Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
(110 reviews)
Price: $10.01
In Stock
Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
Item # PK11501
Retail:$19.31
Our Price: $10.01
You Save: 48%
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (110)
- Q & A (0)
- Photos
- Why etrailer?
Pollak Trailer Wiring - PK11501
- Trailer Connectors
- Trailer End Connector
- 5 Round
- Plug Only
- Pollak
Establish a secure connection between your trailer and tow vehicle with this chrome-plated, 5-pole plug. Split brass pins ensure minimum voltage drop, and pull grips enable easy insertion and removal.
Features:
- Standard, 5-pole plug connects trailer to socket on tow vehicle
- Round, split brass contacts
- Minimum voltage drop and maximum current capacity are ensured
- Dielectric (non-conducting) grease coating
- Prevents corrosion and resistance
- Solid brass terminal screws
- Chrome-plated, die-cast zinc housing for durability
- Finger grips make insertion and removal easy
- ABS thermoplastic interior
- High-impact, green insulators
Specs:
- Volt rating: 12 volts - 24 volts
- Current rating: 15 amps
- Wiring configuration:
- Color - circuit:
- White - Ground Return
- Green - Right Turn and Brake Lights
- Yellow - Left Turn and Brake Lights
- Red - Auxiliary Circuit
- Brown - Tail Lights
- Color - circuit:
- 1-Year limited warranty
11-501P Pollak 5-Way, Round Pin Trailer Wiring Connector - Chrome - Trailer End
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End - PK11501
Average Customer Rating: 4.6 out of 5 stars (110 Customer Reviews)
Establish a secure connection between your trailer and tow vehicle with this chrome-plated, 5-pole plug. Split brass pins ensure minimum voltage drop, and pull grips enable easy insertion and removal.by: Sid C.05/15/2020
A similar trailer light connector was installed on my motorcycle cargo trailer when I purchased it way back in 2003. When I purchased my new Gold Wing in 2019, I wanted to use the same type of connector. Since I had to add a new female connector to the bike, I decided to renew the male connector on the trailer. I especially like this connector because it always stays secure when connected. I also wanted the connections to be out of sight when not in use. I have pulled my trailer with this new connection for over 2,500 miles and it has performed great.
Comments
Still working great even after a year!
Sid C - 05/16/2021by: Johnny 09/02/2022
Was hoping it was USA made, but that was silly of me:))
Have NOT ever been very fond of the ‘side mount’ style for the wires, but not able to find the ‘rear mount’ anywhere. Same goes to both male and female parts.
Was finally successful:)) My motorcycle pull behind trailer does NOT use the standard color-coded system….so simply had to test each circuit. No worries
by: Gary 09/20/2022
Very good quality good price very fast service
I used it for my motorcycle camper
by: John06/18/2019
Mounted Pollak sockets to left saddle bag of 2018 Can Am Spyder RT for removal of "pigtail" extension to CSC trailer when not in use. This will eliminate any possible damage to hook up wiring and gives much "cleaner" look to hitch installation. I looked everywhere for these sockets, online & three auto parts for what I wanted and only etrailer.com had them and also the lowest price. Could not ask for more, arrived in 3 days, customer service follow up and answered my email technical question within 24 hours. Bookmark them and use on all your trailer needs. I have 4 trailers and do my own work.
by: Dan 09/05/2022
Exactly what I needed to make the trailer connection work.
by: Eddie R07/25/2016
Unit works great on my trailer and bike. Went on a trip a couple of weeks ago and had no electrical problems with the connections. They hook up solid and stay there,
by: J.T.09/23/2016
I used the male 5 pin on a pull behind motorcycle trailer and the female connecter on a 2008 Harley Davidson. These 2 purchases were perfect for my applications.
Thank you.
by: Richard 07/19/2022
Have put about 20000 miles on the road with it and it has performed perfectly. Good item
by: Jerry C. 08/15/2017
Since I'm using this on a motorcycle I was looking for something that was fairly compact. This connector fit my needs but because it was pretty small it made installing the wires into the side of the pins a bit trying at times. I finally got around this by removing the crimping screws, running the wires straight in and soldering them in place. This worked very well and I feel a bit better about the connection.
However that being said, there's nothing wrong with the screw terminals at all. It's all just a bit small for big hands.
Comments
After pulling the trailer behind the motorcycle for several thousand miles I have no complaints. The fit and finish remains like new. Ive had issues with my connection. If I have need for a matching plug or connector Id reorder these in a heartbeat.
Jerry C - 08/16/2018by: Marquis R.02/20/2014
This very hard to find item is of excellent quality and offers a very snug fit to it's male mate. etrailer had both the male and female items in stock, thereby providing super fast shipment at a very decent price. Prior to etrailer, no other parts provider even provided pictures of this item in their catalog. This item will be used to connect the electrical system of my Bushtec trailer to the mating connector mounted on my 2010 Honda Goldwing. Thank you etrailer!!
Comments
Much better than expected as the finish on the connector is completely free of rust, discoloration, or other imperfections associated with open road use items.. Of course the connector is mounted is a area that is subjected to water, rocks, dust and dirt, however I have not had any problems visually or electrically since installation. Mating of the connectors are still snug with perfectly clean electrical contacts.
Marquis R - 02/24/2015by: Philip01/19/2020
I purchased this to use on a motorcycle and it is the perfect size. I purchased both pieces and the fit is exactly what i was looking for.
by: Chris08/18/2016
Not much to write about, very simple and basic piece.
But, that's not the story here. etrailer.com is the real story, great site, very well laid out, for people like me. I took some time and looked at everything that I could see on this site. Lots of products sold at prices that just cant be beat. Super fast shipping. I think I got an email the next day my order had shipped. I will be back and will let all my people know all about etailer
Thanks Chris in OR.
Comments
Everything works couldnt be more pleased
Chris - 08/18/2017by: David10/01/2018
The dog chewed my trailer harness. No one in my area carried a five pin except for the HD DEALERS ($$$). Part arrive within the week, priced right and easy install.
Comments
No issues. Actually forgot about it till i got a question about how it was working
David - 10/02/2019by: Mark 07/03/2022
great workman ship
by: Charles04/28/2016
I've had the receptacle and plug version of this installed between a homemade truckbed trailer and my older toyota truck for several years and it works great, good connection, and easy to install. I went with the 5 conductors as all I needed were left/right signals, brake and running lights. I drive offroad a lot with the trailer without problems. I just received my second order, for an additional trailer, and the plug is really tight, thanks to the conductors being slightly too spread. I'll have to pinch the pins a bit to loosen the fit - easy enough. Otherwise it'd be 5 stars
by: David09/22/2019
I like the look, and really easy to install, just make sure you do not strip much off the wire so you can put it through the hole under the screw, so as to not have any extra wire sticking out because they are really close.
by: Robert11/20/2017
With the help of Crystal I ordered this connector and a matching wiring harness for my motorcycle and trailer. I was unsure if these were the correct parts, but Crystal was able to locate the exact ones and ship them the same day.
I was very pleased with the fast service and knowledgeable staff. Even with standard shipping, my order arrived 4 days sooner than was projected.
To say I'm happy with etrailer is an understatement. They are great.
by: John02/24/2021
Works great and looks so much better than those black plastic ones.
by: Gary07/27/2019
Wanted to use this plug as the bike and trailer both had them. This was to replace damaged trailer plug. One tube inside the plug was stripped the first time I tried it. The "mechanics" of the plug dictate that only a short bit of wire goes into the tube, to be held in place by a tiny screw. And one was stripped to begin with. I ended up lopping the plug off and going with the 5 pin flat plug. I wouldn't bother trying this plug if a flat connector would work in your application.
by: Richard 08/21/2021
Perfect. This is exactly what I need to connect my trailer to my Goldwing. It is almost impossible to find this plug elsewhere.
by: Perfect04/14/2019
I couldn't find this specific size and fit anywhere else. I have now traveled all over the Country with this trailer and motorcycle combination, in all kinds of weather and climates. No corrosion, no loose connections, has always been secure and dependable. Thank you.
by: Michael10/28/2018
located hard to find 5-pin trailer connector. bought 2/1 for spare. nice company to work with...
Comments
Working great, converted 4-pin flat to 5-oin round as I wanted to add a power wire to trailer. This did the job!
Michael - 10/29/2019by: W Russell 08/28/2016
I was unable to find a five pins connector locally and George at trailer made it happen. My small order was handled quickly and professionally. The job of wiring my buggy to my van was simplified tremendously. Thanks etrailer!
by: Chuck D03/20/2014
I received my trailer plugs in a timely manner. I was also impressed with the clerk's knowledge of the products and going the extra mile even though it was a small order. Definitely will buy again from etrailer
by: Gary05/07/2022
Every nice and build well.
25
109
Show More Reviews
See what our Experts say about this Pollak Trailer Wiring
- Could the Pollak 5-Way PK11501 be Used On a Motorcycle TrailerIf you have a 5-way round connector on your trailer that you tow with your motorcycle that you need to replace the part # PK11501 would work. I attached a review video for this connector for you to check out as well.
view full answer... - Outside Diameter of 5-Pole Trailer Connector, Part # PK-11501The outside diameter of the Pollak 5-pole Round Trailer Connector, part # PK11501 measures .80 inches.
view full answer... - Will Pollak 5-Pole # PK11501 Accept 10 Gauge WireYes, the Pollak 5-Pole, Round Pin Trailer Wiring Connector # PK11501 will accept 10 gauge wire.
view full answer... - Pin Functions of Pollak 5-Pole Round Pin Trailer Wiring ConnectorAlthough there are no wiring diagrams available for the # PK11501, when looking at the front of the harness the 12 o'clock pin is the tail lights (brown wire) the 2 o'clock pin is the aux circuit (red), the 5 o'clock pin is the right turn/brakes (green) , the 7 o'clock pin is the left turn/brakes (yellow) and the 10 o'clock pin is the ground (white wire). I have added a link to a video review for you to check out as well.
view full answer... - How to Insert Wires Into a Trailer ConnectorOnce you remove about 1/4" of the jacket from the wire you will want to twist the strains together to form a stronger bond and then insert that into the Pollak 5-Pole Round Pin Trailer Wiring Connector part # PK11501 and tighten down the screw. This will not only prevent then strains for being cut but will also help prevent jumping circuits.
view full answer... - 5-Way Trailer Plug to Wire to 1995 Chevy C1500For a 5-way round connector you could wire to the wiring you have under your truck you'd want the part # PK11501 and you'd be set.
view full answer... - Outside Diameter of Pollak 5-Pole, Round Pin Trailer Wiring ConnectorThe outside diameter of the Pollak 5-pole Round Trailer Connector, part # PK11501 measures .80 inches. That is just a little under 13/16 of an inch. This is the trailer side connector. The matching vehicle side connector is # PK11502. The part of it that would fit into the hole is 0.974 inches.
view full answer... - 5-Way Round Pin Trailer and Vehicle Side ConnectorsThe mating 5-Way vehicle end for # PK11501 is # PK11502.
view full answer... - How Do You Take Apart Pollak 5-Way Round Trailer Connectors to Attach WiresTo take apart the Pollak 5-Pole vehicle side connector # PK11502 or its matching trailer side connector, # PK11501, you would remove the set screw and then the pin portion will either fall out or you will need to push it out from the back of the connector using a screwdriver.
view full answer... - When Wiring a Motorcycle 5 Pin Round Trailer Plug What is the Standard Wiring DiagramThe Pollak 5-Pole, Round Pin Trailer Wiring Sockets, item # PK11502, and # PK11501, do not have a standardized wiring configuration. I normally direct my customers to the 6-way wiring configuration, eliminating the middle pin. Start by wiring the top most connector inside the vehicle end # PK11502, as with the taillight circuit (12 o-clock). Then looking inside the connector, where the wires are attached, going clockwise the next terminal (1 o-clock) position can be wired as brake output,...
view full answer... - 5-Way Round Vehicle and Trailer Side Connectors for Use with a MotorcycleMotorcycles have unique trailer connectors that are a little different than what is on other vehicles. You could wire in connector # PK11502 and it will likely be a match to what is on your trailer. Or you could also get the matching trailer side connector, # PK11501, so that the bike side and trailer side are for sure compatible. I have linked videos for both parts for you.
view full answer... - 5-Way Round Vehicle Connector To Tow Trailer WIth 5-Way RoundI do have an option for you but it is not a wiring harness for the truck. I recommend to wire in the Pollak 5-Pole, Round Pin Trailer Wiring Socket, Concealed Terminals part # PK11502 at the rear of the truck which will give you a plug to plug in the 5-way round on your trailer. This is recommend to be used with 15-16 gauge wire and I attached the wiring configuration below: White - Ground Return Green - Right Turn and Brake Lights Yellow - Left Turn and Brake Lights Red - Auxiliary Circuit Brown...
view full answer... - How To Determine Fit of Pollak 5-Pole, Round Pin Trailer Wiring Socket, Concealed TerminalsThe Pollak 5-Pole, Round Pin Trailer Wiring Socket, Concealed Terminals part # PK11502 uses a standard five pin layout. I don't have the diameter of the pins but it will work with pretty much any five round trailer connector like the Pollak 5-Pole, Round Pin Trailer Wiring Connector part # PK11501. This setup is commonly used on motorcycles and motorcycle trailers. If I had to guess, I would say 1/8" should be fairly accurate. If you are trying to instead determine wire gauge size, the...
view full answer... - 5 pole Round 5 Pin Vehicle and Trailer Connectors.I can recommend both trailer and vehicle connectors for you. The trailer connector is item # PK11501 this is a Pollak 5-Pole, chrome connector. The vehicle connector is item # PK11502 this is also Pollak 5-Pole. It has a chrome-plated socket has concealed terminals to provide easy assembly and durability. I have linked videos for both.
view full answer... - What is the Diameter of a 5-Pole Trailer ConnectorThe outer diameter of the Pollak 5-Pole, Round Pin Trailer Wiring Connector # PK11501 is right about 3/4" which you can see in the attached photo. This is the standard size for a 5-pole connector so odds are what you have will work just fine. If you're needing the socket end of this as well then part # PK11502 is the matching chrome piece. Attached are review videos for you to check out.
view full answer...
- Adding a 4-Way Flat Trailer Connector to a Harley with 5-Way Round Trailer ConnectorThe 5-Way on your Harley might actually have separate circuits each for brake lights, left turn signal, and right turn signal. A 4-Way will have the brake lights and turn signals on the same circuits. To tow a trailer that has combined wiring with a motorcycle that has separate wiring I recommend converting the Harley connector to match the other bike and the trailer. All you will need is a converter, # 119178. On the input side you will connect the wires from the bike's 5-Way. The red...
view full answer... - Adapting 5-Way Round to 4-Way Flat for a MotorcycleThe 5-Way on your Harley might actually have separate circuits each for brake lights, left turn signal, and right turn signal. A 4-Way will have the brake lights and turn signals on the same circuits. To tow a trailer that has combined wiring with a motorcycle that has separate wiring I recommend converting the Harley connector to match the other bike and the trailer. All you will need is a converter, # 119178. On the input side you will connect the wires from the bike's 5-Way. The red...
view full answer... - Parts Needed to Make a 6-Way Square to 5-Way Round AdapterWhat you would need to make the adapter you are looking for is the part # 37995 for the 6 pole square side and the part # PK11502 or part # PK11501 depending on which style 5-way you need.
view full answer... - Parts Needed to Connect a 5-Pole, Round Connector to a 4-Way Flat ConnectionYou could put together an adapter using part # PK11501 and part # 18172 for the 5 pin round/4-Way Flat connection that you need. For the 2 female - 5 pin round connectors, you'll need part # PK11502 This 5-pole socket will connect your trailer to tow vehicle. The female/male terminology can be a bit confusing because of the pins in this connector. Part # PK11502 is actually an industry standard female connector because part # PK11501 plugs into it. I have also attached a link with...
view full answer... - What is the Amperage Rating for Pollak 5-Pole, Round Pin Trailer Wiring Connector # PK11501In terms of handling up to a 30 amp power draw the Pollak 5-Pole, Round Pin Trailer Wiring Connector # PK11501 can handle 15 amps. Thirty amps would be too much for it. That is why I would go with a 6-Way, # PK11604. As far as environmental conditions considering that I assume this will be on some sort of watercraft the outer shell is chrome plated and die-cast zinc so it does have decent protection against corrosion. After running wires to the plug and closing it up make sure to wrap...
view full answer... - Adding a Converter and 4-Way Flat Trailer Connector, # 119176KIT to a Motorcycle to Tow a TrailerWhile we do not carry a 5-Way round to 4-Way flat trailer connector adapter, but you do have an option. Because motorcycles use a 5 wire system, you will need to use a converter, # 119147KIT, in order for the trailer to be compatible with the motorcycle wiring. I have included a link to the installation details for this wiring harness for reference. You will need to follow the steps for a 3 wire system. With this wiring harness installed it will be compatible with the 4-Way flat trailer...
view full answer... - Hard Wire Configuration for 5 Pole Round Pin Trailer ConnectorThe wiring configuration for the Pollack 5-Pole Round Pin Trailer Wiring Connector # PK11501 is as follows: Color - circuit: (position when looking at front of harness) White - Ground Return- 10 o'clock pin Green - Right Turn and Brake Lights-5 o'clock pin Yellow - Left Turn and Brake Lights- 7 o'clock pin Red - Auxiliary Circuit- 2 o'clock pin Brown - Tail Lights- 12 o'clock pin You'll want to test the wires on your vehicle end connector using a circuit tester like # PTW2992 to...
view full answer... - Adapter for 5-Pin Round Trailer Connection to 4-Way Trailer ConnectionWe do not carry that adapter, but we do carry the parts you need to make one. You can use the Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End # PK11501 along with the Hopkins Endurance 4-Way Flat Trailer Connector Socket - Vehicle End # HM48030.
view full answer... - 5 Pin Round to 4 Pole Flat Trailer Connector Adapter for Motorcycle Pulling a TrailerAlthough we don't offer an adapter, you could construct one very easily. What does the 5th circuit from the 5 pin round connector on the bike power? I'm assuming that the circuits are ground, right turn, left turn, running lamps and brake lamps. Since the trailer you're wanting to tow has a 4 way flat trailer connector, presumably with a combined brake/turn signal taillight system, you'll need a taillight converter such as part # 119130. You'd wire the inputs from the converter to a 5...
view full answer...
Do you have a question about this Trailer Wiring?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer wiring information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Tyler C
Video by:
Kathleen M
Installed by:
Cole B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.