ton of airflow noise. Pretty annoying.
John W
My order showed up quicker than expected and installed without too much hassle by myself. My only issue is that I expected the adapter parts to level out the mounting feet so that the two cross bars are in line. But nothing like that occurred so the bars sit at an able to each other. Maybe I'm missing something, but it seems to still work, just not what I expected.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Very sturdy and well made. The initial fitting took me a few times reading the directions to grasp, but it was also early in the morning so that could have been a user issue. Once all was tightened down though they are rock steady and along with the pads and bars hauled my kayak with ease.
These bases seem to be made of rugged and reliable materials however I cannot figure out how to get them onto the track Is of my Leer truck cap. This product claims to fit tracks, but I can't see how without some sort of a pedestal that attaches to the track.
Jenny N.
6/27/2022
I would like to look into this for you and I have a few questions that I would like to ask. What is the year, make, and model of your vehicle? Do you already have the square Inno bars?
The Inno product allowed us to use our older style square Thule bars with two Hullavators on our new vehicle which saved us many headaches and money.
Fit perfectly. A bit expensive but what isn’t anymore.
I ordered roof racks for our new to us car. Once I placed the order I decided I wanted longer cross bars. I cancelled the bars on the order but couldn't figure out to add the bars I wanted. I called etrailer and was connected to Ashley. Ashley helped me to get the bars I wanted. She kept in touch, letting me know about shipment, a slight delay in the shipment and when the shipment was expected to arrive. Ashly gave my purchase a personal touch that I really appreciated.
Pretty cool setup, instructions just need to to be better and all parts should be in one box
The quality and strength of the steel was never in question, and everything bolted up as normal.
It arrived with all its parts and all in good shape. Instructions for assembly were clear and it fit the car as needed. Since, it has done everything expected of it.
Peter
4/5/2019
Thanks for bothering. Still very satisfied.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Do you have a question about this Roof Rack?
Condition: Installed
Notes: Item has been previously test fit and has minor cosmetic scratches on the plastic and is missing the 4 square end cap pieces.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Augie B.
1/19/2018
Have been using Inno rack on our Mazda 5 for a year now and it works great!