bing tracking image
  1. Trailer Axles
  2. Dexter Axle
  3. 3500 lbs
  4. 89 Inch Long
  5. 74 Inch
  6. Leaf Spring Suspension
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs

Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs

Item # T3584F-EZ-8974
lowest price pledge
Our Price: $225.20
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 34 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs part number T3584F-EZ-8974 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (392)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - T3584F-EZ-8974

  • 3500 lbs
  • 89 Inch Long
  • 74 Inch
  • Leaf Spring Suspension
  • Spindles Only
  • No Hubs
  • Dexter Axle
  • Easy Lube Spindles

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, EZ-Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Limited 2-year warranty


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Flange-to-flange length: 82-5/8"
  • Tubing outer diameter: 2-3/8"
  • Spindle size: 1-1/16"
  • Bearings (sold separately):
    • Inner bearing: L68149
    • Outer bearing: L44649
  • Brake flange configuration: 4 bolt


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


Hub Face and Spring Center Measurements on Standard Trailer Axle

Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



T3584F-8974-EZ Dexter Replacement Axle Beam - Easy Lube - 89" Hub Face - 74" Spring Center - 3,500 lbs






Customer Reviews

Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs - T3584F-EZ-8974

Average Customer Rating:  4.8 out of 5 stars   (392 Customer Reviews)

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).

- T3584F-EZ-8974
by:

With Alex's assistance and knowledge of my trailer requirements, I installed two 3500 lb axles. These axles are superior to any others that I was shopping for, and with a combined GVW of 7,000 lbs my trailer is now suited for any medium sized load.



- T3584F-EZ-8974
by:

Came in bent


Comments
Axle should have a slight bend to it.
-- Etrailer Expert Sierra K - 10/12/2021


- T3584F-EZ-8974
by:

Perfect fit, nice axle and fast delivery. I liked it so much I ordered another a day later to replace the front axle. My 30 yr old tandem trailer's axle broke at the wheel, so I went to a local store which doesn't stock them anymore. Could of ordered a so so axle for $94 + $28 shipping and wait 2 weeks but needed it fast. I went to a major trailer sales & service shop and told "maybe we could get one for $250" with no call back. I decided to check out etrailer and was surprised to see Dexter axles that fit my trailer for $140 with FREE shipping in 3-4 days! Ordered Sat. night, got it Wednesday afternoon, and installed it (with brakes) in an hour. Only problem I had was determining if spindles would fit my hubs. They stated "1/16th spindle" and must be industry talk but french to me. So I had to look up bearing #'s they listed to check bearing sizes to make sure they fit my hubs. A little more time but not a deal breaker. The best part was the huge difference in ride with just one new axle. Always had bouncing loaded or not, but now with just one axle the ride is smoother no load and with my 4000 lb tractor on it. Can't wait to get the 2nd axle on that arrived today. First two pics show the difference between the old straight axle and the new dexter axle. The third is a pic of my 2nd axle, oh well. Etrailer is my new go to place for trailer parts. I have 7 trailers.



- T3584F-EZ-8974
by:

Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer. Your staff was of great help finding my right axle. I would recommend etrailer to everyone.


Comments
Axle is working out great. Easy to install, fit perfectly.
Kenneth - 11/04/2018



- T3584F-EZ-8974
by:

Specs. matched exact to the broken axle and was easy to install. I was surprised that the axle was pre-wired although it was not replacement of the brake axle on my trailer. Hub fit nicely and trailer is now ready for the next haul job. Delivery was as promised.


Comments
The axle has been a good replacement and has worked as it should.
Ronald E - 08/13/2021


- T3584F-EZ-8974
by:

Local supplier said this part was not available for months, E trailer delivered in a few days.


Comments
Trailer axle was a perfect fit and after going to several local dealers first, etrailer was the only company I could find the parts I needed during Covid. Parts have had no issues for a year of service.
Dalton R - 01/14/2022


- T3584F-EZ-8974
by:

working great after 1 year of use and several thousand miles put on the axle.



- T3584F-EZ-8974
by:

Axle is perfect. Holding up well after a year plus.



- T3584F-EZ-8974
by:

Etrailer was quick to ship and and axle was a perfect fit, axle was good quality. i have used them before as well. they are a good company. thsnks jack



- T3584F-EZ-8974
by:

Great service as always out of etrailer. I ordered 2 new axles for my car carrier, great specs on your webpage made for a perfect match. Items arrived in 3 days, heavily wrapped and will add that the end of the axles which could rust if not installed soon were covered in grease, a nice touch to insure no damage. Thanks as always for having a great source for all things trailers!...


Comments
one year later no issues at all
Michael - 06/08/2020


- T3584F-EZ-8974
by:

Friendly, curteous service and prompt receipt of ordered parts. I have told many people in Kodiak, Alaska about your superior service, prices and demeanor. Thank you!



- T3584F-EZ-8974
by:

very pleased with this product .precise measurements .arrived in a timely manner.top notch quality .would definatly buy from etrailer again



- T3584F-EZ-8974
by:

Perfect fit, I wish I would have been smart enough to order U-bolts with it. I didn’t know how rusty the old ones were!



- T3584F-EZ-8974
by:

Product was exactly as described and of good quality. Will certainly use etrailer again for my trailer needs.



- T3584F-EZ-8974
by:

I'm very pleased with all of my purchases from eTrailer. Everything has seemed to be of excellent quality and value. The wiring kits and directions were very well thought out and one of the projects I completed would not have been possible had it not been for the excellent videos on the website. I'm an eTrailer customer for life!



- T3584F-EZ-8974
by:

The axle fit like a glove, It took about an hour and half by the time I put the tools away I only had two jack stands make sure you have four or cinder blocks will work also and a new bearing and U bolt kit. I was going thru one used tire a week because the axle spindle was bent now this trailer is riding smooth!. They shipped the axle right away, very happy with the product and service from etrailer.



- T3584F-EZ-8974
by:

Fast shipping, great communication about shipping. Perfect fit for utility trailer, just what I needed. Thank you!


Comments
Dexter quality, works great
Duane - 01/21/2021


- T3584F-EZ-8974
by:

Great service !!!



- T3584F-EZ-8974
by:

My utility trailer bearings locked up and welded to the spindle, along with the seal. Repair would have cost as much as a new axle. Ordered this axle Thursday night around 10pm, Arrived Saturday morning around 10am. They were running a special and regular shipping was free but I paid for 2nd day delivery which was discounted. Actual product was as described, wrapped well end to end with rubber protectors over spindles. Installation was a snap and took about 20 minutes start to finish with no help. Still waiting on hubs to be delivered but I am expecting the axle to do what it is supposed to. I will definitely use etrailer again, and should I need another axle, I wouldn't think twice about ordering this one again. Excellent business with an excellent product.



- T3584F-EZ-8974
by:

Personal service was great. Received a call regarding an address issue; person from etrailer wanted to make sure address was correct prior to shipping. This ensured order received without delay. Axels are a perfect fit; on-line videos for installation are very helpful. All your videos are well done; informative and helpful. Prices were better than any local suppliers in the area. I still trade with local businesses, but for large purchases I go to etrailer. The seal puller is a must have tool, works great!!



- T3584F-EZ-8974
by:

The axel I bought was of good quality, cheaper than buying a local, and the shipping was free! I wish the website would have prompted me to buy the extra items I needed. Example: bolts and plates to attach the axle to the spring. Bolts for the brake assembly, wheels, tires, Springs etc. I did not need all those things but it would be nice to have them pop up as choices.



- T3584F-EZ-8974
by:

Needed a new 3500 pound axle for a 30 year old utility trailer, ordered a new one plus the u bolt kit, items were shipped the next day and received 3 days later. Axle was a top quality Dexter axle. Both items were well packed for their trip. I will most certainly order all of my trailer parts from these folks, Great service, great parts and great follow up.



- T3584F-EZ-8974
by:

This is the second time I ordered off of Etrailer. Renée did an excellent job of putting together all the parts that I needed and they were all in stock. And I received my trailer axles hubs and bearings in four days almost all the way across the country Etrailer does an excellent job with quality parts



- T3584F-EZ-8974
by:

Service really doesn’t exist anymore, however these guys are good. The trailer company wanted to charge me over 1K! Watching the videos and talking to the guys I got the confidence to do it on my own. Super easy! I’m back hauling construction debris. Oh, and I will never haul 8 yards of top soil ever again!


Comments
Given that a yard of topsoil weighs around a ton 2000 lbs, loading 8 yards onto a 3500 lb capacity axle probably wont end very well!
-- Etrailer Expert Mike L - 03/13/2018


- T3584F-EZ-8974
by:

the axle that I got from etrailer was as advertised and delivered promptly. The price was excellent and overall I am very satisfied and will be a return customer.


Comments
great
mike k - 07/18/2016


30
403
Show More Reviews

Ask the Experts about this Dexter Axle Trailer Axles



  • Replacement 3500-lb Trailer Axle for 2007 Spree by KZ Tandem Trailer
    If your KZ Spree trailer's 3500-lb-rated axles are bent from damage or from overloading them beyond their weight capacity then they should be replaced. This will not only restore the trailer's handling but it will also prevent continued issues with uneven tire wear. Usually an axle that was bent from being overloaded will result in more wear on the inside edges of the tires. A new axle has a light upward bend that levels out under load. Our two 3500-lb-rated axles without hubs are displayed...
    view full answer...
    Image 1 for
  • Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
    Brake flanges on 3,500 lb axles are going to be the exact same between a Dexter axle and Lippert but sometimes the Al Ko options are different. I believe you are asking about the price difference between the Dexter 3,500 lb axles part # T3584F-8974 and # T3584F-EZ-8974 though which that comes down to the spindle style. The more expensive EZ lube spindle axle has a grease fitting on the end of it that allows you to easily pump grease into it whereas the other option does not and requires...
    view full answer...
  • How to Determine if 3,500 Hubs will Fit Axle Hub T3584F-EZ-8974
    Most 3,500 lb trailer axles out there are Dexter axles like the part # T3584F-EZ-8974 that you referenced. Or another very popular brand is Lippert. Most likely you have one of those two and that would mean that your current hub would fit the spindle of the # T3584F-EZ-8974. This comes with a stepped spindle and a castle nut with a cage type cotter pin setup like you mentioned having. What you can do is measure the diameters of the spindle on your axle where the bearings ride to know for...
    view full answer...
    Image 1 for
  • How to Determine the Axle Capacity of a 1978 25 foot Monitor Travel Trailer
    Based on the diameter of the axle that you listed most likely it is a 3,500 lb axle. However, there should be a plate near the coupler on the frame of your trailer that should have the axle and trailer capacity listed. That would be the final authority on the capacity.
    view full answer...
  • Availability of 7000-lb Dexter Axles
    We do offer Dexter axles in weight capacities up to 5200-lbs but not their 7000-lb axles. The link provided will let you see all and you can narrow the product results using the filters in the left-hand margin. We offer axles with and without hubs and in several lengths.
    view full answer...
  • Spindle Measurements Help Determine Axle Capacity on 3500 Pound Dexter Trailer Axles
    The 1-1/16 measurement is the diameter of where the outer bearing rides on the spindle. There are different capacity spindles that have this same measurement. Ones with a thicker stem, the part welded to the axle, have a higher capacity and that is what is on axle # T3584F-EZ-8974. Each of the spindles is rated for 1,750 pounds for a total of 3500 pounds for the whole axle.
    view full answer...
  • Can Trailer Hubs Be Shimmed to Adjust Camber
    If you are talking about adjusting the camber of your trailer this can be done by a professional at a trailer alignment shop. There's really no way to shim hubs as they are only held on by the one spindle nut at the end of each axle. The 4 bolt mounting flange you are referring to is for the brake assemblies to mount onto. You would not want to shim this flange as the assemblies need to mount completely square relative to the spindle and installing shims would throw that all of and wouldn't...
    view full answer...
  • How to Find a Trailer VIN
    Usually commercial trailer manufacturers will indicate the unique vehicle identification number (VIN) on the same plaque that carries their brand name, model number information and the trailer specifications. The model number of the trailer is not the same as the VIN number; the same model number may be used on multiple trailers but a VIN number is unique and individual to each one produced. If you cannot find the VIN on the trailer tongue you can check for plaques on other parts of the...
    view full answer...
  • How Much More Clearance Under Trailer Using Torsion Axle With Negative Angle
    In order for you to realize more clearance under your trailer, using torsion axles with down degree angles will give you more clearance. On a system that has a 10 degree up axle, the center line of the spindle to the bottom of the trailer frame is approximately .96 inches. That is based on a newer system. If you have an older system on your trailer that measurement may be much less. For a 10 degree down you would have a difference of 2.08 inches. For 22.5 degree down, the difference...
    view full answer...
  • Will Changing Travel Trailer Axle Increase the Trailers Overall Weight Capacity
    We do offer axle beams alone and also complete axle kits that include hub/drums, brakes etc. All can be viewed by clicking on the included link. I also was unable to find a cross-reference for your axle number 4330537. This may be a production code rather than a part number. You can certainly change out your axle to a higher-rated part, such as the 3500-lb-rated Dexter part # T3584F-EZ-8974, but this will NOT necessarily increase your trailer's capacity. The trailer's frame design and...
    view full answer...
  • How To Find Right Location To Install Center Equalizer Hangers On 18 Ft Tandem Trailer
    There are a couple ways to determine where to place the center equalizer hanger on your trailer. The best way to find the right location is to find a trailer with the setup already installed and measure the locations of the hangers. The second way is to use the formula shown on the attached picture. You can adjust the location of the center hangers based on the tongue weight as the formula shows. Since there are so many different possibilities with the type trailers and what they are...
    view full answer...
    Image 1 for
  • Dexter Trailer Axle Measurements on 89 Inch Axle
    The Dexter Trailer Axle # T3584F-EZ-8974 measures 89 inches from hub face to hub face. The flange-to-flange measurement is 82-5/8 inches. As long as the Dexter axle has the same capacity as the Lippert axle and the same hub face and spring center measurements, it will not be a problem to have them both on the same trailer. Lippert and Dexter axles are very similar and even use the same bearing numbers. I have attached a diagram showing where to measure for the hub face and spring seat...
    view full answer...
    Image 1 for
  • Replacement Front Axle for a 1994 Terry 22U Travel Trailer
    Trailer axles should have a bow in them that points up in the center. This is so when weight is placed on it, it flattens out. If there is not enough weight on the axle the bow will still be there and the tires will toe in like you are describing. But that should not cause excessive heat build up. It seems like there is either not enough or no grease in the hub. Or If that bow is bad enough it could be stressing the bearings very badly. We have several axles, see link, but they are the...
    view full answer...
  • Wall Thickness of Dexter 3,500 lb Axles
    The wall thickness of Dexter 3,500 lb axles like the part # T3584F-EZ-8974 is .16 of an inch.
    view full answer...
  • Can the Spring Perches of Trailer Axles Get Moved
    Moving the spring perches on the trailer axle part # T3584F-EZ-8974 that you referenced wouldn't affect the weight capacity of the axle. Especially since you aren't moving them that far. I attached an install video for this axle for you to check out as well.
    view full answer...
  • Trailer Suspension Makes Noise When Making Sharp Turn While Backing up
    If everything checks out on the suspension and shows no sign of damage you should be good to go. You may have heard the shackles on the suspension moving and that caused the noise when you made the sharp turn to park the trailer. If everything checks out when you are towing normally, you should be fine.
    view full answer...
  • Replacement Axle for 1981 Wells Cargo Enclosed Trailer That Shows Uneven Tire Wear
    Uneven tire wear can indicate any of several problem conditions. If a tire tread surface wears on its outside edges more than it does in the middle of the tread then this generally indicates under-inflation. If it wears more in the middle than on the sides this indicates over-inflation. If the two tires on an axle both have more wear on the inside edges of the tread then this usually signals that the trailer has been overloaded. A bent spindle is of course another possibility. We do sell...
    view full answer...
  • How Does EZ-Lube Spindle Grease Hub Components
    The EZ-Lube spindles have a hole in the spindle so that it fills the hub components from the back of the inner bearing. This forces air out of the hub area and will disburse the grease toward the outside of the hub on the grease fitting side. I have attached a photo of an EZ-Lube spindle that shows the hole where the grease exits.
    view full answer...
    Image 1 for
  • What is Causing Wear on Outer Edge of Passenger Side Tire on Trailer
    I first recommend checking to make sure the tire is properly inflated to the maximum psi listed on the tire's sidewall. If the tire is under-inflated, the sides of the tire tread will wear quickly. If the tire is inflated properly, then it's very possible that there is an issue with the trailer's suspension components or axle/spindle. Since the wear you noticed is only on the outer edge of the tire, this might indicate that the spindle is not parallel to the ground. There could be a suspension...
    view full answer...
  • Locating Replacement Axles for 2002 Keystone Hornet Trailer
    If you are looking to replace the axles on your 2002 Keystone Hornet Trailer, you will first want to take a couple measurements on your existing units. You will start by measuring the distance from one hub face to the other. You will also want to measure from the center of one spring seat to the center of the other. I have included an image that clarifies these dimensions. Lastly, you will need to determine the axle capacity on the trailer to ensure you are maintaining the trailer's overall...
    view full answer...
    Image 1 for
  • Finding a Replacement 3,500 Lb Axle
    Based on your bearing numbers and grease seal, you have a 3,500 lb axle. We have replacements that will work so long as your current axle has has a hub face to hub face measurement of 89" (represented by the "A" in the accompanying photo) and your spring center to spring center length is 74" (represented by the "B"). I recommend going with Dexter Axle with E-Z Lube Spindles # T3584F-EZ-8974, which has built-in grease zerks for very simple lubrication. I have added links to video reviews...
    view full answer...
    Image 1 for Image 2 for
  • Choosing the Correct Replacement for a Bent Axle
    In order to choose the correct replacement axle, you will need to know the dimensions of your current axle's hub-face to hub-face and spring center to spring center as in the diagram I have added; the other thing you would want to know is the weight capacity of the axle you need. I've added a link to our selection of axles for you to take a look at.
    view full answer...
    Image 1 for
  • How to Determine the Weight Capacity of a 20' x 8.5' Cargo Trailer with Two 3,500 lb Axles
    There is a little more that goes into calculating how much weight you can carry than just adding the axle weight capacity, but it is a good start. Any time you are carrying weight you will be limited by your least rated component. So even though your axles may have weight ratings of a combined 7,000 lbs, if your trailer frame is only rated for 6,500 lbs then that is what you are limited to. There should be a sticker or stamp somewhere on your trailer frame that has a GVWR (Gross Vehicle...
    view full answer...
  • What Size Axles are On a 2001 CarMate 14 Foot Enclosed Trailer?
    Unfortunately I am not able to tell what axles you have on your trailer without more information from you. The easiest way to tell a capacity is by simply measuring the diameter, but the more accurate option is to pull off one of your hubs and get the bearing numbers from your inner and outer bearings as well as the seal. I've attached an article to assist in getting that information. Typical Axle Diameters Based on Axle Capacity: 1,000-lb - 2,000-lb Axles: 1-1/2" - 1-3/4" diameter 3,500-lb...
    view full answer...


< Previous
123. . .8






  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Sarah H
Expert Research:
Sarah H
Employee Lindsey S
Written by:
Lindsey S
Employee DeAnne T
Updated by:
DeAnne T
Employee Laura H
Updated by:
Laura H
Employee Mike S
Updated by:
Mike S
Employee Jeff D
Installed by:
Jeff D
Employee Nicholas E
Test Fit:
Nicholas E
Employee Alan C
Video by:
Alan C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.