Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse
(241 reviews)
Price: $68.26
In Stock
Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse
Item # RM76511
Our Price: $68.26
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (241)
- Q & A (0)
- Photos
- Why etrailer?
Roadmaster Tow Bar Wiring - RM76511
- Fuse Bypass
- Bypasses Vehicle Wiring
- Custom
- Roadmaster
- Engine Compartment
- Mini Fuse
Take some of the hassle out of towing your car with this fuse bypass system. FuseMaster replaces your vehicle's mini-fuse and lets you prep for towing by simply flipping a switch. Integrated holder keeps fuse secure and functional.
Features:
- Bypasses towed car's mini-fuse so you can tow your vehicle without draining its battery
- Provides a simple alternative to removing a fuse every time you tow
- Stores fuse so that you won't lose it
- Installs quickly, easily and permanently
- Remove fuse from car's fuse box and install FuseMaster in its place
- Put fuse into FuseMaster fuse holder
- Mount bypass switch near fuse box
- Maintains functionality of mini-fuse when switched on
- Flip switch to "drive" position and drive like normal
- Overrides mini-fuse when switched off
- Flip switch to "tow" position and you're good to tow
- Made in the USA
Specs:
- Application: ATM mini-fuse not exceeding 20 amps
- Harness length: 13"
Note: This FuseMaster bypass is not designed to hold an ATM micro fuse. If your vehicle has a micro fuse, you will need to use an ATM mini fuse of the same amperage (not included) to install in the FuseMaster.
Some cars can only be towed if you get under the hood and pull a fuse. If you don't remove this fuse prior to towing, there's a good chance that your battery will be drained by the time you reach your destination.
Roadmaster's FuseMaster makes it easy to prep your vehicle for towing. Simply remove the fuse indicated in your car's manual and replace it with the bypass. The system will hold the removed fuse and maintain its functionality. So once the initial installation is complete, you don't have to remove or replace your fuse again.
Whenever you need to drive your car, just make sure the switch on the bypass is flipped into the "drive" position. When on, the fuse will be active and your vehicle will function normally. Then, when it comes time to tow, switch the FuseMaster to "tow." This will render the fuse inactive so that you can flat tow your car without its battery being drained.
Installation
The preferred location for mounting the FuseMaster switch is the access panel inside your vehicle that leads to your fuse box. This switch must be mounted on a plastic surface that is no thicker than 1/4". Do not mount the switch on a metal surface.
Included with the FuseMaster are 2 stickers: "Drive" and "Tow." Once the switch is installed, you can place the stickers on the access panel - one on each side of the toggle - to remind you which way the switch must go for each application. Place the "Drive" sticker on the side of the toggle that has the white dot. (To drive, the switch must be flipped so that the side with the white dot is depressed.) The "Tow" sticker can then be placed on the opposite side.
76511 Road Master Fuse Master Fuse Bypass for Towed Cars - Long
Replaces 76510
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2009 Saturn Aura
- 2012 - 2015 Chevrolet Captiva Sport
- 2005 - 2005 Chevrolet Classic
- 2006 - 2010 Chevrolet Cobalt Coupe
- 2006 - 2010 Chevrolet Cobalt Sedan
- 2005 - 2011 Honda CR-V
- 2009 - 2014 Honda Fit
- 2007 - 2008 Pontiac G6
- 2009 - 2009 Pontiac G6 Convertible
- 2009 - 2009 Pontiac G6 excluding Convertible
- 2010 - 2010 Pontiac G6 Sedan
- 2006 - 2011 Chevrolet HHR
- 2006 - 2017 Chevrolet Malibu
- 2008 - 2012 Chevrolet Malibu excluding LTZ
- 2008 - 2012 Chevrolet Malibu LTZ
- 2008 - 2008 Chevrolet Malibu Classic
- 2016 - 2016 Chevrolet Malibu Limited
- 2012 - 2017 Chevrolet Sonic
- 1996 - 2009 Acura TL
- 2008 - 2010 Saturn Vue
Customer Reviews
Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse - RM76511
Average Customer Rating: 4.7 out of 5 stars (241 Customer Reviews)
Take some of the hassle out of towing your car with this fuse bypass system. FuseMaster replaces your vehicle's mini-fuse and lets you prep for towing by simply flipping a switch. Integrated holder keeps fuse secure and functional.by: mbrooking04/12/2016
Roadsters product worked well. I did not remove the lower dash part, and just did extreme yoga to remove and install the fuse bypass. This was the worst part. I can't believe that Honda put this fuse block in such a difficult to access location. The rest was simple. Installing the small connectors was a trick, (I also didn't use the fuse connector) but I finally got the connections in the fuse block. Drilled the hole from the outside and installed the switch. The location could have been lower and more to the left as there was a thicket portion of the dash on the back that prevented the lock nut from seating, but the switch is tight and works well. This is absolutely the way to go instead of pulling a fuse on my 2014 Honda CRV!
Comments
Product is great. Works well and was a fairly easy install.
mbrooking - 02/11/2018by: Kevin k09/18/2016
Very easy to install in my gmc 2013 terrain. Took 5 minutes. Hardest part was drilling hole in fuse box cover. I did not have a 3/4" drill bit so has to drill out edges it largest bit I had. Was fine doing this was. Is expensive for what you get, a fuse holder ,switch, plug in and wires?
by: David03/05/2022
This is the 3rd baseplate I have installed on cars and this bypass switch is a great feature. The plug in to the fuse panel is tricky but easy if you lay on your back with a flashlight.
by: Ron F.03/13/2020
My base plate and tow bar has performed flawlessly since the day it was installed. I took a chance by installing the equipment before picking up my motorhome which was 1,300 miles away - hoping everything would match up as advertised. And it was seamless! First time hook-up went without a problem and the car towed perfectly - and has ever since. I'm totally sold on this Blue Ox towing system!
Comments
Absolutely no problems! A solid purchase that I would make again if needed.
Ron F - 03/15/2021by: Daniel03/12/2022
Great product. Easily install on 2014 Honda CRV. Makes prep for towing a snap.
by: Don G.02/07/2016
I installed the Fusemaster fuse bypass switch on my 2012 Chevy Sonic. Install was a snap. It is mounted on the lower dash to the left of the steering wheel and above the fuse panel. I had to cut the fuse cap off and remove the wire loom to get the plastic nut off the switch. The fusemaster switch will be a great time and effort saver since the DLIS fuse on the Sonic is a pain to remove.
by: Thomas 09/11/2021
Etrailer processed my order quickly and accurately. Fast shipping. The Roadmaster product is superior to the others. It has a longer cable and an alternate adapter for hard to access fuse boxes. Great product.
by: Thomas 11/11/2021
Great product, easy to install, works perfectly. Makes it a lot easier to et the CRV ready to tow. Thanks again etrailer for another great product.
by: Rick02/10/2022
Tammie P was very helpful and knew the products. Everything I needed was available and shipped very quickly. Order arrived in 3 days.
by: Mike 11/11/2021
This fuse bypass makes life so much easier than pulling and replacing the fuse in the very "hard to get to" fuse box.
by: Suzy03/29/2018
I had the BEST installation and service at Etrailer. This was made more evident when a friend got her new hitch from a DIFFERENT RV store. She Towed to the campground and did not fully know how to unhitch or hook up. Etrailer not only taught me all I needed to know about my hitch but took the time to have me learn first hand, with my own hands, how to hitch, unhitch and drive hitched. Etrailer had me drive with a technician and try different procedures behind the wheel — to learn the full do’s and don’ts. Thank you Etrailer.
by: Greg07/18/2022
Great service!!!
by: Peter05/17/2021
I installed this in my Honda CRV. Unfortunately, this cuts off power to the Radio and the 12 volt outlets. I could not use it because of my Tow Vehicle Braking System needs 12v power to operate. I fixed the problem by installing charge lines on my RV and in my CRV.
by: Richard02/28/2022
Just what I needed to make life easier. Thanks George J for the follow up.
by: Roland 09/10/2021
Don’t have to pull a fuse while towing just flip the switch. Makes it a lot easier.
by: Brian05/02/2013
What I needed to take care battery drain situation. After checking around, etrailer.com price was comparably a good price, but nevertheless, this item is OUTRAGEOUSLY expensive for what it is, a plastic switch, fuse holder, wire, and some terminals, with a Roadmaster label. No complaints for etrailer, but the Roadmaster part is just too expensive. I guess I knew that when I ordered it, though.
Comments
Terminals would not stay in place regardless of how they were ed. I modified the terminals by using a mini-fuse tap that worked like a plug. Inserted the supplied terminals into the tap, then secured them with electrical tape. Next, I cut off the wire pig-tail on the tap. The mini-fuse tap actually fits in micro-fuse with a click, and is much more secure than the spades supplied by Roadmaster. For the price, it should have come with plug, instead of having to modify the tiny spade connectors.
Brian - 05/02/2014Thanks for the follow-up after a year of use, and for the additional information!
--
Rachael H - 5/8/2014Comments
Absolutely outrageous price and I have to do the same modification to the connection to the fuse panel using a mini fuse connection. The original design is terrible.
-- comment by: Pete P - 04/08/2015by: Leroy and Jerald H11/19/2021
I had more trouble explaining it to my dad than I had installing it. This works great.
by: Ken Mc10/09/2013
I love the fuse bypass. I used it in my Honda CRV which requires a fuse to be pulled each time the car is towed, then replaced when you want to use the radio. Once installed, taking out the radio fuse is a simple push of a switch. The only problem I encountered was gettin the two loose ends into the fuse socket, and once there I felt it necessary to jam in some foam to keep them in place. It would help if Roadmaster would connect the leads like an actual fuse. Other than that it works exactly as advertised.
Comments
So right you are. I could not get the two loose ends into the fuse socket. It was designeed for a Mini Fuse not the MICRO fuse in my Honda Fit. Roadmaster need to fix this with an actual fuse-like connector end.
-- comment by: Bill - 05/21/2014by: Brian02/10/2022
Works great! Easy install
by: Don L02/10/2014
Relatively easy to install, instructions were clear and concise .
I am very impressed with service received from you folks.
This is the third time I have ordered from you and all three times the service has been exceptional .
I will certainly be ordering again as I need more products.
Thanks!
Comments
Product works fine and I am still very happy with my purchase
Don L - 03/03/2015by: Ralph01/21/2013
Product was received in a timely manner and is as indicated in the web site. I have bought several items from this company and have been very pleased with their products and service.
Comments
No problems with anything. Everything has worked as expected. I would order from this company again if I have additional needs.
Ralph - 07/22/2014by: R J08/21/2015
Install video was a definite help.The service was great and the shipping on time. Installed in less than one hour.
Comments
Handy accessory looks factory
Richard S - 08/20/2016by: W. Dore 07/19/2016
This product though I was able to make work for my application was not the exact match for my vehicle. The connections that take the place of the fuse in the fuse box were not compatible. My CRV has micro fuses and the connection prvided was for mini fuses. However once I got past that problem everything else worked fine.
Comments
Still working fine.
W. D - 07/19/2017by: Jim D07/13/2016
This is a great solution to an aggravating problem of pulling a fuse before towing. First, the fuse, which is miss-identified in the 2014 Honda CR-V driver's manual, is nearly impossible to access. Further, the advice in the driver's manual that if you tow less than 8 hours per day you do not need to remove the fuse, is incorrect. I discovered that only 4-5 hours was enough to kill the battery. Installing the RM76511 bypass seemed, at first, to be a piece of cake. I drilled the 3/4" hole and inserted the switch for a pretty tight fit, then found it impossible to screw on the plastic retainer nut. I accidentally discovered that this portion of the Honda CR-V dash can be unclipped and pulled out so you can easily get to the back of the threated switch and tighten the retainer nut. Had I not discovered this I would have not been able to install the "Drive/Tow" switch. Unless I missed it, there is no mention of this in the video or written instructions. After getting the switch installed the rest of the installation was easy.
25
241
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Will Using Roadmaster Fuse Bypass Shut Off Clock and Cause Radio Presets to Be LostIt very well might. Different circuits are affected in different vehicles. The reason you pull the fuse or bypass it is to prevent the vehicle battery from being discharged while its being flat towed. Try pulling the involved fuse first for a few seconds, and then replacing it. If you lose the clock and radio presets, you know that using the fuse bypass will cause the same thing.
view full answer... - Fusemaster Bypass Harness Recommendation for a 2010 Honda CR-VThe Roadmaster FuseMaster Fuse Bypass # RM76511 is a universal fit item that is designed to fit as many vehicles as possible. CR-V owners have found that the install is a bit more difficult than usual, but it is still possible. I attached an install video that shows it being installed on a similar 2013 Honda CR-V as yours for you to check out though.
view full answer... - Battery is Draining when Flat Towing 2013 Chevy Captiva Behind a Motor HomeI checked the vehicle owners manual for the 2013 Chevy Captiva and could not find anything else that would lead to the battery draining. The fuse you are pulling is the right one and if the key is in the correct accessory position then nothing else should be lit up. Make sure that everything is off including the radio and the heat/AC. If you are using a supplemental braking system that requires a connection to the vehicle battery that could be causing the battery drainage, especially if...
view full answer... - Do Fuses Need To Be Pulled To Flat Tow a 2011 Ford Flex Behind a Motor HomeThanks for your recent order! The Roadmaster fuse bypass # RM76511 is great because all you need to do is flip a switch to activate or deactivate the fuse. It's not a requirement though and based on my research, your owners manual doesn't say anything about pulling fuses to flat tow your 2011 Ford Flex. I also checked with Roadmaster and fuses don't need to be pulled. It's still a good idea you check your owners manual just in case. I included a helpful article and installation video...
view full answer... - Will Fuse Bypass Installation be Similar Between 2009 and 2012 Model Years of Honda FitYes, since the 2009 and 2012 model years of the Honda Fit are both part of the same second generation the installation of the Roadmaster FuseMaster Fuse Bypass # RM76511 will be essentially identical for the two vehicles. The video for the 2012 model is linked for you. You may also want to refer to the linked article on flat towing a vehicle like your Fit. There are several components required for safe and legal flat towing in most states and all of those items are detailed in the linked...
view full answer... - Fuse Bypass For a 2011 GMC Terrain for Flat Towing Behind a Motor HomeFor your 2011 GMC Terrain you will need to use the Roadmaster FuseMaster fuse bypass switch, # RM76511. I have also included a link to the installation instructions for you. The use of this product will make it easier to bypass the fuse by allowing you to bypass it instead of pulling it every time.
view full answer... - Do Fuses Need to be Pulled When Flat-Towing a 2013 Honda CR-VYes, you absolutely have to remove the fuse from your 2013 Honda CR-V when flat-towing. One option that will alleviate this process is installing a Roadmaster # RM76511 Fuse Bypass System. This unit is basically a permanent solution being that it is hardwired into your vehicle. There is a rocker switch that you depress when you are either driving which will activate the fuse or towing which will de-activate your fuse. By using this product, you do not have to worry about removing the fuse...
view full answer... - How Does the Steering Wheel of a Push Button Start Vehicle Get Unlocked for Flat TowingFor your 2011 Ford Edge you want to first consult the owners manual to determine what the flat towing procedure should be and if there are any restrictions. Typically on vehicles with push button starts to get the vehicle to unlock the steering wheel you would need to have the key in the car, and without pressing the brake of the vehicle press the start button. That will put it in ACC mode which should unlock the steering wheel. The procedure you will need to follow will be outlined in...
view full answer... - Do Fuses Need to Be Pulled to Flat Tow a 2002 Honda CR-VIf pulling a fuse was required to flat tow your 2002 Honda CR-V it would be listed as a requirement under the recreational towing section of the owners manual. I did some checking as well and couldn't find any info that said a fuse needed to be pulled on your vehicle.
view full answer... - Recommended Fuse Bypass Switch to Flat Tow 2015 Chevy SonicSince your 2015 Chevrolet Sonic must have fuses pulled in order to flat tow, you will want fuse bypass switch # RM76511. This part is a confirmed fit for your vehicle. This will let you prep for towing by flipping a switch. I have included a link to the installation instructions for you to check out as well.
view full answer... - Fuse Bypass for Flat Towing a 2012 Chevy Captiva Behind a Motor HomeYour 2012 Chevy Captiva should use fuse bypass # RM76511. This model fits in place of an ATM mini-fuse. I have linked a video showing an example installation on a 2013 Captiva Sport. If the fuse you are pulling is not an ATM mini-fuse, let me know what it is and I can determine if we have a bypass that fits.
view full answer... - Fuse Bypass Wires Do Not Seem Very Secure in 2013 Honda CR-V Fuse PanelYou really don't have anything to worry about because while you are flat towing your 2013 Honda CR-V power to that fuse will be shut off. Should the connectors come out it would not matter since there is no power to that fuse. But when just driving the vehicle it could be an issue should the wires come out. You might be able to get a better connection if you can get some of the other fuses out of the way so you have room to work the terminals in better, then put the other fuses back. Our...
view full answer... - Can the Roadmaster FuseMaster Fuse Bypass # RM76511 be Used with a 10 Amp FuseYes, the Roadmaster FuseMaster # RM76511 that you referenced can be used with a 10 amp mini fuse. This product is rated to handle up to 20 amps so it should work well for you with only a 10 amp fuse on your Land Rover Range Rover. I attached an install video for this product for you to check out also.
view full answer... - Fuse Bypass Recommendation for a 2013 Chevy Captiva SportI did some checking and it looks like the recommended fuse switch that you need is the Roadmaster FuseMaster Fuse Bypass part # RM76511. Check out the installation videos I attached as well.
view full answer... - Is the Roadmaster FuseMaster Used in Place of Tow Bar WiringThe Roadmaster Fusemaster Fuse Bypass part # RM76511 that you referenced is designed for vehicles that require the removal of a fuse in order for them to be flat-towed. Instead of having to remove the fuse you would simply install this product and it would give you a switch that would allow you to disable the circuit without the hassle of actually removing the fuse. I attached an installation video for this product for you to check out to give you an idea how it works. For tow bar wiring...
view full answer... - Which Fuse has to be Pulled to Flat Tow a 2013 Honda CR-V Behind a Motor HomePage 236 of the owners manual for a 2013 Honda CR-V states for extended towing you will need to remove the 7.5 amp accessory radio fuse located in the interior fuse box. This fuse should not be too difficult to pull but if you wanted to use a fuse bypass it is # RM76511. There should not be a problem installing any tow package components under the vehicle. For any wiring you can zip tie it up to an existing wiring harness. Avoid areas that may pinch or burn the wiring.
view full answer... - What Fuse Needs to Be Pulled to Flat Tow a 2014 Honda CR-VThe "radio" fuse of your 2014 Honda CR-V will need to be pulled and replaced with the Roadmaster FuseMaster Fuse Bypass part # RM76511. This product will make it easy to deactivate this circuit, you will only need to flip a switch instead of remove the fuse every time you tow.
view full answer... - FuseMaster Bypass Recommendation for Pulling Fuse of 2013 Chevy Equinox for Flat TowingYes, I checked with Roadmaster and the FuseMaster Part # RM76511 is recommended for your 2013 Chevy Equinox so it would be a great option to make deactivating the circuit needed to flat tow your vehicle. I attached an install video that shows this product being installed in a similar 2014 Chevy Equinox as yours.
view full answer... - Which Fuse to Pull and Its Location to Flat Tow a 2013 Chevy Captiva Sport Behind an RVIn the 2013 Chevy Captiva there is an in-cab fuse panel located on the driver's side in the bottom left kick panel. You will need to pull the 2 amp fuse labeled PWR/Moding which should be in the bottom right corner above another fuse labeled CIM. This information and other specific information on flat towing the Captiva can be found in the owner's manual. Use the index to find the recreational towing section. The fuse is in an easily accessible location but you do have the option to install...
view full answer... - Which Fuse to Install the FuseMaster Fuse Bypass on for a 2010 Honda FitAccording to the online version of the owner's manual for your 2010 Honda Fit you will need to remove the Radio fuse from the interior fuse block which is in the 61 position. This is where you will want to install the Roadmaster FuseMaster Fuse Bypass # RM76511. Attached is a sample installation video of this fuse bypass on a 2007 Honda CR-V that you can use as a reference to get an idea of what the installation looks like. Please note that a complete flat towing setup includes a base...
view full answer... - Roadmaster FuseMaster Fuse Bypass for 2006 Honda CR-VThe Roadmaster FuseMaster Fuse Bypass # RM76511 will work well for your 2006 Honda CR-V. I spoke with my contact at Roadmaster and he confirmed that if you need to pull a fuse before towing your 2006 CR-V, the # RM76511 fuse bypass will work well for you. I found the owner's manual for the 2006 CR-V to state that the 15amp Front Accessory Power Socket fuse should be pulled when towing your vehicle for a long period of time. The # RM76511 will work well to make "pulling" this fuse much...
view full answer... - Fuse Bypass Recommendation for 2017 Chevy SonicThe correct fuse bypass to use on a 2017 Chevy Sonic is the part # RM76511. I attached an install video that shows the kit being installed in a similar 2016 Chevy Sonic as yours as well.
view full answer... - What Fuse of 2012 Honda CR-V Needs to be Removed to Flat TowOn your 2012 Honda CR-V, the 7.5 amp radio fuse needs to be removed. To give you the simple fuse bypass, you can use the Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicle # RM76511. I've attached a photo of your owners manual to assist.
view full answer...
- What Fuse to Pull Before Flat-Towing a 2013 Honda CR-VThere are two different fuse boxes on your 2013 Honda CR-V. There is an engine bay fuse box and an interior fuse box. The 7.5 amp ACC fuse that you will need to pull prior to towing the vehicle for more than 8 hours is located in the interior fuse box in the #19 position. In order negate having to open the cover and pull the fuse each time you can install the Roadmaster FuseMaster Fuse Bypass part # RM76511 which will allow you to cut power to the fuse with the flick of a switch. You will...
view full answer...
Do you have a question about this Tow Bar Wiring?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality tow bar wiring for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate tow bar wiring information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Andrew L
Video by:
Kathleen M
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Isabelle B
Installed by:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.