bing tracking image
  1. Accessories and Parts
  2. Pollak
  3. Wiring
  4. Switches
  5. Toggle Switch
  6. 10 Amp
Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads

Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads

Item # PK34513
lowest price pledge
Our Price: $7.47
You Save: 43%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.07 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed


Need help with installation?
Locate installers near me
This light-duty toggle switch combines space-saving size and economy. May be used in automotive, light-truck, off-road, and RV applications. Includes mounting hardware and 6" wire leads. 1-833-496-1390 to order Pollak accessories and parts part number PK34513 or order online at Free expert support on all Pollak products. Guaranteed Lowest Price and Fastest Shipping for Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (4)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Pollak Accessories and Parts - PK34513

  • Wiring
  • Switches
  • Toggle Switch
  • Pollak
  • 10 Amp

This light-duty toggle switch combines space-saving size and economy. May be used in automotive, light-truck, off-road, and RV applications. Includes mounting hardware and 6" wire leads.


  • Combines space-saving size and economy
  • Includes mounting hardware and 6" wire leads


  • Applications: automotive, light-truck, off-road, and RV
  • Capacity: 10 amps at 12 volts
  • Toggle positions: on-off
  • Quantity: 1
  • 1-Year limited warranty

34-513P Pollak Light Duty Toggle Switch - On Off - 12 Volts - 10 Amperes - 6 Inch Wire Leads

Video of Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Pollak Light-Duty On-Off Toggle Switch Installation

Hey guys, Kevin here with etrailer, and today, I'm gonna be showing you how to install the Pollak Light Duty Toggle Switch. So this Pollak Light Duty light switch is just a simple on off, and it comes with two six-inch wire leads. So it's honestly a super easy install. The hardest part of your installation is really just gonna be running your wires over to your switch. So, because I'm installing a relay, I yanked out the original switch that we had right here, and I cut into our power, cause I'm gonna make a little jumper over to our new switch. And then I ran our other power wire coming from our relay right over through our ceiling, down into our railing here.

And then we're going to make our connections. Doesn't matter which wire that you've used when you're doing this. So I'm just gonna hook up my left side here to my wire, ran it over to our relay. That In. We can crimp it down.

And then on my other side, I've already stripped a wire back on each side and I'm gonna make a little jumper from our power wire to our other switch. And then place that onto my other wire right over here. So I'll twist these together. We'll put on our butt connector. Crimp it down.

Now we can crimp on our other side of our power wire so that we have a connection back to our first switch. And then we'll use another bud connector between our new switch and our jumper wire. Now we can go ahead and place our wiring back up into our wall here and then put on our plates so that we have a nice cover. You don't see these ugly holes in the way. Pull off our on-off.

Take a cover, slide that right through. I'm actually gonna have to take this one off as well, just for this switch. Drop that on, drop on our on-off. And this is only gonna go one way, cause there's a little tooth right there, that's gonna go right into this gap. So you don't have to worry about putting it on the wrong way. And then we can twist on. If we can. Back in place. And now I'm just gonna take some self tappers and shoot 'em right through to hold our cover in place. Now that we have our cover back in place, we can go ahead flip on our switch. And then test that it's working with our lights. As you can see, our switch is activated at our lights. Well, guys I think that about does it for our installation today of the Pollak Light Duty Toggle Switch here on our enclosed Feather Light Trailer. My name's Kevin. Thanks for watching..

Customer Reviews

Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads - PK34513

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

This light-duty toggle switch combines space-saving size and economy. May be used in automotive, light-truck, off-road, and RV applications. Includes mounting hardware and 6" wire leads.


Good switch .. heavy enough to complete most applications .. wires long enough to complete wiring easily .. switch body small to fit in close spaces, has excellent wire connection protection .. useful when installing in areas with little rear access


Fits on my old-school 1989 toyota dolphin just fine! Got to add some silicone caulking around it so it doesn't fly off this time!


quick shipping ,quality parts



See what our Experts say about this Pollak Accessories and Parts

  • Recommended Switch for Wiring New LED Light Strips Inside Cargo Trailer
    We do have a nice selection of switches that may work well to control the new LED light strips inside your cargo trailer. You will just need to make sure you choose a switch that is rated properly for the draw of your lights. Since LED lights aren't going to draw much power at all, going with a 10 amp switch like the Pollak Light-Duty Toggle Switch # PK34513 should be enough, but you will want to check to make sure. This is a really nice toggle switch that includes mounting hardware and...
    view full answer...
  • 12V Toggle Switch For A Light
    Yes, we have the Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads # PK34513 that would be perfect for controlling your 12v light.
    view full answer...
  • Installing Third Brake Light and Dome Light into Truck Bed Cap
    If you will take a look at the wiring harness up above the spare tire, you should find the connector that the 7-way plugs into. If you trace the loom back just a bit, you will find a light blue wire that is used for the 3rd brake light for your truck cap. If you will follow the provided link, see Step 3 figure B. This photo will show you the location of this wiring harness above the spare tire. For the interior dome light, there are two common methods both of which will require a switch,...
    view full answer...
  • Powering Interior Trailer Lights Using a Battery Instead of Trailer Connector
    The breakaway battery should only be used to power the trailer brakes in a breakaway event so I strongly recommend using a separate 12 volt battery to power the interior lights in your trailer. Since the lights currently run off of the 12 volt circuit you can trace the 12 volt wire from the trailer connector to where it enters the trailer. That is likely the wiring for the lights. If you were to wire a battery to that wire and put a switch in line such as # PK34513 you would be good to...
    view full answer...
  • Powering a Camper Shell Dome Light if No Wires Can be Found for Power Under the Truck
    There are a couple of things you can do. First, tell me the year, make, and model of the truck and I can try to find a wire that you can use and where it is located. Or you could power the camper shell dome light directly from the vehicle battery via a switch such as # PK34513. And yet a third option; if your truck has the cargo lights around the third brake light then you could tap into that wiring.
    view full answer...
  • Recommended Toggle Switch to Run Lights on an ATV
    The best option for a switch for running the lights on an ATV is a switch like the Pollak Heavy-Duty Toggle Switch, # PK34571. The Pollak switch is a single throw on or off toggle switch. The switch is rated for 12volts and up to 20 amps.
    view full answer...
  • Can 12V Power Wire from 5th-Wheel Harness Be Used to Power LED Truck Bed Light Switch
    You can definitely tap into the 12v power wire from the 5th-wheel harness in your 2013 F250 to send power to an LED light switch. You can use a circuit tester first, like the Draw-Tite # 40376, just to ensure there is power coming from the wire, but other than that there is no reason you cannot do this. For a switch, I recommend the Pollak Light-Duty Toggle Switch # PK34513, which you can connect in-line to the 12V power wire.
    view full answer...
  • Wiring 3rd Brake Light on Truck Bed Cap for 2015 Chevy Silverado 1500
    If you follow wiring harness feeding the 7-way trailer connector from the bumper up toward the spare tire and peel back the wire loom, you should be able to find an additional blue wire in the harness. The blue wire carries the 3rd brake lamp signal for your bed topper. For the interior dome light, you can get 12 volt power from the black wire feeding the trailer connector. You'd want to install a switch on the circuit like part # PK34513. One of the wires would be power, the other ground....
    view full answer...
  • Adding a Switch to a T Connector Powered Converter Box
    Yes you can add a switch like Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads part # PK34513 to the power wire on your wiring harness if you decide you want to shut it down without worries about your vehicle's factory lights not working. I like this switch because it has the Amp rating above what the harness has and unlike a lot of other switches out there it doesn't have the exposed contacts on the back that could lead to shorts. As far as using an ignition...
    view full answer...
  • Does The Pollak Light Duty Toggle Switch Come With A Cover Plate
    The Pollak Light-Duty Toggle Switch # PK34513 does not come with a cover. It has a small screw on nut and on/off tag that would sit outside of the hole to keep the toggle lever in place. I've installed this switch a ton of times in different trailers and I typically just drill a small enough hole to only have the lever stick through. In the video I've attached below I wasn't able to get behind the wall to hide the body of the switch so I used a small metal plate we had laying around to...
    view full answer...
  • Wiring Third Brake Light and Dome Light on a Leer Camper Shell on 2007 GMC Sierra 2500 HD New Body
    The one place I know for sure to access the CHMSL circuit on your 2007 New Body Sierra is under the dash. You will need to look for a wire bundle under the dash, to the left of the steering column. There should be a white tag holding the wire bundle together. There should be an orange wire and that is the CHMSL wire. You can attach a length of wire to this orange wire, route it through the firewall, under the truck, and to where ever it needs to go on the camper shell. Be sure to avoid...
    view full answer...
  • Where to Wire LED Light Strips in a Camper Shell on a 2016 Chevy Silverado 1500
    Use a circuit tester such as # 40376 to test the wires on your 2016 Chevy Silverado 1500 to find the one that carries the 12 volt tow package circuit. It will have power all the time. You can wire up the LED light strips to it via a switch (if no switch is included with the light strips). If you need a switch I recommend a simple on/off switch # PK34513.
    view full answer...
  • Wiring Dome Light and Third Brake Light on a Camper Shell on a 2009 GMC Sierra SLE
    The Curt T-connector # C55384 has a 4-Way flat connector on it. The functions that it carriers are running lights, left turn/brake lights, right turn/brake lights, and ground. If the dome light runs off of the running light circuit and the wiring on the camper shell has a converter that separates out the combined turn signal and brake lights to only include the brake light then this harness will work. However it is probably not likely that the camper shell is wired this way. If that is...
    view full answer...
    Image 1 for
  • Can an On/Off Switch be Added to Prostrobe Spotstrobz - 4 Universal Warning Lights # PRS70780
    If you were to wire in a switch in line on the power input wire on Prostrobe Spotstrobz - 4 Universal Warning Lights Item # PRS70780 that could work for you. A simple toggle switch such as # PK34513 would be good for that.
    view full answer...
  • Can a Diode be Used to Power Lights from 2 Different Power Sources
    You hit the nail right square on the head. Using diode # RM-790 as you have described will allow you to power the lights from 2 different sources (one at a time) without back feeding. It would be best to mount the diode where it is protected from the elements. We also have 10 amp on/off toggle switch # PK34513 that you could mount somewhere on the truck. One wire would go to the vehicle battery and the other would go to one of the inputs on the diode.
    view full answer...
  • Wiring Fog Light on Trailer to Act as Reverse Light and Running Light
    In order to install a fog light that can be used as both a reverse light and a running light on your trailer, you will just need to have a separate 12 volt power wire running to the light assembly. For proper operation and safety, you will need a switch and diodes, which will prevent back feeding. I recommend running wire from the 12 volt circuit on the trailer connector back to the reverse/fog lights. You will need to install a switch like # PK34513 in line with the main power wire that...
    view full answer...
  • Recommended Toggle Switch For Turning LED Lights On and Off When Connected To Battery
    The Alpena FlexLED - 24" Interior/Exterior Blue Lights # ALP77426 draw only 0.24 amps so if they are directly wired to the battery, they will stay on for a very long time before the battery will drain completely. I recommend you add a switch to your lights like the Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads # PK34513 so you can turn your lights on and off without disconnecting the positive battery terminal each time.
    view full answer...
    Image 1 for
  • Is Remote Needed to Run Prostrobe Spotstrobz Warning Lights
    You could run the Prostrobe Spotstrobz # PRS70780 without using the remote if you really wanted to. It would just require your to wire a toggle switch like the Pollak # PK34513 in line on the power input wire, but using the remote is pretty easy and only requires you to plug it into a 12V outlet.
    view full answer...
  • Installing Alpena FlexLED Light Strip
    The Alpena FlexLED, # ALP77426 are 12 Volt lights. You will simply need to connect to a 12 Volt source running the wires in whatever routing (possibly drilling a hole) needed to reach connecting point selected. I suggest you not connect directly to battery but to a 12V circuit that has an off switch. Or, install an on/off switch such as the the Pollak Light-Duty Toggle Switch, # PK34513.
    view full answer...
  • What Size Fuse Comes With The Hopkins 12V Socket
    The Hopkins 12-Volt Socket with Utility Light with Power Wire and Fuse Assembly # HM55125 uses 14 gauge wire. It comes with a 20A fuse. We do not have a kit per say but you could just pull the fuse if you wanted to cut power to it. Or you could wire a toggle switch in line using something like the Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads # PK34513.
    view full answer...
  • Does Push Button Switch for Power Vents # DG52451VP Stay On Once Pressed
    Push Button Switch for Power Vents # DG52451VP is a momentary switch. It is meant to be installed so that when the vent lid is closed it holds the button in which cuts off power to the vent fan. When the lid opens the button is released and it will allow power to go to the fan. Personally I like toggle switches such as # PK34513 because there is just something satisfying about flipping a switch like it.
    view full answer...
  • Recommended LED Flood Light For Snowmobile Trailer
    For your Snowmobile Trailer, I recommend using the Optronics Opti-Brite LED Work Light - Flood Beam - 8 Diodes - Black Aluminum - 4-1/2" Diameter - Qty 1, # TLL45FB. This LED light will give you the light you need and you won't have to do any major modifications to your trailer wiring. You can simply run the light into your running light circuit on your 4 way connector and add a switch in line like # PK34513.
    view full answer...
  • Toggle Switch for a 1988 Ford Ranger
    If you are looking for a toggle switch for custom tail lights or some modifications to your 1988 Ford Ranger, then I recommend the Pollak Light-Duty Toggle Switch # PK34513. Keep in mind, if you are having problems with your tail light wiring, I do not recommend using a separate toggle switch to replace your factory tail light switch. I recommend having a qualified mechanic inspect the truck's wiring.
    view full answer...
  • Wiring in an LED Work Light and Switch to a Trailers Running Light Circuit
    You could certainly use Opti-Brite LED work light # TLL48FB on your horse trailer and put it on a switch but having it wired into the running light circuit could have some unintended issues. Specifically, if you forgot to turn the switch off and drove away with the light still on you would blind driver's behind you! If the trailer has a battery I recommend wiring the light to it directly via a switch. But if you want to go ahead and wire it in line with the running lights then all you...
    view full answer...

< Previous
123. . .4

Do you have a question about this Accessories and Part?

  • Why

    At we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Laura H
Written by:
Laura H
Employee Wilson B
Updated by:
Wilson B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-833-496-1390