bing tracking image
  1. RV and Camper Hitch
  2. Swagman
  3. Bumper Mount Hitch
  4. 4 x 4 Inch Bumper
  5. 4-1/2 x 4-1/2 Inch Bumper
  6. 4-1/4 x 4-1/4 Inch Bumper
RV Bumper 2" Trailer Hitch Receiver - Clamp-On

RV Bumper 2" Trailer Hitch Receiver - Clamp-On

Item # S64025
Our Price: $62.34
You Save: 19%
RV and Camper Hitch
This item qualifies for Free Shipping
Shipping Weight: 9 lbs
In Stock
Swagman Bolt-On RV and Camper Hitch - S64025
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers. Great Prices for the best rv and camper hitch from Swagman. RV Bumper 2" Trailer Hitch Receiver - Clamp-On part number S64025 can be ordered online at or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (119)
  • Q & A (0)
  • Photos
  • Why etrailer?

Swagman RV and Camper Hitch - S64025

  • Bumper Mount Hitch
  • 4 x 4 Inch Bumper
  • 4-1/2 x 4-1/2 Inch Bumper
  • 4-1/4 x 4-1/4 Inch Bumper
  • Bolt-On
  • 200 lbs TW
  • 2 Inch Hitch
  • Swagman

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.


  • 2" Hitch receiver opening to accommodate hitch accessories
  • Solid steel construction
  • Powder coated to resist corrosion
  • For use with up to a 4-bike non-folding, standard bike rack
  • Not to be used for towing or with cargo carriers
  • For use above the bumper only
  • Never exceed the bumper's stated capacities
  • Attaches to bumper using 4" bolts (included)


  • Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers
    • Not for use on aluminum or spot-welded bumpers
  • Load capacity: 200 lbs
  • Distance from the center of hitch pin hole to end of receiver: 3"
  • Mounting plate measures 6" x 6"

Approved for use on RVs, motor homes, and travel trailers

Note: Not to be used with an adapter or extender.


64025 RV Bumper 2" Trailer Hitch Receiver - Clamp-On

Customer Satisfaction Score:

Customer Reviews

RV Bumper 2" Trailer Hitch Receiver - Clamp-On - S64025

Average Customer Rating:  4.8 out of 5 stars   (119 Customer Reviews)

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.


Hold up well after 160 miles camping trip. Mounted at 4” rear bumper of my camping trailer to accomodate 2 bike rack. I only carry 1 bike for the trip. Solid and well secured using provision screw that you need to tightened once bike rack is mounted to avoid movement when driving.


Works great on travel trailer tube bumper. As cheap to buy rather than making it


Had it for a year now it’s holding up perfectly, still looks like new. I use it for my bike rack and it works great.


Very pleased with this product it's robust and solid, the bolts and lock nuts are high quality. Ordering and shipping were easy and fast. The part fit perfectly I used some gasket material to protect the bumper, would have liked to have the torque specs on the nuts. I use a Thule bicycle rack and this hitch allows me to bring along the bikes on my 5th wheel.


I'm using this to mount a pretty large and heavy 4-bike rack to the rear bumper of my camper. This thing is stout. It has nylock nuts so I don't have to worry about the nuts backing off. Also has a threaded bolt hold in the side w/ bolt so that you can snug up whatever you put in the receiver (bike rack, etc.) to keep it from swaying. I really like that feature.

The receiver itself is great. I still have it on my camper. My campers bumper on the other hand was not up to the task of stress that a fully loaded 4-bike rack put on it. The bumper could probably handle 1 or 2 bikes just fine but the rack I have puts too large of a moment on the thin wall square tube bumper.
Kevin - 06/18/2021


Great quality, heavy duty plate steel used in fabrication.
Excellent bolts and nylon lock washers.
Perfect or our e bike rack on our class a .


Luck was on your side for a nice piece of furniture for my trailer. The package arrived ok but when I went to open it -- I had no trouble. The shipping expert had forgotten to tape the box on the lid!!! Thankfully because the connector was tightly packed, it did not fall our and break someones foot or get lost and thrown in the trash.

Like it is supppose to!
JOHN W - 06/11/2021


Exactly what I wanted!


Opened the box and was immediately impressed by the construction quality of this bike rack receiver. Easily installed on the bumper of our trailer and again, I was very impressed with the sturdy bolts, back plate and receiver. Too bad Swagman doesn't make one of these for my inferior spare tire holder.

This is a great product, period! Perfect match for my 4 trailer bumper and my bike rack. But more importantly is the quality service I receive from etrailer. They are a great source for everything you could possibly need for your trailer or RV. Ive ordered several items from them and the quality is always 5 Star! Cannot say enough good things about their customer service. They are 5 Star from top to bottom. They set the standard for customer service and products.
Michael J - 04/23/2015


The RV Bumper Hitch Receiver is of great quality and is easily installed. I used it to mount to my trailer steel bumper so I can carry my bikes which mount on a receiver type rack.

All three of these products have held up well and performed well. Thanks.
John M - 08/16/2016


Exactly what I need!


It's heavy duty construction allows me to use it on my travel camper's bumper to attached my class 3 bike rack, knowing the bike rack is security attached to the camper.


Swagman hitch fits securely on our 4” trailer bumper. Our standard bike rack works fine on the hitch. I have had several campers ask me where I got the bumper hitch and have recommended etrailer for their solid customer service


The Swagman RV Bumper 2" Trailer Hitch receiver is a very solid hitch receiver especially for the Swagman Dispatch 2 Bike Platform Rack - 2". Along with the threaded pin from the bike rack and the set bolt on this receiver there is no play or movement in the receiver tube. My bumper is 4" square and will require spacers on the back side to fully secure, minor issue.


Etrailer service is always top notch with fast shipping. They are my go-to whenever I need parts or service items on my RV's trailers or truck.
About this hitch. Easy to install & does the job. Needed it to carry bikes on the back of our travel trailer. Due to ground clearance as you leave some gas stations, I would not mount it below the bumper you may drag the bikes on the ground. In fact they say not to bolt it underneath the bumper due to the limits of the bolt strength. So for what it is intended for, it's a great solution.


Purchased to fit on my RV bumper for bike rack/cargo carrier. Installation is as basic as you can get. I was surprised that the bolts were grade 8, but there were no washers. See no reason why it won't work very well.


RV Bumper Hitch attachment: Works perfect! I use two, one on each end of the bumper to attach flag pole holders. Have already had comments about the product and the professionalism of the staff and the quick mailing was impressive!
Installation was simply bolting the product onto the bumper, how easy is that!!??
No more use of U-Bolts and or having to weld pipe onto the RV in order to flag my NASCAR flags at the track(s).

Do not be doubtful of this product!! Get yourself one or two!! Thanks etrailer!!


I ordered the Swagman RV hitch s64025. Upon receiving the hitch early Wednesday afternoon, I opened the box and noticed that the bottom plate was missing. I immediately called etrailer and spoke with Crystal. She was sympathetic and totally understanding of my situation. She immediately placed an order for a replacement. I received the replacement hitch early Friday afternoon. I'm just waiting for instructions to return the old hitch. The original box may have been opened somewhere during shipment--I can't be sure. However, I would not hesitate ordering anything from etrailer. I ordered other items as well and they all arrived on-time and in good condition. A big Thank you Crystal, and I would be remiss if I didn't thank Reesa, and Tiffany for their help in placing other orders. This is what I call a Five-Star customer oriented company--nothing short of OUTSTANDING!!!


I installed this item to mount the Prorack 2 bike rack on the bumper of our new trailer so that we could conveniently carry 2 lounge chairs. It was nicely fabricated and finished, and installed easily with the hardware included. I'd have given it an "excellent" rating, but I'm not sure that there won't be some future corrosion issues with the bolts provided due to the type of surface treatment. However - with this stated - I'd definitely consider purchasing this item again to meet a similar need in the future.


Great vendor, great product.
We have
6 trailers at our home; 2 boat, 1 tandem utility, 3 single axle utility that need to be moved around frequently for space reasons.
Airports need to "push back" planes from their gates for which the "tugs" have hitches on their front bumpers. That arrangement allows greater steering control than if their hitches were mounted on the rear of the "tugs". So, I've mounted this wonderful hitch to the front bumper of my '86 Isuzu Trooper II 4-wheel drive which I use to position my trailers. Of course it's NOT safe for highway travel, but as a positioning aid, it is superb. Also; etrailer communications and speed of delivery cannot be improved. Don't change anything, etrailer.


This clamp on hitch receiver arrived in only a couple of days although I live in Southern Ontario Canada. The finish and welding on this product are excellent. I will use it for attaching a bike rack to the rear bumper of our new travel trailer. I purchased the bike rack some months ago from etrailer. That was also very good customer service experience.


Perfect for my new RV. I like the all black finish, bolts included, that goes well with the black bumper. It will be used for a two bike carrier and looks to be rugged enough, I'm sure it is, and time will tell. I think it will be great.


Good product, reasonable price, easy to find on etrailer. Just what was needed to add a bike rack on the rear bumper of our travel trailer. Just as advertised, works fine, seems strong enough - though time will tell. Arrived in good time, as predicted.


Just right to add a bike rack, not load rated to add a trailer.
Would prefer locking nuts, but easy to find at hardware store.


Everything was as advertised. Quality product, easy to install, works great. I used this to attach a Thule hitch mount bike carrier to the bumper of my camper.

Shipping was nearly immediate

Show More Reviews

See what our Experts say about this Swagman RV and Camper Hitch

  • Why Can't Folding Bike Racks be Used with the RV Bumper # S64025
    In order for a bike rack to be rated for the rougher ride associated with the back of an RV (like what the # S64025 would install on), it has to be reinforced appropriately and folding mechanisms are known for being a weak point on bike racks. So the reason for that requirement of the hitch is because of how the hitch will normally be used. If you have a folding bike rack currently most likely it is not rated for use behind an RV. Because of that I would recommend you go with one like...
    view full answer...
  • Hitch Options for a 1982 Dodge Rampage
    For your vehicle I believe your best option for installing a hitch would be to contact a qualified fabricator and have them custom fabricate a hitch. The hitch you referenced is more for RV bumpers that are 4 inch by 4 inch and would not be ideal for you, in fact it probably wouldn't work at all.
    view full answer...
    Image 1 for
  • Weight Capacity Of RV Bumper Mounted Hitch Receiver
    This Clamp-On RV Bumper Hitch Receiver, part # S64025, is constructed of solid steel and designed to fit 4 inch by 4 inch bumpers. Its load capacity is 200 lbs which should be plenty strong to hold two bikes and the weight of the bike carrier. You will want to check with the RV manufacturer to make sure you never exceed the bumper weight capacity on your RV. This receiver should not be used with aluminum or spot welded bumpers. It is not designed for cargo carriers or for towing. I have...
    view full answer...
  • Capacity of Clamp-On RV Bumper 2 Inch Trailer Hitch Receiver # S64025 with Anti-Rattle
    The limiting factor is not the capacity of RV bumper hitch # S64025. The main issue is the capacity of the bumper. You will need to contact the RV manufacturer to find out the specifications for your bumper. Also, you will have to be certain you have the right bumper, as this hitch is designed exclusively for 4 inch by 4 inch continuous-welded steel bumpers. This adapter is not compatible with aluminum or spot-welded steel bumpers. There is no drilling required, as the hitch slips over...
    view full answer...
  • Hitch Recommendation for a 2016 Keystone Passport 217EXP
    The most common recommendation we make for travel trailers like yours is a multi-fit hitch like the part # 13703. As long as your frame rails are between 22 and 72 inches apart this hitch would fit and work well for you. I attached an install video for you to check out for this hitch as well.
    view full answer...
  • Availability of RV Bumper Trailer Hitch Receiver and Bike Rack
    Any of our RV and motor home bike racks, see link, with a 2 inch shank will work with the RV Bumper 2 inch Trailer Hitch Receiver with Anti-Rattle - Clamp-On, part # S64025. Please be aware that the springs on a camper are very different than those on a vehicle, and the bikes will be jarred quite a bit. No matter which bike rack you choose, you will need to be sure to secure the bikes with bungees to prevent damage to the bikes, rack, or your camper.
    view full answer...
  • Carrying Bikes on Travel Trailer Using Swagman Universal RV Bumper Hitch
    If your trailer has a continuously welded steel square bumper of up to 4 inches wide then this hitch can be mounted to it as long as your bumper is rated for a hitch. For carrying bikes you will have to consult your RV dealer to find out the tongue weight rating for your trailers bumper. The Swagman RV Bumper Hitch you referred to is rated for up to 200 pounds but you can not exceed the weight rating for your bumper. Many of the bike racks state that they are not to be used behind travel...
    view full answer...
  • Recommendation for Making an RV Sewer Hose Carrier
    At this time we do not carry a sewer hose carrier for the back of an RV but I have a solution for you. You will need to make a run to your local home improvement store to assemble all the necessary parts. You can build one of these tubes fairly easily by using 4 inch diameter PVC tubing (go 5 inch or even 6 inch if you want to keep your hose ends on) and two residential sewer clean-out screw caps, found at any home improvement center. Cut to your desired length and mount using plastic...
    view full answer...
  • Recommended Bumper Mount Receiver for Travel Trailer
    As long as the bumper is not aluminum, and the seams on the bumper are continuously (not spot) welded, a bumper hitch like those you mentioned can be used. You will also need to ensure that the bumper is rated to handle the weight of the bikes plus the rack. Of the three, I would recommend the Curt # E-100 because of its higher capacity and tougher construction. You do not mention which bike rack you are planning on using. You will want to be sure to use a bike rack that is approved...
    view full answer...
  • Compatibility of Swagman Hitch-Mount Platform Type Bike Carrier with Bumper-Mounted RV Hitch
    Since your travel trailer's rear bumper is continuously welded this does suggest that it should have the capacity to allow use of a bumper-mounted hitch like the Swagman # S64025. The only way to be sure is to contact the trailer manufacturer with your trailer's VIN so they can confirm the bumper and frame can handle the combined rack/bike weight load you intend to place on it. Once you have confirmed hitch/bumper compatibility and that the hitch and bumper have a weight capacity adequate...
    view full answer...
    Image 1 for
  • Compatibility of the Swagman RV Bumper 2 Inch Trailer Hitch Receiver Used to Carry A 150 Generator
    The Swagman RV Bumper 2 Inch Trailer Hitch Receiver, # S64025, has a 200 lbs weight capacity and will mount to a 4 x 4 inch square bumper. However, you will needed to know the tongue weight capacity of your trailer's bumper before mounting the Swagman hitch and a generator. Typically, this style of bumper receiver hitch is used for lightweight hitch accessories like a bike rack or a point to mount a spare tire. Consult the trailer's owner's manual or contact the manufacturer to find...
    view full answer...
  • Using the Swagman 2 inch RV Bumper Trailer Hitch for a Scooter Carrier.
    In order to use a scooter carrier with the 4-inch bumper hitch, part # S64025, the entire load would need to be less than 200 pounds, including the weight of the carrier and scooter.
    view full answer...
  • Swagman RV Bumper Trailer Hitch Receiver Fit And Compatibility
    The RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 is designed for the standard 4 inch RV bumper, but it will fit 4 inch to 4.5 inch continuous welded steel bumpers. The mounting plate measures 6 x 6 inches. This hitch receiver is not to be used with adapters or extenders.
    view full answer...
  • What Is The Total Height of Swagman RV 2 Inch Trailer Hitch Receiver Above RV Bumper?
    The RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 It is right at 3 inches tall from the bottom of the top plate to the top of the receiver collar. It will fit and give you clearance so it will serve you well. The capacity of the hitch receiver will be limited by the bumper capacity or the 200 lb tongue weight capacity of the receiver.
    view full answer...
    Image 1 for
  • Could Swagman RV Bumper Mount with Hitch Opening Vertical for Carrying Flag
    There's no reason you couldn't mount the # S64025 in a vertical position to use it like you are wanting to.
    view full answer...
  • Can Bumper Mounted Trailer Hitch Be Used To Pull Tow Dolly Loaded With A Vehicle
    If you use a bumper hitch like part # S64025 on your RV, it needs to have a bumper that has a continuous weld and not just in two places on the frame. I recommend using a motor home trailer hitch like part # 82201. This bolts or welds to the frame of your RV and provides a 2 inch receiver opening at the back of your RV. This hitch adjusts from 47 to 71 inches wide and has a gross towing capacity of 3,500-lbs. Since you plan on doing some towing you might be interested in etrailer ball...
    view full answer...
  • Trailer Hitch Recommendation for a Camper Trailer
    The Swagman trailer hitch # S64025 us designed exclusively for 4 inch x 4 inch continuous-welded steel bumpers and is not compatible with aluminum or spot-welded steel bumpers. We do not have a bumper hitch that will fit a 3 inch square bumper but you may be able to install a frame mount hitch. The most versatile frame mount hitch is # 13703. It fits box frames, I-beam frames, and C-channel frames. It can be bolted on or welded on but welding should be done by a qualified professional....
    view full answer...
  • Is it Safe to Carry a Bike Rack and Bikes with Swagman Specialty Trailer Hitch, # S64025
    It is safe provided that the bumper and trailer are rated for this type of application. You will need to find out the weight capacity of the bumper and if there are any restrictions on what you can carry on it using the Swagman Specialty Trailer Hitch, # S64025. Another option would be to install a frame mounted trailer hitch to the trailer. I recommend the Adjustable Width Trailer Hitch, # 13703, because it fits frames from 22 to 72 inches wide, and box, I-beam, or C-channel frames. I...
    view full answer...
  • Trailer Hitch that Mounts to the Frame of a 5th Wheel Trailer
    You can put an RV trailer hitch on a 5th wheel trailer. For a frame mounted hitch the most versatile is the Curt hitch # 13703. This hitch fits frame frames from 22 to 72 inches wide (frame width is measured from the outside of one frame rail to the outside of the other frame rail). It can be used on box frames, I-Beam frames, and C-Channel frames. And it can be bolted or welded on. Welding should be performed by a professional welder. I have included a link to the installation instructions...
    view full answer...
  • Hitch Option Recommendation for Travel Trailer with Aluminum Bumper
    We do not have any hitches we can recommend that will fit around an aluminum RV bumper. Best option we'd have would be a multi-fit hitch like part # 13703 which fits frame widths of 22 to 72 inches and all frame styles.
    view full answer...
  • Bumper Mounted Trailer Hitch for RV That Mounts Underneath Bumper
    The only solution really is a new trailer hitch receiver because the Swagman RV Bumper 2" Trailer Hitch Receiver # S64025 is a clamp-on designed only to be mounted above the the bumper and doing otherwise compromises the safety and integrity of both the hitch and your RV. There are bumper mounted hitch receivers that will accommodate 2 inch bike racks, which is what the Swagman was designed to do. The Buyers Products RV Universal Receiver Hitch # 3371804060 has a 2" receiver and as you...
    view full answer...
    Image 1 for
  • Recommendation for a Bike Rack on a Cougar 302 Trailer with Slide Out Storage Bumper
    You will have to contact the manufacturer of your travel trailer to see if it is rated for weight carrying capacity. I would ask if it can carry a 3-4 bike rack either extended or retracted since there is likely less capacity when extended than when retracted. If the bumper is 4 to 4-1/2 inch continuous welded square steel construction and the manufacturer allows the addition of a bike rack to the bumper then you could use the Swagman 4 Bike Carrier RV Mounted Bike Rack, item # S80600...
    view full answer...
  • Do You Carry a Swagan Clamp-On or Bolt-On RV/Camper Bumper Hitch
    Yes, the RV Clamp-On Bumper Hitch is available by itself. It is part # S64025 and I have added a link to it below. Remember, your bumper needs to be a 4x4 inch continuous-weld steel bumper. It cannot be used on spot welded or aluminum camper bumpers.
    view full answer...
  • Trailer Hitch Recommendation for RV Bumper for Carrying Bike Rack
    Yes, we have the RV Bumper hitch from Swagman part # S64025 which is designed to fit 4 inch by 4 inch square RV bumpers and carry an RV approved bike rack like the Swagman Escapee # S64693 which would work well.
    view full answer...

< Previous
123. . .4

Do you have a question about this RV and Camper Hitch?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video Edited:
Jacob T
Employee Zach D
Video Edited:
Zach D
Employee Adele M
Updated by:
Adele M
Employee Matthew S
Updated by:
Matthew S
Employee Jenny M
Updated by:
Jenny M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.