bing tracking image
  1. Electrical Tools
  2. Performance Tool
  3. Testers
  4. Circuit Tester
Computer Safe Logistic Probe

Computer Safe Logistic Probe

Item # PTW2991
Retail:$24.99
Our Price: $18.72
You Save: 25%
Electrical Tools
Orders above $50 qualify for Free Shipping
Shipping Weight: 0.73 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
1-833-496-1390 to order Performance Tool electrical tools part number PTW2991 or order online at etrailer.com. Free expert support on all Performance Tool products. Guaranteed Lowest Price and Fastest Shipping for Computer Safe Logistic Probe. Electrical Tools reviews from real customers.
  • All Info
  • Reviews (5)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Performance Tool Electrical Tools - PTW2991

  • Testers
  • Circuit Tester
  • Performance Tool


Features:

  • Quickly tests high and low voltages on all vehicle circuits, including computerized engine and body controls
  • Tests power and ground voltages
  • Bright red and green LEDs interpret voltage signals such as ground, power and frequency
  • Computer safe, drawing less than 7 milliamps
  • Works on 6, 12 and 24 volt systems
  • Recoil lead wire able to reach 10 feet
  • Heavy gauge color coded battery clips

W2991 Performance Tool Computer Safe Logistic Probe



W2991 Computer Safe Logistic Probe

Installation Details PTW2991 Installation instructions


California residents: click here


Video of Computer Safe Logistic Probe

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Performance Tool Wiring - Tools for Wiring - PTW2991 Review

Today we're going to be taking a look at the performance tool computer safe logistic probe. It's going to feature a computer safe design drawing less then 7 mil amps. It will test high and low voltages on all vehicle circuits including computerized engine and body controls. It's going to feature a bright red and green LED. It's going to interpret voltage signals such as ground, power, and frequency. This system is designed to work on 6, 12, and 24 volt systems.

The test probe, that's this portion right here, that's going to measure pretty close to 3 and 3/16 of an inch, right around that area, 3 and 1/8. It's also going to come with your heavy gauge color coded battery clips. A really nice design, easy grip design on those. When the coiled cable or cord is fully stretched out it's going to be able to reach up to 10 feet. When you're ready to use or connect the probe what you'll need to do is you'll need to connect the probe clips to the vehicle's battery. The red clip, again, it's color coded so that's going to go to the positive terminal.

The black clip goes to the negative terminal. You'll need to turn the power on to the component or circuit being tested. Keep in mind the ignition may need to be in on or accessory position. In some cases the engine may need to be running. All you have to do is touch the components circuit wire with the probe's tip.

The LED will glow red if positive source is probed, or green if a negative source is probed. That tip right here, it's going to measure about 3 and 3/16 of an inch long and it's insulated. If the LED does not glow at all the probe may not be making contact with the wire. The wire or the component maybe faulty. Power may not be reaching the circuit or the circuit may not be properly grounded. That's going to do it for today's look at the performance tool computer safe logistic probe.

Customer Satisfaction Score:


Customer Reviews

Computer Safe Logistic Probe - PTW2991

Average Customer Rating:  5.0 out of 5 stars   (5 Customer Reviews)


by:

Exactly what I needed, much better than an old typical test light.




by:

Excellent electrical tester




by:




by:




by:



5
5

See what our Experts say about this Performance Tool Electrical Tools

  • Relay Locations for Trailer Running Lights on a 2009 Ford F-250
    If you are getting no signal when testing the running light pin on your 2009 Ford F-250, with a tester like part # PTW2991, then it very well could be a fuse or relay. When I looked up the online owner's manual for your F-250 it looks like you want to check the relays in the #42 and #55 positions in your Power Distribution Box. Let me know if this doesn't fix your issue and I can help you troubleshoot further. I have linked some helpful articles on wiring to this answer page for you to...
    view full answer...
  • Troubleshooting Trailer Disconnected Code for Integrated Brake Controller on a 2017 Ford F-350
    What you need to do is test the 7-Way connector both on your 2017 Ford F-350 and your trailer. Since your F-350 is new I doubt that it is on the vehicle side but you can use a circuit tester like part # PTW2991 and the attached picture of a vehicle 7-Way to make sure that all of the functions are operating properly. To test the 7-Way on your trailer simply take a 12V battery and ground the negative terminal while using the positive terminal to apply power to each pin on the 7-Way. If one...
    view full answer...
    Image 1 for
  • Locations for Left and Right Turn/Stop Trailer Fuses on a 2011 Ford F-450 Super Duty
    I took a look in the online version of the owner's manual for your 2011 Ford F-450 Super Duty and it looks like the right turn/stop is fuse location 13 while the left turn/stop is fuse location 14 in your passenger compartment fuse box. In the power distribution box (under the hood) the left turn/stop is location 74 while the right turn/stop is location 75. I recommend verifying this in your copy of the owner's manual. If these fuses look good but you still aren't getting a signal when...
    view full answer...
    Image 1 for
  • Troubleshooting Trailer with Brake Lights But No Turn or Running Lights
    That's a very interesting situation because the turn signals should be on the same circuit as your brake lights. Since your 2019 Ram 2500 is pretty new I think the issue is on your trailer, but it would still help to test the connector on your pickup with a circuit tester like part # PTW2991 to ensure you are getting power to your trailer. I have attached photos of which functions should be located on the different pins for both a 4-Way and a 7-Way connector. If you don't get all of those...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Lights Not Working With 2012 Ford F-250
    I would start by using a Circuit Tester # PTW2991 to test your connection at the truck (4-way or 7-way). This will help you to determine where to begin looking. If you are not getting any lights at the connector, I would first follow the connection and look for damaged wiring or a connection that came undone. If still nothing check your fuses and relays on your 2012 Ford F-250. There are quite a lot of them that are tied into the towing circuits. In the engine compartment fuses 22, 26,...
    view full answer...
  • Trailer Taillight Running Lights Not Working
    If there are running lights on the trailer and they are working be sure to check your taillight bulbs first. To test the wiring, first you are going to need a Circuit Tester # PTW2991. I have linked our help article on testing the wiring for 4 and 5-way wiring on a trailer. The first place to start would be to test the connection at the truck connector. This will vary from different connectors. On a 4-way connector it is the brown wire that is the female adapter closest to the single...
    view full answer...
  • Trailer Brakes Will Not Activate When Pushing The Brake Pedal
    If your trailer brakes activate when using the manual override but not when pushing on the brake pedal you may have a bad connection or a faulty brake switch. I have also linked below our article on Brake Controller Troubleshooting. Also if you have a proportional brake controller and you are not moving the trailer brakes will not activate as the controller does not sense the inertia needed to activate the brakes. First I would push on the brake pedal and see if the vehicles brake lights...
    view full answer...
  • Troubleshooting LED Trailer Taillights Ground Connection Issues
    If you are getting power to the taillights themselves than this sounds like a ground wire issue on the trailer or on the vehicle connector. I recommend using a Circuit Tester # PTW2991 to check that you are getting a good ground connection. Use the tester to confirm that the ground connection is present starting at the truck and working your way back trough the wiring system all the way to the taillights. With LED's that require so much less power the ground connections tend to need a better...
    view full answer...
  • 7-Way Trailer Connector Wiring With No Identifying Wire Markings
    I would begin by using a small 12 volt battery to start isolating the wiring. First you will want to trace the wiring to determine which wire is the ground wire. It should be grounded to the frame. Connect the ground to the negative battery terminal. Begin placing each wire individually to the positive terminal and identifying what each wire operates. Once you have identified the wires I have included a wiring diagram for both the trailer and vehicle sides so that you will be able to...
    view full answer...
    Image 1 for Image 2 for
  • Troubleshooting Running Lights Not Working on Trailer Towed with a 2014 Ford F-150
    The easiest way to check and see if something is not working on your 2014 Ford F-150 connector is to use a circuit tester like part # PTW2991 or a multimeter like part # PTW1714 and test the pin for the running lights (see attached pictures). If you are getting power then the issue is on your trailer side but if you don't get power then you either have a bad fuse/relay or the OEM wiring is damaged. When I checked the online version of the owner's manual for a 2014 F-150 the only fuses I...
    view full answer...
    Image 1 for Image 2 for
  • P3 Trailer Brake Controller Shows Trailer Connected with No Trailer and Voltage When Moved
    First, if the controller thinks a trailer is connected that is usually because there is something drawing power on the blue wire. To test this, sever the blue wire a few inches from the back of the controller. Then use a circuit tester such as # PTW2991 to test the end of the blue wire coming out of the controller. It should only show power when the manual override is pressed. If it shows power at any other time then there is something wrong inside the controller and it will need to be...
    view full answer...
  • Troubleshooting NC Connection on Prodigy P2 Brake Controller With Brakes Getting Power
    It sounds like you need to check the tow vehicle and trailer connectors for any corrosion or damage. It is very interesting that your Prodigy P2 # 90885 is reading NC (No Connection) at the same time you activate your trailer brakes. If the trailer isn't connected are you getting 12V of power to the pin in the 5 o'clock position on your tow vehicle? Try testing this pin with a circuit tester like part # PTW2991 to verify this. If there is power coming to this pin without the trailer connected...
    view full answer...
    Image 1 for
  • Troubleshooting Trailer Turn/Stop Signals Not Working
    There are a number of things to check when troubleshooting the left turn/stop and right turn/stop signals not working on your trailer. The first places to start are the connectors on both your tow vehicle and your trailer. Make sure that both are clean and free of any debris or corrosion. If you find something then clean it out and apply dielectric grease # 11755 to help keep the pins in good working order. If those look good then the next step is to determine if the signal is actually...
    view full answer...
    Image 1 for Image 2 for
  • Installing the Red Wire from Prodigy P3 Brake Controller on a 2018 Subaru Outback Wagon
    Typically the brown wire on a 7-Way carries the running light function. If you were to connect the red wire from the brake controller harness, like what comes with the Tekonsha Prodigy P3 # 90195, then your trailer brakes would be active when you turn your headlights on. Because of this it is best to connect the red wire directly to the stop light circuit by the brake pedal on your 2018 Subaru Outback Wagon. If this happens to be a brown wire then all you need to do is use a circuit tester...
    view full answer...
  • Troubleshooting Taillights for Trailer Wiring on 2012 Volkswagen Touareg
    I have attached the installation instructions for # 118668 below. I do recommend using a Circuit Tester # PTW2991 for testing your connections. This will help ensure your ground connectors are working properly as well. I do not see a black wire with green tracer coming out of the black box. The black wire is the 12V constant power. Your output wires are green for right turn/brake, yellow for left turn/brake, brown for running lights and white is ground. I hope this will help you identify...
    view full answer...
  • 2017 Chevy Traverse Troubleshooting No Power for T-One Trailer Wiring
    The T-One Vehicle Wiring Harness # 118271 does come with all of the fuses and relays for your 2017 Chevy Traverse, but if all of those look good I'm wondering if the issue is on your vehicle side. It's definitely possible that it could be the T-One wiring but I recommend using a circuit tester like part # PTW2991 to see if the locations for the fuses are actually passing the power for the circuit. If nothing is happening at the fuse/relay positions then you'll need to take your Traverse...
    view full answer...
  • Trailer LED Tail Light Stopped Working on Right Side
    It sounds like you are missing that 1 connection on the trailer tail light. Typically, a trailer tail light will have 2 or 3 wires. If it has 3 wires then there will be a ground wire (attached to the frame) a wire for brake lights and turn signal (these are the same wire) and a third wire for the running lights. You can use a circuit tester such as # PTW2991 to test the black wire to see which functions it is carrying. Have someone run through the lighting functions in the tow vehicle...
    view full answer...
  • How to Determine Where to Connect Tow Bar Wiring for 2019 Chevy Equinox Premier
    To install the Universal Hy-Power Diode Wiring Kit # RM-154 on your 2019 Chevy Equinox Premier you will need to use a circuit tester like part # PTW2991 to determine what wiring colors for your tail lights carry which functions. Unfortunately we don't have a wiring diagram for your vehicle that I can pass along to you. Attached is an installation video on a 2018 Equinox that you can use as an example but I'd still test your wiring to make sure everything is connected to the proper circuit.
    view full answer...
  • Wiring Connections for Hopkins Endurance on a 1997 Dodge Ram 2500
    According to my research the wiring for your 1997 Dodge Ram 2500 are for the following functions: Black/orange - Tail/Running Red/Tan - 12V Power Green/Red - Left Turn/Stop Brown/Pink - Right Turn/Stop Light Blue - Trailer Brake Purple/Black - Reverse Black - Ground This means that if you are installing the Hopkins Endurance Quick-Install # HM47210 you will want to connect the wiring from your Dodge Ram to the following wires on the Hopkins Endurance: Black/orange - Brown Red/Tan - Red Green/Red...
    view full answer...
    Image 1 for
  • Where to Connect Blue Wire for 4-Way to 5-Way Adapter on a 1999 Toyota 4Runner
    The Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 will connect directly to the 4-Way on your 1999 Toyota 4Runner 4-Way like part # 118341 and then according to my research you will need to splice the blue wire to a Red/Yellow wire behind either of your tail lights for the reverse light function. You will want to verify this wire color with a circuit tester like part # PTW2991 though as your vehicle is older and some wiring could have been swapped out.
    view full answer...
  • Troubleshooting No Power on 12V Pin for a 2008 Nissan Frontier
    The easiest way to determine if a relay is bad is to swap it with a relay that you know is working and see if that fixes the problem. If it is the relay then you will simply need to replace the brown relay that you mentioned like what comes in the Kit # C57000. The only other thing I can think is that the power wire itself is damaged somewhere. I tried looking up your order but I couldn't find anything. If you can let me know what your order number is or the email address you used to place...
    view full answer...
  • Where to Tap Into Reverse Light Circuit to Install Trailer Connector Adapter with Backup Alarm
    To wire in the reverse light wire on Curt 7-Way connector # C57102 for the back up alarm to work you will need to tap into a reverse light wire behind a reverse light on your 1999 Dodge Ram. If you do not wish to tap into the wire there then you can trace the harness to a more accessible location. Then use a circuit tester such as # PTW2991, to find the correct wire before tapping into it. Be sure that the white ground wire on the 7-Way is attached to the truck frame. Otherwise the harness...
    view full answer...
  • Trailer Brakes Intermittently Turn On While Driving without Using Brake Pedal or Manual Override
    It is possible that there is a short somewhere that is intermittently kicking in due to vehicle/trailer position changes as you drive. The likely culprits are the trailer connectors on the vehicle and trailer. You will need to make sure that the connectors are clean and free of corrosion inside and out. To test the controller use a circuit tester such as # PTW2991. Sever the blue wire a few inches from the back of the controller and test the end coming out of the controller while fully...
    view full answer...
  • Finding the Brake Switch Wire to Install a Brake Controller on a 2014 Toyota Highlander
    You have to test the brake switch wires with a circuit tester such as # PTW2991 to determine the correct wire for a brake controller red wire. You want the wire that only has power when the brake pedal is pressed and not with the headlights or turn signals on. On a 2013 Highlander we installed a brake controller on, the brake switch wire was blue. I would start testing with the blue wire on the brake switch if applicable to your 2014.
    view full answer...


< Previous



Do you have a question about this Electrical Tool?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate electrical tool information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H
Employee Mary E
Written by:
Mary E
Employee Zach D
Video by:
Zach D
Employee Erin H
Updated by:
Erin H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.