These channel-mount eyebolts provide the perfect anchor point for a ratcheting strap or other tie-down accessory on your Rhino-Rack Aero/Sportz roof-rack crossbars. The eyebolts mount into the built-in C-channels of your crossbars.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Rhino rack load stops for Rhino rack arrow bars, part number S602. These load stops are going to be great for securing down your cargo to your Rhino rack roof rack or another other roof rack that accepts channel accessories. As you can see here, we're using a ladder, but will work out great for lumber or any other elongated loads. They come in a pair, and they're five inches tall. They're constructed out of a glass reinforced nylon and they feature a limited lifetime warranty. Now that we've gone over the features, I'll go ahead and show you how easy this is to get installed. First thing we can do is go ahead and remove our end cap, and then we can remove our rubber stripping.
Ordinarily, you can trim your rubber strips to fit around your stops, but for demonstration purposes, we're just going to go ahead and leave those out. We'll slide it on like so, then we'll move on to the rest of our hardware. First thing we can take is our plastic plate here, and then our t-bolt. We're going to slide that underneath. Then we'll slide it into the channel here, all the way to our stop.
Then we'll take our flat washer and our lock nut and get that started. I've gone ahead and repeated the same process for the other side. Before we tighten them down, we can go ahead and load up some cargo. If you're going to be carrying the same item every time, like a ladder, then we only have to tighten down once. With the ladder in place, we can go ahead and butt our stopper up against it and tighten it down, and then repeat the same process for the other side. You will have to provide your own tool to tighten it down.
It's just a 10 millimeter socket. If you'd like to, for the foot crossbar, you could pick up some additional load stops, or you could do like we're doing and use the Rhino rack tie down I-nuts, part number S604. This is just going to provide us with a secure point to run some straps through. You'll of course want to be sure and secure your cargo down. We're just using some bungee cords.
You could pick up a twelve piece set with part number 9008600. That's going to complete our look at the Rhino rack load stops for Rhino rack arrow bars, part number S602.
Average Customer Rating: 4.9 out of 5 stars (36 Customer Reviews)
These channel-mount eyebolts provide the perfect anchor point for a ratcheting strap or other tie-down accessory on your Rhino-Rack Aero/Sportz roof-rack crossbars. The eyebolts mount into the built-in C-channels of your crossbars.Provides a sturdy tie down point. I use in my THULE AEROBAR’s. Good product..
Very solid and easy to install. To get the eye bolt exactly perpendicular to the bars I did have to add a second heavy-duty washer, though.
Excellent way to tie down canoes and ka yaks.
Just what I was looking for for my tracks to tie down my kayak and other stuff!!
Quick shipment. Good product. Fit my rails on my Jeep Wrangler so that I had tie down points for my kayaks.
Great product and speedy service. Parts were easy to install and fit like a glove.
The right place for the part! I was hesitant to purchase the eyebolts because I had done so from another vendor and they did not fit. The dimensions and reviews on the site made it an easy decision. If you have Ormac Cross Bars YES they will fit. Well pleased with my choice.
Spray-painted them with a hammered finish and they are a perfect fit.
Used on a Thule aerobar C-Track on a 3rd generation Subaru Forester. Perfect fit, took just a few seconds to install and tighten. Well made and polished, no rough edges to fray cords or cables.
My review is not really as much about the product as the service. Originally I ordered before looking at the etrailer reviews and saw mixed when I did. Ordering through etrailer has been a very good experience for me. Almost everything has been as expected. There was a slight compatibility problem with the eyelets and cross bars and the staff fixed it promptly.
Received the full Rhino Rack kit with Vortex Bars to go over my F150 crew cab short bed with Retrax Pro XR retractable Tonneau cover. Took about 20' to install and have the full kit working first time out of the box. Great service delivery, everything included in one shipment! The 71" bar size gave 3.75" on either side of the towers and still kept the end of the rails within the overall edges of the truck line.
Thanks guys!
Rhino Rack was exactly what I was looking for. It was easy to install and rides quiet, supporting my kyak, ladder, lumber or anything else you might need a roof rack for. Another great benefit was the price compared to other manufacturers.
These are perfect for my application on the Rhino rack I purchased. Can’t be simpler.
Excellent heavy duty looking eyebolts using To transport items.
Would recommend them.
Thank you,
I have the Heavy Duty Cross Bar by Rhino and these bolts didn't fit into the track of the cross arm.
Thy did fit into the track that the brackets fit into. And that way they do not interfere with anything onthe flat of the rack itself.
I also bought star washers so they won't back out.
Great quality and super fast shipping
does exactly the job I wanted it for
as usual excellent service from e Trailer
Thanks guys!
Glad they were available. I could not find them on other websites. Easy to mount on bar.
Great product. I actually need to get more for my next project.
Good product and fast delivery
Exactly what I needed.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.