3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long

See what our Experts say about this Universal Group Trailer Leaf Spring Suspension

• Axle and Suspension Hanger Placement on Tandem Axle Trailer
  The placement of the axles is going to depend on the gross trailer weight. I have included a picture that shows how to determine where the center point should be between the axles. Placement of the hangers is going to require mocking up the hangers to determine where they are going to fit. But as a guide you can use the following as a starting point: Distance between front and center hangers and between center and rear hangers, approximately 29-1/2 inches (74.93 centimeters).
  view full answer...
  
• How to Determine Hanger and Axle Spacing Building a Trailer with 26 Inch Long Double-Eye Springs
  On a spring that is 26 inches eye to eye on center and a single axle trailer you will want the hangers to be up to 1/2 inch less than the spring length so 25-1/2 inches on center between the front and rear hangers. For the ideal axle position you can follow the formula in the picture I have included. It covers single or tandem axle set ups.
  view full answer...
  
• Replacement Trailer Leaf Spring that Measures 60cm Long x 50mm Wide
  I have linked our main page for trailer springs, which are offered in both double-eye and slipper types. Your 50mm width is close to the 2-inch width we offer but your 60cm length (23.6-inches) is not a match for the width. 2-inch wide springs are available in the following lengths: 26-1/8 Inch Long 26-5/8 Inch Long 29-1/2 Inch Long 30 Inch Long Please note that springs can become elongated after years of use but they do not become shorter. I suggest you re-measure your spring width...
  view full answer...
• Can a Curved Equalizer be Replaced with a Straight Equalizer
  Different trailer configurations require different equalizers. It all depends on the springs, axle spacing, hanger spacing, height needed and so on. In many cases if you want to change the equalizer to something with different measurements you would also have to replace other components such as the hangers and springs in order to keep everything in the right location for that specific trailer. I have included some links to our help articles on double-eye and slipper spring trailer suspension...
  view full answer...
• Replacing a Broken Leaf Spring on a 2007 Starcraft 2406 Pop Up Trailer
  When replacing a broken leaf spring on your trailer there are a few things to note. The most important part about a leaf spring being compatible with your trailer is that it is rated for at least the same weight capacity as your trailer axle. If it is rated lower you could overload it. A higher rated leaf spring would work but it would also make your trailer suspension stiff. Other than weight capacity you simply need to make sure that it has the correct width, is the same style, and has...
  view full answer...
• Leaf Spring Recommendation for 3,000 lb Axle on Cikira Travel Trailer
  The closest leaf spring option we have would be the spring part # SP-216275 which is a 3,500 lb axle leaf spring that is 23-1/8 inches long. You'll have to move you suspension hangers to accomodate the longer springs but this will work well for you.
  view full answer...
• What is Recommended Clearance between Trailer Axle and Frame
  The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.
  view full answer...
  
• Correct Replacement Leaf Spring for 2,800-lb Dexter Axle
  The distance between the spring eyes should be measured from the center of each eye. I've attached an image showing the correct locations to measure to obtain leaf spring measurements. However, from the given information, it sounds as though you have the correct replacement part with the 3-Leaf Double-Eye Spring # SP-216275. I've also attached an article on double-eye trailer suspension systems for you.
  view full answer...
  
• How to Get Correct Length Measurement of Trailer Leaf Springs
  I'm assuming that you're wondering how much the leaf springs flatten out over time. Usually it won't vary by more than 1/2 inch or so, but there's a sure way to get an accurate measurement. The best way to get an accurate length measurement for a leaf spring is to jack the trailer up so that the axle is hanging free. You can then get a center eye to center eye distance that'll be right on the money. By letting the axle hang, you'll be able to get a correct measurement.
  view full answer...
• 3,500 lb Leaf Spring Availability that is 23-1/8 inches Long
  If you dimensions all match the part # SP-216275 except the height from the pin to the eyes is a bit less (they flatten out over time), this spring will still fit and work well. Especially if you have a load on your trailer as well. The two big things to use when picking out leaf springs is the length of the spring as well as the axle capacity. This is for a 3,500 lb axle. If that matches your trailer this is just what you need.
  view full answer...
  
• Replacement 23-1/4 Inch Leaf Springs for 1984 Prowler Trailer
  If your 1984 Prowler Trailer has 3,500 pound axles, I recommend sticking with a 3-Leaf spring like the Universal Group 3-Leaf Double-Eye Spring # SP-216275 to replace your 23-1/4 inch springs. This leaf spring measures 23-1/8 inches from eye to eye, which will give you a much better fit to replace the existing springs on your trailer. A leaf spring of closer to 25 inches might be too long for the current hanger setup on your trailer. Older leaf springs will elongate a bit over time, meaning...
  view full answer...
• How to Pick Out Replacement Leaf Springs for Older Komfort Fifth Wheel
  In order to pick out the correct springs we need a couple pieces of information. The length of the spring without a load on it and the axle capacity needed. Your springs being totally flat does indicate that you need to replace them but I would need to know the unloaded length from spring eye to spring eye and then the axle capacity. Jack the trailer up so that the spring no longer has a load on it and measure it. Subtract around 3/4 of an inch since springs flatten and stretch out over...
  view full answer...
• Replacement Double Eye Leaf Spring That is 23" Long
  The closest spring I have to that is the 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles part # SP-216275 this is 23 1/8" eye to eye and is built for use on a 3500lb. axle so even though it is not a 4 pack it may have the capacity you need. If you have more details on the trailer and it's capacity I can try to come up with a different solution for you if you feel this will not work for you.
  view full answer...
• How to Determine Correct Replacement Slipper Springs
  What happens to slipper springs over time is they elongate and flatten, which is exactly what seems to be what happened with your springs, as opposed to the wrong length being put on (that is, of course, possible, but less likely). You can replace your springs but there are a few things you need to know, starting with the weight rating of the axle; from there you need the length of the center eye to the end of the spring while taking into account the fact your springs have elongated....
  view full answer...
  
• Hanger Spacing When Using 23-1/8" Double-Eye Leaf Spring on Single Axle Trailer
  On a single axle trailer you will want to have a hanger spacing of around 22-3/4 inches when using the 23-1/8 inch long Double-Eye Spring # SP-216275. This will allow that rear shackle to correctly lean away from the axle for proper suspension travel. I have attached a short video review on this leaf spring that you can check out as well.
  view full answer...
• Leaf Springs Keep Breaking On Tandem 3,500 Axle Trailer
  If you are having issues with leaf springs breaking then you first need to verify the weight capacity of the leaf springs which should be based on the axle capacity. If the leaf springs are rated appropriately then you will need to make sure the trailer is not overloaded. If you like, you may be able to use a higher rated leaf spring to fix your issue but this would also equate to a slight harsher ride therefore it is important to make sure you have the correct rating and are not overloading...
  view full answer...
• Replacing Suspension On A 1995 Mallard 23P Travel Trailer
  Before removing and potentially replacing the leaf springs, trailers sometimes lean to one side because of the way it's loaded. This uneven loading can cause the leaf spring to wear down quicker over time but could maybe be corrected by reorganizing the weight in your camper. Given it's a 1995, it could just be time for replacement as well. Trailer leaf springs need to be selected based on the axle weight rating, as well as on the spring type (slipper or double-eye), length and width dimensions....
  view full answer...
• Replacement for 23-1/4 Inch Long, 2 Inch Wide Double Eye Leaf Spring
  So long as other dimensions match, you can replace your 2 inch wide leaf spring with the narrower 1-3/4 inch leaf spring, though if you have any added movement with the narrower spring, which is possible, you will want to change out your hangers as well. The closest we have in length to the spring you mentioned is the 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles # SP-216275 which measures 23-1/8" long from center eye to center eye. That said, they are rated for 3,500 lb axles, and...
  view full answer...
• Determining Which Replacement Leaf Spring For 2005 Forest River Flagstaff Popup Camper
  The closest spring we have to what you need for your daughters 2005 Forest River Flagstaff Popup Camper is the 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long # SP-216275 which measures 23-1/8" center of spring eye to center of spring eye which is likely what her trailer needs due to springs getting longer slightly as they wear out. The # SP-216275 is rated for 3500lb axles, or 1750lbs per spring which will still work for her trailer, and though it has 3 leaf's the rating...
  view full answer...
  
• Correct Replacement Leaf Springs for Trailer with Dexter 3,500 Lb Axle
  In order to find the correct replacement leaf springs for a trailer you'll need to know the type (slipper/double eye), weight capacity, and unloaded length. The springs will stretch over time so the new replacements will be shorter. If you have a 3,500 lb axle with double eye springs then you'll likely need 3-Leaf Double-Eye Spring part # SP-216275 which measure 23-1/8" long.
  view full answer...
• Replacement Leaf Spring Recommendation for Trailer with 3,500 lb Axles and Length 23-1/4
  Springs tend to stretch over time as they wear out and flatten. This means that you need to go with springs that are slightly shorter than what your old springs measure. For that the best option is the 3,500 lb leaf spring part # SP-216275 which measures 23-1/8 inches. This will work great as a replacement for the spring dimensions you mentioned. Around 1/4 inch shorter than the worn out spring is the best option typically. But that's not a hard and fast rule so for your situation the spring...
  view full answer...
• Replacement Trailer Leaf Springs for 2005 Terry M-250RKS with 3,500 lb Axles
  Most likely the best leaf spring option we'll have for your 2005 Terry M-250RKS is the # SP-216275. This depends on how you measured your leaf springs though. This spring measures 23-1/8 inches from eye center to eye center. If you measured your springs with the weight of the trailer on the suspension they would have stretched out slightly. When you combine that with the fact that old springs typically stretch slightly over time the # SP-216275 could easily be the correct size. Worse case...
  view full answer...
• Replacement Boat Trailer Leaf Spring Due to Age and Corrosion of Salt Water
  I personally have never seen any galvanized or other coatings put onto leaf springs. I agree with you that whatever coating that may be put on them would surely wear or peel over time. The most important thing with replacing leaf springs is getting the correct spring. For this you will want to know the the specifications of your trailer as well as what springs you had. I have included a picture to help with the measurements. Weight Rating of Axle and Trailer Number of Spring Leaves Eye...
  view full answer...
  
• Replacement Leaf Spring For a Trailer With a 24" Eye Center to Eye Center and 3 Leaves
  It sounds like you may have the 3-Leaf Double-Eye Spring # SP-216275 on your trailer. This spring is 23-1/8" long from eye center to eye center when fully relaxed and has 3 leaves. As a leaf spring is loaded with weight it will get longer and overtime as it loses its curve it will measure to a longer length. You can follow the curve of the leaf spring from the center bolt in the leaf spring for a measurement of 12-7/16". This leaf spring is rated for a 3,500lb trailer axle. Do remember...
  view full answer...

Do you have a question about this Trailer Leaf Spring Suspension?