Customers prefer these similar products
This 2-bike rack grips your bikes by the downtube, making it great for carrying bikes with fenders. It's also great for carrying e-bikes. Sliding wheel trays help prevent your bike's handlebars from bumping the saddles.
Features:
Specs:
The Freedom has cradles with ratchet straps that hold your bikes by the downtubes, top tubes, or seat posts. These cradles have a rubber lining that won't scratch or scuff your bike's paint. They also have grooves that accommodate brake lines and cables.
The cradles pivot and slide up and down the central mast. This allows the rack to grab your bike's tube at the perfect angle. Twist knobs secure the cradles in place.
The wheel cradles slide to accommodate bikes with different wheelbases. Each cradle has a ratcheting strap so you can secure your bikes' wheels. If you want to carry a fat bike, you can replace the rack's wheel trays with fat bike cradles (SA4419 - sold separately). Or, if you want to carry 2 recumbent bikes, you can replace the horizontal arm with a longer arm (SA4415B - sold separately) that accommodates recumbents with up to 57" wheelbases.
You can fold down the upright mast by pulling a lever at the base. This allows you to easily access your vehicle's rear cargo area, so you can leave the rack in your hitch without it interfering with your cargo hatch or backup camera. The compact design also lets you easily store the rack in your garage when it's not in use.
It installs with a threaded hitch pin that helps prevent rattling around in your vehicle's hitch receiver. An anti-rattle hitch lock (SA3022 - sold separately) helps deter theft of the rack. You can also thread a cable lock (SA981 - sold separately) through the hole in the base of the rack and through your bike frames to secure your bikes to the rack.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (162 Customer Reviews)
This 2-bike rack grips your bikes by the downtube, making it great for carrying bikes with fenders. It's also great for carrying e-bikes. Sliding wheel trays help prevent your bike's handlebars from bumping the saddles.
I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal.
We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.
Jenny N - 11/23/2021Perfect, works on my e-bikes even with 3-inch tires, just I have to use longer straps. Love it.
Fits the bike and truck perfectly! Very quick shipping. Easy assembly and installation.
Excellent product. Very easy to put together. Just bought 2 new ebikes. Because they have fenders this is the perfect carrier.
David - 01/17/2021This is a great, high capacity rack (120 lb!) for bikes with compatible frames. But it is a little fiddly to adjust to fit the bike, and it's not great for long-wheelbase MTBs. My Santa Cruz 5010 fits, but it's off center to the rear of the bike and the downtube strap is just barely long enough to get around the bulky carbon frame. My Specialized Roubaix road bike, my wife's Liv Sedona and my old Trek 930 all fit great. Since I originally bought the rack to carry the Trek and Liv, I can't complain.
Unlike some tray racks, this one will carry bikes that have fenders, since there are no top-of-wheel clamps. But also unlike those tray racks, the bike must have a down tube that fits in the center holder. Once it's in there, it's very solid.
We rented an RV for a vacation, and wanted to take our bikes. This rack is NOT RV-rated, but during COVID, I couldn't get an RV-rated rack in time for trip, so I put the 2" adapter on this and used it. The Trek and Liv combined are only about 70 lbs, well under the 120 lb rating, and this rack does not have a tip-up-or-down hinge, which seems to be where racks tend to break when used on RVs. We did 1800 miles, often on quite bumpy roads, in a 24-foot Class C motorhome, and the rack was dead solid and exhibited no signs of damage or metal fatigue.
Unlike some racks, this rack does not have a hinge so you can flip it up against the back of the vehicle while not in use (although the center post does fold down sideways against the main crossbar for storage). As noted above, that makes it stronger. It also makes it lighter. I install and remove the rack for every use, and it's easy to carry, much more so than my daughter's rack that does have the flip-up-or-down hinge and top-of-wheel clamps.
Although I have net transported bikes yet ( picking up 2 bikes later today), I do want to share that purchasing it thru etrailer.com was very easy and it shipped very fast to my home. The Sarris Freedom was extremely easy to put together. It took about 10 minutes, basicly 3 bolts. Its very sturdy yet light, not bulky. Looks easy to store in my garage when not in use. Straps and wheel holders appear to be very well built. Got it on sale and the price was very good. Looking forward to trying it out later when picking up 2 new bikes. I plan on transporting somewhat locally between 5 and 25 miles each way. Initial feeling its a very nice rack.
This product works very well for the type of bikes we got (Electra Townie men’s and woman’s). Not the best rack for the type of vehicle (2013 Jeep Wrangler). Unable to open back hatch to let dog out until the bikes are off the rack. First trip was 600 miles with bikes in tow and didn’t even know they were there. I love the fact that this is a American made product. I am happy with my purchase. Thanks to the support staff at etrailer it was a great experience
Appears very sturdy. Simple efficient design. Ebike requires some creative problem solving due to the large battery vs tube hold down of the carrier. The was acceptable to me for the price. My Non electric bike is perfect.
The Saris Freedom Bike Rack for 2 bikes was recommended to me from etrailer based on my question about needing a crossbar to haul my bike and my wifes. I did not need the cross bar and went ahead and ordered the Freedom. There was a very fast turnaround for shipping to me. i just installed it and took the two bikes for a test run. so far so good. the product seems very sturdy and didnt take very long to assemble.Thanks to etrailor i am very satisfied with the entire purchase!
Etrailers website was easy to use and the product choices were great. We found the exact product that we were looking for to accommodate our two folding "Bike Fridays". We will use the rack on the back of our Mazda CX-5 and on the front of our Ford F450 pu truck. Your service was outstanding shipping, tracking and delivery. The onsite videos were helpful. Thank you very much. Pics are attached.
My husband put it together with no problems. We love it! It’s built well and very sturdy. Love that it was made in the USA
Jennifer - 03/18/2022I use the Saris Freedom rack (along with the Curt stabilizing strap)regularly for transporting my 45 lb. e-bike. Solid product. Good value.
Pros: Light weight and easy, quick one-person install/Fits 1.25" hitch as well as 2"/Anti-rattle built in/Center mast and clamp design works well for bikes w/ fenders and for step-thru and mid-step bikes.
Cons (not so much "cons" as "considerations"): First loaded bike must be lifted over center mast so may be difficult depending on bike weight and user strength (This is the one potential deal-breaker so I suggest checking out one of the etrailer videos to see how this works and simulating the process with your bike before you choose.)/Takes a few minutes to position and lock the center clamp and wheel trays for a specific bike (This is a one-time process for each bike that helps ensure a really good grab and virtually eliminates movement, but if you're regularly transporting different bikes and having to frequently reconfigure the clamp and trays it may not work for you.)/No fold-up option so may not be suitable for parking or garaging in tight spots when installed or storing in limited space when off the vehicle. (Since I typically transport only one bike, I leave the "outside" wheel trays uninstalled, reducing overall length by 5" and preventing any damage.)
This bike rack was designed for two bikes.
I use it for one only fat tire e-bike as it is still within the weight restrictions.
It carries my bike well and I'm pleased with it's performance. My suggestion is to always be within the weight restrictions when deviating from recommended us.
Havent put my bike on this yet because its too cold to ride but we did put it together and its a sturdy well made e-bike rack ...customer service was also great !
Works well for my Electra Townie 7i with the stock Schwalbe Fat Frank tires. The carrier extended to nearly max width accommodates the long Townie-frame bike--and securely. The carrier is heavy (for me) to handle due to its solid construction as is the bicycle, too.
Arrived fine. Simple assembly instructions. Especially like that it's made in the USA
This bike rack isn’t made for a woman to use and the rod with the clamps doesn’t fold out, only forwards and back and is always in the way of putting the bike on. It’s not functional. I’m very unhappy. I am transporting my car to Florida and need it out is return it. This is the second bike rack I’ve been very unhappy with.
Tyler M - 03/09/2021I received my Freedom 2 rack yesterday. It took me about 10 minutes to assemble it with no issues at all. This morning, I put the rack on the back of my 2014 Ford Explorer, and began to load my bike. The rack attached easily to my 2" hitch receiver, and when I tightened the bolt, it was a very sturdy and stable fit. I made the adjustments required to mount my bike on the rack, and found that it traveled securely and very stable. My only issue with the Freedom 2 is the hold-down straps on the wheel and tube brackets. I think a better ratcheting system and a better qualitty strap would greatly enhance the unit. Otherwise, I'm very happy with the rack. My carbon fibre hybrid and my grandson's road bikes will be easily transported to wherever we want to ride!
Doug M - 06/10/2018This my 2nd Saris bike rack. This is my first platform hitch rack; it is so much easier to load the bikes and I have a much better rear view from the car. It was also easy to assemble. I highly recommend this bike rack.
Thanks so much for this great bike rack! I assembled it fairly easily, it was just as lightweight as I thought it would be, and my two ebikes fit perfectly on it! Plus, it looks great and I love knowing I bought an American made product from a company also in America!
Easy to install and remove
relatively light rack, grips bike well
locking straps could be a little easier to unlock
The Saris Freedom 2 Platform Rack fits my needs very nicely. It is lightweight, so it is easy to handle, and is plenty strong to hold 2 bikes. The platform format supports the bikes nicely and is convenient to load. etrailer has been very helpful and cooperative with getting me set up with this rack.
Mike M - 10/27/2017etrailer.com is without question, the best website I've ever seen when it comes to product description and installation instructions. The installation videos are incredible. Thanks to the ease and simplicity of the installation videos, I knew I would have absolutely no problem whatsoever doing the work myself...and I was right. You guys are a class act from the young lady who took my order over the phone to the speed of shipping. I've already referred a co-worker to your site...thank you!
Abowen - 05/05/2016Works as advertised. There’s a learning curve to wrestle with our 50 lb. ebikes.
Completely inadequate for my application (heavier-than average eBikes; within the weight specifications of this Saris Freedom rack). eTrailer customer service should have advised against this rack, and for one more suitable for the task. But eTrailer did not recommend a more suitable rack.
The rail from the hitch receiver to the rack is too long - on my installation, at least eight inches of wobbly lever could be removed and there would still be plenty of clearance between the rack and my vehicle bumper. That cartoonishly-long lever evokes the memory of Archimedes' long lever to move the world - in the case of this Saris Freedom rack, that long lever just makes the bikes and the rack wobble unacceptably. Of course, if the end-user modifies the rack in an attempt to do the design engineering job that was not done in Madison, WI, the lifetime warranty is voided.
Replaced this rack with a Thule Easyfold. Way more money, but it does the job because it was designed to do the job.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.