To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Convenient and durable cover protects your Reese Elite Series gooseneck trailer hitch from dirt and debris by concealing the hitch hole when the ball is removed.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Reese rubber hole cover for the Reese Elite Series under-bed gooseneck trailer hitch. Now this protective cover will help keep dirt and debris from getting into your Reese Elite Series gooseneck trailer hitch when the ball is removed. It is a durable, rubber construction. A few measurements on this, the inside diameter, the hole it goes in is 2 3/8 inches in diameter. The total outside diameter is right at 3 1/2 inches. Now basically what will happen on your gooseneck hitch when you remove your ball from the gooseneck hole, you can just pop this into it, and it will keep any dirt and debris from getting down in there.
That should do it for the review of the Reese rubber hole cover for the Reese Elite Series under-bed gooseneck trailer hitch.
Average Customer Rating: 4.8 out of 5 stars (70 Customer Reviews)
Convenient and durable cover protects your Reese Elite Series gooseneck trailer hitch from dirt and debris by concealing the hitch hole when the ball is removed.This plug did not fit the 5th wheel mount holes on my 2021 GMC Sierra AT4. Perhaps I ordered the wrong thing.
Aside from not fitting, Reese is a great brand and these plugs are made of good quality rubber.
I did not use this product quite as intended, but i was perfect for what I needed. I bought a new boat that needed several covers for the holes in the flooring for seat poles that were not being used. The inside sleeve of the covers were just a tad small so I glued a pipe end cover on each one and they work great.
Ethan B.
7/22/2020
Great!
Fit perfectly into my factory Ford gooseball receiver.
2012 F.
3/24/2023
Had it for a year. It pops out occasionally when loading or unloading gear, but havent lost it yet and it easily pops back in.
This item most definitely fits the factory installed fifth wheel prep unit for a 2018 Ford F-250 Super Duty. This is a Reese cover #30136 and actually fits better than the flat one that came from the factory.
First time ordering and the delivery was very prompt. The replenishment team and customer service was outstanding! Every step of the process was seamless. I was informed on status right up to the delivery. Would give me experience a 10 star rating if it was available.
My 2012 Ford F350 SuperDuty came with the Resse Gooseneck under bed hitch set up. After I had the ball removed I needed a cover to put over the hole that was now in by truck bed. I contacted Molly and she hooked me up with the Reese Elite Rubber cover. It fit perfectly and protects the hitch and looks great.
Fits Ford OEM gooseneck receiver as reported. Fits so well I wish they made a trim ring to replace the OEM part.
Rich
12/6/2017
Parts are great. I’m using them with my OEM underbed hitch adapter. They fit perfectly and stay in place better than OEM parts. Just wish Reese made a trim ring for the gooseneck hole to go with their plug.
Fit just right on my gooseneck ball ope ning
Scott
11/18/2019
Cover has stayed on, no problems, no wear or tear, very happy with the product
I was looking for a turnover ball gooseneck 5th wheel setup. I came across etrailer. I ordered the B&W gooseneck for my 2013 dodge 3500. Fit like a glove as they show on their videos. I ordered it Monday it showed up that Friday. Great job E trailer. Nice to see customer service again thank you very much. Definitely be ordering from them again.
Dan
Cameron Park Ca.
Thank you for the quick shipping and excellent customer service. The Reese Gooseneck plug and bed filler plugs worked perfectly on my factory installed hitch in my 2011 F350. I will be back for future trailer needs! Thank you!
I like the look. But it hangs out over the edge of the bumper because it is so large in diameter. The item was supposed to be a match for my 2005 Dodge Dakota, but it appears to be made for a larger bumper with a deeper recess perhaps. Seems to be 'cosmetic-only'. If water splashes up from the underside, it will cause the water to retain inside the bumper--resulting in probable premature corrosion. However, if I install a hitch using that center hole, the plug will be a good cosmetic and weather-proofing addition. So, I guess the plug is useable with a hitch, but not solely to hide the big unused hole in the bumper.
I purchased this cover to plug a hole in the bottom of the bed made by the previous owner for a gooseneck trailer hitch. Works great!
Nice tight fit. Direct fit for Ford factory gooseneck
Great product and customer service. I will definitely do business again with etrailer.
Mickey
9/12/2019
I have had your pick covers for a year and they work great
Just rec'd the product I ordered and it came as pictured. Using for a different purpose --- to fill the hole in each of my rear pedestal seat-bases that I seldom utilize on my Crestliner fishing boat. Fit nicely, and appears to be heavy enough to not blow out on the move. Won't know until open-water season arrives this next month. Can always glue down, I guess.
Had to replace the puck cover in our F-350. Gentlemen on the phone was very helpful and it arrived today. Fits perfectly. Much less expensive than buying a whole kit from Ford.
This fit my factory installed gooseneck package on my 2019 Ford F-350 Super Duty great.
Using as a rain cover for a pedestal base of a fishing seat. Works great!
At some point I had lost the Ford Factory goose neck cover, this one fits spot on.
The Reese goose neck plug was as described. Fast shipping
Fit my 2020 Super Duty.
Great from start to finish. Good stock of items that no one else was able to or cared to help me find. Great experience dealing with your company.
Paul B.
7/28/2021
As good as the day they were installed!
You said it would work on a ford goose neck and it did . Great product and fast shipping
Good quality product and the correct fit - thanks to good etrailer product info.
Fit perfectly in a factory Ford receiver for a 2017 F350.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
4/17/2024
In order to ensure that these will fit, you will need to make sure that the inside diameter of the mounting hole is 2-3/8 inches.