bing tracking image
  1. Accessories and Parts
  2. Timbren
  3. Vehicle Suspension
  4. Lift Spacers
Timbren 1/2" Spacer for Raised Frame Vehicles

Timbren 1/2" Spacer for Raised Frame Vehicles

Item # TA25722-90P00
lowest price pledge
Our Price: $19.78
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.3 lbs
Quantity: 
In Stock
TA25722-90P00 - Lift Spacers Timbren Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
1/2" Spacer fits vehicles with raised frames. Call 800-298-1624 to order Timbren accessories and parts part number TA25722-90P00 or order online at etrailer.com. Free expert support on all Timbren products. Guaranteed Lowest Price and Fastest Shipping for Timbren 1/2" Spacer for Raised Frame Vehicles. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (35)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Timbren Accessories and Parts - TA25722-90P00

  • Vehicle Suspension
  • Lift Spacers
  • Timbren

1/2" Spacer fits vehicles with raised frames.


Features:

  • Spacer fits vehicles with raised frames
  • Thickness: 1/2"
  • Quantity: 1 spacer


Dimensions


A25722-90P00 Timbren 1/2" Spacer for Raised Frame Vehicles





Video of Timbren 1/2" Spacer for Raised Frame Vehicles

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Timbren Vehicle Suspension TA25722-90P00 Review

Speaker 1: Today we're taking a look at a Timbren 1/2 inch Spacer for raised frame vehicles. Timbren recommends that you have a 1/2 inch to an inch of clearance between the Timbren and the contact point when the vehicle isn't under a load. If the clearance is more than what's recommended, then a spacer is the ideal solution. It installs easily and allows you to have full function of your Timbren suspension system even though you have a vehicle with a raised frame. This particular spacer measures a 1/2 inch thick. Top to bottom is 1/2 inch.

The hole here in the center will accepts 3/8 inch diameter hardware.Remember that you may need longer hardware since you're adding the spacer to your setup. You can go to your local hardware shop and pick something up. That's exactly what we do when we install these on customer vehicles here in our shop. When it comes to the overall diameter, edge to edge we're looking at four inches. With this part number you get one spacer.

I also want to mention that we do offer this in a one inch thickness with part number A25723-90AH00. You can view that right here at etrailer.com. That's gonna do it for today's look at the Timbren 1/2 inch spacer for raised frame vehicles.


Customer Reviews

Timbren 1/2" Spacer for Raised Frame Vehicles - TA25722-90P00

Average Customer Rating:  4.9 out of 5 stars   (35 Customer Reviews)

1/2" Spacer fits vehicles with raised frames.

- TA25722-90P00
by:

I used the spacers after checking measurements before installation on my GMC 2021 Sierra 1500 AT4. More information in my review of the full enhancement system to follow.



- TA25722-90P00
by:

The timbrens help control sway plus providing load leveling with a heavy load. I really like them/


Comments
Been working great, helps keep PU level when trailer is attached with out load levelers! For long haul I still use the load lever hitch though.
Alfred - 10/22/2021


- TA25722-90P00
by:

They work like they are supposed to. I used them in conjunction with my timbrens to take up some gap on them. For reference to those with an at-4 GMC, I have a 2020 and with this 1/2" and the timbren (it was actually only 4 1/2" tall, not 5" like the images showed) have about 1.25" gap between the bottom of the timbren and the axle stop. I was under the impression that the timbren itself was 5" based on the image in the kit I got, tgmrck15s, so I'm a 1/2" shorter than I wanted but I will run it for a while and see how it looks when loaded with my trailer before going any thicker with a spacer.



- TA25722-90P00
by:

Just what I needed to reduce the gap between my Timbren helper springs and the bump stops.



- TA25722-90P00
by:

The wrong spacer was ordered and Danielle was helpful with getting that order cancelled and a the correct part sent. Unfortunately, and unbeknownst to us the part had already been picked and sent down the chute so I ended receiving both sets. But Danielle saved the day by emailing a return label, which made it a simple process to get the wrong set returned. The Spacers themselves were pretty easy to install and closed the gap between the Timbren Spring and the axle contact point to where it will engage sooner. They, the Timbren's, were doing their job before adding the spacer but I was looking for a little less squat when the trailer is connected and by adding the spacer was able to achieve it.



- TA25722-90P00
by:

Good product, does exactly what it is designed to do. The only words of wisdom I can pass on are to make sure it is not riding to close to the axle when your truck is empty or it will kick and have a rough ride (when empty only). This space can be adjusted by adding or removing the spacers. You can see in the picture that I have about 1.5 inches of clearance on my setup. Once the truck is loaded and they are in use they perform beautifully. Definitely helps reduce sag and supports the load evenly from side to side. 2018 F150 XLT FX4



- TA25722-90P00
by:

Had Timbren rear suspension system installed on my F250 Super Duty. I use with a 3horse heavier blt trailer with 8ft short wall. I can't believe how much more stable the truck feels with this system. Love it and would most certainly recommend this system be added to their truck. I wish I knew years ago to add this system to my truck.



- TA25722-90P00
by:

Perfect fit and dialed in the clearance just the way I wanted it. I preferred to have my Timbrens on the closer side of what they suggested. I do wish they came with a longer bolt though for convenience sake. Fortunately, on the 2020 Silverado 1500's I didn't need the locknut at all, the hole is threaded. A little red lock tight for a little added security and I was done. They are holding great.



- TA25722-90P00
by:

I am very happy with the performance of Timbrens on my 2014 Ford F-250. When unloaded and not needed, the Timbrens sit idle, but when I hitch up my 7000 lb trailer, the Timbrens provide additional support to the stock springs which results in better rear end stance and better handling while towing. I think it makes my F-250 more like a F-350 when towing. Because the original Timbrens installed were about 1 and 1/2 inches from the axle, I added the 1/2 spacer, which put the Timbrens in ideal position in regard to the axle and loading.



- TA25722-90P00
by:

Works well. At first, I had too many spacers, and it caused a harsh ride. I removed 1" of rubber and got my good, no load ride back. When I hitch up my 5th wheel toy hauler, I get a sure, stable ride, without rear end sag and front end lift.



- TA25722-90P00
by:

worked great


Comments
Still awesome, like new
Brian T - 08/08/2021


- TA25722-90P00
by:

I have had these on many of my trucks, great product, better than air bags for me. I put these on a 2013 F-150 that pulls a 5000 pound boat. Easy installation and nice ride. Keeps my headlights aimed properly, no sag. Highly recommend.



- TA25722-90P00
by:

The spacers are great. I had previously installed the TORTUN4 Timbrens, but with a 6" lift the truck still sat too low in the rear when loaded. The spacers allowed the timbrens to come into affect much sooner and prevent rear end sag. Didn't know spacers were an option until I found them on etrailer. Thanks for an awesome website!



- TA25722-90P00
by:

Well made part. I actually need these instead of the ones that came with the Timbren kit, (TRF150D)



- TA25722-90P00
by:

I put these on a 2007 Tundra and this past summer it pulled work& play toy hauler from Pa. To Yellowstone and back with no issues. The truck handled the weight great.



- TA25722-90P00
by:

Product works great! Installed these on a 2018 Ford F150 that has a leveling kit. I didn't want the truck to sit below level in the rear when towing my trailer. I tried the Timben without these initially, and then purchased these to maintain the ride height I was looking for. Well worth the money.



- TA25722-90P00
by:

created the right spacing I need for the truck



- TA25722-90P00
by:

Love my Timbrens and been using them for years. These 1/2 spacers are handy to help dial in perfect ride height.



- TA25722-90P00
by:

The guys at e-trailer and Timbren are great. Needed 1/2” spacers for my Tundra for my timbren overloads and they had them to me in 2 days. They fit and work great. Exactly what I needed. Thanks.



- TA25722-90P00
by:

Etrailer has nothing but great products and this was no exception exactly what I needed



- TA25722-90P00
by:

Got the spacers I needed in two days Thank you etrailer!



- TA25722-90P00
by:

These things work great. Did just what I wanted them to do.



- TA25722-90P00
by:

Spacer is good to go but was sent a different one from what I ordered, called and got it straightened out and correct ones on the way. Thanks Paula!



- TA25722-90P00
by:

Needed product quickly and dependably to complete a customers truck in a timely fashion. E trailer came through as promised w the correct product and delivered on time.



- TA25722-90P00
by:

Work as expected.


29
39
Show More Reviews

Ask the Experts about this Timbren Accessories and Parts

  • How Does Lift Kit Spacer for Timbrens Fit into Kit that Fits 2019 Chevy Silverado 2500
    I attached a picture that shows how the Timbren # TGMRTT35D that you referenced gets assembled. The spacer # TA25722-90P00 you referenced would go between the numbers 2 and 3 and you'd be set. See attached picture. You will need to provide a longer bolt though so that it can all fit together. The same portion of the Timbren fits into the bump stop cup on your 2019 Chevy Silverado 2500HD.
    view full answer...
    Image 1 for
  • Does Timbren 1/2" Spacer Come with Longer Mounting Hardware
    The Timbren 1/2" Spacer # TA25722-90P00 comes in a quantity of 1 and only includes the spacer. If you require longer hardware then you'll need to visit your local hardware or home improvement store for that, which is actually the same thing we do when we install the spacers that don't already come with a suspension kit.
    view full answer...
  • Are the Spacers Required on the Timbren Front Suspension Enhancement if I Have a Leveling Kit
    The Timbren Front Suspension Enhancement System like part # TFXF1004A should be in constant contact with the front end. If you have a gap from your leveling kit then you will want to use the Timbren 1/2" Spacer for Raised Frame Vehicles part # TA25722-90P00 that you asked about. It is likely you will need them or the larger Timbren 1" Spacer For Raised Vehicles part # A25723-90AH00 to make up the difference.
    view full answer...
  • Is Longer Bolt Required When Installing Timbren Spacer Kit on a 2013 Chevy Silverado
    When we have installed the spacers like the part # TA25722-90P00 with a Timbren like part # TGMRCK25D on a lifted truck we had to go to a local hardware store to track down a longer nut and bolt. Check out the install video that shows a similar install with lift kit spacers.
    view full answer...
  • Is the 1/2" Spacer # TA25722-90P00 Compatible with the Timbren # TNRTTN on a 2017 Nissan Titan
    Yes, the Timbren 1/2" Spacer # TA25722-90P00 is compatible with the Timbren Rear Suspension Enhancement System # TNRTTN for your 2017 Nissan Titan. Please note that per the linked instructions for the suspension kit Timbren says that there should be a 1/2" - 1-1/2" gap between the rubber spring and contact point when there is no load in the vehicle. If you installed this kit and you have 1/2" of space then you actually won't need the spacer.
    view full answer...
  • Recommended Spacer For 2007 Toyota Tundra With Timbren Suspension Enhancement System
    Per the installation instructions for Timbren Suspension, part # TTORTUN4, you should have between 1/2 to 1-1/2 inches of clearance between the rubber spring and the contact point when empty. It sounds like you are at the upper part of that. I recommend using a 1/2 inch spacer like part # TA25722-90P00 since you said you are very close to 1/2 inch when your fifth wheel is loaded. This would eliminate the gap you have with the trailer and still not affect the empty ride.
    view full answer...
  • Are Timbren Spacers Required for a Leveling Kit on a 2020 Ford F-350
    It all depends on what Timbren kit you decide to use and how much space you have from where the Timbren kit installs to the contact point for your 2020 Frod F-350 Super Duty. For example, the Timbren Suspension Enhancement System # TFR350SDJ measures 7-1/2" tall altogether and Timbren states that you need to have 1/2" to 1-1/2" of a gap between the rubber spring and the contact point. If you measure from the place where your OEM bump stop sits down 7-1/2" and the gap that is left is...
    view full answer...
    Image 1 for
  • 2020 Ram 1500 Still Squats with Timbrens Installed
    The Timbren Rear Suspension Enhancement System part # TDR1500DQ is a good option for a 2020 Ram 1500. That said, it won't get rid of all squat since the suspension has to reach a threshold before they even engage. If you like, you can get rid of more squat by adding spacers to have them engage sooner, the Timbren Spacer part # TA25722-90P00 for 1/2" or part # A25723-90AH00 for 1". That said, the above can result in a rougher ride so a better option would indeed be stiffer coil springs,...
    view full answer...
    Image 1 for
  • Is a 2" Gap Too Much After Installing Timbren Rear Suspension Enhancement System
    The ideal gap between the bottom of the jounce bumper and top of the contact point is about 1/2"-1" but you can go more if you don't want them to engage as soon or as often. Therefore, in lifted applications you'll need to use spacer to get the gap down to where you want it or the recommended 1/2"-1". This can be done using the Timbren Spacers part # A25723-90AH00 for 1" and or part # TA25722-90P00 for 1/2". The spacers can be stacked and as you noted you'd need a longer bolt which can...
    view full answer...
  • Do I Need Spacers To Install Timbren Springs On 2020 Ford F-350 Super Duty With Lift
    To install the Timbren Suspension Enhancement System - Rear Axle part # TFR350SDJ on the 2020 Ford F-350 Super duty you will need spacers to make up the space from the lift. Timbren recommends having 1/2" to 1-1/2" of gap between the spring and the contact point. Measure from the spot where the OEM bump stop is installed down 7-1/2". The Timbren spring will be 7-1/2" long once installed. If you have more than a 1/2" space between that measurement and the contact point you will need a spacer. Depending...
    view full answer...
    Image 1 for Image 2 for
  • Height of Timbren SES Kit, # TGMRTT35D and Recommended Clearance Between Frame and Axle
    The single convoluted springs from the Timbren SES Kit # TGMRTT35D are only 3-9/16 inches tall, but this kit also includes a 1 inch spacer, so it will sit 4-9/16 inches below the jounce bumper holder on the frame. Timbren recommends a distance of 1 inch between the Timbren and the vehicle so you'd need a spacer setup based on what dimension you have now minus 5-9/16 inches. You can achieve this distance on trucks that are lifted using increments of the Timbren 1/2" Spacer part # TA25722-90P00...
    view full answer...
  • Suspension Enhancement to Reduce Sag on Lifted 2018 Ford F-150 When Towing
    The best way to fix the sag you are getting on your lifted 2018 Ford F-150 when towing a trailer is to use the Timbren Rear Suspension Enhancement System # TFR1504E which is designed for this exact situation - reduce the amount of sag on a truck when it is towing. The Timbrens will get more rigid with the more weight put on them and ensure your '18 F-150 does not sag as you tow. The issue is that you have a 6" lift, and assuming it is a suspension lift (and not a body lift) you can add...
    view full answer...
  • Can Timbren Suspension Enhancement Fit 2016 Ram 1500 with Lift Kit
    Yes, Timbren does offer spacers that allow a lifted truck like your 2016 Ram 1500 use a Timbren kit like the # TDR1500DQ and still have the correct amount of distance between the frame and the Timbren spring. For a 1 inch spacer you'd need the part # A25723-90AH00 and then for a 1/2 inch spacer you'd need the part # TA25722-90P00. The spacers are sold individually so you'd need to order a quantity that matches the space you need to take up for each side of the axle. So if the distance...
    view full answer...
  • Timbren Front Suspension Enhancement for Leveled 2019 Ford F-250
    For your 2019 Ford F-250 4WD with 2.5 level kit on the front, you will use the Timbren Front Suspension Enhancement System # TFF350SDC. You will then use 1 inch spacers like # A25723-90AH00 and 1/2 inch spacers # TA25722-90P00. You don't necessarily need 2-1/2 inches of spacers per side as these springs will help support at whatever level you desire.
    view full answer...
  • What Spacers are Available To Accommodate a 6" Lift on My 1995 Ford F-250
    Depending on the size of the bolt on your 1995 Ford F-250, we have a couple of options for spacers. Timbren does recommend 1/2" to 1 1/2" clearance between your Timbren and the contact point when the truck isn't under a load. The spacer is a solution if there is more than that clearance. If your bolt is a 1/2" bolt you will need the Timbren 1" Spacer For Raised Frame Vehicles - 1/2" bushing # TA25723-90AD00 or the Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing # TA25722-90F00. If...
    view full answer...
  • Recommended Rear Suspension Enhancement And Weight Distribution Hitch For 2010 Ford Ranger
    I definitely recommend going with the bump stop jounce-style springs that you are referring to as these require no maintenance and are very easy to install. They drastically reduce rear sag and also help with the overall handling of your truck. Your two options for your 2010 Ford Ranger are the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-113-40 and the Timbren Rear Suspension Enhancement System # TFRR050A. The SumoSprings have a weight capacity of 1,000lbs which would be good...
    view full answer...
  • Can Timbren Suspension Kit Install on 2003 Toyota Tacoma with 2.5 inch Lift
    Timbren does make spacers like the part # A25723-90AH00 for a 1 inch spacer and # TA25722-90P00 for a 1/2 inch spacer which you can use to take up extra space created by lift kits so that you can still use their suspension enhancement kits like the # TTORTAC4A that you referenced. You'd need to use an amount of spacers that takes up the added distance created by the lift. So in this case you'd need two 1-inch spacers and a 1/2 inch spacer per side of the vehicle.
    view full answer...
  • Are Timbren Spacers Required For A Leveling Kit On A 2020 Ford F-350
    If the rear suspension of your 2020 Ford F-350 is not lifted, you will not use the Timbren 1" Spacer # A25723-90AH00 when you install the Timbren Suspension Enhancement System part # TFR350SDJ A point to note however is that if the leveling kit does lift the rear of the truck then you will want to install increments of the part # A25723-90AH00 (1") and part # TA25722-90P00 (1/2") until there is 1/2" to 1" of space between the bottom of the timbren spring to the top of the contact point...
    view full answer...
  • Does 2020 Ford F-350 with Leveling Kit Need Spacers When Installing Timbren Suspension Kit
    Typically a leveling kit for the suspension of a truck like your 2020 Ford F-350 is a slight lift to the front suspension so that the front and rear of the truck is leveled. Higher rated trucks like yours have the rear suspension sitting up quite a bit taller since the suspension is beefed up more back there to compensate for the weight of cargo or a trailer. So with a Timbren kit like the # TFR350SDJ that fits your truck installed you wouldn't need any spacers as long as only the front...
    view full answer...
  • Spacers for Timbren Suspension Enhancement on 2020 Ford F-250 Super Duty
    It is possible you can use the Timbren Suspension Enhancement System # TFR350SDJ (which is made for a Ford F-350) on your 2020 Ford F-250, but we have never done this and it hasn't been tested so I just can't guarantee a good fit. There are spacers that will work with your F-250 and the Timbrens that are designed to fit it, the Timbren Suspension Enhancement System # TFR250SDJ. You can add spacers in increments or 1/2" or 1" with the Timbren 1/2" Spacer # TA25722-90P00 and Timbren...
    view full answer...
  • Spacers to Use for Timbren Kit on 2009 Ford Ranger to Take Up 1-1/2 inch of Space
    To get a total of 1-1/2 inch of spacer for your Timbren kit part # TFRR050A you'd need to use the 1 inch spacer part # A25723-90AH00 as well as a 1/2 inch spacer part # TA25722-90P00.
    view full answer...
  • Is the Timbren Suspension Enhancement System Compatible With Sulastic Shackles?
    You will be able to use the # TFR350SDJ Timbren Suspension Enhancement System with your Sulastic Shackles as long as you still have the correct clearance. The Timbren attaches to your frame rail in place of the existing bump stop. According to Timbren, there should be 1/2" to 1-1/2" of clearance between the rubber spring and the contact point on the axle. The # TFR350SDJ is 7-1/2" in overall length. If you measure from your existing bump stop attachment point to the axle and it is 8-9"...
    view full answer...
  • Will the SumoSprings Solo Custom Helper Springs Fit a Lifted 2019 Toyota Tundra TRD
    The compatibility of the SumoSprings Solo Custom Helper Springs part # SSR-610-47 with a lifted 2019 Toyota Tundra TRD will come down to the type of lift. If the distance between the jounce spring and contact point has changed then these would not be a good option. However, if the lift consist of just a lift block under the leaf spring pack then the above distance would not have changed therefore they would work. If you have any other type of lift then you'd want to consider the Timbren...
    view full answer...
  • Recommended Front Suspension Enhancement for 2014 Ford F-350 With 4-1/2 Inch Lift and Snow Plow
    Assuming you have the factory coil springs your best option will be the Firestone Coil-Rite Air Helper Springs # F4160. These are for the 4WD, if you have a 2WD then the # F4101 would be the correct part. These provide 1,000 lbs of load-leveling support by supporting your front coil springs. They will help to improve steering, braking, and headlight aim while reducing wear on your suspension. If you do not have the factory coil springs, your only option will be the Timbren Front Suspension...
    view full answer...
  • Which Spacers Will Work With Timbren Rear Suspension Enhancement System?
    If you have a lift/level kit on your 2015 Ram 1500 then you can use spacers. If you do not have a lift or level kit installed on your truck then you do not need spacers as the Timbren Rear Suspension Enhancement System # TDR1500DQ is not supposed to make contact with your axle until sufficient weight is added to the truck. With that being said, you can use Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing # A25723-90AH00 if you have 1" lift on your truck. You can also use Timbren...
    view full answer...
  • Lift Spacers For Timbren Suspension Enhancement On a 2002 Toyota Tacoma
    Due to the design of the Timbren Rear Suspension Enhancement System # TTORTAC4A on your 2002 Toyota Tacoma the screw that would normally sit in that position is welded on as you do not have access to the head of the screw when it is installed on your Tacoma. You have a couple options to get your Timbrens to function properly on your Tacoma. First you can drill out the welds and have longer screws welded in their place. This would allow you to use the 1" Spacers # A25723-90AH00 or 1/2"...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Using the Timbren Suspension Enhancement System On a Lifted 2015 Ford F-150
    We have both front and rear Timbren Suspension Enhancement Systems for your 2015 Ford F-150. For the front of your truck you will want to use part # TFF150G and for the rear you will want to use part # TFRTT1504E. Timbren recommends a distance of 1" from the bottom of the bump stop to the top of the contact point. You can achieve this distance on trucks that are lifted using increments of the Timbren 1/2" Spacer part # TA25722-90P00 and the Timbren 1" Spacer part # A25723-90AH00 until the...
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Written by:
Laura H
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.