To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Features:
Specs:
The low-profile, aerodynamic Rhino-Rack ROC25 roof rack lets you carry gear and accessories on your vehicle's roof quietly and with little wind drag. It's designed for installation on a naked roof (a roof without factory raised side rails, flush rails, fixed mounting points, tracks, or rain gutters). The rack's Vortex Aero crossbar has built-in rubber strips that disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. This bar blends seamlessly with the support legs to provide a from-the-factory look, and it is custom cut to your specific vehicle so it requires no adjustment during installation. The legs also include built-in locks that protect your gear and the rack from theft.
The rubberized Vortex strips in the top channel of the crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbar cuts through the air with minimal drag - even at highway speeds.
The ROC25 roof rack has a flush-mount design so the crossbar terminates at the legs with no overhang. This provides the rack with a seamless, from-the-factory look, and it also helps to improve aerodynamics by reducing drag and wind noise.
The Vortex Aero crossbar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding a significant amount of weight. And the aluminum bar won't rust so you can leave it on your roof year-round.
The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight.
The roof rack arrives at your doorstep almost completely assembled. The crossbar is already mounted into the nylon legs. And the bar is pre-cut to match the width of your vehicle's roof, so you won't need to waste any time centering it. The few remaining assembly steps are straightforward and require only the vehicle-specific fit kit.
The vehicle-specific fit kit includes pads and clamps specifically designed to fit the contours of your roof. To install, simply attach the pivoting plates and rubberized pads to the bottom of each leg. Then secure the legs to your vehicle with the metal clamps. Decals inside the legs and a diagram in the instructions help you to orient the crossbar on your roof.
Once the crossbar is properly positioned, use the included Allen key to tighten it in place. The Allen key is designed to serve as a simple torque wrench. The curve in the blue plastic handle straightens when you've applied enough torque to each bolt.
The crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channel come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bar, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on it.
Locking covers on each support leg let you secure accessories mounted in the crossbar top channel. These sturdy nylon covers give the rack a finished look and also help secure the rack to your roof. The cover locks are keyed alike, so a single key opens all locks.
Average Customer Rating: 4.7 out of 5 stars (1950 Customer Reviews)
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.Great look, durable. I accidentally drove under an airport height guage with my SUP attachments. The rear bar was pulled off the truck, but received no damage. Reinstalled, back to work!
Roof rack cross bars look great on my 2018 F-150 crew cab. Instructions are a bit confusing. However, still an easy install. Note: Instructions refer to a RL, RR, FL and FR rubber bracket pad. Kit included two of each RL and RR. Same used on front and rear bar. Also, front bar is the one that is slightly shorter. Front requires a bit more persuasion with the clamps to pull it into the roof crevices. Rear drops straight in. So far, so good. Ready to haul two kayaks. Also, great customer service from etrailer. I questioned front fit and they verified it was correct parts.
I just received the Rhino-Rack ROC25 roof rack system. I paid for express shipping and it arrived the next day. Went on my 2019 Ford F150 SuperCrew rather easily and took about 30 minutes to install. I will be carrying two kayaks this weekend on an 8 hour road trip so I will do a follow up review after the trip.
Excellent product and the customer service and their help was AWESOME. It was so nice to actually talk to a live person on the phone to help with my order. My order was shipped complete in hours. Delivery to my address was actually day earlier then expected. The product in my opinion was super and the assembly and installation instructions were so easy to understand.
Thank you James for your assistance with my
order.
Seems well made, attaches firmly. Wish the black mounting screws were about 1/4" longer. Would have made installation a lot easier. It's a tight fit on my F-150 Raptor but that's a good thing.
I dont like how the rubber inserts are not long enough to span the crossbar
I haven’t had the chance to install my rack since receiving it yesterday. But no worries! I have ordered from trailer several times over the years and I have never been disappointed. They are extremely professional and deliver when promised. Thanks!
I don't really know what I am doing when it comes to mounting my gear on top of my truck but I just went with what I had. The Rhino Rack dual bars and Lockrack made it simple and very secure while hailing my camper and other items stored in my truck bed. It went just as I planned. Both my wife's SUP+ and my kayak traveled secure and out of the way. Looking for many more trips in our retirement.
Great product, they look very clean on my new F150
Review from a similar Vortex Aero in Roof Rack
This review is for the Rhino Rack Vortex Aero Aluminum-Silver crossbars and
associated legs and custom fit kit (RRVA137s-2, DK284, RRRLKVA) necessary for a naked roof installation on a 2018 Honda CR-V. Just enter the model and year of your vehicle and etrailers website will tell you exactly what additional items are necessary to complete the install. etrailers installation instructions and videos are very helpful. The installation document provided is for more than one vehicle and for more than one style rack, so take your time to understand witch measurements apply to your installation and refer to the installation video if necessary. ON that note: The measurements given for front rack did not fit as nicely on the roof as the rear rack, I adjusted the the front rack measurements slightly. I would suggest trial fitting on your vehicle before cutting the metric rulers to final length. Stick On tags are supplied to indicate front, rear and the location to install on your vehicle. Once the rails are adjusted and tagged you can remove and reinstall the racks very quickly. Korren was very helpful in keeping me informed as to availability of items in stock and email shipping tracking. I am very satisfied with etrailers customer service and happy with the appearance and functionality of the Rhino racks.
Review from a similar Vortex Aero in Roof Rack
I give all 5 stars for the product and service, but...I prefer the parts to be all in one carboard, also I was a little panicking looking for blue plastic key...It was inside of cross-bar ??not falling out with strips. Anyway,
I"m owner of Honda cr-v 2022 with bare roof ,and I just installed the rack. Was it simple enough? Yes,so I can share this:
First, rubber pads are all the same, and after placements to plastic legs should be placed with arrow*out*-that is it(a lot of info regarding vertical parts, that they are all different)??
Second, on other hand, in video we informed that clamps are same -they are not. Bigger "hooks" are for rear bar, smaller ones-for the front one.
Third, do not expect precision in rubber pads position(especially on rear bar)regarding plastic rail strips on bare roof.it is not achievable, just try to make same look on both sides.
I was worried about rain and water gets inside. Well, let us see.
What I plan to care on rack? Just a small 6ft step ladder. Believe me or no CR-V is my business vehicle ,and ladder carry was the goal of rack purchase. And only question I have if I can get to underground parking with no problems to cross the front entries usually limited with 6 ft in heights I will find out soon, but rack height plus ladder on it makes me worry.??The review will be update soon. regards.
Review from a similar Vortex Aero in Roof Rack
I purchased the complete 2500 Series system which included the crossbars, legs and fit kit for my 2018 Honda Fit so I could transport my kayak.. They were well packaged and their quality is quite evident. I did struggle a little following the assembly instructions but with some patience and watching a video it went well. Two items to be aware of. The front and rear leg clamps are of different lengths with the longer clamps going on the rear crossbar. The other issue was positioning the crossbars. After following the measurements for attaching the legs to the crossbars it was quite clear that the measurement for the rear crossbar was wrong. Placing the legs as instructed didn't allow the rear crossbars to be the 29 17/32 inches from the front crossbar but required me to move it back to 31 1/2 inches. There is a very faint whistle while driving around 30 to 35 mph but it's not annoying. I was so pleased with the fit and finish I went ahead and purchased the Rhino Rack S-loader to make it easier for me to lift my kayak onto the crossbars. I would definitely recommend both items.
Review from a similar Vortex Aero in Roof Rack
At first I didn’t know how to get the end pieces off because I thought it was locked and didn’t know where the key was. After pulling one of the ends pieces off, I saw that the blue key was inside the crossbar next to the measuring strips. Took me a minute but figured that part out, but the instructions were easy to follow. Can’t wait to test it out on my Kayaks! I have this installed on my Toyota Corolla LE 2013.
Review from a similar Vortex Aero in Roof Rack
This roof rack works great! At first I was skeptical about putting a rack on my IS250, but it couldn't have turned out better. Paired with the Yakima Highroad, I can easily transport my bikes around without worrying about anything coming loose while driving. The installation instructions for the legs and bars are pretty straightforward. Takes about 30-45 minutes total to install.
Review from a similar Vortex Aero in Roof Rack
I posted a detailed review with photos in my fit kit review by Anthony. If your thinking of getting a rack system this is the one to get and etrailer is the place to get it. This is a fabulous design. Strong and aerodynamic.
Review from a similar Vortex Aero in Roof Rack
I purchased the Rhino legs, cross bars and J-style kaya carriers together and could not be more pleased with the combination. The system was installed in an evening and used the next day. Assembly and installation was easy. The most difficult part was getting an even extension from the legs on both sides of the vehicle. I put a vortex strip with the ruler in each side to adjust and then tightened the screws. This set the back part of the leg in place which made installing the strips on the bottom easy as well. With strips filling all the gaps in the cross bar there is no wind noise at all.
Review from a similar Vortex Aero in Roof Rack
Great Roof Rack! It is super quiet when driving down the road even when going 75+ mph. Exceeded all my expectations. I paired mine with the Rhino Rack Hybrid Bike Carrier (RBC050). I’m able to fully open my hatchback (2018 Honda Civic 5dr) and it looks great as well.
Review from a similar Vortex Aero in Roof Rack
Exactly what I needed to replace the factory cross bars to make it easier to take off my roof top tent. Easy to install and secured nicely to the factory rails.
Review from a similar Vortex Aero in Roof Rack
Just what I was looking for for my 2021 MB Metris Cargo Van with Raised Rails, for hauling a 14-foot SUP. I wanted as low profile as possible and the Rhino Rack SX Series Legs and Aero Crossbars looked best. Relatively easy to set up.
Review from a similar Vortex Aero in Roof Rack
Very straight forward to install. Took about a half hour in total. No whistling whatsoever. They look awesome on my 2016 Ford Explorer Sport! Especially with my running boards and tires...
Waiting on my Rhino basket to get here to install that next!
Review from a similar Vortex Aero in Roof Rack
Overall unimpressed. Item took nearly a month to arrive from eTrailer despite being in-stock and an estimated delivery time of two days at checkout. The rack looks good but the leg locking bars are made of plastic, not sure why for the price. Not enough hardware was supplied to install following the instructions. Instructions show split lock washers on each bolt. Had to purchase additional split lock washers. Not impressed with the fact that I now need to keep up with 3 specialty tools to service/remove this rack that is supposed to be quick release. 1 key to lock the bases, 1 key to remove the bar end caps and a 5mm safety post Allen which is a stupid tool anyway. The hardware should be standard Allen or torx not safety. The tube end caps should be able to be removed with a flat head or normal tool and not a proprietary key. This would eliminate two superfluous tools. Overall I would not buy this rack again, I would go with a different system.
Review from a similar Vortex Aero in Roof Rack
I wouldn't buy these bars again. Starting with the good, they work as a roof rack and have allowed me to transport my kayak. So that's been great! That said, I would have spent more to get a different kind of rack. These have a serious design flaw. They're hollow tubes with an open slit down the middle. They give you a rubber strip to plug up the hole as best you can, then you put caps on either side of the bars. The bars basically act as two giant clarinets on top of your car. No one can stand the whistling/squealing when they drive in my car. They ask me to take the bars down when they drive with me. I thought this was normal for temporary racks until I was in the car with a friend who had different temp racks and didn't hear a thing.
Review from a similar Vortex Aero in Roof Rack
The cross bars assembled easily and with some assistance mounted to the car perfectly. I just got them on tonight and am going to be doing a bit of driving tomorrow and will report back with any noise issues. I do not expect any issues. I have purchased a few things for the same vehicle from etrailer and have been pleased all around with each.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.