bing tracking image
  1. Trailer Leaf Spring Suspension
  2. Dexter Axle
  3. Alignment and Lift Kits
  4. Axle Mounting Hardware
  5. Spring Mounting Hardware
  6. Double Eye Springs
  7. Round Axle - 2-3/8 Inch
Dexter Trailer Springs Over-Under Conversion Kit

Dexter Trailer Springs Over-Under Conversion Kit

Item # K71-384-00
lowest price pledge
Our Price: $61.29
Trailer Leaf Spring Suspension
Orders above $99 qualify for Free Shipping
Shipping Weight: 7 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only. Lowest Prices for the best trailer leaf spring suspension from Dexter Axle. Dexter Trailer Springs Over-Under Conversion Kit part number K71-384-00 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (327)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Used (1)
  • Why etrailer?

Dexter Axle Trailer Leaf Spring Suspension - K71-384-00

  • Alignment and Lift Kits
  • Axle Mounting Hardware
  • Spring Mounting Hardware
  • Double Eye Springs
  • Round Axle - 2-3/8 Inch
  • Single Axle
  • Dexter Axle

Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only.


  • Fits 2-3/8" axle
  • Allows moving trailer leaf springs to top of axle
    • For use with double-eye springs only
  • Sleeve bolts allow the setup to install level
  • Includes:
    • (2) Spring Seat
    • (8) Nut
    • (4) U-Bolt
    • (2) Tie Plate
    • 4 Nut couplings
  • U-bolt length: 5-1/8"

K71-384-00 Dexter Axle Over/Under Conversion Kit

Installation Details K71-384-00 Installation instructions

Video of Dexter Trailer Springs Over-Under Conversion Kit

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Dexter Trailer Springs Over-Under Conversion Kit Installation

Hey, guys, Kevin here at trailer and today I'm gonna be showing you how to install the Dexter Over-Under Axle Conversion Kit here on our enclosed trailer build. So we get this question all the time: How can I boost the height of my trailer so that I can get it level with my tow vehicle, especially with newer trucks Seems like Ram keeps making their trucks taller and taller so that they can't, you know, no one can't get their fifth wheel in there without actually hitting the bed rails. So let me show you this conversion kit that we have, on our enclosed trail. So with our tire off now, I can show you what our assembly looks like here. As you can see, the U-bolts are facing up. When we put this conversion kit on, it's going to have our U-bolts facing down.

And then we're gonna be dropping our axle down here, increasing our ride height. But the first thing we need to do is measure our axle. So we're gonna try and find the diameter of the axle so that we can get the correct kit. So looking at it. It looks like we're at two and three eighths inch.

Now, this kit does come with two and three eighths inch and a three-inch diameter kit. That really is gonna go with the size of the U-bolts and then the spring seats. All right, I want to give you some measurements here. Let's see where factory ride height is. So from the ground to the wheel well, we're sitting at 29 and 1/4.

And the ground to the body, we're sitting right at 12 and 3/4. Okay, so now we got our kit installed and the axle flipped under our leaf spring. Let me give you a ride height. So now from the ground to the wheel well, we're sitting at right about 34 and 1/4 inches. And then let me also give you one for, ground to the body.

Sitting right at 17 inches. So it's gonna give us some extra space, handle all those clearance issues that we've been having. So the installation difficulty of this kit is going to vary trailer to trailer. Obviously, with our small enclosed trailer here, it really wasn't that difficult. But if you have a giant fifth wheel, maybe you have a 40-foot fifth wheel with all kinds of weight. Whole lot of axle trying to jack it up, it's gonna give you a little bit more of a challenge. So you're gonna wanna take that in mind while you're doing this. Other than that, just bolting on the parts, really isn't that difficult. It's really just a lot of set up for a couple of changes. So your Dexter Over-Under Conversion Kit is going to come with, two spring seats, your nut adjusters, your nuts, your U-bolts, and your U-bolt plates. So first step of this installation is gonna be removing your tires. So you wanna do that while the trailer is still on the ground. So now I got the nuts off, and take up my wheel. I'll set it to the side. I did jack up this trailer, now that I have the nuts off, and then I added four jack stands. You're gonna make sure the new place, and even amount of jack stands along your trailer just so that you can support it without having a worry about it coming down on top here. Obviously, if you have a bigger trailer, go ahead and use more. Do whatever you feel comfortable with. As you can see, our U-bolts in our U-bolt plate is pretty rusted up here. So I'm gonna spray some penetrating oil on here just so that we can get our bolts off. I'll let that set in just a little bit, and then we're gonna take these nuts off. All right, we got our first U-bolt out. I try to go back and forth on each of these just so that the U-bolt doesn't try to tension one way or the other. All right, now that we got our second U-bolt off and our U-bolt plate down. We can go to the other side, do the same thing. So the next step we're gonna do is we're going to, support our axle here cause right now it is free-hanging since we don't have the bolts holding it to our springs. So what I'm gonna do, is I'm gonna stick a jack right in the center, to just support that weight. So, as you can see, if I lift it up this is just free. You don't want that falling down on you while you're working. There we go. And then we're gonna take this bolt off right here. So we're gonna be dropping off the bolt from the front of our leaf spring. So that's gonna be going towards the nose of your trailer. All right, now that we got that out, we're going to pull out our bolt. This can be a little stiff here just because it's got some weight pressing down on it. Our bolt's actually on here pretty good. We are going to actually just thread our nut back on just a little bit. So that we can hammer on our nut, not damage our bolt here. And then we're gonna pop it out that way. Alright, so next, I'm gonna take a punch, and we're just gonna hammer this, bolt out a little bit. So we're gonna get to a point where the punching hammer isn't really gonna be effective here. And we're just gonna get under and socket it ,the rest off the way out. All right, so now that we got our bolt out. I'm just gonna pop the, spring down out of the hanger. May have to loosen this bolt just a little bit. So that it will hang freely. Just like that. So now we can remove our axle, and move, hang our springs back up and redo our whole setup with the conversion kit. So now we have our axle loose and our leaf springs loose. We're going to pull our axle out. We can get our leaf springs back in place, and then work on bolting our axle. So now we have the axle off, we can put this back in place. I do wanna mention that I did loosen up these bolts just to kinda move this in a little bit. Just so that we can get lined up right. Now we can sled our bolt through. And you are gonna have to kinda hammer it back into place cause it is sticking up just a bit. And then we can thread on our nut. So the next thing we're gonna do, is sled our axle back over into place. And we're gonna take our spring seat, and our adjustment nuts here. I'm gonna slide these on. They don't need to go all the way down. We're just getting them on about halfway just so that we can see exactly where we need to be. So the spring seat is actually gonna sit right here. And then we're going to tighten it down, put up a little bit more. So we'd set this on here. We'll get this level. And then tighten these down using a wrench so they put pressure on here, the bracket on our axle. Alright, so we're gonna just tighten these just so that the spring seat is level. We don't want this actually pushing up off. We want the spring seat actually making contact with the axle. And one other thing I do, want to note is that Dexter highly recommends coming in afterwards and tacking this on both sides so that you don't have any chance of the axle moving it all and getting off level. I already went ahead and put the other side up just so that it was a little bit easier on video to show you me putting this side on. But what you can do also, just stick your chunk of wood, some kind of black, anything that you got. Just to kinda get it up level. And now we're going to, set this on here. So there's gonna be a little, my nipple thing right here and the other side that you're gonna poke onto. It's gonna line that up, there you go. And then you can ,use something to hold it up in place. We're gonna set our plate on here, Just like this. If you set it this way, your bolts aren't gonna line up and you're gonna be hitting, your brake from, or your flange for your axle here. So now we will take our U-bolts. We're going to put them through the axle like that. And then up through our plate. All right, before our U- bolts, we're going like this. Now we're gonna be flipping them upside down this way. So we're gonna get under the axle. And then open into our plate. And then we will put our nuts on. It's gonna get inside through both sides going, then we can tighten it down. Alright, now we can go ahead and tighten these down. So right now I'm just doing this with our regular circle wrench. Just to get it, kind of hand tight. But then we are going to do this, to check what you can find in your instructions. And you do wanna do these evenly. So that you're not pulling on one side too much and throwing it off. So here's our completed conversion kit. Basically, if you look at, our side by side of our axle to start with. From now, we basically completely flipped our system here. The bend of the U-bolt used to be up here and now it's down here. So you're going to gain the diameter of your axle as well as your leaf Springs. So that you can get your trailer sitting a little bit higher so that you can handle all those clearance issues that you might be facing. All right, now that we got our system in place. We can put our wheel back on. So as you can see, now that we have the trailer lowered back down. It's sitting on the wheels. We have clearly a bigger difference here. So we have a way higher ride height, But really that's it for this installation. My name's Kevin. Thanks for watching guys..

Customer Reviews

Dexter Trailer Springs Over-Under Conversion Kit - K71-384-00

Average Customer Rating:  4.8 out of 5 stars   (327 Customer Reviews)

Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only.


The kit got here before the date listed that was good. All the parts were there. The instructions could use some pics or diagrams of how the parts should be arranged. The bad the plate sent with the kit was way to narrow for the springs so had to use the plate for the old setup which is fine I guess it was heavier duty anyway. But if I am buying new parts I would like to use the parts I paid for. Over all it did the job. The holes in the new plate was at least 1/4" off for the u bolts to go through. Again no way would it work. Have not towed the camper yet but looks solid. One thing more I read that you could weld the one part onto your axle. Would not recommend that if your wires are like mine they run through the axle to the other side which is kind cool but if you heat that metal up you could melt the wires and cause problems with your brakes. I would be careful. I did not weld it looks stable as is and I plan to take this camper off road.

You mentioned that the plate bolt holes did not match up to the u bolts and I wanted to see if you would be able to send a picture?
-- Etrailer Expert Jenny N - 04/25/2022
Hello Jenny, I will attach a pic of the parts I could not use. As you will see the space between the holes are call it 1.75 inches it is even different a little between top and bottom holes but just a 0.0625 or so. I did not get the calipers out and both plates are the same and my spring is 2 inches wide defiantly not going to fit. I really did not want to take the tire off and take pics of the trailer axle as the bottom view did not show much. Hope this helps and if you really need it I will take the tire off so I could show you the old plate.
-- comment by: Jim - 04/25/2022
I believe I have figured out what happened. This conversion kit is meant to be used with double eye springs which are 1.75 inches wide and if you have 2-inch-wide springs then you have slipper springs. This would account for why the plates did not line up the way they normally would.
-- Etrailer Expert Jenny N - 04/25/2022


Very happy with the parts and instructions on the installation.

I was able to use (4) jack stands to support my 2019 Clipper 106 Sport. Once I was able to drop the leaf springs, the axle slid right out. I DID tack weld the new parts as recommended. Very straight forward install and shouldn't bottom-out in the future.


This kit worked great. I gained about 5 inches clearance. The camper seems to tow alot better with the trailer frame inline with the truck frame. I would recommend this kit if your in need of more clearance.


Great conversion kit, easy to get the plates lined up perfectly. I welded the new saddles onto the axle and welded the nuts to the bolts so there is zero chance of anything moving. Having the plates held in perfect position while welding made it simple. Solved the "dragging wheels problem" without having to cut off and reweld the fenders (which had been welded without enough clearance to the tires at the factory.)

1 year later and the axle flip is working great, zero problems. Glad I did it!
Soggy - 06/22/2021


Worked perfectly. As advertised. Had fab shop drop a couple tac welds after installation. No issues.


My order arrived on the date they said it would. It was an easy installation, even for this 76 year-old. The hardest part was getting up and down with my bad knees. After the installation I had to start placing 3 Yellow leveling block under each stabilizer jack. And I will need to purchase a new Hitch because my camper is now sitting nose low. That was all expected! etrailer is the best! I've ordered many items for my camper from etrailer over the years and have never had a problem.

Couldnt be better! I just returned from a week long Boondocking camping trip. The extra height allowed me to travel the back roads worry free.
Don - 05/22/2022


This was great! My camper was really low in the back when pulling it behind my 4WD Silverado. Took a few hours but was pretty easy to install this. It would have been nice to have pictures with the instructions, but it wasn't too tough to figure out.


Flipping the axles on my 29' travel trailer was the best investment so far and And e-Trailer could not have been more help in safely and correctly completing the project. Not to mention the top quality parts that came in the kit. It's been a year and a couple thousand miles and the kit is holding strong. Thanks for a great all-around purchase. I have done more business with e-Trailer since and the products and service are excellent!


High quality product. Straight toward install and has held up very well. Installed in a driveway in a few hours. I installed this kit on my 1974 komfort camper last year and have put highway and dirt road miles on it since. I take it elk hunting and get into some tight rough situations and haven't had any issues. It gave the camper just the right amount of clearance and it pulls level behind my Tundra with a curt anti sway stabilizer hitch. Before this kit my campers ground clearance was awful and I was always worried about puncturing my holding tank. This product fixed that problem.


I put these on a 3500lb Dexter axle. I welded the bracket to the axle and worked good. Not to difficult for an average welder.


Needed to lift my 2015 Pacific Coachworks trailer as it dragged the hitch and bumper . Easy install DIY for me as I am Handy. Took the entire day, taking my time for measurements. Had to jack up the trailer quite high, 2 feet lots of cribbing. I had a wire feed welder and tacked the brackets to the axle. Gained over 4+ inches. Never drags anywhere now even offroad. Tows no different, with my Fastway e-2 10k hitch. Before and after pics.


We modified a client's newly acquired Flagstaff pop-up to better handle off-road camping. This kit made the process simple, reliable and inexpensive. We opted to remove the original spring perches and weld on new (and shock mounts) but the kit allowed for simple bolt on.
The customer had us winterize the camper, as part of the service we checked tires, bearings and axles....the U-bolts and mounts all looked fantastic.


This kit does exactly what it advertises. Gave me 4 1/2 in of lift. It is very straightforward to install. The only difficult part was getting the trailer up on jack stands. Make sure you do it on level ground, it makes jacking it much easier. I also had an issue with not having enough spacer nuts. I actually bought two kits and both only had 2 nuts and 4 are needed. There is no packing list so use the picture in the etrailer ad. etrailer was great about making it right.


Very easy and quick to instalk


I received the curt hitch from and I would recommend them to anyone who is looking for trailer equipment the service is great very prompt and exactly what I had expected great job you knocked it out of the park


Needed to lift my travel trailer because it was dragging in my driveway.
This did e trick!!!

Still doing v what its supposed to
Chad - 06/03/2022


Great product. Detailed instructions. Qualify materials.
My 5th wheel camper tows like a dream


Over the years, my 15ft Sunline had been dragging at times, wheels wearing into the sides and tops of the wheel wells. With the help of etrailer my mechanic and I found
the axle kit, bolts, and supplies to put the springs over the axle and make everything
really solid. What a blessing, finally I was able to seal the wheel wells and indeed all
the perimeter frame tightly. ( We also used angle stock to strengthen the whole frame)
Finally I have a trailer that does not leak and is dust free inside after each trip. I used
over 40 tubes of GE silicone sealant in sealing up all the leaks; for they were wide
cracks; followed with Dyco 20/20 sealer several coats over the wheel wells.

One year later the trailer still tracks well behind the vehicle without wheel bounce or scraping that it had before.
Herbert E - 04/24/2021


Installed on a 2021 wildwood 27xlbh. Reasoning for install was sewer at rear was to close for my comfort at times. Use a stock 21 ram 2500 to pull and the truck does sit higher then most so the lift on camper fits well with truck combo. Installed lift myself, but recommend expert help as I am a mechanic.


The kit was easy to install. I was missing one nut but it was easily replaced at a local trailer store. My trailer now rides level with my truck and I don’t have to worry about scraping any more.


This kit is well thought out. Installation was a big job but straight forward. I really like how it lifted my rv. I have a lot of ground clearance now. It was worth the hard work.


Perfect fit! I put this kit on my K-Z sportsmen classic camper. Like I said it was a perfect easy fit. Jacking the camper up took the longest. The kit says you can just bolt it on but we welded to be extra safe. I also went from an 13inch tire to a 14inch tire. Also upgraded to a load D tire. With the tires and axle flip I gained 6 extra inches. It now fits my truck perfect and the better tires made it way more stable. Would highly recommend. I was also quoted $130 for a similar kit by my local RV service garage. Buy this to save the money. Even if you get this and need to pay someone to do the recommended welds it’s going to save you money. I’ll include some before and after pictures.


It took me 1.5 hours from start to finish, including clean-up, to install this kit. The instructions were simple and easy to follow, but remove the old u-bolts, plates and nuts - reassemble immediately for a reference of how the new bolts and plates go on (just upside down instead).

I got a 5" lift as a result of using this kit. Currently, I am only using the nuts and spacing bolts but plan on getting the spring seats welded at some point. delivered them quickly, with great communication throughout the process.


All parts are in box. I watched a few videos and it actually went really well. Instead of tacking I put a full weld on. Raised my camper a solid 6 to 8 inches. People complain about the u bolts being smaller but the u bolts no longer support the weight and the need for larger bolts no longer exist when putting the axle under the spring vs above. Very satisfied. Took 5 hours including lunch break and painting.


I gave a 5 star even though there were Dingle berries on the radius cut outs. They chipped off easy enough, but I used to weld for a living. Also I used my old spring plate along with yours so that the spring was sandwiched between them. That way the radius on the plate still worked with the spring. Everything fit great and was as simple as could be. Great product and I could not make them cheaper or better.

Show More Reviews

See what our Experts say about this Dexter Axle Trailer Leaf Spring Suspension

  • Can Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 Be Used with Slipper Springs
    Unfortunately the Dexter Trailer Springs Over-Under Conversion Kit, part # K71-384-00, is specified by Dexter for use only with double-eye springs. It is not suitable for use with slipper springs. One option you could consider is to replace the spring hangers on your trailer with longer ones. This will have the effect of lifting your trailer frame relative to the axle. Do please note that this will also raise the center of gravity of the trailer and alter its handling to some degree....
    view full answer...
  • Can Dexter Over Under Conversion Kit be Used on a Lippert Brand Axle
    The axle manufacturer should not be a factor for using the over under conversion kit # K71-384-00. You just need to have 2-3/8 inch diameter round axle and double-eye leaf spring suspension to use this kit.
    view full answer...
  • Installation Instructions for Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00
    Thank you again for ordering with, we appreciate your business. I have attached a scan of the installation instructions for the Dexter Trailer Springs Over-Under Conversion Kit, # K71-384-00.
    view full answer...
    Image 1 for
  • Will Raising the Height of a Trailer Change is Capacity
    First, every trailer is going to have a different coupler height so 12 inches is not out of the ordinary though it is pretty low. If you need the extra height then using an over/under conversion kit such as # K71-384-00 would add some height. It won't change the rating on the trailer but it will make the trailer more susceptible to sway because it will raise the center of gravity. To use this conversion kit you will need to have double eye leaf spring suspension and a 2-3/8 inch diameter...
    view full answer...
  • How to Measure Pop Up Camper Axle Diameter to Pick Out an Over-Under Axle Kit
    The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 that you referenced is designed for 2-3/8 inch diameter axles which is normally used on 3,500 lb axles. You most likely have a smaller axle diameter than this like either 1-1/2 inch or 1-3/4, but you can get under your trailer to measure to be sure. I attached a picture that shows where to measure. Feel free to email me back with the diameter of your axle if not 2-3/8 inches and we can piece together an over-under kit for...
    view full answer...
    Image 1 for
  • Can an Over Under Axle Conversion Be Used on a Trailer with Shocks
    On an over/under conversion kit such as # K71-384-00 the leaf spring stack will be moved above the axle. Depending on how that shock is attached it would either have to be removed, relocated, or replaced with a shorter shock in order to work properly with an over/under conversion kit. If you plan to relocate the shock you will need to find a qualified welder to do this. Same goes for the installation of the # K71-384-00.
    view full answer...
  • How Much Height is Gained Using a Dexter Over-Under Conversion Kit
    When using an over/under conversion kit such as # K71-384-00 to add ground clearance to a trailer the amount of height gained will the diameter of the axle plus the thickness of the leaf spring stack at the axle. So for example if your axle is 2-3/8 inches in diameter and the leaf spring stack is 1 inch thick then you should get approximately 3-3/8 inches of additional height. If you need more height than the combined height of he axle and leaf spring stack then the only other option...
    view full answer...
  • Will Using the Dexter Spring Conversion Kit Provide Additional Clearance for ATV Trailer Fenders
    Yes the Dexter Trailer Suspension Over - Under Conversion Kit # K71-384-00 that you referenced will provide additional clearance for loading your ATVs on your single axle trailer. This kit is a bolt on kit but Dexter strongly recommends tack welding the spring seat. This kit is intended to be used on 2-3/8 in diameter axles, please make sure this is compatible with the diameter of your existing axle. Using this kit will change the geometry of your trailer slightly. It will provide...
    view full answer...
  • How Many Conversion kits Are Needed For Tandem Axle Trailer
    The Dexter Trailer Springs Over-Under Conversion Kit, part # K71-384-00, you referenced is intended for one axle, so you are right that you would need to order a quantity of 2 for a tandem axle trailer.
    view full answer...
  • Can I Use a 2-inch Square Block Between Spring Seat and Spring for Additional Trailer Height
    While a 2-inch block would provide additional trailer height, I cannot recommend doing so because it will result in less suspension travel or deflection. Changing the height of a trailer can affect the center of gravity and cause the trailer to have more sway in wind or when large trucks pass. To change the height you will have to remove the existing hangers and replace them with longer hangers. This could involve grinding off the old hangers and welding new ones in place. The best and...
    view full answer...
  • Over-Under Axle Conversion Kit for 2-3/8-Inch Trailer Axle
    For your 1983 Shasta single-axle travel trailer you have identified the correct over-under axle conversion kit to fit its 2-3/8-inch diameter. This kit will provide approximately half of your desired height drop since its effect will be a function of axle diameter, which is 2-3/8-inches. Your trailer must have double-eye springs, not slipper springs, in order to use an over-under kit.
    view full answer...
  • How to Determine the Diameter of a Trailer Axle
    Measuring a round axle can be difficult. You would need a set of dial or digital calipers to get an accurate measurement. Using a tape measure would not be accurate enough. Calipers are available at discount tool shops. Nicer ones can get a little costly. But if you don't need precise measurements of things often an inexpensive analog model will work just fine. Sometimes you can go by the axle capacity but not always. Typical Axle Diameters Based on Axle Capacity 1,000-lb - 2,000-lb...
    view full answer...
  • Should the New Spring Seats be Welded in Place on the Dexter Over-Under Conversion Kit
    It is strongly recommended to at least tack weld the new spring seats in place. With the load and forces that trailer suspension is subjected to, simply bolting the spring seats in place would not be the most secure type of attachment.
    view full answer...
  • Will Installing Higher Rated Leaf Springs on a Trailer Give it More Capacity.
    If you add higher rated leaf springs on your 22 foot trailer the suspension will have a higher capacity, but trailer capacities are more than just based on the spring rating used. Your capacity will only be as high as the weakest component in the setup. Other things to consider are, axle ratings, hub capacity, and frame capacity. Your best option would be to use 3,500 lb axle rated leaf springs since that is the capacity of your axles. I attached an FAQ on trailer springs for you to check...
    view full answer...
  • Axle Over-Under Conversion Kit for 2-3/8 Inch Diameter Axle
    The # K71-384-00 is indeed compatible with a 2-3/8 inch axle. The new spring seats don't necessarily need to be completely welded in place, but I'd recommend tacking them, at least. The existing spring seats would be on the wrong side of the axle, and you wouldn't want to actually turn the axle over, because it would have your wheel camber going the wrong way.
    view full answer...
  • Solution for Axle Stuck to Leaf Spring During Over-Under Conversion
    Your question came in totally blank, all I got were a couple pictures of a drop spindle axle on top of a leaf spring with the U-bolts removed. If you are having difficulty separating the leaf spring from the axle you might try some penetrating lube like WD40 and a mallet to try and break the two apart from each other. Corrosion may have built up between the two parts and now they are stuck together. You might also try and get a pry bar between the spring seat and the spring to see if...
    view full answer...
    Image 1 for Image 2 for
  • If a Trailer Has the Leaf Springs Above the Axle Can it Be Lifted Further
    Lifting a trailer too much will also raise the center of gravity on the trailer which can cause sway and/or other handling problems. If you move your axle below the springs that should give you a decent amount of lift. If your current 13 inch wheels and tires would clear with this setup I would recommend you stick with that size. You can install taller hangers to lift the trailer even further, but I would be pretty cautious doing that since you already plan on raising the trailer with...
    view full answer...
  • Does Installing Trailer Over Under Axle Kit Void Insurance Policy
    Trailers pretty often come from the factory with the springs over the axle as well as axles over the spring. Either variation is not inherently more dangerous than the other so having installed an over under kit like the part # K71-384-00 would not void insurance on a trailer.
    view full answer...
  • Which Axle Over Under Lift Kit Fits 2020 Forest River Patriot with Lippert 3,500 lb Axles
    The Over Under kit part # K71-384-00 that you referenced is the correct kit you'd need. This is designed to fit 2-3/8 inch diameter trailer axles and allows moving trailer leaf springs to the top of axle or vice versa. This will give a lift right at 4 inches so it would be ideal for your customer!
    view full answer...
    Image 1 for
  • Can Different Leaf Springs be Used to Raise Height of Enclosed Cargo Trailer
    The standard amount of space that we recommend having between the top of your tires and the fender is 4" with your trailer unloaded. If this is shorter for your 2006 enclosed trailer then it is definitely wise to switch something up. The only way to really gain clearance by swapping out leaf springs is if your new springs have a larger spring stack than your older springs. So it has less to do with the weight capacity as it does with the dimensions of your leaf springs. You can switch...
    view full answer...
    Image 1 for
  • Can Over-Under Conversion Kit be Used to Lower Trailer With Axle Already Located Below Springs
    The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 is typically used to place the leaf springs on top of the axle (like you currently have) but I reached out to my contact at Dexter Axle and if you don't already have spring seats on the bottom side off your axle then the kit will allow you to move your axle above your leaf springs. This will lower your trailer the equivalent to the diameter of your axle (which for this kit is 2-3/8") plus the height of your leaf spring stack.
    view full answer...
  • How To Fix Loss of Ground Clearance After Replacing Leaf Springs
    I do have options to lift a trailer but changing out leaf springs or equalizers should not have much of an effect on this. In some cases, you can use a longer or shorter shackle strap to account for a different length leaf spring or equalizer. That said, best practice would be to choose the correct suspension replacements. I have attached our shackle strap options below. In regards to an actual lift kit, we do offer over/under kits like part # K71-384-00.
    view full answer...
  • Which Over Under Kit Fits Dexter Axle with 3500 lb Capacity
    From your axle label I can see that you have a 3,500 lb axle which would be 2-3/8 inches diameter and would be correct size for the Over Under kit part # K71-384-00 that you mentioned.
    view full answer...
    Image 1 for
  • Lift Kit For Trailer With 2-3/8 Inch Axle
    We do have one option to lift your trailer with a 2-3/8 inch diameter axles, which is the over/under kit you mentioned: - Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 I have added a link below to a video review of this part for you to check out as well if you'd like to take a look.
    view full answer...

< Previous
123. . .41

Do you have a question about this Trailer Leaf Spring Suspension?

Used Items Available
Used Picture for Dexter Trailer Springs Over-Under Conversion Kit
Used Picture for Dexter Trailer Springs Over-Under Conversion Kit
Used Picture for Dexter Trailer Springs Over-Under Conversion Kit

Condition: Missing Parts

Notes: Missing parts Other then that like new.

Our Price: $63.45
Secure Checkout

  • Why

    At we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video Edited:
Joshua S
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Kevin C
Test Fit:
Kevin C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.