bing tracking image
  1. Trailer Axles
  2. Dexter Axle
  3. 2200 lbs
  4. 72 Inch Long
  5. 58 Inch
  6. Spindles Only
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs

Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs

Item # T20BTR-EZ-7258
lowest price pledge
Our Price: $145.28
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle beam measures 72" from hub face to hub face (when hubs - sold separately - are mounted) and 58" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs part number T20BTR-EZ-7258 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (432)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - T20BTR-EZ-7258

  • 2200 lbs
  • 72 Inch Long
  • 58 Inch
  • Spindles Only
  • Leaf Spring Suspension
  • No Hubs
  • Dexter Axle
  • Easy Lube Spindles

Round trailer axle beam measures 72" from hub face to hub face (when hubs - sold separately - are mounted) and 58" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round idler axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, EZ-Lube spindles - no drop
    • Built-in grease zerk for simple lubrication
  • Spring seats and spindles are welded on
  • Limited 2-year warranty


Specs:

  • Weight capacity: 2,200 lbs
  • Hub-face-to-hub-face length: 72"
  • Spring-center-to-spring-center length: 58"
  • Tubing outer diameter: 1-3/4"
  • Spindle size: 1-1/16"


Bearing, Race, and Seal Information

  • Bearings:
    • Inner bearing: L44649
    • Outer bearing: L44649
  • Races:
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal: RG06-020
    • Inner diameter: 1.5"
    • Outer diameter: 1.987"
  • Grease cap: RG04-040
    • Diameter: 1.99"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



T20BTR-7258-EZ Dexter Replacement Idler Axle Beam - Easy Lube - 72" Hub Face - 58" Spring Center - 2,200 lbs






Customer Reviews

Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs - T20BTR-EZ-7258

Average Customer Rating:  4.8 out of 5 stars   (432 Customer Reviews)

Round trailer axle beam measures 72" from hub face to hub face (when hubs - sold separately - are mounted) and 58" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).

by:

Springs seats were missing


Comments
We will have this taken care of for you. I will have our customer service team reach out.
-- Etrailer Expert Jenny N - 08/08/2022


by:

I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down).
Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!




by:

Axle worked perfectly with all the other components i bought with it.




by:

Bought this for my boat trailer. Great looking axle took all the measurements and it looked like it would fit. When I put my hubs on it they were about one inch short. So being short there are no threads to tighten the nut against the bearing. So now I need to order there hubs. This should be mentioned when you order the axle. Or give the hub over all length.


Comments
The axel is working great with no problems.
Richard W - 11/04/2017


by:

Axle bolted right in place and has been performing flawlessly for a year now. Great product!!!




by:

1 yr later, axle and bearing set is working well.
I decided to replace the axle under my trailer rather than the whole trailer.
I like the pre-bend in the tube for keeping tires balanced under load as well as the basic finish rather than bare steel.
Purchase price made it even better after shopping around a bit.


Comments
Doing well, as you know, the axle gets used only when the trailer does so it sits a lot. But I do enjoy that it has the pre bend to it so when loaded up it tracks true and the tire wear is even.
Scott - 01/30/2018


by:

Received the axle quickly, perfect fit. Have bought from etrailer many times and will continue to do so


Comments
Axle is still good after a year
John C - 01/27/2021


by:

Shipped fast. Product seems strong. I do have a problem (not etrailer's fault), the axle I replaced didn't have a raised leave spring mount as this one does. That extra inch put my tires into the fenders (literally) :( will have to cut fenders off and probably end up getting another axle maybe one longer so I can have boat ride between fenders instead of over them.




by:

easy install, no issues after a year in use




by:

Helpful staff...quality products...fast shipping competitive pricing..etrailer recommended..that's why I am a repeat customer




by:

One of the best companies i have dealt with great communication and very fast delivery




by:

As usual, I can get parts cheaper and faster from etrailer. I don't even look for local suppliers these days. Since I discovered your excellent website and in-stock supplies, I just order and poof it appears, magic!




by:

The parts where just what we needed for our trailer Shipping was fast and no damage to parts.




by:

Should do the trick.




by:

The Axle fit perfectly and was a great deal! Everyone was great and even expedited the shipping up to Alaska. Will definitely be ordering parts from here in the future




by:

I now have 9780+ miles on my trailer. This item has held up to the task.




by:

Exactly what I needed. Came with all the parts necessary.




by:

Best axle i have every seen. No need for bearing buddies anymore.




by:

The right part showed up on time. Thank you etrailer.com!




by:

Axle is what I expected at a good price I will be back for more parts in the future




by:

fit just fine got it 3 days




by:

extreme high quality they built strong you will not find a better price anywhere




by:

Worked perfect!




by:

Axle arrive in good condition. Went together like it should. Very happy with the product




by:

This was a very good buy well worth the money still going down the road every day



25
433
Show More Reviews

See what our Experts say about this Dexter Axle Trailer Axles



  • Can Trailer Axle be Replaced With 1 Larger Hub-Face Measurement
    The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-7258 should work great for your application! The only time that having your hub-face sit out an extra inch would be a problem is if that made your trailer tires touch fenders that you might have on the trailer. If your trailer doesn't have any fenders then you won't have any problems going this route! Please note that if you only have 1 axle this is alright. If you have more than one axle then you'd need to swap out all...
    view full answer...
  • Is Dexter Trailer Idler Axle Beam with EZ-Lube Spindles Available
    While we do not have any axles with those measurements, we have one that is close, the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-7258 which has a hub-face-to-hub-face length of 72" and spring-center-to-spring-center length of 58". You can find the prices of all products directly on the product page.
    view full answer...
  • Axle Capacity of 1-1/2 Inch Square Axle.
    The only way to know for sure the capacity of your axle is based on the information from the manufacturer when the axle is new. Typically, 1-1/2 inch square axels have a capacity somewhere between 1,000 - 2,000 pounds. Sometimes the spindle and hub can also help point us in the direction of finding axle capacity, but even then it is still an approximation since it is impossible to tell if they are the same size as what came on the axle. The bearing number your provided does not match any...
    view full answer...
    Image 1 for
  • Straight Trailer Axles for a 2 Horse Trailer with 3,600 Pounds Gross Trailer Weight
    With the trailer weighing 1,600 pounds and 2 horses at 1,000 pounds each that would total 3,600 pounds which is over the capacity of both a single 2,200 pound axle and a single 3,500 pound axle. But if you have 2 axles then using 2 of the 2,200 pound axles, # T20BTR-EZ-7258, will be more than enough capacity. I have linked a video review of this axle for you. If it is a single axle trailer then you will need to order one from a local trailer supply store with a high enough capacity for...
    view full answer...
  • Availability of Complete Trailer Suspension Rebuild Kit
    We do not offer a complete kit with all of the components you will need but you can certainly select the components to allow you to rebuild your trailer's suspension. We always suggest that all the components in the suspension system be changed out at the same time. I have linked you to our main page for trailer axles; you can use the filters at the left-hand side of the page to narrow the products down to what you need. I provided also links to our pages for suspension components (where...
    view full answer...
  • Trailer Axle Availability with 58 inch Spring Center Dimension
    We have a 2,000 lb axle that has an overall length of 72 inches from hub face to hub face and has a spring center dimension of 58 inches like you need, part # T20BTR-EZ-7258. Check out the review video I attached for more info. We don't have a 3,500 lb axle that has those dimensions. 3,500 lbs is quite a bit of capacity for a 5 by 8 trailer, you might be able to get by with the 2k axle part # T20BTR-EZ-7258.
    view full answer...
  • Recommended Replacement 2,200-Lb Trailer Axle
    The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles, part # T20BTR-EZ-7258 measures 72-inches hub-face to hub-face, and overall measures 77-1/2 inches. You will want to make sure you have the correct measurement for the spring-center to spring center of 58-inches as well. This axle has a weight capacity of 2,200-lbs.
    view full answer...
  • Key Dimensions for Selecting Replacement 2200-Lb Trailer Axle
    The key dimensions to keep in mind as you select a replacement axle are the hub-face-to-hub-face dimension and the spring seat spacing. Axle # T20BTR-EZ-7258 is rated for 2200-lbs and has a 72-inch hub-face (HF) dimension and a 58-inch spring seat dimension as shown in the diagram I linked for you. Overall axle length will of course be a few inches greater than the HF spacing. The E-Z Lube spindle diameter is 1-1/16-inch. We have no axles with 72-1/2-inch hub face spacing.
    view full answer...
    Image 1 for
  • Back of Hub Dimensions for 60" Long Dexter Axle
    From the back of one hub to the back of the other hub for the 60" Long Dexter Axle # T20BTR-6048 will measure about 56-1/4". I did notice in the picture you submitted you have dimensions that are closer to a 72" axle like part # T20BTR-EZ-7258. For this axle the backs of the hubs will be about 68" apart. Please note that this ca vary depending on the axle and hubs that you use. If there is a specific axle on our site that you are interested in let me know and I can get some measurements...
    view full answer...
    Image 1 for
  • Shipping Weight of Dexter Trailer Axle T20BTR-EZ-7258
    Dexter Trailer Axle # T20BTR-EZ-7258 has a shipping weight 22-lbs. Its actual rated weight-carrying capacity is 2200-lbs. It could be used with leaf springs such as # SP-169275, a pair of which is rated for 2000-lbs.
    view full answer...
  • Can Replacement Trailer Axle with Smaller Diameter be Used on a Boat Trailer
    If the axle is bent up in the middle then that is normal. Trailer axles have a bow in them so that when weight is placed on the trailer it flattens out. That is part of what gives an axle its capacity. If there is not enough weight on the axle then the tires will remain toe in at the bottoms and you will get tread wear just on the outsides of the tread. If the axle is bent in some other way then replacing the axle is a good idea. The diameter difference means that you would likely have...
    view full answer...
  • How to Find Replacement Trailer Axle for 5x8 Trailer
    We have axles that use more of the common dimensions but it's always a good idea to double check what you currently have and try to replace it with something that has similar measurements. If you measured inside the spring seats for that 57-1/2" distance then one of our spindles that has a 58" spring-center measurement should work for your application - you just then need to make sure that the axle weight capacity matches what you need for your trailer. For example, the Dexter Trailer...
    view full answer...
    Image 1 for
  • Do Hubs Come Pre-Installed on Dexter 2,200 Pound Trailer Axles
    We do have a 72 inch, 2,200 pound trailer axle with hubs, # 20545I-EZ-72-10, but the hubs are not pre-installed. Everything is included (bearings, seals, races (the races already pressed in), grease caps, and lug nuts) just not pre-mounted. I have included a link to a video showing an example installation of this axle for you. This axle has hubs with a 5 on 4-1/2 bolt pattern. It is also available with a 4 on 4 bolt pattern # 20440I-EZ-72 with a 2,000 lb capacity.
    view full answer...
  • Will Hubs that Have Bearing Numbers L44649 Fit on Trailer Axle # T20BTR-EZ-7258
    Your current hubs are correct for fitting the spindles of the trailer axle # T20BTR-EZ-7258 that you are interested in. The correct EZ lube dust cover would then be the # RG04-040 and you'd be set!
    view full answer...
  • Replacement Trailer Spindle for L44643 Inner and Outer Bearings
    A spindle that uses both inner and outer bearing L44643 makes it a BT8 spindle, # TRU94FR. Please note that welding on new spindles is a precision job and should performed by a qualified welder with experience welding on spindles. The alternative is to replace the axle. Axles are measured from hub face to hub face and from spring seat center to spring seat center. For example, the picture I have included is for axle # T20BTR-EZ-7258.
    view full answer...
    Image 1 for
  • Dexter P-15 SLR Axle SN D4484069 Weight Capacity and Replacement Axle
    I spoke with my rep at Dexter axle and was informed your axle has a 3,500 lbs weight capacity, with a 58" spring center, and a 72" hub face. A comparable replacement is the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long item # T20BTR-EZ-7258. This axle has a 2,200 lbs weight capacity and measures 72" from hub face to hub face when hubs are mounted and 58" from spring center to spring center. If you would like to message me your hub requirements I would be glad to make a...
    view full answer...
  • Can Hubs from Old Axle Be Used With Dexter # T20BTR-EZ-7258 Replacement Trailer Axle
    If your existing hub assemblies use the # L44649 inner and outer wheel bearing, hubs and races are still in good condition, you can reuse them. I'd recommend replacing the bearings and # L44610 races. I wouldn't recommend trying to bend the axle back into place. When the axle was bent, the structural integrity of the metal might have been compromised to an unknown degree. Be safe, replace the axle. The axle has a hub face to hub face dimension of 72 inches and a spring center to spring...
    view full answer...
    Image 1 for
  • Replacement Axle Kit for Custom 5 x 8 Trailer that Has 60-Inch Spring Centers
    All of the axles and axle kits we offer use standard spring center spacing of 48-, 58- or 74-inches, such as the Dexter # T20BTR-EZ-7258 which has 58-inch spring centers. The link at right will let you see the entire category. Filters in the left margin let you sort the results. The exceptions are universal-fit axle-less suspension systems from Timbren, such as their # A35RS545 which is rated for 3500-lbs. Timbren axle-less systems fit any frame width and bolt or weld into place. These...
    view full answer...
  • Replacing A Dexter Axle Rated At 3,500 Lbs With HF Measurement of 73 And SC Measurement Of 58
    I do have some options for you. We do have an axle rated at 2,200 lbs with a hub face to hub face measurement of 72" and a spring center to spring center measurement of 58". It is the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs, part # T20BTR-EZ-7258. This is the closest axle we have to the measurements you need. Unfortunately, I do not have a 3,500 lbs axle with these dimensions. A better choice would be to go with a Timbren axle-less system. The Timbren...
    view full answer...
  • What Spindles are on Trailer Axle T20BTR-EZ-7258
    The trailer axle part # T20BTR-EZ-7258 that you referenced actually uses BTR spindles and not the lighter duty BT8. The BTR spindle has a diameter of 1.06 inch. For a idler hub that fits you could use the # AKIHUB-440-2-EZ-2K.
    view full answer...
  • Identifying a Replacement Axle for a 1993 Jayco Eagle 10 Trailer
    We have a couple options for 72" hubs. I have linked a diagram that will show you what dimensions you are looking for so you can ensure that's what you need on your 1993 Jayco Eagle 10 trailer. Also you may be able to find an axle tag or stamp that could help you identify the correct size of your current axle. If you don't need brakes we have the etrailer Trailer Axle with Idler Hubs - 72" Long - 2,000 lbs item # e37YR. These come with idler hubs that have a 5 on 4-1/2 Bolt Pattern. If...
    view full answer...
    Image 1 for
  • Can the Spring Seats On a Dexter 2,200 Lb Axle Be Moved and Re-Welded
    Yes, you can move the spring seats to 53-1/2" apart on the Dexter 2,200 Lb Trailer Axle part # T20BTR-EZ-7258, or part # 20545I-EZ-72-10. This is pretty common practice as manufactures just place the spring seats in a common spot but the customers can move them as needed. That said, you will likely destroy the old ones getting them off so I also recommend getting the Axle Spring Seat part # TRSS175 (2).
    view full answer...
  • Determining If 73" Axle Will Fit 2001 Coleman Utah Pop Up Trailer
    It might, but the only way to be sure would be to measure the current axle installed on your 2001 Coleman Utah Pop Up Trailer. You will need to measure from hub face to hub face, and spring seat to spring seat. As long as the hub face to hub face measurement matches then the spring seats can be removed and welded in the correct location as needed. For example the Dexter Trailer Idler Axle Beam # T20BTR-EZ-7258 measures 72" hub face to hub and 58" spring center to spring center as shown...
    view full answer...
    Image 1 for
  • Are There Hubs with 4x100 Bolt Pattern to Fit Dexter 2,200 Pound EZ-Lube Axle
    The Dexter Trailer Idler Axle Beam # T20BTR-EZ-7258 that you referenced will match up to 2,200 or 2,000 pound hubs like the Dexter # 8-91-05UC1-EZ, which features a 4 on 4" bolt pattern. We do not have any 4x100 bolt pattern hubs available at all, as this isn't a very common pattern anymore. You may be able to source compatible hubs with this bolt pattern locally through a trailer shop or re-seller, but you will need to make sure they use the right inner and outer bearings. The spindles...
    view full answer...


< Previous
12



Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee DeAnne T
Updated by:
DeAnne T
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924