Replaces a left-side, short, rear leg for your Lippert Ground Control 3.0 automatic 6-point leveling system (LC675817). Includes mounting plate and attached foot plate.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at Lippert's replacement rear leg for the ground control three leveling system. These are available for either the left or the right for either your four point or six point leveling system. These jacks are going to be a direct replacement for your factory originals. So whether your jacks are worn out and no longer functioning from age, or if you had some sort of collision that's damaged them, these are a nice easy replacement. And you don't have to replace your entire system, just that particular damaged jack.The replacement jack only includes the jack, so you want to make sure that you save all of your mounting hardware to get your new one installed. On the six point replacement jack, the foot pad is made onto the jack.
However on the four point system replacement jack, the foot pad is removable, and the pin that holds it on does not come included. So you want to make sure that you maintained your pin from your original jack. If need be, you can purchase additional replacement pins here at etrailer.com.With these replacement jacks, you can have the comfort of knowing that they are factory original replacements, and they're going to bolt right up guaranteed. Our motor's burnt out on this one here, so we're going to need to replace it. We'll begin the replacement by disconnecting the electrical connectors.
So you're going to want to follow the leads from the motor, pull those down. You'll disconnect them by pressing on the release tab, and pulling them apart.Next you'll simply need to remove all the bolts that are holding it in place. On our particular unit here, we're going to be using a 19 millimeter socket and wrench to remove those. To get to the top ones, I recommend only removing them partially, leaving some of the nuts still threaded on to hold it in place because it is quite heavy.Now we've got them most of the way removed, you can support your jack and remove the rest of the hardware by hand. I like to just leave the bolts in there and just remove those with the jack.
We'll now set it down and get our replacement. An exact replacement for the factory originals, and it installs just in the reverse order of how we removed it. Now when you removed your old one, you want to remember which holes that you used because it does have a height adjustment with these holes. If you're questioning it, you can always take a peak at the other side because the other side is going to have the same distance as this side.With all of our bolts in place, we can tighten them back down using that 19 millimeter socket and wrench. Then torque it to the manufacturer's specifications.
Now we can plug in our electrical connectors. And you're all set, ready to go on your adventures again. And that completes our look at Lippert's replacement rear leg for the ground control three leveling system.
Average Customer Rating: 4.6 out of 5 stars (22 Customer Reviews)
Replaces a left-side, short, rear leg for your Lippert Ground Control 3.0 automatic 6-point leveling system (LC675817). Includes mounting plate and attached foot plate.Jack fits perfectly. Sad that we have to buy the motor on these rear jacks when all that is wrong is the jack/leveler is bent due to my hitting an edge of asphalt backing up.
We buy the front leveler without the motor as an option. Tell Lippert to get with it.
4 year full time in Solitude.
Works good just a little shorter when retracted to give better clearance.
Fits replacing OEM on keystone cougar travel trailer. Pluged and bolted in, in just a few minutes.
Works great, easy DIY installation and adds 3-4” of clearance.
Pricy but worth it!
Unfortunately the right side leg was delivered. I ordered a replacement left side leg. Very quick customer service response with a return shipping label in the works and a correct left side leg re-ordered. Will update my overall rating when I receive correct part.
Easy to install and was delivered in a timely manner perfect fit to oem parts
I am not one to do reviews but once again etrailer did it right. They promised the product before my trip this weekend and they made their promise. Excellent customer service. I will never buy from anyone else. Thanks again for your amazing service
Item arrived on time. Packaging was grea,t no damage.
I had a problem with 2 of the Lippert jacks not fitting my trailer. Carmel of etrailer went far and above the call of duty and worked with the company to send me the correct shorter jacks. etrailer.com is great to work with because of personnel like her. BTW, the Lippert Ground Control 3.0 System installed easy enough and works great. Thank You etrailer.com for a great deal.
Wally S - 01/09/2019our 2015 avalanche has hydro landing gear and just electric at the back. BUT the frame has the other 4 spots for 6 point leveling. so i bought these for the after the rear tires jack spots to help level and stabilize the rv. worked perfect. holes lined right up and with the short jacks (not standard height, there wasn't enough top clearance for those) there's plenty of ground clearance jacks all the way up. i got a momentary up down switch on amazon and with my jump box i move the jacks manually to get everything level and secure. a lot cheaper and just as good solution as getting aftermarket 6 point hydro jack setup.
Service was great. First time using you folks and all the reviews were right on.
Purchased this item as a replacement for our Coachman x-lite. The existing jack got bent and would not operate. Having had a previous purchase from etrailer, this was my go to for this item. Prices are great, items received in great condition and very quick shipping. Will continue to check this vendor first when items are needed.
Not only the product is all I could have hoped for, the service received during the ordering process was excellent.
Pretty easy install. Hate that I had to replace my original after 3 years. Works well.
Great service and fast delivery, have used you guys before and will definitely do so again.
Easy to install, worked great
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.