bing tracking image
  1. Accessories and Parts
  2. Lippert
  3. RV and Camper Bike Racks
  4. Receiver Adapter
Bump-It Hitch Receiver Adapter for Jack-It 2 Bike Rack

Bump-It Hitch Receiver Adapter for Jack-It 2 Bike Rack

Item # LC723359
lowest price pledge
Our Price: $60.14
You Save: 21%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 7 lbs
In Stock
Lippert Accessories and Parts - LC723359
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The Bump-It adapter lets you attach your Jack-It 2 bike rack to your vehicle's 1-1/4" or 2" hitch receiver for easy transfer between your travel trailer and tow vehicle. Mounting hardware included. 1-636-306-4830 to order Lippert accessories and parts part number LC723359 or order online at Free expert support on all Lippert products. Guaranteed Lowest Price and Fastest Shipping for Bump-It Hitch Receiver Adapter for Jack-It 2 Bike Rack. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (41)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Lippert Accessories and Parts - LC723359

  • RV and Camper Bike Racks
  • Receiver Adapter
  • Lippert

The Bump-It adapter lets you attach your Jack-It 2 bike rack to your vehicle's 1-1/4" or 2" hitch receiver for easy transfer between your travel trailer and tow vehicle. Mounting hardware included.


  • Adapter slides into rear hitch receiver and creates a hitch-mounted option for your Jack-It 2 bike rack (LC429756 - sold separately)
    • Makes it easy to transfer your bike rack between your travel trailer and tow vehicle
  • Fits both 1-1/4" and 2" receiver openings
    • Jack-It base secures to Bump-It with included pin and clip and hardware


  • Total length: 22-1/2"
  • Approximate clearance between end of receiver tube and bike rack: 17"
  • Weight capacity: 80 lbs

723359 Lippert Components (LCI) Bump-It Receiver Adaptor for Jack-It 2 Bike Rack BikeWing Base- 1-1/4" and 2" Receivers

Installation Details LC723359 Installation instructions

Video of Bump-It Hitch Receiver Adapter for Jack-It 2 Bike Rack

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Lippert Bump-It Hitch Receiver Adapter Review

Colin: Hey, everyone. It's Colin Here at etrailer. And today we're going to take a look at the Bump-It Hitch Receiver Adapter for the Jack-It 2 Bike Rack. Now, as you can see I've got the Jack-It Bike Rack right here completely assembled. If you don't already know what this is, this is a bike rack that will go over top of your trailer jack on your A-frame trailer that's commonly used for bumper pull travel trailers so you can get a couple of bikes loaded up between your truck and your trailer so you don't have to waste space in your truck bed or inside your camper.Now, with the Jack-It only having one use and that's on those tray A-frame trailers, the Bump-It Adapter is going to give you another option to be able to use it for the hitch receiver of any vehicle in your household, whether it's 2" or 1-1/4". That eliminates the need to have to get another bike rack just to be able to carry your bikes 10 minutes down the road to a bike trail.

Now we've got the adapter installed in our hitch right now. Let me just show you guys what piece you need to pull out of your Jack-It and set it in place on your adapter.The only thing we need to do is remove this anti rattle bolt right here that's holding the wing into the Jack-It Bike Rack. We'll just loosen it up. And we'll remove the clip as well. There is a small wrench that comes in the kit.

However, in my opinion, it's just a little bit easier to loosen it up with that ratcheting wrench. And then we can just loosen it with our hands from here.And then we'll just pull it out and then we can get the bike rack out of the Jack-It. Now with your Bump-It Adapter, you want to make sure when you install it that you have this gusset right here facing down. And then we'll just drop the bike rack into the adapter. And then reusing the hardware from the Jack-it, just this anti rattle bolt, I'm just going to lift up a little bit on the bike rack and feed it all the way through and then thread it on.Once you get it as far as you can with your hands, like I said, just grab that 3/4" socket or you can use the little wrench that's included.

Tighten it up all the way. It is the same size wrench for this bolt as it is for the anti rattle bolt that comes with the Bump-It Adapter. Put the clip on. From here you're ready to load up your bikes. And with the bikes loaded you can see it was a very easy process to be able to utilize our Jack-It Bike Rack in multiple different ways, not have to purchase a second bike rack to take a 10 minute trip down the road.

And it was a very cost effective solution as well.Now I'm going to go ahead and unload the bike so we can have a closer look at the adapter itself. Now the Bump-It Adapter is going to have the same sturdy steel construction that the bike rack has with a nice black powder coat finish so it's going to resist rust and corrosion and it matches everything very well. Now it also is going to have an 80 pound weight capacity. That is the same weight capacity as your Jack-It Bike Rack so nothing really changes right there. Just make sure you don't exceed that.And it does come with this nice anti rattle threaded hitch pin. When you get it secured in your hitch receiver, whether it's 2" or 1-1/4", you're not going to have any movement inside that hitch. That eliminates rattling around and the up and down movement as well. Now on the inside of the receiver is this sleeve that is making it compatible with our 2" receiver. All you would do is pull the shank out of the receiver, use the included Allen tool to remove the sleeve, and that'll make this compatible with 1-1/4" hitches.Now I'll give you guys a measurement just to make sure that this will work for your vehicle. Now if you measure from the face of your hitch to the edge of the Bump-It Receiver where the bike rack will insert is going to be about 17". You probably want to have at least that so that you can fit both the bike rack and your bike loaded on the front side right here. And then the total length added on from the face of your hitch receiver to the outermost point of the Bump-It Adapter is going to be 17-3/4".Now keep in mind that with your bike and especially these pegs added onto the back that it is a little bit more space. These pegs are about 6" long, so you do have that added length and especially if they have that bike, keep that in mind. But this is definitely something I would buy if I owned it the Jack-It Bike Rack already. And like I said, just because it's going to be a very cost effective way for me to use the bike rack in different applications and not have to get a second bike rack just to take that 10 minute trip down the road. And I think you guys are going to be very happy with it.

Customer Reviews

Bump-It Hitch Receiver Adapter for Jack-It 2 Bike Rack - LC723359

Average Customer Rating:  4.9 out of 5 stars   (41 Customer Reviews)

The Bump-It adapter lets you attach your Jack-It 2 bike rack to your vehicle's 1-1/4" or 2" hitch receiver for easy transfer between your travel trailer and tow vehicle. Mounting hardware included.


I purchased the Bump-it hitch adapter along with the Jack-it bike rack. In doing so, I am able to tranport my bikes directly to my receiver when I am not towing my RV. It is a great accessory to the Jack-it bike rack.


Put it on the car we use to pull the trailer, them installed the Jack-It bike rack and put 2 bikes on it. It felt very solid on the test drive I took, even more than our regular Yakima twin carrier.


Seems to work as advertised, assuming the rack itself actually works for your bikes (it did not work for ours). Might be worth the money just to have a way to figure out the adjustment of the bikes before putting it onto the trailer, where they will probably be above your head. Adjusting the rack to fit the bikes is a very finicky process.


Works great with the bike rack. Great customer service!


We ordered a “Bump It” to allow the use of the “wings” section of our recently purchased ”Jack It” bike rack on our tow vehicle.

Like the “Jack it” the “Bump It” is very well designed and made! It will, no doubt, provide many years of service!

The “Bump It” is easy to use. Just slide it into the receiver, bolt it, then remove one bolt from the “wings” section of the “Jack It”, move the wings over and rebolt. Load the bikes and you’re off into greatly expanded biking options without the need for a second bike rack!

When used on our truck, the “Bump It” provides good ground clearance for our 27” bike tires, and a generous 19” or so for the inside bike.

Vey pleased with the “Bump it” devise. It is well built and performs as expected. It’s great to find a product that exceeds expectations!! I built an upright “T” bar for the “Bump It” to act as a support for for use when hauling long loads in the truck.
Jim L - 09/09/2021


I did lots of research ahead of time. Website on e-trailer is super helpful. I haven't finished the jack-it installation yet but the bump it has gone very well.


This is exactly what I need to take my bikes to a trail or other destination outside of our campsite. Easy setup and sturdy. I am looking forward to many years of service with this product. E-trailer shipped it quickly to my door.

James H - 08/30/2021


arrived intact, exactly what I ordered. already have the jack-it for my travel trailer, now I can use it on my truck.


We installed the Lippert bike rack over the power jack on our Lance trailer and have used it for around 600 miles so far. This replaces a two bike rack on the back of the trailer which was causing some swaying issues. After we drop our trailer, we like to take our bikes on our tow vehicle for trail or road rides but had been using a conventional two bike Thule rack which takes up space we could use for other things. The Bump-It Receiver Adaptor lets us install the Jack-It 2 Bike rack on the tow (or any) vehicle with a hitch with very little assembly. Frankly, mounted on the Bump-It is the best way to do a careful fit of the bikes on the Jack-It 2 since you are working close to the ground. I have labeled the "wings" of our Jack-It so they will go on the same way each time. I don't know that it really matters but I load the Jack-It on the Bump-It Receiver as though the back of the tow vehicle is the same orientation as the front of the trailer.


Works as advertised.Found it on youtube.


If you buy the Jack-It 2, the "Bump-It" receiver is an excellent option. We used it to haul our bikes to a trail 30 miles from our campground, where the Jack-It 2 remained with our camper.


Easy to install. Good instructions. Love how easy this system will be to navigate between truck and camper trailer.


Great - easy & efficient to find product & order. Arrived quick.


Hooked up on car great to have if not c amping


Works great

Still working great
Anne W - 02/12/2022


Works great with the Jack-it bike rack on our Yukon!


Nice addition. Now I don’t need to carry a second bike rack for the hitch.


My wife talked me into buying the Jack-it 2 bike rack when she showed me the bump-it Hitch. I didn't like carrying bikes on the back of the trailer where I couldn't see them and then I needed a bike rack to transfer them from our campsite to the trail we wanted to ride. This solved both issues. Some people may have issues getting the bike on the rack while its on the trailer. I'm over 6 feet tall and my bikes are light so its not that hard for me. I have a friend who stands on the tailgate of his truck to put his bikes on the rack


Works great! Love it!! It allows me to transfer my bike rack from my camper to my car when I get to my campsite!


I received the item ordered very quickly and just on time before my camping trip and perfect fit and great service from with rapid transaction and fast delivery and follow up with order!
Very satisfied and will order again more stuff!


Great idea to allow me double use of my bike rack on either the trailer or the car.


Great idea and we love it as a mate to our Jack it bike rack!!


Haven't used this part yet, but seems to be of good build. This piece makes the Jack-It bike stand serve dual purpose.


This makes the bike rack more useful when not using the camper.


Bumper hitch works well. Very happy with purchase.

Show More Reviews

See what our Experts say about this Lippert Accessories and Parts

  • Best Bike Rack Solution that Allows Bikes to be Carried When Towing and When Unhitched from Trailer
    I have a great bike rack option for what you are wanting. The Lippert Jack It part # LC429756 attaches to the jack mounting hardware on your A-frame trailer and allows you to carry two bikes when you are towing. Then when you aren't towing you use the Bump It adapter part # LC723359 and you now have a bike rack that fits in your vehicle's trailer hitch. This adapter also can fit in 2 inch or 1-1/4 inch hitch openings so it will work great in your 1-1/4 inch hitch.
    view full answer...
  • Can Lippert Jack It Bike Rack be Adapted to Fit 2 inch Trailer Hitch
    Yes there is! The Bump It adapter part # LC723359 is designed to fit the Jack-It 2 Bike Rack # LC429756 and allow it to fit a 2 inch trailer hitch like what you are interested in doing.
    view full answer...
  • Bike Rack Solution for 2016 Jay 12UD Camper
    I checked out your Jayco 2016 Camper model 12UD and I think you'd really like the Jack-It 2 bike rack part # LC429756. This attaches to your trailer jack mount and gives you a 2 bike rack that is held above the propane tanks. Then if you ever wanted to mount the rack in a hitch you could use the # LC723359 to convert it to a hitch rack.
    view full answer...
  • Is Bumper on 2020 Palomini Strong Enough for a Trailer Hitch and Bike Rack
    Some bumpers are strong enough for a bike rack while others are more for show or to help lessen the impact of anything at the back of the trailer. I did some checking with Palomino and they say that their bumpers/frames were not designed to accommodate a hitch. If you want to avoid doing this we still have an excellent solution for you with the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756. This bike rack is designed to install in the same location as your A-Frame jack and it has...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch Adapter Availability for Lippert Jack-It Bike Rack
    Lippert actually recently came out with the Bump-It Hitch Receiver Adapter # LC723359 (after the other Expert's question was posted) which is a supplement to the Jack-It 2 Bike Rack # LC429756 so that you can easily carry your bikes either on the tongue of your trailer or at the rear of your vehicle!
    view full answer...
    Image 1 for
  • Can Lippert Jack-It Bike Rack Fit 16 ft Casita Trailer
    Yes, your 16 foot Casita trailer has an A-frame jack on it so the Lippert Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 will fit it and work well. To convert this to a hitch mounted bike rack so that you could use it in the hitch of your vehicle you'd just need the Bump It part # LC723359 and you'd be set. I attached review videos for both of the Lippert options I mentioned as well.
    view full answer...
  • Could Lippert Jack It Bike Rack # LC429756 Install in 2 inch Trailer Hitch
    While the square openings you mentioned on the Lippert Jack It part # LC429756 are 2 inch by 2 inch if your plan was to install this in a 2 inch hitch you'd also need the Bump It adapter part # LC723359 designed specifically for this application!
    view full answer...
  • Bike Rack Recommendation for Front of A-Frame Trailer and Trailer Hitch
    What's great about the Lippert Jack-It part # LC429756 is that you can actually adapt it to fit a hitch instead with the part # LC723359 so that it would cover both of your needs easily and reasonably. I think this is your best option overall as it doesn't require additional adapters and a more expensive bike rack as well. If you check out the review video I attached for the Bump It you can see how easily it converts to being a hitch rack as well.
    view full answer...
    Image 1 for
  • Jack-It 2 Bike Rack for A-Frame Trailers and Fat Tire Bike
    Yes the Jack-It 2 Bike Rack for A-Frame Trailers, # LC429756 will work with fat tire bikes. Please see the attached video for product review and mounting to provide a good visual of the installation and use of this bike rack. Don't for get to get the add on component of the Bump-It Hitch Receiver Adapter for Jack-It 2 Bike Rack Item # LC723359. This bump-It adapter lets you attach your Jack-It 2 bike rack to your vehicle's 1-1/4" or 2" hitch receiver for easy transfer between your...
    view full answer...
  • Recommended 2-Bike Rack for 2019 Airstream Nest Travel Trailer
    I recommend checking out the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 for your application. This installs in the same location as your A-Frame jack and sits high enough that it should clear your front storage compartment (see attached photo). In addition to this being installed on the trailer you can pick up the Bump-It Hitch Receiver Adapter # LC723359 so that you can use this bike rack on your Tundra once you've reached your campsite. Attached are some review videos for you...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Can The BikeWing 2 Bike Carrier Be Used On The Rear Of A Camper?
    I spoke with Lippert, and with use of the Bump-It Hitch Receiver Adapter for Jack-It 2 Bike Rack # LC723359 will be able to mount the BikeWing 2 Bike Carrier for BikeBase or Bump-It Mounting Adapter # LC731137 to the rear of your camper.
    view full answer...
  • Recommended Non-Hitch Bike Racks for a 2018 Forest River Flagstaff Micro Lite 25BDS
    I can't really speak to your concerns about the strength of the bumper on your 2018 Forest River Flagstaff Micro Lite 25BDS but I can speak to the ladder bike rack concern. The Stromberg Carlson 2 Bike Carrier # LA-102 itself only weighs 7 lbs and it has a weight capacity of 25 lbs per bike. That means the most weight you will be putting on your ladder is 57 lbs which isn't a whole lot considering that ladder is meant for grown adults to climb. Another option that you may not be aware...
    view full answer...
  • Bike Rack Compatible with A-Frame on a 2019 Rockwood Mini
    The Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 unfortunately is not designed to be used in any other way and there aren't any other adapters for it except for the Bump-It Hitch Receiver Adapter for Jack-It 2 Bike Rack # LC723359 to allow the use of a normal trailer hitch receiver that is either 1-1/4 inches or 2 inches. That is designed for vehicle use and not RV use, so it may be wise to sell your current rack and get something that will work with your trailer. A better option...
    view full answer...
  • Availability Of Locks Compatible With Lippert Jack-It 2 Bike Rack LC429756
    I have an option for you, but there is not a locking anti-rattle bolt made for the Lippert Jack-It 2 Bike Rack # LC429756 or Bump-it # LC723359. Since they both include anti-rattle bolts already you can secure them by using the etrailer Cable Lock - 10' Long # e98891. I included videos of the products mentioned for you to take a look at.
    view full answer...
  • Is the Lets Go Aero NEO2 2-Bike Rack Safe for a Travel Trailer
    The Lets Go Aero NEO2 2-Bike Rack # B01748 is safe to use on passenger and motorized vehicles so a motorhome would be fine. It is not approved for use on a travel trailer or 5th wheel like you mentioned. Your photo didn't come through but this may have been from an old description as these are prone to change from time to time depending on the manufacturer. For a similar bike rack I recommend checking out the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756. This mounts at the same...
    view full answer...
  • Can I Tow a Trailer and Use a Trunk Mount Bike Rack on My 2016 Toyota Highlander
    If your trailer has a straight tongue, like a boat or kayak trailer, then you might have enough room under your bikes to be able to use the Malone Runway Trunk Bike Rack # MPG2142 on your 2016 Toyota Highlander while also towing, but there are variables that I can't really address; like how tall are your bikes, where exactly the rack arms sit in regards to the height of your hitch receiver, and if your trailer coupler height needs a straight ball mount or one that has a drop or rise. Because...
    view full answer...
  • Carrying Bike Rack on 2021 Toyota 4Runner that is Towing Trailer
    It's actually not recommended to tow a trailer with a trunk mounted bike rack for clearance reasons but we do have a great solution with the Lippert Jack-it # LC429756 which installs by attaching under the jack mounting flange and allows you to carry two bikes above the propane tanks. Then to use it in a hitch you'd want the # LC723359.
    view full answer...
  • Cable Lock Recommendation for Jack-It 2 Bike Rack for A-Frame Trailers
    Aside from the part number of the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756, the only other part number mentioned is the cable lock CAB-10. This was rebranded as an etrailer cable lock and can be found now as part # e98891 on our site. Some additional accessories we have for the Jack-It are the Bump-It # LC723359 adapter for a standard hitch receiver and the Straight Shank # LC67HD if you want to avoid having the bikes directly above your propane. If you are looking for something...
    view full answer...
  • Can SeaSucker Monkey Bars be Installed on Tear Trailer to Carry Bikes
    Although the SeaSucker Monkey Bars # 298-SX6000B would fit they do make me a little nervous since your trailer slopes down going from the front to the back. These vacuum cups each have a pull strength rating of 210 lbs but at that slope it would put more weight at different areas for both the roof rack and any bike rack that you would use. A better option for your situation might be the Jack-It # LC429756 which mounts in the same location as the A-Frame jack and fits around jacks that...
    view full answer...
    Image 1 for Image 2 for
  • Bike Rack Recommendation for Truck and Travel Trailer
    We have a handful of bike racks that can be used for your Toyota Tacoma as well as a travel trailer and if the hitch on your future trailer mounts to the frame of the trailer, like what we see with the Curt Hitch # 13703, then I can't recommend the Kuat Transfer V2 # KU84FR highly enough. This rack not only looks great but also has a unique U-Shaped frame that makes loading and unloading bikes a LOT easier than the standard platform rack. If the hitch on your trailer mounts to the bumper...
    view full answer...
  • How to Carry 2 Bikes While Towing with a 2017 Nissan Titan
    The Curt Front Mount Trailer Hitch Receiver # C31077 is a fit for the 2017 Nissan Titan XD but not for just the Titan model. It looks like the mounting brackets for the front mount hitches between the two trucks have been different in the past which would be why you can't interchange them here either. I checked with our hitch manufacturers and none of them have a front hitch listed for a 2017 Nissan Titan but if you let me know what you were planning on using it for I can see if we have...
    view full answer...
  • Can BikeBase Trailer Tongue Adapter for BikeWing Carrier Work on Ball Mount
    You actually already mentioned the better option in your question, because I do not recommend using the BikeBase Trailer Tongue Adapter for BikeWing Carrier # LC731157 with the BikeWing 2 Bike Carrier for BikeBase or Bump-It Mounting Adapter # LC731137 on an extended length ball mount. The issue is that it is meant to fit 2" to 4" trailer tongues and I can't guarantee that this is going to be secure enough around a ball mount that fits in a 2" receiver. Instead, if you have the necessary...
    view full answer...
  • Can the Kuat Sherpa 2.0 Bike Rack be Used at the Back of a Travel Trailer
    You can technically use the Kuat Sherpa 2.0 Bike Rack # SH22G at the back of a trailer like what you mentioned because it will fit, but Kuat hasn't tested and approved their bike racks for use at the back of a trailer so if any damaged were to occur to the bike rack because of the extra movement then that wouldn't be covered under their warranty. An alternative bike rack that has been tested and approved for use on a trailer is the Yakima OnRamp # Y36FR. I really like this rack simply...
    view full answer...
  • Towing Bike Rack Availability with 5 Drop Ball Mount for Towing Vintage Trailer
    We do have ball mounts with a 5" drop that you can use with the Swagman Traveler XCS # S64664, but none of our towing bike racks come with a ball mount that has a 5" drop (none of them actually come with a ball mount as the pictures are for demonstration purposes). If you would like to stick with the XCS that you referenced then I recommend using the Ball Mount Kit # 989900 for 2" trailer hitches. This comes with a 2 different ball mounts, one of which has a 4" drop (which...
    view full answer...

< Previous

Do you have a question about this Accessories and Part?

  • Why

    At we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Colin H
Installed by:
Colin H
Employee Cole B
Installed by:
Cole B
Employee Kristina F
Written by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-636-306-4830