Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
(103 reviews)
Price: $8.37
In Stock
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
Item # K12WB2
Our Price: $8.37
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (103)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Kodiak Accessories and Parts - K12WB2
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- Drive-In Stud
- Kodiak
- 1/2 Inch Diameter
- 2 Inch Long
Wheel stud is designed for Kodiak integral hub-and-rotor brake assemblies. Bolt is 2" long and has a thread size of 1/2"-20 UNF-2A.
Features:
- Application: 1-piece, hub-and-rotor brake assembly
- Spline diameter: 0.54"
- Spline length: 0.42"
- Threaded length: 1.46"
- Thread diameter: 1/2"-20 UNF-2A
- Base length: 0.54"
- Stud length: 2"
ROTOR/HUB-LB2.0 Kodiak 2" Long Wheel Stud - 1/2" - 20 UNF-2A
Video of Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Kodiak Tires and Wheels K12WB2 Review
Today we're going to look at the Kodiak replacement drive-in trailer hub wheel stud. It's a half-inch in diameter and two inches in length, and it's a quantity of one. Now, this half-inch stud is designed to replace a damage wheel stud on your trailer hub. The raised spline portion right down here of the stud is what will be driven or pressed in to your trailer hub. This stud is what will go through the bolt hole on your trailer wheel. When used with a wheel lug nut, will hold your tire and wheel to your axle. These are stamped as a grade-eight bolt.
The thread end size, again, is half-inches by 20 threads per inch, and uses a standard half-inch by 20 lug nut. I happened to pull one of those lug nuts like this one right here, and you can see they just screw right on to the end once you put your wheel and tire assembly on, you just put your lug nuts on and torque them to the correct specs. Just to give you the measurements the overall length which you measure from the bottom of the head to the very end of the bolt, you can see is right at two inches. The threaded portion is right at about one-and-a-half inches long. Then, the spline diameter is going to be .54 inches. That should do it for the review on the Kodiak replacement drive-in trailer hub wheel stud, half-inch diameter by two inches in length for a quantity of one..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long - K12WB2
Average Customer Rating: 4.9 out of 5 stars (103 Customer Reviews)
Wheel stud is designed for Kodiak integral hub-and-rotor brake assemblies. Bolt is 2" long and has a thread size of 1/2"-20 UNF-2A.by: Richard 12/06/2021
as descried and on time shipping
Comments
very good no issues at all
Richard W - 12/06/2022by: Johnny 08/25/2022
Still holding wheel on the boat trailer
by: Thomas 09/10/2022
Parts I needed to get my trailer back on the road.
by: Gary 10/25/2022
Very good phone service, and no problems after a year.
by: RussF03/30/2015
Recieved all of my items( wheel assemblys, chrome lug nuts and studs) and upon first inspection it looks like everything is top notch in regard to fit and finsh. I will update when I get the time to complete the work on my trailer. Price was excellent for the quality of the items.
by: Gary C.10/30/2013
I am refurbishing my 20 year old boat trailer. I had to destroy several of the wheel lug bolts in order to remove the wheels from the hubs. I had a hard time finding replacement bolts. ETRAILER.COM HAD WHAT I NEEDED! I received the bolts in very timely manner! They installed and worked perfectly!
Thanks ETRAILER.COM. I now know where to go for trailer parts
by: SteveO01/16/2016
Another product that I purchased for my 10K lb trailer build. These studs will be used to mount my spare tire to the trailer. Quality looks to be pretty good.
by: Michael 07/11/2021
Used these to lengthen the studs on my kendon trailer. Worked great, fast shipping
by: Donald11/15/2017
The wheel tire and wheel bolt and nuts have preformed very well, no problems
by: Ken03/04/2017
Ordered lug bolts and nuts to repair a 20 year old drum. Good prices, fast delivery, my trailer is back on the road. Replacing the bolts as opposed to the drum saved $50 or so dollars
by: Brent08/13/2014
What can I say, The site was easy to navigate and the wheel studs I found were a direct match to the ones on my particular trailer. They were shipped very quickly and took only a couple of days to be delivered. I've bookmarked this site for future trailer needs!
by: Thomas05/05/2016
Everything I have ordered has been great and delivered on time. The pricing is very competitive and I would definitely order from etrailer again. I was extremely impressed with the LED lighting. Thanks, TOM
by: Thomas05/05/2016
Everything I have ordered has been great and delivered on time. The pricing is very competitive and I would definitely order from etrailer again. I was extremely impressed with the LED lighting. Thanks, TOM
by: Don10/11/2016
I had a hard time locating this part and searched several websites and manufacturers before finding it one etrailer.com. I have purchased other items from this supplier and have had good luck with all of it.
by: Nick03/29/2018
These wheel studs fit my oddball trailer hub perfectly. The guys at etrailer were a huge help in finding the correct parts as well.
by: Paul 12/13/2016
Every item I ordered worked and fit exactly as I had hoped it would. Prices and shipping was top notch and will definitely buy from e-trailer again.
by: Duffy11/28/2018
Item was exactly what I needed and ordered, prompt service, fast shipping and an exceptional nice and great employee that helped me with my order and details. I would Highly recommend etrailer.
by: Mike F07/24/2015
Perfect replacement lugs (springs and hardware) for my trailer wheel rotors.
by: ScoobyDude08/22/2021
Perfect fit - dimensions were exactly as stated on the webpage.
by: Natalie 11/07/2020
etrailer sells extremely reliable products. The price is good. You as a customer will be treated well by their staff. Yeah, I highly recommend etrailer!!!!!
by: Jim D08/26/2020
The lug I was looking for fit our trailer wheels. Exact replacement.
by: Mark S07/13/2017
Lugs and nuts fit perfectly.
Could not get them locally but etrailer web site gave measurement instruction to insure ordering the right parts.
by: Jerald B.06/03/2014
Great product! I ordered what I thought was the right size, but the spline is a hair too small... I got exactly what I ordered, I just didn't measure right.. I need to get real calipers LOL.. No plan to return them because I'm sure I'll need them one day. Fast shipping and I'm satisfied!
by: Andrew H.09/25/2013
The studs arrived today and are on my trailer already. God product and excellent service! Thanks etrailer.com
by: Tim W. 08/14/2015
I needed wheel studs, these are wheel studs. Made from steel, I can only assume they're gonna hold up.
They fit my hub perfect.
25
102
Show More Reviews
See what our Experts say about this Kodiak Accessories and Parts
- Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer HubIn order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll also need to know the length of the threaded area of the stud, the length of the splined area and the diameter of the portion that's driven into the hub. In the case of the Kodiak # K12WB2 wheel stud you mentioned, the diameter of the splined area (portion driven into...
view full answer...
- 2 Inch Long Trailer Hub Stud Recommendation with 5/8 inch Diameter SplineThe spline diameter of the part # 7-122 that you referenced is right at 5/8 of an inch so it would match what you have.
view full answer... - Replacement Wheel Bolt Stud That Matches The Lippert 121803 Wheel StudI took a look at the wheel lug stud LCI SKU 121803 you mentioned, and I was able to find the Kodiak Wheel Bolt # K12WB2. This bolt is 2" long, and has a thread size of 1/2"-20 UNF-2A.
view full answer...
- Availability of Replacement Wheel Studs for AL-KO 8490 DrumThe studs on your AL-KO drum should have a 1/2" diameter like the Kodiak # K12WB2 but you will need to filter through the attached link of wheel bolts to find the one that matches your stud length. These are filtered by total length but you can click on each individual page to see the length of the threaded portion to match your application.
view full answer... - Replacement Studs for Trailer Hub that are 2 inch Long and .54 inch Spline DiameterBased on the dimensions of your old studs the part # K12WB2 that you referenced is exactly what you'd need. The .02 inch diameter difference you mentioned for the splines ensures that the stud fits tightly. I attached a review video for this stud for you to check out as well.
view full answer... - Wheel Lug Replacement Recommendation For 2013 Keystone CougarThe closest matching wheel stud that will work well for your Keystone is the part # K12WB2 which has a diameter of .54 inch for the splines, is 2 inches overall long, and has a thread length of 1.46 inch.
view full answer... - Replacement Wheel Stud for Folding TrailerBased on the dimensions of the wheel stud you sent in a picture of the part # K12WB2 would be what you'd need.
view full answer...
- Can Trailer Hub with Screw-In Studs Be Converted to Accept Drive-In StudsI do not recommend trying to convert your existing trailer hubs so that they will except drive-in studs like the Kodiak # K12WB2 that you referenced. This is going to require some modification to the hub (such as drilling like you mentioned) that will void its warranty and could also affect its integrity. Your best option at this point is to simply replace the hub altogether. If you can tell me the inner and outer bearing that your existing hub uses along with its bolt pattern and capacity,...
view full answer... - Replacement Wheel Stud for 2006 Boat Trailer with Disc BrakesWe do not have the obscure replacement stud you are seeking. The Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2 will meet your measurements with the exception of spline and base length, so it will fit but won't be quite as strong as your previous wheel stud. This is the closest fit we carry.
view full answer...
- 2 inch Long Wheel Stud Recommendation for Boat Trailer that is 1/2 inch in DiameterI believe what you are looking for is our part # K12WB2. This has a thread diameter of 1/2 inch, a spline diameter of .54 inch (I know you said .56), and is overall 2 inches. This is our closest option and is a very standard stud seen for trailer hubs so I'd be surprised if this wasn't exactly what you need.
view full answer... - Replacement Wheel Studs For 2013 Puma Canyon Cat Travel TrailerWe have replacement studs and hubs. You'll need to take some measurements of the lug stud like the dimensions on the attached picture of the Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2. This will help us to get you the right one. If you need the replacement hub, we will need measurements or bearing numbers. I've attached an article to help.
view full answer...
- Replacement Wheel Stud Recommendation for Kodiak Disc Brake Kit K2HR712Yes, if you are looking for replacement wheel studs for your Kodiak Disc Brake Kit you would want the part # K12WB2.
view full answer... - Replacement Wheel Stud For A 1/2 X 2 Lug Stud For 7,000 Lb AxleThe closest wheel stud we offer to the size you need is the Kodiak Wheel Bolt - 1/2" Diameter x 2" Long, part # K12WB2. This wheel stud has a knurl of .540, which is slightly larger than the .525 you specified in the question. I have included a product description link and a video demo link below.
view full answer... - What Torque Should I Use For A 16 Inch Aluminum Trailer TireFor a 16 inch steel wheel with 1/2 inch wheel studs. I'd recommend 90-100 ft-lb for a 16 inch aluminum wheel. Be sure to recheck the torque often.
view full answer... - Available Replacement Boat Trailer Wheel Studs for Ebbtide 3900I could not find wheel stud specs based on your information but we do have both drive-in and screw-in type wheels studs in various diameters, shown on the linked page. The most common diameters are 1/2-inch and 9/16-inch. On the page just click on your stud diameter and length to then see just the items with those attributes. For instance, for a 1/2-inch x 2-inch drive in stud we offer Kodiak part # K12WB2. You may be able to obtain wheel stud specs from the trailer manufacturer by providing...
view full answer... - Wheel Stud Replacement Recommendation for Titan Disc Brake Kit # T4843800Titan Disc Brake Kit # T4843800 takes a 1/2" drive-in wheel stud. Titan does not list a specific replacement but we have some options from Kodiak. The shorter one (list as 1.7 inches long) is # K12WB169 and the slightly longer one (2 inches) is # K12WB2.
view full answer... - Replacement Wheel Stud Recommendation to Replace a 2 inch Long Stud that is 1/2 inch DiameterIt sounds like you are looking for the part # K12WB2 as it fits the description you listed. You can check out the measurement picture I attached and compare it to what you have to be sure.
view full answer...
- Replacement Wheel Studs for 13 inch Kodiak Hub/RotorsFor 1/2 inch wheel studs for Kodiak hub/rotors we have the Kodiak wheel stud part # K12WB2 which is what you'd need.
view full answer... - How To Replace Wheel StudsI am happy to help you replace the wheels studs but it will require some measuring with digital calipers like part # PTW80157. I have attached a diagram with the measurements needed to get the correct replacement. Once you can provide me with the A, B, C, D, E, and F measurements I would be able to make sure you get the correct replacement. For example the Kodiak Wheel Bolt part # K12WB2 measure 1/2" in diameter and 2" long. You would need to remove the hub and drive the studs out.
view full answer...
- Replacement Wheel Studs or Bolts for UFP Hub with H-1377 Stamp on HubWe don't have exact specs on the part that you're referring to, but I do know that's a stamp on a UFP hub, so I was able to reach out to my tech contact at Dexter UFP and he said that most of the hubs that number would be stamped on use a 1/2" x 20 lug stud like the Replacement Wheel Stud 1/2" x 2" # 25-53 (screw in), which is 2" long or the Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2 (drive in). You will need to determine whether you have a drive in stud or screw in bolt based...
view full answer... - Recommended Replacement Wheel Studs for Hub with 5 StudsFor your wheel studs, I believe you will want the Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2. Another close option but with a wider spline is the Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1 # 7-122. These are the closest options to your measurements for your hub. I've attached photos of these measurements for you to compare.
view full answer...
- Replacement Wheel Studs with Longer Threaded DimensionTo get the wheel stud replacements you need, you will need to take some measurements using a digital caliper like # PTW80157. You will need to give me the thread diameter, spline length, base length, spline diameter. From there we can get the thread length and stud length that will make the wheel studs compatible with your application. I've attached a photo to assist.
view full answer...
- Replacement Wheel Bolt or Replacement Hub for Haul Master 90145 Utility TrailerFor your utility trailer, I recommend pulling one of the studs and measuring for fit. I've linked the picture measuring the Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2 for reference. You will need to use a digital caliper like # PTW80157 to get the precise measurements. Your other option is to pull your hub and get the bearing numbers and seal number from your hub for a replacement hub. If you can't find the numbers printed on the face of your bearing you can use that digital...
view full answer...
- Shorelander Wheel Hub Stud RecommendationLooks like you have a spline diameter of .56 inches and and threaded portion of 1/2 inch which is very popular. For that you'd want the part # K12WB2. I attached a picture that has a dimensional diagram for you to check out as well.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Rachael H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.