bing tracking image
  1. Hitch Pins and Clips
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Standard Hitch Pin
  5. 1/2 Inch Diameter
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter

Pin and Clip for 1-1/4" Hitches - 1/2" Diameter

Item # PC2
lowest price pledge
Our Price: $6.38
Hitch Pins and Clips
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.28 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This grooved, 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion. 1-833-496-1390 to order Draw-Tite hitch pins and clips part number PC2 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Pin and Clip for 1-1/4" Hitches - 1/2" Diameter. Hitch Pins and Clips reviews from real customers.
  • All Info
  • Reviews (119)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Draw-Tite Hitch Pins and Clips - PC2

  • Fits 1-1/4 Inch Hitch
  • Standard Hitch Pin
  • 1/2 Inch Diameter
  • Draw-Tite

This grooved, 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.


Features:

  • Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver
  • Grooved end enables easy installation and removal of included clip
  • Sturdy steel construction
  • Corrosion-resistant zinc-plated finish


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
  • Pin diameter: 1/2"
  • 1-Year limited warranty



Product Detail


4666 Draw-Tite Class I and II Pin and Clip - 1/2" Diameter - Zinc

63241 Alternate




California residents: click here


Video of Pin and Clip for 1-1/4" Hitches - 1/2" Diameter

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Draw-Tite Class I and II Pin and Clip Review

Today we're going to be taking a look at the Draw-Tite Pin and Clip for Class 1 and 2 trailer hitch receivers, Part Number PC2. This half inch diameter pin and clip is going to fit your inch and a quarter by inch a quarter square receiver tubes. It's 4" long and features a pistol grip style handle, that way you can easily install it and remove it. It also keeps it from sliding all the way through. It's going to work out great for ball mounts, hitch cargo carriers, bike racks, or any other hitch mounted accessories. It's got a zinc plating that's going to help it resist rust and corrosion.

Let's see what it looks like going down the road. That's going to complete our look at the Draw-Tite Pin and Clip for Class 1 and 2 trailer hitches, Part Number PC2.


Customer Reviews

Pin and Clip for 1-1/4" Hitches - 1/2" Diameter - PC2

Average Customer Rating:  4.8 out of 5 stars   (119 Customer Reviews)

This grooved, 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.

by:

We just wanted to tell you how much we appreciated your customer service. We were called Sunday evening, the day after Christmas, and told that the clip my husband had ordered wouldn't work with the other parts.
#1 We were surprised that anyone would be working the day after Christmas on a Sunday evening.
#2 A real person was looking at the order and realized the components ordered wouldn't work together.
#3 The real person called and corrected the ordered parts.
In these days of having to work our way through phone keyboard selections and live chat with computers, it was refreshing to have an actual person catch the problem ahead of sending us an unworkable element, calling us about it, and correcting the problem. We're leaving for FL for the winter on Friday and are planning on taking our bikes. The wrong part would have made our hitch unusable, thus forcing us to leave the bikes at home. With no time to order and receive the correct part, your employee helped to make our winter more enjoyable. Thank you so much.




by:

Order was processed quickly, delivery was very fast. Although corner of box was damaged, no parts were lost due to proper packing of smaller parts. cost was good. Product quality is very good.




by:

Fit my car and easy to install and good instructions included well made would buy again.




by:

A little pricey but good




by:

The hitch adapter and 90 degree mount solved my desire to mount my electric wench on my auto trailer replacing the manual wench. See photo.

The 2" sleeve would not come out of the existing 2" receiver so I used the hitch adapter to make the transition. The etrailer experts correctly told me there would be some play in this joint. However, it works here (as this is not for towing).

I also used the 90 degree mount upside down (also not an approved application). But again no towing is involved. I did need to drill a new hole in the receiver.




by:

Clip interferes with safety chain hooks. Different size clips should be provided.




by:

E-Trailer fits like a glove and is so easy to install. Thanks




by:

Pin and Clip For Class I and II Trailer Hitch Receiver Hitch - PC2 is the quake and safe easiest way to connect your trailer hitch to your vecicle.


Comments
The pin and clip make installing the hitch easy and safe to use.The pin and clip make installing the hitch easy and safe to use.
David L - 09/15/2017



by:

All the parts ordered are of great quality and fit properly. Packaging needs work. The original box was ripped open and had been taped back together by the shipper(UPS). The hitch was still secure but the tow bar was loose and the pin and clip were missing. etrailer sent another pin and clip.
In the future possibly adding some fiber tape would lessen the chance of boxes being mangled.




by:

I have bought two trailer hitches and a cargo carrier. And, have been extremely pleased with all three. They are easy to install and high quality products.




by:

Hitch looks good, Haven't used it yet but am sure it will be fine. However, I ordered 2 different sizes of pins. Was supposed to get 1 small pin (1/2") for the 1-1/4"x 1-1/4" part of the hitch and 1 large (5/8") pin for the 2"x 2" part of the hitch. What I got were 2 large (5/8") pins.




by:

Good quality, but it turns out its too big for the cargo basket and 1 1/4 trailer hitch I had installed.




by:

Just what I needed to use my 2 inch bike rack on my 1&1/4 inch hitch.Very impressed with the heavy duty makeup of the product. I,m sure it will last longer than I will.















by:

I received the order within two days. My son installed the Hitch this past weekend with no problems.
Your service was excellent and your sales person was wonderful. He guided me through what I was looking for and answered all my questions with patience.




by:

It worked great. Leveled out the trailer perfect. Thanks again for your help, good product, and prompt delivery.


Comments
great
Scott S - 08/04/2015



by:

Okay so instillation was quite simple once I got the wires ran. So I had to remove the rear bumper for instillation of the wires. In the video it made it seem that it would be a quick instillation. 4-5 hours I spent intotal to install. It was about 3 hours with removal of the rear cover. It was so much easier taking off the bumper then trying to feed it like they showed.




by:

Looks good so far. It’s a Christmas gift so won’t put it together til then but looks nice. It was recommended as one that will fit our odd size hitch receiver so hope it works.




by:

Everything I needed all the way down to the clips and cost effective. 52 yr. old grandma, and I was able to install it myself. Video on installation was helpful and gave me confidence to attempt the job myself.Instructions were very user friendly. etrailer.com all the way.
Thanks guys!




by:

The price was reasonable, the product was, as advertised and the delivery time was incredible. I ordered it on Monday and had it delivered on Wednesday. The cargo carrier had eleven bolts! It took me no time at all to assemble it. Great service, product and price. I am totally satisfied!




by:

The retaining pin fits a Class I hitch, as promised, although the clip looks delicate.
The clip will be easy to take on and off, but I wish that there were a more secure type so I didn't have to worry about it on the road.




by:

It's a pin! nothing too crazy has been doing the job for a light duty trailer no problem. I did manage to bend the end of the pin on my first one somehow but I think it was due to a drop/getting stepped on etc. Still functions well




by:

Did not need this product but it came with the hitch.




by:

Well made hitch pin.This is the second time I have bought from etrailer.com. both experiences were great.Their service is second to none.




by:

It's a hitch pin...not alot to say about it. It works. eTrailer is a great source for all of your trailering needs. I've ordered before and will again!




by:

It is a great product , only one thing i would change is to make the pin sold with a hole so the clip would go threw the pin in case the chains snag the clip.



25
119
Show More Reviews

See what our Experts say about this Draw-Tite Hitch Pins and Clips



  • Hitch Pin and Clip Recommendations for the MaxxTow Trailer Hitch Receiver Adapter
    Basically you have two options for hitch pin and clips. Either a locking pin and clip or a non-locking pin and clip for both the 1-1/4 inch portion of the MaxxTow MT70355 and the 2 inch portion. For the 1-1/4 inch pin and clips you would want either the Pin and Clip # PC2 or the locking version part # 7682. For the 2 inch portion you would want either the Pin and Clip part # PC3 or the locking version part # 7683.
    view full answer...
  • Hitch Pin Weight Capacity
    I'm not sure I understand why you are holding a tree with a hitch pin, but the Pin and Clip For Class I and II Trailer Hitch Receiver Hitch # PC2 are rated to assist in towing up to 3500 lbs each. If you are using the cotter pin for the weight, they are not rated for weight but only to hold the pin in place.
    view full answer...
  • Hitch Pin
    For the Rhino-Rack 2 - Hitch Bike Rack, we do not carry the replacement hitch pin which is threaded. We also do not carry this threaded hitch pin in a locking style. Most users purchase a cable lock, but you have said you would not like that alternative. What I can do for you today is provide you the customer service line for Rhino-Racks. They will be able to tell you if they have those parts available for sale directly. Rhino-Rack Customer Service www.RhinoRack.com 1-877-744-6622
    view full answer...
  • Class I to Class III Hitch Expander At Least 6 Inches Long on 2012 Ford Fusion Hybrid
    The Hitch Adapter # HTAD is 9-1/2 inches from pin hole to the 2 inch opening. It will fit into Class I or Class II 1-1/4 inch hitch receiver providing you with a 2 inch. It's not able to be used for towing but it will work to carry a bike rack, cargo carrier, or other accessory. You should know that using an adapter like the # HTAD will reduce your tongue weight by 50 percent. The hitch receivers we have available for your 2012 Ford Fusion Hybrid are rated for 200 pounds of tongue weight....
    view full answer...
  • Will The Brophy Hitch Adapter # HTAD Include Hitch Pins
    The Brophy Hitch Adapter, # HTAD, does not include the hitch pins. This adapter will use either a # PC3 pin for 2 inch receivers or # PC2 pin for 1-1/4 inch receivers.
    view full answer...
  • Availability of 1-1/4" to 2" Receiver Adapter
    We do have trailer hitch adapters that allow you to use 2" accessories with a 1-1/4" trailer hitch receiver. Out of our available selection I recommend using the Brophy # HTAD. You will need the pin # PC2 for the 1-1/4" end and pin # PC3 for the 2" end if you don't already have them. Please note that adapters will reduce the weight capacity of your trailer hitch by 50% so if you only have 200 lbs of tongue weight now, once you install the adapter that will be reduced to 100 lbs. If you...
    view full answer...
  • Can 2011 Kia Soul with Draw-Tite Class I Hitch # 24839 Tow a 5 x 8-Foot Trailer
    The Draw-Tite hitch you referenced, part # 24839, is indeed a correct fit for your 2011 Kia Soul. This light-duty Class I hitch has a 1-1/4-inch receiver opening. I have linked an installation video for this hitch on your same model year Soul. For some vehicles hitches are available to enable use of accessory items such as bike racks and cargo baskets, but the availability of a hitch for any given vehicle does not necessarily mean that vehicle is suitable for towing a trailer. According...
    view full answer...
  • Is Drawbar, Hitch Pin, and Clip Needed to Use a Trailer Hitch to Carry Bikes on a 2013 Buick Encore
    The drawbar (also known as a ball mount or stinger) fits into the trailer hitch receiver and gets fitted with a ball. This would be used to tow a trailer. If you never plan on using the 2013 Buick Encore for towing then you will not need a ball mount or ball. Most hitch accessories like bike racks come with a hitch pin or thread hitch bolt so a pin may not be needed either. A regular hitch pin, like # PC2, is held into place with the included clip which is similar to a cotter pin. It...
    view full answer...
  • How Does the Curt Trailer Hitch Cover Install onto a Hitch Opening
    Hitch covers go inside the hitch just like how a ball mount would install that you would use for towing a trailer. You will need a pin and clip like part # PC2.
    view full answer...
  • Hitch Pin Recommendation for Hitch Installed on a 2006 Subaru Impreza
    Sounds like you are looking for a hitch pin. For that you would need the part # PC2. Or it is possible that you need a ball mount. For that you would want the part # 3593.
    view full answer...
  • Does the Draw-Tite Trailer Hitch 24788 for a Nissan Maxima Come with Pin and Clip
    The Draw-Tite Sportframe Trailer Hitch Receiver part # 24788 which is a fit for a 2005 Nissan Maxima I can confirm does not come with a hitch pin and clip. That said, we do sell this separately using the Pin and Clip For Class I and II Trailer Hitch Receiver Hitch part # PC2. The pin and clip is usually included with the accessory but very rarely if ever included with the trailer hitch. I have attached a list of some hitch mounted accessories you may be interested in as well below
    view full answer...
  • Availability of Hitch Pin For 2 Inch Trailer Hitch Receiver
    The two sizes of hitch pins that I carry are 1/2 inch and 5/8 inch. A 2 inch hitch receiver will use the 5/8 inch hitch pin like the Hidden Hitch Pin and Clip, part # PC3. I am including a link to a page of the 5/8 inch hitch pins that I carry. The Class I 1-1/4 inch hitch receivers will use the 1/2 inch hitch pin like the Draw-Tite Pin and Clip, part # PC2. The Softride Replacement Hitch Bolt with Lock Washer, part # SR25879, that you have referenced will only fit the QuietRide stainless...
    view full answer...
  • Hitch Recommendation to Mount 2 Inch Hitch Accessories on 2004 Subaru Forester
    I may have a solution for you to have a 2 inch hitch receiver opening on your 2004 Subaru Forester. The only hitch available for your Forester is a Class II, 1-1/4 inch receiver hitch like the Draw-Tite Trailer Hitch, # 36311. I have attached an installation video for you to check out. Since there are no 2 inch hitches available for your Forester, you would need to use an adapter like part # HTAD to convert your 1-1/4 inch hitch receiver to a 2 inch receiver. The hitch pins and clips...
    view full answer...
  • 2 Inch Adapter Recommendation for Draw-Tite Receiver # 24796
    For your vehicle and the hitch you referenced, I recommend the 1-1/4 inch to 2 inch Brophy Hitch Adapter # HTAD. It will convert any 1-1/4 inch Class I or II receiver to a 2 inch receiver and has enough length for use with the brands you mentioned. A word of caution; using this adapter will cut your gross tongue weight capacity in half and this adapter cannot be used for towing or for using a snow plow. I have provided a video review of this product. I do want to point out that using an...
    view full answer...
  • 1-1/4 Inch to 2 Inch Hitch Adapter For 2002 Honda Accord
    We do not have a trailer hitch with a 2 inch receiver opening that is a confirmed fit for the 2002 Honda Accord. However if you install # 24791 and use Hitch Adapter 1-1/4" to 2" Trailer Hitch # HTAD that will give a 2 inch receiver opening. You will need 5/8" pin for 2" receiver # PC3 and 1/2" pin for 1-1/4" receiver # PC2 Please note that tongue weight capacity of hitch will be reduced by 50% with use of adapter.
    view full answer...
  • Adapter Needed to Use Cargo Carrier for 2 Inch Hitch on 2014 Ford Focus w/ 1-1/4 Inch Class I Hitch
    Yes, you can use a hitch adapter like the 1-1/4 Inch to 2 Inch, # HTAD, in the Draw-Tite Sportframe Trailer Hitch Receiver, # 24872, to allow you to use the cargo carrier/basket for the 2 inch hitch. In addition to the adapter you will need hitch pin and clip # PC2 and # PC3. You will just need to keep in mind that using an adapter like # HTAD reduces the capacity of a hitch by 50 percent so in this case you would have a reduced carrying capacity of 100 lbs. This carrying capacity will...
    view full answer...
  • Recommended Hitch Adapter to Expand Trailer Hitch Receiver on 2015 Dodge Dart
    We do offer various hitch adapters that can turn the 1-1/4 inch receiver on your 2015 Dodge Dart into a 2 inch opening. For example, the Brophy # HTAD will insert into the receiver opening and provide the larger 2 inch opening needed for a lot of hitch-mounted accessories. An important factor to keep in mind is that that the use of any hitch adapter will reduce its tongue weight capacity by 50%. For example, if your the trailer hitch on your Dodge Dart has a 200 pound weight capacity, this...
    view full answer...
  • Hitch Pin for Use on ATV
    ATVs do not have a universal hitch pin size they will require, the size of the hitch pin is actually determined by the trailer hitch that fits. If you are using something like the Curt ATV Ball Mount Adapter # C45006, for example, you would need the Pin and Clip For Class III, IV and V Trailer Hitch # PC3. For the most part, if you have a 1-1/4 inch receiver you will used the Pin and Clip For Class I and II Trailer Hitch # PC2 which has a 1/2 inch diameter and if the receiver is 2 inches...
    view full answer...
  • What Size Hitch Pins Does the MaxxTow Trailer Hitch Receiver Adapter MT70032 Use
    The MaxxTow Trailer Hitch Receiver Adapter part # MT70032 uses two different size hitch pins, part # PC2 which is 1/2" and part # PC3 which is 5/8". The 1/2" pin is used on the part that goes into the trailer hitch and the 5/8" pin is used on the part that the accessory gets installed in.
    view full answer...
  • Does the MaxxTow Trailer Hitch Receiver Adapter Come with Hitch Pins
    The MaxxTow Trailer Hitch Receiver Adapter part # MT70033 does not come with hitch pins but we do have the ones you need, part # PC3 for the larger 2" side and part # PC2 for the smaller 1-1/4" smaller side.
    view full answer...
  • Type of Threaded Hitch Pin Used to Secure Thule Transporter Hitch Cargo Carrier # TH665C
    The Thule Transporter Hitch Cargo Carrier # TH665C that you have acquired is designed to fit both 1-1/4-inch Class II and 2-inch Class III trailer hitch receivers. It adapts to the larger hitch size by installation of the included square sleeve that slides over the 1-1/4-inch shank. (This sleeve is shown in the linked instructions.) This carrier also comes with a threaded hitch pin that is designed to help secure the carrier's shank in the receiver tube to minimize rattle and wobble while...
    view full answer...
  • P315 Conversion Bar for Swagman XP Bike Racks
    Part # P315 probably would not work with your hitch. My information shows that the only available hitches for your 2008 Kia Optima are Class I hitches and P139 is for Class II only. We do have another adapter that will work for a Class I hitch. It is part # HTAD and it will allow your Class I 1-1/4 hitch to accept 2 inch accessories. You will need part # PC2 to hold the adapter into your hitch, and if you do not already have one, part # PC3 to hold your bike rack to the adapter. Please...
    view full answer...
  • Recommended Reducer to Fit 1 1/4 Bike Rack Into A 2 Hitch Receiver
    The solution would be go get a hitch reducer, these reducers will fit into a 2 inch hitch receiver one end, and also fit your bike rack that is 1-1/4" on the other end, as there are no 1-1/4 inch hitch receivers for that vehicle. The Hitch Reducer # HT02 Measures 3" from center of pin hole to center of pin hole. There is also an adapter that measures 7" from pin hole to pin hole # 80300. The 5/8" Hitch pin and clip for 2" receiver # PC3 or 1/2" pin for 1-1/4" receiver # PC2 are valuable...
    view full answer...
  • Hitch Adapter From 1-1/4 Inch to 2 Inch For Use With Cargo Carrier On 2014 Ford Mustang
    We have the adapter you are looking for. It is the Brophy Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver, # HTAD. This adapter measures 7-1/4 inches from pin hole to pin hole. It has a 300 lb tongue weight limit, which needs to be considered in regards to your vehicle weight capacity, your hitch weight capacity, and the cargo carrier weight capacity. The lesser number of all of these is your max tongue weight rating. I looked in your owners manual to try and assist and it varies...
    view full answer...


< Previous
123. . .15



Do you have a question about this Hitch Pins and Clip?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality hitch pins and clips for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch pins and clip information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Hayden R
Installed by:
Hayden R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.