bing tracking image
  1. Accessories and Parts
  2. Reese
  3. Trailer Hitch
  4. Hardware
Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick

Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick

Item # RP3022
lowest price pledge
Retail:$11.71
Our Price: $6.53
You Save: 44%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.19 lbs
Quantity: 
Reese Accessories and Parts - RP3022
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Replaces (1) 3" long x 1" wide x 1/4" thick spacer block for your trailer hitch receiver. 1-800-940-8924 to order Reese accessories and parts part number RP3022 or order online at etrailer.com. Free expert support on all Reese products. Guaranteed Lowest Price and Fastest Shipping for Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (164)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Reese Accessories and Parts - RP3022

  • Trailer Hitch
  • Hardware
  • Reese

Replaces (1) 3" long x 1" wide x 1/4" thick spacer block for your trailer hitch receiver.


Features:

  • Replaces a 3" long x 1" wide x 1/4" thick spacer block for your trailer hitch receiver
  • Quantity: 1 spacer block


3022 Reese Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick





Video of Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Reese Trailer Hitch RP3022 Review

Today we're going to take a look at the spacer block. This spacer block is normally used in a situation where you're going to be using a fish wire or a bolt leader, something like this, to bring a bolt through a hole that's in a closed vehicle frame. You want to use the spacer block with the bolt, usually like a carriage bolt like this that would go through the spacer block. You want to hold that into the frame. You'll use the bolt leader or fish wire to attach to the end of this bolt, along with the spacer block, and bring it through the hole in the frame. When you detach the bolt leader, it will leave your bolt sticking out thought the vehicle frame to allow you to hook your trailer hitch to your fifth wheel, your gooseneck, or any other item like that. Just to give you a few dimensions on this spacer block, overall length on it, it's going to be right at three inches.

The width on it is right at one inch. The thickness is right at a quarter inch. That should do it for the review on the spacer block.


Customer Reviews

Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick - RP3022

Average Customer Rating:  4.9 out of 5 stars   (164 Customer Reviews)

Replaces (1) 3" long x 1" wide x 1/4" thick spacer block for your trailer hitch receiver.

by:

Part are as stated and will work well on hitch install
Did take extra time for delivery due to supply chain issue
No fault of etrailer
Communication with me was excellent




by:

The hole in the block must be in Metric size for a Canadian built vehicle. Otherwise the Receiver is very versatile. First as a receiver, second to hold a winch, third to hold a boat cradle over the roof of the truck.


Comments
These are typically used with a bolt leader to bring a bolt through a hole in a closed vehicle frame. This spacer block fits a half inch carriage bolt.
-- Etrailer Expert Sierra K - 12/13/2021


by:

A police car pulled into my lane and hit me head on. I escaped without injury but my car was totalled ( photo attached). I salvaged my brand new trailer hitch but the company that put it on would not install it on my new car because there were two bolts and spacers I was unable to recover. Luckily I learned they got the hitch from etrailer. I called and got Rose who was very friendly and helpful and soon had my parts on their way to me. Wish all my purchases were this easy.




by:

Product was fine, I had to take the hitch to my local shop because I couldn't get the last bolt through to complete the installation. My SUV really benefited from being put on a lift by my local shop, they completed the installation.




by:

Very robust. Exactly what I needed to mount my hitch on my VW GTI.




by:

I purchased a used hitch for my CRV and did not have all the hardware to install it. I called etrailer and received great customer service and was able to get all the hardware that I needed to make the installation a breeze. I would definitely recommend the bolt leaders if you're going to be doing installation yourself it made the job a lot easier on me.




by:

This part was on back order but was sent as soon as it came in before the expected date.




by:

These backing blocks were like the original equipment and worked perfectly. Shipping was very quick.




by:

Thus is a bad news good need review. The package was delivered as told bad news the package was damaged and spacers missing. Good news call to customer service was quickly answered and a re ship was done same day.

I have bought several things from etrailer always as promised with some of the best customer service of any online company I buy from.


Comments
Great
John S - 11/14/2019



by:

I can't find these anywhere other than here. I wish I would have added a few to my original order in anticipation that I was going to break a weld nut during the install process. Would have saved time and shipping cost! But, once I had it in hand, it worked great for my hitch install.




by:

I used this to help with a Jeep XJ trailer hitch install. I pretty much destroyed the install wires due to the way I had to fish the parts through the frame area, but the install was successful.




by:

Worked perfectly as I was installing my trailer hitch, which is a simple task but ran into an issue. The bolt holes were pretty corroded on the right side so they needed the threads cleaned, with good ole WD 40 I continued to clean with a tap. After getting 2 done the center one weld nut break off inside the frame, as they have very small tack welds from factory holding them on. So I ordered up this bolt, plate, washer, leader, and a nut to fix the issue, it was simple and an easy fix to a problem at first I wasnt sure how I was going to fix. Fast shipping from etrailer.com and it was done ready to be used in a jiffy. Highly recommend


Comments
The parts are doing what they were intended to do and super happy with my purchases. If I am ever in need for future vehicles etc I wouldnt hesitate to buy from you again. Thanks again Ryan thumbs up
Ryan T - 01/16/2018



by:

glad to see you can buy parts individually to put on a trailer hitch


Comments
very good product to get the job done right
Russell A - 10/30/2020


by:

Exactly what I was looking for and it matches the description on the website. Couldn't be happier!




by:

I had to grind the ends down a bit and round the corners to make them fit where I needed them to go. However, they worked perfectly!




by:

Delivery was fast. Wanted to put hitch on
A different car(same model/year) and not used stressed bolts. Needed spacers and leaders so purchased the items needed from one location,in one box.




by:

Good product, easy transaction!!!




by:

I haven't used this product yet; however, I am 100% satisfied of the communication with etrailer regarding this product of being on hold to them. I still received it quickly and uneventfully. I order 10 and got 10 even though I just needed 2 because I am sure this item will come in handy with other applications other than reattaching receiver hitches. The carriage bolts required for this product was easily located at the local Tractor Supply.

Thanks etrailer




by:

How easy was the install of my 2008 Ford Escape hitch?

I watched the video and then I installed my hitch two days before I was scheduled for rotary cuff surgery. My right shoulder was more cosmetic than functional for heavy lifting. So, patiently, with jacks at the ready, I installed my hitch. I had to call on my wife once to hold a screw driver, otherwise, I did it solo.

In total, it took less than an hour and I needed one arm, an adjustable wrench, vise grips to hold the lead wire, some floor jacks and a wife (for about 15 seconds after she stopped asking questions.)

I didn't do the electrical, because I'm using it for bike racks only.




by:

Received my package for lost parts for my Curt 13333 hitch for my Ram 1500. I thought shipping was a little exaggerated for 4 small parts, but this was the only places I could find them. Prices for the actual parts were excellent.

The spacers were simple steel with a square hole in them, not a big thing, but difficult to find elsewhere and impossible for a DIYer to make.

Be warned, if you plan on purchasing item 8101-1, the 1/2" bolt leader, they are cut WAY TOO SHORT. Plan on buying 2 and make small hooks on the ends and tape the ends together, that's the only way to use them.




by:

Etrailer,
A new-to-me truck meant a
new hitch installation. Needing the mounting hardware for a hitch that I already own, I tried several local vendors for the needed parts to no avail. After a brief internet search, I easily located the bolts, nuts, washers, and fish wire on your website and placed an order. Then, WOW! The level of attention and communication from your staff regarding my order was incredible. The order and the communication was timely, accurate, and thorough. I am now a loyal customer. Thanks for the great experience! Wish me luck in not busting my knuckles during installation.

-Chris




by:

Received the spacer blocks today and they are excellent. Good quality and they are very difficult to find. I read several internet forums topics where people spent loads of time and money trying to create these things. This is the cheapest and simplest option i could find on the internet. Also the bolt leaders save a lot of time from trying to devise a solution to pull a bolt through narrow frame rails. With these leaders the bolt hole only needs to be as big as the bolt itself because the leader does not take up any space and holds the bolt very securely.




by:

This carriage bolt block was impossible to find locally. Couple this with the bolt leader wire and the how to video on this website and I had zero issues. I was actually amazed at how quickly I was able to fish the bolt/spacer combo into the frame of my car to fix the broken weld but issue. Now all I need is the bolt up the hitch. Thanks etrailer!




by:

Thanks etrailer for the parts to install a hitch receiver on my son's 08 Ford Escape Hybrid. I had the receiver but not the hardware backing plates. these fit perfectly. reasonable prices and quick shipping.




by:

I applaud etrailer.com after I did not receive my order in a reasonable amount of time, I called etrailer.com and they were very responsive and quickly got my order to me. Great job! This unique product was tough to find anywhere else and it will work great when I install my receiver hitch assembly.



25
164
Show More Reviews

See what our Experts say about this Reese Accessories and Parts



  • Is Trailer Hitch Spacer Block # RP3022 Sold Individually
    The Trailer Hitch Spacer Block # RP3022 that you referenced is sold individually.
    view full answer...
  • What is the Trailer Hitch Spacer Block Made From
    The Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick # RP3022 is made of carbon steel, so it will be susceptible to corrosion. You could put a coating of some sort of Plasti-dip type substance on this before installation to help protect against that, but I don't believe it's completely necessary because of the typical use of this part will shield it from most direct exposure to moisture.
    view full answer...
  • Replacement Spacer Block to Install a Trailer hitch on a 2012 Ford Focus
    I doubt a hardware store would have one but you never know. Block # RP3022 could work. the only difference is that the original is 1/4 x 7/8 x 3 inches and this one is 1/4 x 1 x 3 inches. I am sure the frame is wider than 1 inch!
    view full answer...
  • Replacement Spacer Block For Trailer Hitch On 2000 Honda CR-V
    The spacer block you can order is part # RP3022. This block measures 1/4 inch thick and is 1-inch wide and 3-inches long. Trailer Hitch Hardware is designed for a one-time use only and if the hitch is being re-installed I recommend replacing all of the hardware for installation. For the kit you would need part # RHK. Then put your hitch number in the box and from the drop-down menu select the hitch manufacturer. The complete hitch installation kit will be sent to you.
    view full answer...
  • Availability of Spacer Block for Trailer Hitch Installation on 2017 Chrysler Pacifica
    I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block # RP3022. The size of this spacer block is 1/4" x 1" x 3". If you are looking for replacement hardware for the trailer hitch on your 2017 Chrysler Pacifica, you will use part # RHK. You can type in the trailer hitch item number in the text box on this product page and it will give you the correct replacement hardware kit, including...
    view full answer...
  • Do You Carry the Square Hole Spacer and the Fish Wire for the Curt Hitch # C15572?
    The .250 x 1.50 x 3.00" square hole spacer, the .188 x 1.00 x 3.00" square hole spacer, and the 1/2" x 30" fishwire for the Curt Trailer Hitch Receiver - Custom Fit - Class V # RP3022 are available with the Replacement Hardware Kit for Trailer Hitches # RHK. I confirmed with Curt that you will need to purchase the entire kit to replace the hole spacers and the fishwire you need. They cannot be ordered individually outside the rest of the kit. Once you get to part # RHK on etrailer.com,...
    view full answer...
  • Completing Hitch Install on 2008 Toyota RAV4 after Weld Nut Breaks
    Your best bet would be to use the spacer block you referenced, in conjunction with a grade 5 or higher, 1/2 inch by 1-1/2 inch carriage bolt, lock washer and nut. You would use a fish wire like part # 80101-1 to fish the bolt and the block washer up into the frame member through the access hole shown in the photo and out the hole where you want to install the hitch. You might need to slightly enlarge the access hole as shown in order for the head of the carriage bolt and the block washer...
    view full answer...
  • Having Trouble Getting Curt Trailer hitch to Sit Flush on the Frame of a 2015 Toyota Highlander
    It is not uncommon for some hitch installations to require spacer blocks of some kind to get the hitch to install properly. If they are required in your situation then it is permissible to use them. A spacer block such as # RP3022 could be used unless Curt recommended to you a specific spacer. You will want to make sure the hitch is level by using spacer blocks equally on the left and right side as needed. Since this is on a very new vehicle, the material that is causing the fit issue...
    view full answer...
  • Dimensions of Spacers Included in Hardware Kit for Draw-Tite Sportframe Trailer Hitch # 24805
    Draw-Tite Sportframe Trailer Hitch # 24805 includes two sizes of spacers among its included hardware. The larger spacer, part # RP3022 if ordered on its own, measures 1/4 x 1 x 3-inches. The smaller spacer measures 1/4 x 1-1/4 x 2-inches. All the hitches we sell include the required hardware, which is for one-time-use only. We can supply replacement hardware kits for all of the hitches we sell, part # RHK. To order hardware for your hitch enter that part number RHK in our search box and...
    view full answer...
  • How to Order Replacement Hardware for a Curt Trailer Hitch
    Hitch hardware is almost always Grade 5. The Curt Hitch part # 13408 is no exception. Going with Grade 8 certainly wouldn't hurt anything though. To order replacement hardware you will need part # RHK. You will need to select your hitch manufacturer and part number.
    view full answer...
  • Spacer Block and Bolt Size for Trailer Hitch 75270
    The Draw-Tite Hitch # 75270 that you are installing on your 2008 Honda Odyssey uses M12 X 1.25 X 35mm bolts and 1/4“ X 1-1/2“ X 2” spacer blocks and you can get replacement hardware for this at part # RHK. We do not have these parts available individually but you should be able to source them at a local hardware or auto parts store.
    view full answer...
  • Fish Wire Bolt Leader And Spacer Block Needed
    We will have some of these items. The Curt Fish Wire Bolt Leader - 7/16", part # C58410, is the pull wire you are inquiring about. The spacer block is part # RP3022. I have included product description links and video demo links below.
    view full answer...
  • What Size Carriage Bolt Fits Spacer Block # RP3022
    Block # RP3022 is designed for a 1/2 inch carriage bolt. The matching nut is # 55178 and the matching conical tooth washer is # 01292-008.
    view full answer...
  • Availability of Replacement Spacer Blocks for Curt Trailer Hitch C13362
    While we don't have just the CM-SP12 spacers for the Curt Trailer Hitch Receiver # C13362, you can either get a complete replacement hardware kit with part # RHK or you can just get 2 of the Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick # RP3022 from Reese and trim the length to 2" (1/2" off of either end) since Curt doesn't offer single replacement parts for their trailer hitches.
    view full answer...
  • Bolt for Hitch Will Not Torque Down
    If a bolt will not torque down while installing a trailer hitch this means the bolt was likely cross threaded. There are a few options to fix this, the first would be drill out and then re-tap the hole with the next largest thread size using a kit like the Tap Wrench Kit for Standard Pipe Sizes part # PT22FR. The weld nut however could break when tightening down the new bolt so in which case the final option would be to drill the rest of the weld nut out and then using a spacer block like...
    view full answer...
  • Solution for Draw-Tite Trailer Hitch Installation With Broken Weld Net on Kia Sorento
    A grade 8 carriage bolt would be fine to use to install the # 75684 and is comparable to the metric 10.9. In addition to the bolts you will want a spacer block # RP3022 as well as 1/2" Bolt Leader # 80101-1. You can use the bolt leader to fishwire the bolts and blocks through an opening in your frame to get them in place for installation. I have attached a helpful video to show what the process is like along with an installation video of the hitch itself.
    view full answer...
  • Replacement Spacer Block For Trailer Hitch Receiver
    You'll need a new spacer block if you lost one inside your frame somehow, as a magnet scope is the best bet. So what you'll need to do is match up the spacer block size from your hitch with the closest available size: - Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick # RP3022 - Replacement Spacer Block for Trailer Hitches - 3" Long x 1-1/2" Wide x 3/8" Thick # 01077-011 - Replacement Spacer Block for Trailer Hitches - 2" Long x 1" Wide x 7/16" Thick # 1080-012
    view full answer...
  • Square Block Spacer, Conical Tooth Washer, Hex Nut and Carriage Bolt For Draw-Tite Receiver 75905
    We do not have the 1/2”-13 x 1-3/4” GR8 Carriage Bolt RP-01266-007 that you are needing. You will be able to source this part from a local hardware shop as it is a common size. You will then be able to use that with the Trailer Hitch Spacer Block # RP3022, Conical Toothed Washer # 01292-008, and Hex Nut # 55178 that you have already located to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75095 on your 2000 Lexus LX 470.
    view full answer...
  • Removing a Broken Weld Nut from Inside of Vehicle Frame
    There are a couple things you can do to remove your current weld nut. One is using a drill bit to expand the hole slightly. Because of your limited access, I would use a bolt leader like # 80101-1 to fishwire bolts through the frame of your vehicle. Since you have broken weld nuts, you will have to use different hardware to complete installation. With that said, you will need spacer blocks # RP3022, 1/2 inch carriage bolts, Conical tooth washers # 01292-008 (tooth side facing towards the...
    view full answer...
  • How to Install a Trailer Hitch on a 2005 Honda Pilot with 2 Broken Weldnuts in the Frame
    When using replacement hardware kit # RHK you would get the same hardware that originally came with the kit (some specialty pieces may not be included). Since you have broken weldnuts the only thing you can do is use a block and carriage bolt, drop them down through the frame using the fishwire technique and then use a nut to secure the hitch to that bolt. This is assuming you do not want to go through the trouble or expense of having new weldnuts professionally installed in the frame....
    view full answer...
  • Replacement Spacer Blocks and Bolt Leaders for a Draw-Tite Hitch on a 2010 Subaru Forester
    Replacement spacer block # RP3022 is the exact block used in many different trailer hitch installations. Its grade isn't ever specified but hitch hardware is always at least grade 5 and in some cases there is a grade 8 used. It is not stainless steel. The RP3022 is just the block with no other parts included. It looks like there are 2 bolt sizes used to install the Draw-Tite hitches on the 2010 Subaru Forester, # 80103-1 for 7/16 inch bolts and # 80101-1 for 1/2 inch bolts. You would need...
    view full answer...
  • Need Spacer Block to Install Used Trailer Hitch on 2008 Ford Edge
    We don't have the exact spacer block that would've been included with the # C13067 hitch but the # RP3022 comes very close. The block is a little narrower, and the hole is centered rather than being on one end. This means that the block may try to spin once the bolt is being tightened. If this happens, use an impact wrench. The impact wrench will spin fast enough to prevent the block from spinning. It might take a minute or so, but the bolt will tighten. You'd also need a few bolt leaders,...
    view full answer...
  • Replacement Trailer Hitch Mounting Hardware For 1986 Chevrolet G20 Van
    I have an option for you, but the spacer block used for your 1986 Chevy G20 Van measures 1/4" x 1" x 2-1/2" and the closest option we have that is not sold as a kit is the Trailer Hitch Spacer Block # RP3022 which measures 3" Long x 1" Wide x 1/4" Thick and may not work in the frame without modification. Instead I recommend find which brand and model the trailer hitch receiver you are installing on your van is, and using Replacement Hardware Kit # RHK. You will need to enter the model...
    view full answer...
  • Replacement Hardware for a Curt C13397 Hitch
    I have a solution for you but the CM-SP2 spacers are not available for individual sale. However, there is a complete set of replacement hardware available for the Curt Trailer Hitch item # C11254. This complete set will allow you to install your hitch on your 2016 Hyundai Veloster and you won't have to piece it out or worry about using the incorrect/unapproved hardware and voiding your warranty. You will want the Replacement Hardware Kit for Trailer Hitches item # RHK. Just go to the right...
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Kathleen M
Video Edited:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.