bing tracking image
  1. Accessories and Parts
  2. Pollak
  3. Trailer Wiring
  4. Mounting Hardware
  5. Brackets
  6. 7 Round
Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End

Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End

Item # PK12711U
Retail:$16.63
Our Price: $10.52
You Save: 37%
Accessories and Parts

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 0.32 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This universal, right-angle bracket is designed for mounting the Pollak 7- and 9-pole trailer connectors to your towing vehicle. Black, zinc-plated bracket mounts under rear bumper of truck or SUV. Mounting hardware included. 1-800-940-8924 to order Pollak accessories and parts part number PK12711U or order online at etrailer.com. Free expert support on all Pollak products. Great prices and Fastest Shipping for Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (994)
  • Q & A (0)
  • Photos

Pollak Accessories and Parts - PK12711U

  • Trailer Wiring
  • Mounting Hardware
  • Brackets
  • 7 Round
  • Pollak

This universal, right-angle bracket is designed for mounting the Pollak 7- and 9-pole trailer connectors to your towing vehicle. Black, zinc-plated bracket mounts under rear bumper of truck or SUV. Mounting hardware included.


Features:

  • Right-angle mounting bracket
    • Convenient mount under rear bumper of truck or SUV
  • Zinc-plated construction
  • Black, epoxy coating protects against rust and corrosion
  • For a no-drill installation, additional mounting brackets can be used that clamp to the trailer hitch and bolt to this bracket
  • Includes hardware to mount bracket to vehicle and wiring harness to bracket


Specs:

  • Application: PK11893, PK12703, PK12707 or PK12907
  • Overall dimensions: 3" wide x 3-13/16" tall x 1-3/8" deep
  • Diameter of mounting hole: 2-3/16"
  • 1-Year limited warranty


Dimensional Diagam



12-711U Mounting Bracket for Pollak 7-Way, RV-Style Trailer Connector - Vehicle End and Installation Hardware

Replaces 10-111V and 12-711UP





Customer Satisfaction Score:


Customer Reviews

Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End - PK12711U

Average Customer Rating:  4.7 out of 5 stars   (994 Customer Reviews)

This universal, right-angle bracket is designed for mounting the Pollak 7- and 9-pole trailer connectors to your towing vehicle. Black, zinc-plated bracket mounts under rear bumper of truck or SUV. Mounting hardware included.

by:

Great product with easy installation

Robert

3/13/2024

Very please and no issues



by:

This worked ok for me on my trailer light install, but after a year the black screws that came with the kit are rusting badly. I didn't use the silver screws that came with the kit, needed longer ones, so can't say how they would hold-up......

Johninky

8/3/2023

RUST on screws is still an issue on screws. I painted them a few times with black spray Rust-Oleum....



by:

Works as it should. when it was shipped I was put in the box with the hitch receiver and got crushed. the small screws were missing probable from the box getting destroyed. I made it work but was disappointed



by:

Great product and great price! No issues since installing on my 2022 Buick Enclave!



by:

Made a good location and solid mount for the wiring for my trailer harness.



by:

Turned out my factory bracket did fit the wiring harness and the bracket worked out great, it fit perfectly where it was installed.



by:

The tow package I purchased last year, fits great and installed perfectly. It works perfectly with my electronic under-dash brake controller.

The kit came with everything that I needed and instructions were easy to read I had the entire kit installed in about 40 minutes it's work Flawless for me for over a year and I tow a variety of trailers the plug is never failed due to workmanship it is still water tight.

The receiver cap spring still has excellent tension to help hold the plug into place, the only gripe I have is that I should have installed stainless mounting screwswhen I installed the kit because the mounting starting are starting to rust a little, but that's my oversight and is nothing to do with the kit and its ability to provide flawless service.

I highly recommend this product if you're like me and was looking for an oem Plug and Play setup!

5 stars!



by:

Works great if you pay attention and mount it properly the first time, lol. No issues with the product at all.



by:

My F150 had an OEM 4 pin trailer plug and hitch.
The 118242 - 7 pin connector with wiring harness is the ticket. The hardest part of the install was dropping the spare tire. The plugs connect directly to the factory plugs and the harness length is the correct length.
The 3035-P brake controller connector harness was just as easy. Plugs right in to the OEM plug next to the ECM connector and the other end into the brake controller.
The PK12711U-26 - 7 pin bracket and hardware kit fastens directly the OEM bracket that is on the hitch. My truck had an OEM 4 pin trailer towing set up with the hitch. The OEM hitch had the bracket welded on it to attach the 7 pin mounting bracket to it.
These kits make this install very easy and professional looking.
If I have one complaint, the hardware kit to attach the 7 pin connector bracket is set up to fasten the bracket directly to the bumper with 2 - self tapping screws provided in the kit. The kit also includes 4 #12 machine screws with toothed washer nuts to attached the 7 pin connector to the bracket. This is fine if your truck hitch doesn't have an attaching bracket welded to it. The kit should included in it 6 #12 machine screws and nuts along with the 2 self tapping screws. Since my OEM hitch actually had a bracket welded to it to attach the 7 pin bracket to it, I had to use two other #12 screws and nuts to attach the 7 pin bracket to the OEM bracket on the hitch. Not a big deal, just a thought.
It took me about 2 hours, start to finish to install the 7 pin connector, trailer controller, and add the two relays in the OEM relay/fuse box under the hood.
I highly recommend these kits.



by:

It was suggested I purchase this bracket to assist in mounting my 7-way trailer harness (item #118253) to my 2010 Honda pilot. When I tried to attach the bracket underneath and behind the bumper, I discovered it was too tall and very difficult to fit where it was required. I also found that the bracket is a 90-degree bend and will not go flush against the bumper wall. The bumper wall runs at an angle and you would need a bracket with an approx 35-degree angle to fit flush against the bumper, that's important if you want a professional clean looking mounting of the trailer harness (7- way insert) like I installed (see attached pics). So forget this bracket, Just save your money and mount onto the bumper wall, plenty thickness and you get a clean look...Maybe one day they will make the proper bracket for such an installation...



by:

None of the hardware displayed in the picture was included with the bracket. I found the needed hardware in my shop.

Etrailer Expert

Jenny N.

9/18/2023

The hardware is definitely included. I will have our Customer Service reach out to you.



by:

Easy to install, I didn't use the two self-tapping screws, the tow hitch already had a plate on it to attach the mounting bracket. It would have been nice if they would have included two small bolts with washers and nuts to attach.



by:

Bought for a 2018 Nissan Frontier. Fit the wire plug perfectly and the Screws and nuts to secure the plug to the bracket were fine. The two screws to attach the bracket to the vehicle were way too small to use. They wouldn't work on the mounting tab on the Draw-Tite hitch or the factory holes under the bumper. I suppose if your creating new holes they would be okay. Appears to be a quality piece and I'm very satisfied with it.



by:

The product delivered was exactly as advertised, Delivery was super fast and was easy to install, Thanks!



by:

The mounting bracket for my trailer connector was easy to attach and worked very well with my trailer connector.

David

4/12/2023

Still working great.



by:

Very good fit and holding up well.



by:

Although this bracket comes with tapping screws to mount to a metal undersurface structure, it only has 4 screws for the 7 point hitch device to screw into it and no additional screws to mount to the hitch itself. It should come with 6 locking screws for that purpose. I had to use 2 to mount it to the hitch and 2 to mount the 7 point hitch device into the bracket, leaving 2 spots open. I went to my local hardware store and autozone and couldn’t find these exact screws and etrailer doesn’t sell them as a separate order.



by:

Had to make a few adjustments but worked on my 2021 Hyundai Palisade



by:

Product went together as described and when attached to the short no drill mount bracket provided a sturdy mount for the 7way plug.



by:

Easily installed on my 2021 Chevy Blazer RS. Has held up will with one year of use.



by:

Great product and easy installation!



by:

Just the right part for the job! Perfect fit for my 7-way harness and on my draw-tite hitch!



by:

This was a replacement for a bracket that I was told would fit the 7-pin Connector I purchased but it didn't. I would have given it 5 stars, but it shipped with only 4 mounting screws when 6 are required for a bracket-ready trailer hitch (two for mounting to the tab on the hitch). Not sure what the two sheet metal screws were to be used for?? The saving grace is etrailers did not require the return of the non-fitting bracket (which did ship with 6 machine screws and nuts) so I could "steal" 2 screws from that bracket.



by:

Installed pretty easily.



by:

Works perfectly


25
994
Show More Reviews

See what our Experts say about this Pollak Accessories and Parts



< Previous
123. . .15



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Sue W
Video Edited:
Sue W
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Tyler C
Written by:
Tyler C
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Nicholas E
Test Fit:
Nicholas E
Employee Robert C
Test Fit:
Robert C
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Carrie F
Updated by:
Carrie F
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.