Heat Shield for Rock Tamers Mud Flaps - Heavy Duty - Stainless Steel - Qty 1

Ask the Experts about this Rock Tamers Accessories and Parts

Heat Shield For Use ...

Will Rock Tamers Mud...

How to Prevent Exhau...

Best Way to Protect ...

Fit of Rock Tamers E...

Recommended Rock Tam...

• Heat Shield For Use with Rock Tamer Mud Flap System
  Rock Tamers has a heat shield specifically for their mud flaps as the part # RT76FR which is the kit you'd want since this is the mud flap system you have. There's no reason the Access one you mentioned couldn't be used but the gap the Rock Tamers kit creates between it and the flap will do a much better job preventing heat transfer.
  view full answer...
  
• Will Rock Tamers Mudflap Heat Shield Protect Flaps from Melting
  The angle of the arms that hold the flaps of the Rock Tamers Heavy-Duty, Adjustable Mud Flap System # ERT00108 are adjustable so that you can add distance between the tail pipe and them as needed. If you install the heat shield part # RT76FR that you referenced though you will not have to worry at all about the flaps melting. The metal of this insulates the flaps from getting hot enough to melt even with diesel engines that have very hot exhaust.
  view full answer...
  
• Rock Tamer Mud Flap and Heat Shield Recommendation for 2017 Chevy Silverado 2500HD
  We have a heat shield # RT76FR for applications like your 2017 Chevy Silverado 2500 where the exhaust points right at the flap of the part # ERT00108. This would be your ideal solution and would work well.
  view full answer...
• Do I Need To Use Heat Shield With My Rock Tamers?
  I suggest using heat shields # RT76FR with the rock tamers # ERT00108 unless you have an aftermarket tip on your exhaust that makes a complete 90 behind the tire.
  view full answer...
• How to Prevent Exhaust from Melting Rock Tamers Mud Flap
  The heat shield part # RT76FR that you referenced was designed to prevent the type of damage you have on your Rock Tamers mud flap so this would be best solution. Other option is to have a turn down welded to your exhaust tip so that it is directed away from the flap. For a replacement mud flap you'd then want the part # ERTO22.
  view full answer...
  
• Best Way to Protect Trailer From Rock Damage When Towing With Motorhome
  There are screens for flat towing set ups that attach to a tow bar, but for traditional towing on a trailer the best option are mud flaps/rock guards, the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches # ERT00108. These are large guards that measure 24-1/4" long x 23-7/8" wide x 3/8" thick each, and the width can be adjusted to measure anywhere between 67-1/4" to 96-3/4" from outside to outside. If your exhaust is anywhere close, you can also add the Heat Shield for...
  view full answer...
  
• Picking Between Heat Shield and Grille Outlets for Rock Tamers Mud Flaps
  If the exhaust pipes are straight back and very close to the Rock Tamers mud flaps part # ERT00108 I'd recommend the grilles part # ERT200 but if they are angled or there's a decent distance the shield # RT76FR is the way to go.
  view full answer...
• Solution For Installing Rock Tamers Mud Flaps Close To Exhaust On 2020 GMC Sierra
  When installing Rock Tamer Mud Flaps, there is not an exact distance that it needs to be form the exhaust. If the exhaust on your truck is routed straight back then you will want to install Exhaust Outlets # ERT200 so that the exhaust is routed through the Rock Tamer Mud Flaps # ERT00108. If the exhaust is not extremely close or is not routed straight back, then the best route is to install Heat Shield Stainless Steel - Qty 1 # RT76FR on the exhaust side. This way the mud flaps will not...
  view full answer...
• Fit of Rock Tamers ERT00108 Hitch Mounted Mud Flaps on 2011 Toyota Sequoia
  The Rock Tamers # ERT00108 is width adjustable from 67-1/4 to 96-3/4 inches wide. Since the wheel track of your Sequoia is 69 inches at the rear, the # ERT00108 would fit the vehicle. Whether you'll need the # RT76FR heat shield or the # ERT200 outlets will depend on how and where your exhaust exits the rear of the vehicle. The shields are sold individually, the outlets are sold in pairs. If the exhaust outlet will be within a foot of the mud flaps, I'd recommend getting the heat shields...
  view full answer...
  
• Recommended Rock Tamer Mud Flaps for a 2020 Chevy Silverado 2500
  The correct Rock Tamer Mud Flaps for a 2020 Chevrolet Silverado 2500 is part # ERT00108 for 2" hitch receivers or part # ERT00110 for 2-1/2" hitch receivers. If you don't know what size trailer hitch receiver you have, just measure the inside opening to see if you get 2" or 2-1/2". Please note, you will need to use a ball mount with a shank long enough for the clamp on the Rock Tamer Mud Flaps to attach. This will not be an issue for most ball mounts but the Weigh Safe 2-Ball Mount w/ Built-In...
  view full answer...
  

Do you have a question about this Accessories and Part?