bing tracking image
  1. Camper Jacks
  2. Lippert
  3. A-Frame Jack
  4. 3001 - 4000 lbs
  5. Electric Jack
  6. 1 Jack
Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black

Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black

Item # LC285318
Retail:$242.95
Our Price: $231.30
You Save: $11.65
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 29 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight. 1-833-496-1390 to order Lippert camper jacks part number LC285318 or order online at etrailer.com. Free expert support on all Lippert products. Great prices and Fastest Shipping for Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (171)
  • Q & A (0)
  • Photos
  • Why etrailer?

Lippert Camper Jacks - LC285318

  • A-Frame Jack
  • 3001 - 4000 lbs
  • Electric Jack
  • 1 Jack
  • Bolt-On
  • Lippert

Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.


Features:

  • Electric jack lets you raise and lower your A-frame trailer quickly and easily
  • 2 Toggle switches on the front of the housing let you operate the jack
    • On/off switch controls the light
    • Extend/retract switch controls up and down movement
  • Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation
  • LED light illuminates at a downward angle to help you focus on your coupler
  • Emergency crank (included) allows you to manually operate jack if needed
  • Heavy-gauge steel construction ensures durability and strength
  • Black powder coat finish resists rust and corrosion
  • Durable, textured-housing prevents chips and cracks
  • Easy bolt-on installation
    • Wires to 12-volt power source


Specs:

  • Bracket height:
    • Retracted: 10-3/4"
    • Extended: 28-3/4"
  • Lift: 18"
  • Travel speed (w/ 1,000-lb tongue weight):
    • Extends 6" in 41 seconds
    • Retracts 6" in 40 seconds
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Footplate diameter: 5-1/2"
  • Motor voltage: 12 volts
    • Power consumption: 30 amps
  • Lift capacity: 3,500 lbs
  • 1-Year limited warranty


This jack will take the work out of lifting and lowering your trailer. The 30-amp motor ensures trouble-free operation and consistent power with the flip of a switch - no need for a crank. It also has helical-cut gears, which have angled teeth that mesh together clearly. This allows for quieter, more efficient operation than a jack that uses a standard Acme screw.


To ensure great performance even at night, this jack also comes with a front-facing light that houses 3 LEDs. The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power.


This jack can be bolted or welded onto your A-frame coupler, or it can sit in a brace behind the coupler. As with other Lippert jacks, it is constructed of powder coated steel to ensure that it will resist rust and corrosion and hold up well to the elements. The housing on the jack protects the internal components, and it has a durable, UV-resistant coating that resists chips, cracks, and fading.


You always want to be sure when purchasing a tongue jack that the jack capacity at least matches your trailer's tongue weight (TW). Your trailer's TW should be around 10 percent to 15 percent of your gross trailer weight (GTW), which is the weight of your trailer when it's fully loaded. So if you have a 5,000-lb trailer you would want a jack that can support at least 500 lbs to 750 lbs.


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



285318 Lippert Components (LCI) Power Tongue Jack - A-Frame - 18" Lift - 3,500 lbs - Black

Installation Details LC285318 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black - LC285318

Average Customer Rating:  4.8 out of 5 stars   (171 Customer Reviews)

Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.

by:

The order shipped quickly and arrived when promised (via UPS). After removing the old tongue jack, the new Lippert jack installed in less than 45 minutes. Installation was straightforward due to the clear instructions included with the product. I have been very happy with all products purchased from etrailer.


Comments
The tongue jack is still working as advertised. No problems whatsoever.
Bill D - 11/07/2022


by:

I had my trailer tongue jack fail. I thought (hoped) it was just the actuator switch; replaced that but no luck. Found the exact same product through etrailer and purchased it (why not, the first one lasted for 8 trouble free years). The price was very reasonable and I received it a week sooner than promised. Installation was a snap- 3 bolts and connect a wire. Now on to more camping adventures!




by:

The bolt pattern matched my trailer so it was very easy. No skill needed. I soldered a connection on and hooked it directly into the battery. I had to drill a hole for my foot extension. So far so good. 23 foot travel trailer.


Comments
I wish I would have purchased it the same day I purchased the trailer. It’s super!!!
Roy - 06/14/2020


by:

Love it! No more hand cranking. Installation was a breeze. The trailer tongue has nut plates so it was a easy swap. No extra wrench to loosen the bolts.
I just crimped on a connecter on the end of the power wire, ran the wire through the factory clamps of the camper and put it on the positive side of the battery. Done! I kind of wish it had a slow and fast speed but no biggie. I really like the LED light on the front with its own switch. It adds to the “wow” factor. Thanks again etrailer! I never shop anywhere else.




by:

I purchased a used trailer that came with a cheap "Made in China" copy of the Lippert 3500 lb electric jack which the dealer had installed. It currently retails for $70.00. It failed after 3 years (trailer only 3 years old). So I bought the "real" deal this time. I had read previous views that said the Lippert 3500 was noisy. Mine barely makes a whisper and compared with my previous jack it doesn't make any noise at all. Etrailer even matched a competitor's low price. I couldn't be happier. Installed it yesterday and it moves up and down with ease. I'd give it and Etrailer 10 stars if I could.


Comments
My Lippert 3500 lb electric jack is still working greatsmooth, quiet, and powerful. I am still very happy with it.
Thomas - 09/17/2021


by:

My electric tongue jack arrived in two days, was easy to install and makes hitching an unhitching so much easier.


Comments
I’ve not had any problems in a year of constant use. This was a great purchase.
NK - 06/01/2019


by:

After installation it functions as expected. It raised the tongue of our Casita easily and quietly. It was easy to install on our Casita. It bolted right in. Most of the time taken for the installation had to do with routing the wire from the jack to a power source. I found a suitable power wire in the closet. I used a 10 gauge quick splice connector to make the power connection. It took some effort to get the wire from the jack into the closet. I was able to push a Phillip’s screw driver through to the outside after removing the cable clamp. I cut the red wire from the jack on the diagonal and used pliers to push the red wire through from the outside into the closet. Aside from using the jack today I can’t speak to longevity. It sure was nice not to have to manually perform this task.




by:

Have a 20/20 arctic wolf and this Jack is more stable and more efficient than what came with the trailer




by:

First of all , My compliments to the shipping department. I was actually impressed the way that the trailer jack factory package was secured in the etrailer outer shipping box.
Since I was basically just replacing a old jack that I damaged with a new one, the installation was easy. All works great, exceeds my expectations .




by:

Within an hour after receiving the Jack I had it installed and wired up , it’s a very easy installation , and it’s going to be a great timesaver


Comments
It’s working just like the day I install it just fine
Charles - 06/29/2019


by:

As always a big help in getting what I need, and wanted. Good tec help, fast service. Already installed.




by:

A great jack, works really well, powerful, good lift height, had a great fit onto the trailer itself, and seems very reliable.




by:

Fit perfectly easy to install. I used it on my 2013 keystone sprinter travel trailer.




by:

While I researched the large selection of trailer jacks on etrailer before making my purchase, what I tended to see (by a LARGE margin) at RV campgrounds was this product. So I bought it....quick shipping and super easy installation...in time for our latest camping adventure. It worked flawlessly on our Minnie and was a nice change from having to manually lift and lower my RV off/on my truck tow ball. I really liked the gearing as it was the perfect operating speed for me.


Comments
The jack continues to work flawlessly. the only thing I see to improve on is a slower full stop when retracting the jack and not the awful noise it makes when it hits its upper limit.
Carl - 10/30/2020


by:

It will be a while before I can install. Winter storm coming. The order was filled in a timely manner and I relied on the company from a previous order for a brake controller/cable to fit my Jeep Grand Cherokee.
The factory packaging however, was insufficient to restrain and prevent the triangular mounting flange on the lower end from punching through the cardboard packaging. The result was minor scratching and removal of paint on a corner tip of the flange.

There was no evidence of anything in the package to restrain the lower end from traveling vertically up and down toward the area where it punched through. So..I'd blame it on Lippert for insufficient product package restraints.


Comments
The Jack initially worked fine with the exception of the LED light. I reported my trouble shooting information to etrailer pinpointing the LED board. You were able to have a new board sent to me for replacement and everything worked well all summer after the replacement. The technical guidance you provided on how to open and access the case was first rate, but in this case, I needed to buy a longer screwdriver for the deeply recessed screws.
Craig - 03/22/2019


by:

well I have taken numerous camping trips with this jack and so far I am very pleased. one note is that if you don't have a dedicated ground wire you will need to make one on the camper or the jack will not operate. I figured that out right off the bat. It does move fairly slow, but hey I guess you don't want it moving too fast or you could over shoot your limits that can make the jack blow the 30 amp fuse. Yes I would highly recommend this jack. I have noticed that this jack is installed on a lot of brand new campers at the factory, so it must be a good jack. Highly recommend!!!


Comments
Very well! After numerous camping trips the jack has performed flawlessly!
Terry - 05/08/2019


by:

Happy with etrailer transaction as always. Disappointed with Lippert jacks as they do not hold up very well, but very aware that does not reflect on etrailer! Thanks for the service!


Comments
This does have a 1-year warranty. Please call Lippert for more details: 574-537-8900
-- Etrailer Expert Sierra K - 09/22/2021


by:

Absolutely great buy, one tiny thing would add significantly though, if you would include a $.10 wire connector it would make your package complete!




by:

The jack was a direct replacement of what was on the travel trail and it fit perfect and operates just fine




by:

It does what it needs to. Seems a bit slower than the original. After a year (and several months between use) the switch did act up but after several flips back and forth it did engage and work normally.




by:

Perfect replacement for disontiued model that wore out.




by:

Perfect fit . Works like a charm . Prompt service!




by:

Great jack, works every time flawless. Very easy to install with simple hand tools.




by:

It arrived quickly but, I won't be installing it for a while due to the 3 ft of snow


Comments
Installation was a breeze, works great, a real time saver
Denis G - 01/26/2022


by:

Replaced a Lippert jack that came with our RV after it died. Install was simple as this Jack gad the same footprint and wiring. Hardest part was using jack stands while I was doing the swap. This jack has been flawless since the install a year ago.



25
171
Show More Reviews

See what our Experts say about this Lippert Camper Jacks

  • How Does an Electric A-Frame Trailer Jack Get Power
    A-Frame powered trailer jacks such as # LC285318 get power from a trailer mounted battery and not from AC shore power unless there is a converter than converts the AC power to DC power and it is then connected to the jack. This would be uncommon.
    view full answer...
  • Can Lippert Components Power Tongue Jack # LC285318 Mounting Plate be Rotated
    The Lippert Components Power Tongue Jack # LC285318 uses a standard 3-bolt a-frame type mounting scheme. It is designed to be installed in a specific orientation with the point of the triangular mounting plate facing the tow vehicle as with most of the similar a-frame jacks shown on the linked page. This is not a manufacturing error. It is not possible to rotate the upper head portion to face in another direction. It is certainly possible to have a piece of steel plate welded on the trailer...
    view full answer...
  • Powered Trailer Jacks Operate Opposite of Desired Direction When Switch is Pressed
    It sounds like you simply installed your wiring leads reversed from their correct locations. You'll just need to swap the positions of the wires to the motor. This is not an uncommon issue when parts are replaced. You should have 4 wires on your switch, two red and two black, of different lengths. You want to wire the two longer wires as follows: the longer red wire (without fuse holder) goes to the motor's red wire; the longer black wire goes to the motor's yellow wire. The shorter wires...
    view full answer...
  • Can the Lippert Tongue Jack Head Be Rotated and Realigned
    I spoke with my contact at Lippert and he confirmed that the Lippert Components Power Tongue Jack 1817941 # LC285318 can be rotated to be best orientated for you. The jack can be un-bolted, rotated, and reinstalled.
    view full answer...
  • Can Head of an Electric A-Frame Trailer Jack be Rotated to Clear Lowered Tailgate
    You can rotate the whole trailer jack, such as # LC285318 or another A-frame mount jack, by unbolting it from the trailer, turning it, and bolting it back on. You would not be able to rotate just the head by itself.
    view full answer...
  • Removing the Cover on Lippert 3.5K Powered A-Frame Trailer Jack
    I have included the video and a link to the original answer page that also has the video you are looking for. There are 4 screws on the bottom of the bottom cover holding it to the top. And if you remove the cap on the very top of jack # LC285318 you will see 2 more screws. With all the screws removed you should have no problem with the cover.
    view full answer...
  • Troubleshooting Malfunctioning Powered Trailer Jack
    I'd recommend examining the connections between the jack and the trailer battery. Is the power connection between the battery secure? The jack picks up its ground connection by being in direct contact with the trailer frame, so be sure that the connection between the jack and the trailer is secure and isn't corroded. Make sure the trailer mounted battery that powers the jack is properly grounded to the trailer frame.
    view full answer...
  • Electric A-Frame Trailer Jack Does Not Have Any Power After Sitting for a Year
    On electric trailer jack # LC285318 there is a fuse that you can check. It is in line with the power wire. I have included a picture of what you will be looking for. If the fuse is not the issue then it is likely a ground problem. This jack grounds through where it mounts. You would need to un-bolt it from the trailer and clean away any dirt and corrosion on the trailer and the underside of the bracket on the jack. You may also need new hardware if it is also corroded.
    view full answer...
    Image 1 for
  • Can a 3,500 Pound Electric A-Frame Trailer Jack Handle Tongue Weight on 4,900 Pound Trailer
    The tongue weight of a trailer is typically 10 to 15 percent of the gross trailer weight but could be more. That would make the tongue weight of your trailer around 490 to 735 pounds. An electric jack rated for 3,500 pounds, such as # LC285318, would work well for your trailer. The higher the capacity of the jack the easier it will be for it to do its job meaning it will last longer.
    view full answer...
  • Replacement Electric A-Frame Trailer Jack for a 9,000 Pound Dutchman Travel Trailer
    A 9,000 pound trailer should have a tongue weight of 900 to 1,350 pounds, maybe a little more, so any jack that has a capacity higher than the tongue weight would work. But the higher the capacity of the jack the easier it will be for it to lift the trailer and the longer it will last. That is why I recommend going with the Lippert # LC285318 Powered A-frame jack. It has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel....
    view full answer...
  • Lippert Electric A-Frame Trailer Jack Stopped Working
    When an electric trailer jack of any kind stops working there are a couple of things to check. First, the jack may or may not have an in line fuse that you can check and replace as needed. Some jacks also have an internal circuit breaker which should reset by itself. But if it doesn't then there is likely something wrong with it and the jack would need to be replaced. A ground interruption can also cause the jack to stop working. If there isn't an obvious ground wire to check then the...
    view full answer...
  • Troubleshooting Lippert power Tongue Jack When LED lights Stay On
    The LED lights on the # LC285318 should not stay on all the time. On the front of the jack there is an on/off switch that is used just for the lights. Make sure that switch is flipped to the off position when the lights are not needed. The other switch is for retracting and extending the jack. I called my contact at Lippert and they told me that if the switch is in the off position and the lights remain on, you may have a problem with a short in the switch, or a short in the circuit board....
    view full answer...
  • Electric A-Frame Trailer Jack Only has Intermittent Power
    It does sound like there could be some loose wiring in the jack head or it could also be a bad switch/dirty contacts for the switch. Most electric jacks you can take apart to access these components to repair or replace parts as needed. If that does not solve the problem then the first thing I recommend checking on your powered trailer jack is the ground connection. Over time a ground connection can get corroded and cause a poor ground so the circuit is not completed. Many electric trailer...
    view full answer...
  • Can Just the Head of an Electric A-Frame Trailer Jack be Rotated 90 Degrees
    There isn't an easy way to rotate just the head on an A-frame trailer jack such as # LC285318 or your 1817941. What you can do is rotate the entire jack and bolt it back down. This will result in a greater than 90 degree rotation but is the only way that you could turn an A-frame jack.
    view full answer...
  • Lippert Electric A-Frame Trailer Jack Keeps Blowing the 30 Amp Fuse
    What is probably occurring on your jack is that it has been extended too far at some point and has become stuck. Trying to move it in either direction draws too much power as the motor tries to push the leg free. This cause the fuse to blow. What many electric jack manufacturers will do is to smash or otherwise distort the end of the screw that turns to move the leg up and down to prevent it from extending to far. If it does end up extending too far the threads will become permanently...
    view full answer...
  • How Many Amps does the Motor Draw for the Electric A-Frame Tongue Jack, # LC285318
    According to the specifications of the Electric A-Frame Tongue Jack, # LC285318, from Lippert, the jack motor can draw a maximum of 30 amps at 12 volts. The closer to the capacity of the jack (3,500 pounds) the more power it will draw. I have included a link to all of the powered jack options we carry for you to view.
    view full answer...
  • Can Head of Lippert Electric Trailer Jack LC285318 Be Rotated 90 Degrees to Clear Lowered Tailgate
    The mounting plate on the Lippert electric jack # LC285318 is designed in such a way that it would not line up quite right if you turned the jack (the head by itself cannot be turned). The easiest solution to this problem is to use a longer ball mount so there is plenty of room to lower the tailgate. I have included a link to our ball mount main page for you. Compare the length of your existing ball mount with ones we carry with the same rise/drop and capacity to find one that is longer.
    view full answer...
  • How to Remove Cover of Lippert Tongue Jack LC285318
    There are 4 screws on the bottom of the bottom cover holding it to the top. And if you remove the cap on the very top of jack # LC285318 you will see 2 more screws. With all the screws removed you should have no problem with the cover. These very narrow holes will require a long and thin phillips head screwdriver.
    view full answer...
  • Troubleshooting Lippert Powered A-Frame Jack that Stops Working Occasionally
    It could be as simple as a loose power wire or an intermittent ground. Check the condition of the power wire attachment and then check to make sure the main ground of your trailer is connected to a clean metal surface. Next time it locks up try running a jumper wire from a car battery's positive power post and then ground the negative post of the battery to the trailer frame. If you see the jack start to work normally at this point then the problem is in the wiring. Otherwise it's an internal...
    view full answer...
  • Does the Lippert LCI Electric Tongue Jack # LC285318 Require Grease Maintenance?
    According to our friends at Lippert their Electric Tongue Jack # LC285318 is a sealed unit that wouldn't require adding grease, therefore they didn't include a grease zerk which explains why you are unable to locate one. I will be sending you a copy of the owner's manual in a separate email for you to check out. If you are having any problems with the jack get back with us and we'd be happy to help!
    view full answer...
  • Troubleshooting Powered A-Frame Jack that Has 12 Volts Power But Does not Function
    The fuse being left in really shouldn't have caused an issue. Most likely your problem is a bad ground for the jack though. The # LC285318 grounds through the mounting hardware so what you would need to do is run a jumper wire from between the track jack mounting bracket and the mounting bracket of the jack back to the ground wire of your trailer wiring or to negative side of trailer battery if it has a battery. That should get your jack working again.
    view full answer...
  • Electric A-Frame Trailer Jack Does Not Run and Light Does Not Work
    If the electric jack's fuse is blown that would explain everything. Some jacks have an external fuse like # LC285318. Others will have it or a circuit breaker inside of the unit to where you would have to remove the covers to access it. It could also be a bad ground or a drained battery. If there isn't a separate ground wire then the jack grounds through where it is mounted. That surface will need to be clean and free of corrosion for a good ground connection. And if the battery that drives...
    view full answer...
  • Will Electric A-Frame Tongue Jack # LC285318 Clear the Propane Tanks on a Trailer
    I went out to the warehouse to take some measurements on the Electric A-Frame Tongue Jack, # LC285318. When fully retracted, the distance from the jack foot to the bottom of the mounting bracket is 10-3/8 inches. From the center of the jack to the back of the housing is 2-3/4 inches. The distance from the center of the jack to the front of the housing is 6-3/4 inches. From the bottom of the housing to the top of the bracket is 10-3/8 inches.
    view full answer...
  • What are the Dimensions of the Head on the Electric A-Frame Trailer Tongue Jack, # LC285318
    I went out to the warehouse to measure the head of the Electric A-Frame Tongue Jack, # LC285318. It measures 6 inches wide from side to side, and 8-3/4 inches wide from front to back. The overall height of just the head is 10-1/2 inches.
    view full answer...
    Image 1 for Image 2 for


< Previous
123. . .12



Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew L
Video Edited:
Andrew L
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristen H
Updated by:
Kristen H
Employee Brian T
Updated by:
Brian T
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.